aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/bcm43xx
AgeCommit message (Collapse)Author
2006-07-27[PATCH] softmac: do shared key auth in workqueueDaniel Drake
Johann Uhrmann reported a bcm43xx crash and Michael Buesch tracked it down to a problem with the new shared key auth code (recursive calls into the driver) This patch (effectively Michael's patch with a couple of small modifications) solves the problem by sending the authentication challenge response frame from a workqueue entry. I also removed a lone \n from the bcm43xx messages relating to authentication mode - this small change was previously discussed but not patched in. Signed-off-by: Daniel Drake <dsd@gentoo.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-10[PATCH] bcm43xx-softmac: Fix an off-by-one condition in handle_irq_noiseLarry Finger
An assert statement near the start of handle_irq_noise in the softmac version of bcm43xx_main.c is there to protect against out of bound addressing using variable bcm->noisecalc.nr_samples. The arrays in question have a dimension of 8, thus the value must be < 8. Signed-Off-By: Larry.Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-05[PATCH] bcm43xx: enable shared key authenticationDaniel Drake
I recently patched softmac to enable shared key authentication. This small patch will enable crazy or unfortunate bcm43xx users to use this new capability. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-05[PATCH] Convert bcm43xx-softmac to use the ieee80211_is_valid_channel routineLarry Finger
The current version of bcm43xx-softmac uses local routines to check if a channel is valid. As noted in the comments, these routines do not take any regulatory information into account. This patch converts the code to use the equivalent routine in ieee80211, which is being converted to know about regulatory information. Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-05[PATCH] bcm43xx: workaround init_board vs. IRQ raceMichael Buesch
Place the Init-vs-IRQ workaround before any card register access, because we might not have the wireless core mapped at all times in init. So this will result in a Machine Check caused by a bus error. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-05[PATCH] bcm43xx: use softmac-suggested TX rateDaniel Drake
Use Softmac-suggested TX ratecode: ieee80211softmac_suggest_txrate() Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-03kbuild: introduce utsrelease.hSam Ravnborg
include/linux/version.h contained both actual KERNEL version and UTS_RELEASE that contains a subset from git SHA1 for when kernel was compiled as part of a git repository. This had the unfortunate side-effect that all files including version.h would be recompiled when some git changes was made due to changes SHA1. Split it out so we keep independent parts in separate files. Also update checkversion.pl script to no longer check for UTS_RELEASE. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-07-02[PATCH] irq-flags: drivers/net: Use the new IRQF_ constantsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26[PATCH] Add bcm43xx HW RNG supportMichael Buesch
Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-15[PATCH] pci: bcm43xx avoid pci_find_deviceJiri Slaby
bcm43xx avoid pci_find_device Change pci_find_device to safer pci_get_device with support for more devices. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-15[PATCH] bcm43xx: preemptible periodic workMichael Buesch
Make the heavy periodic work preemptible to avoid disabling local IRQs for several msecs. Signed-off-by: Michael Buesch <mb@buesch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-15[PATCH] bcm43xx: redesign lockingMichael Buesch
Redesign the bcm43xx locking. This is pre-work to get a preemptible periodic work handler. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-05[PATCH] bcm43xx: quiet down log spam from set_securityJason Lunz
The debug logging in bcm43xx_ieee80211_set_security() is pretty noisy. Make it more silent. Signed-off-by: Jason Lunz <lunz@falooley.org> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-05Merge branch 'upstream-fixes' into upstreamJohn W. Linville
2006-06-05[PATCH] bcm43xx: add DMA rx poll workaround to DMA4Michael Buesch
Also add the Poll RX DMA Memory workaround to the DMA4 (xmitstatus) path. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-05-17Merge branch 'upstream-fixes' into upstreamJohn W. Linville
2006-05-17[PATCH] bcm43xx: associate on 'ifconfig up'David Woodhouse
I still need this hack to work around the fact that softmac doesn't attempt to associate when we bring the device up... Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-05-05[PATCH] bcm43xx: add PCI ID for bcm4319Stefano Brivio
Add PCI ID for bcm4319. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-05-05[PATCH] bcm43xx: fix whitespaceStefano Brivio
Fix whitespace. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-05-05Merge branch 'upstream-fixes' into upstreamJohn W. Linville
2006-05-05[PATCH] bcm43xx: Fix access to non-existent PHY registersDavid Woodhouse
Fix the conditions under which we poke at the APHY registers in bcm43xx_phy_initg() to avoid a machine check on chips where they don't exist. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-05-05[PATCH] bcm43xx: Fix array overrun in bcm43xx_geo_initMichael Buesch
The problem here is that the bcm34xx driver and the ieee80211 stack do not agree on what channels are possible for 802.11a. The ieee80211 stack only wants channels between 34 and 165, while the bcm43xx driver accepts anything from 0 to 200. I made the bcm43xx driver comply with the ieee80211 stack expectations, by using the proper constants. Signed-off-by: Jean Delvare <jdelvare@suse.de> [mb]: Reduce stack usage by kzalloc-ing ieee80211_geo Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-05-05[PATCH] bcm43xx: check for valid MAC address in SPROMStefano Brivio
