aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/b43
AgeCommit message (Collapse)Author
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-02-27Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-02-26b43: fall back gracefully to PIO mode after fatal DMA errorsLinus Torvalds
This makes the b43 driver just automatically fall back to PIO mode when DMA doesn't work. The driver already told the user to do it, so rather than have the user reload the module with a new flag, just make the driver do it automatically. We keep the message as an indication that something is wrong, but now just automatically fall back to the hopefully working PIO case. (Some post-2.6.33 merge fixups by Larry Finger <Larry.Finger@lwfinger.net> and yours truly... -- JWL) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-14Merge branch 'master' of ↵David S. Miller
ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-02-08b43: remove get_tx_stats() mac80211 opKalle Valo
get_tx_stats() will be removed from mac80211. Compile-tested only. Cc: Stefano Brivio <stefano.brivio@polimi.it> Cc: Michael Buesch <mb@bu3sch.de> Cc: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-08b43: N-PHY: handle allocation fail in samples generationRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-08b43: N-PHY: load generated samplesRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-08b43: N-PHY: partly implement SPUR workaroundRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-08b43: N-PHY: save calibration for further restoreRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-08b43: N-PHY: prepare code for reapplying TX cal coeffsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-08b43: N-PHY: implement overriding RF control intcRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-08b43/b43legacy: Wake queues in wireless_core_startLarry Finger
If b43 or b43legacy are deauthenticated or disconnected, there is a possibility that a reconnection is tried with the queues stopped in mac80211. To prevent this, start the queues before setting STAT_INITIALIZED. In b43, a similar change has been in place (twice) in the wireless_core_init() routine. Remove the duplicate and add similar code to b43legacy. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> [2.6.32] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-08Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: net/mac80211/scan.c
2010-02-04Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-02-03b43: Fix throughput regressionLarry Finger
Commit c7ab5ef9bcd281135c21b4732c9be779585181be entitled "b43: implement short slot and basic rate handling" reduced the transmit throughput for my BCM4311 device from 18 Mb/s to 0.7 Mb/s. The basic rate handling portion is OK, the problem is in the short slot handling. Prior to this change, the short slot enable/disable routines were never called. Experimentation showed that the critical part was changing the value at offset 0x0010 in the shared memory. This is supposed to contain the 802.11 Slot Time in usec, but if it is changed from its initial value of zero, performance is destroyed. On the other hand, changing the value in the MMIO register corresponding to the Interframe Slot Time increased performance from 18 to 22 Mb/s. A BCM4306/3 also shows dramatic improvement of the transmit rate from 5.3 to 19.0 Mb/s. Other changes in the patch include removal of the magic number for the MMIO register, and allowing the slot time to be set for any PHY operating in the 2.4 GHz band. Previously, the routine was executed only for G PHYs. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> [Any stable version back through 2.6.28] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01b43: N-PHY: implement setting RF sequenceRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01b43: N-PHY: add TX radio setup for newer PHYsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01b43: N-PHY: fix Cal TX IQ LO for newer PHYsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01b43: N-PHY: add RSSI selection for newer PHYsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01b43: N-PHY: split RSSI selection into two per-PHY-revision functionsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01b43: N-PHY: add workarounds for gain controlRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01b43: N-PHY: update general workaroundsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-27b43: N PHY: Fix compilation after removal of typdef b43_c32Larry Finger
In the conversion between typedef and struct, two places that needed a "struct" were missed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-25b43: N-PHY: use cordic to generate samplesRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-25b43: update cordic code to match current specsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-25b43: make cordic common (LP-PHY and N-PHY need it)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-25b43: N-PHY: fix one bit off in parsing RF Ctrl Override argumentsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-25b43: Workaround circular locking in hw-tkip key update callbackMichael Buesch
The TKIP key update callback is called from the RX path, where the driver mutex is already locked. This results in a circular locking bug. Avoid this by removing the lock. Johannes noted that there is a separate bug: The callback still breaks on SDIO hardware, because SDIO hardware access needs to sleep, but we are not allowed to sleep in the callback due to mac80211's RCU locking. Signed-off-by: Michael Buesch <mb@bu3sch.de> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-by: kecsa@kutfo.hit.bme.hu Cc: Johannes Berg <johannes@sipsolutions.net> Cc: stable <stable@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-22b43: N-PHY: add TX toneRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-22b43: N-PHY: add setting power amplifier filtersRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-22b43: N-PHY: add running samplesRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-22b43: N-PHY: implement overriding RF controlRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-22b43: check band widthRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-22mac80211: pass vif and station to update_tkip_keyJohannes Berg
When a TKIP key is updated, we should pass the station pointer instead of just the address, since drivers can use that to store their own data. We also need to pass the virtual interface pointer. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19b43: N-PHY: silence warnings, add missing callRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19b43: N-PHY: implement and add multi-dimensional table readingRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19b43: N-PHY: implement and add reading one element tablesRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19b43: N-PHY: implement and add multi-dimensional table writingRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19b43: N-PHY: add writing one element tablesRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19b43: N-PHY: store seq mode for proper restoring (follow specs)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19b43: N-PHY: move RF sequence declarations top, add missing callsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19b43: N-PHY: implement chain selectionRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19b43: N-PHY: implement stopping playbackRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19b43: N-PHY: implement MIMO config updateRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19b43: N-PHY: implement TX PHY cleanup and setupRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19b43: N-PHY: implement RX PHY cleanup and setupRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-core.h
2010-01-15b43: N-PHY: drop unused definition, uncomment needed callRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: implement TX power control coef setupRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: add RX IQ calibrationi for rev < 3Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-10 06:21:05 +0000