Check for valid MAC address in SPROM fields instead of relying on PHY type while setting the MAC address in the networking subsystem, as some devices have multiple PHYs. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-05-05[PATCH] bcm43xx: fix iwmode crash when downMichael Buesch
This fixes a crash when iwconfig ethX mode foo is done before ifconfig ethX up or after ifconfig ethX down Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-24[PATCH] bcm43xx: use pci_iomap() for convenience.Michael Buesch
This reduces codesize. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-24[PATCH] bcm43xx: make PIO mode usableMichael Buesch
This patch fixes PIO mode on the softmac bcm43xx driver. (A dscape patch will follow). It mainly fixes endianess issues. This patch is tested on PowerPC32 and i386. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-19[PATCH] bcm43xx: iw_priv_args names should be <16 charactersErik Mouw
The room for the names in bcm43xx_priv_wx_args[] are IFNAMSIZ long and IFNAMSIZ is defined as 16, so the names in bcm43xx_priv_wx_args should be 15 characters (16 including the trailing \0). This patch fixes that for the "set_shortpreambl", "get_shortpreambl", "set_swencryption", and "get_swencryption" private calls. Patch is against 2.6.17-rc1. Signed-off-by: Erik Mouw <erik@harddisk-recovery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-19[PATCH] bcm43xx: sysfs code cleanupMichael Buesch
This cleans up the bcm43xx sysfs code and makes it compliant with the unwritten sysfs rules (at least I hope so). Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-19[PATCH] bcm43xx: fix pctl slowclock limit calculationMichael Buesch
This fixes coverity bug: http://marc.theaimsgroup.com/?l=linux-netdev&m=114417628413880&w=2 Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-19[PATCH] bcm43xx: fix dyn tssi2dbm memleakAdrian Bunk
This patch fixes a memory leak spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-19[PATCH] bcm43xx: fix config menu alignmentRandy Dunlap
Use "depends on" to make all bcm43xx driver options be listed at the same level. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-19[PATCH] bcm43xx wireless: fix printk format warningsRandy Dunlap
Fix printk format warnings: drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c:456: warning: format ‘%u’ expects type ‘unsigned int’, but argument 3 has type ‘size_t’ drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c:460: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘size_t’ drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c:476: warning: format ‘%u’ expects type ‘unsigned int’, but argument 3 has type ‘size_t’ drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c:480: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘size_t’ drivers/net/wireless/bcm43xx/bcm43xx_dma.c:200: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘dma_addr_t’ drivers/net/wireless/bcm43xx/bcm43xx_dma.c:311: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘dma_addr_t’ drivers/net/wireless/bcm43xx/bcm43xx_dma.c:733: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘dma_addr_t’ Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-19[PATCH] bcm43xx: set trans_start on TX to prevent bogus timeoutsMichael Buesch
Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: don't set the channel on a device, which is down.Michael Buesch
Initial patch by David Woodhouse and Michael Marineau. Locking fix by me. Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: sync GPHY init with the specs.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: fix the remaining sparse warnings.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: remove some compilerwarnings.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: fix "include" issues on some platforms.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: get rid of "/* vim: ..." lines at the end of several files.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: add useless and broken statistics stuff. People seem to ↵Michael Buesch
want it. well... Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: fix nrssi_threshold calculation.Michael Buesch
patch by doctorzoidberg. Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: sync interference mitigation code to the specs.Michael Buesch
This also includes a rewritten valuesave-stack. Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: set default attenuation values.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: some IRQ handler cleanups.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: merge all iwmode code into the set_iwmode function.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: fix some gpio register trashing (hopefully :D)Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: remove check for mmio length, as it differs among ↵Michael Buesch
platforms. (especially embedded) Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: properly mask txctl1 before writing it to hardware.Michael Buesch
This should not make a difference, but be careful to not trash the register. Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: Do boardflags workarounds for specific boards.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: Remove the workaround in dummy_transmission,Michael Buesch
as it causes more trouble than it solves Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-22 23:33:21 +0000