aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwmc3200wifi
AgeCommit message (Collapse)Author
2009-09-01iwmc3200wifi: Add a last_fw_err debugfs entrySamuel Ortiz
In order to check what was the last fw error we got accross resets, we add this debugfs entry. It displays the complete ASSERT information. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-01iwmc3200wifi: Handle UMAC stalls and UMAC assert properlySamuel Ortiz
When UMAC stalls or asserts, we want to reset the device. But when we're associated, the current reset worker will end up calling cfg80211_connect_result() with the cfg80211 sme layer knowing that we're reassociating. That ends up with some ugly warnings. With this patch we're telling the upper layer that we've roamed if reassociation succeeds, and that we're disconnected if it fails. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-01iwmc3200wifi: New initial LMAC calibrationSamuel Ortiz
The LMAC calibration API got broken mostly by having a configuration bitmap being different than the result one. This patch tries to address that issue by correctly running calibrations with the newest firmwares, and keeping a backward compatibility fallback path for older firmwares, where the configuration and result bitmaps were identical. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-01iwmc3200wifi: fix misuse of le16_to_cpuZhu Yi
Also mark some functions static. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-01iwmc3200wifi: add disconnect workZhu Yi
When the driver receives "connection terminated" event from device, it could be caused by 2 reasons: the firmware is roaming or the connection is lost (AP disappears). For the former, an association complete event is supposed to come within 3 seconds. For the latter, the driver won't receive any event except the connection terminated. So we kick a delayed work (5*HZ) when we receive the connection terminated event. It will be canceled if it turns out to be a roaming event later. Otherwise we notify SME and userspace the disconnection. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-01iwmc3200wifi: use cfg80211_roamed to send roam eventZhu Yi
The device sends connection terminated and [re]association success (or failure) events when roaming occours. The patch uses cfg80211_roamed instead of cfg80211_connect_result to notify SME for roaming. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-01iwmc3200wifi: Fix sparse warningSamuel Ortiz
iwm_cfg80211_get_station() should be static. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-01iwmc3200wifi: Set WEP key from connectSamuel Ortiz
When connect is called with the LEGACY_PSK authentication type set, and a proper sme->key, we need to set the WEP key straight after setting the profile otherwise the authentication will never start. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-01iwmc3200wifi: invalidate profile when necessary before connectZhu Yi
If cfg80211 requests to connect when we have already had an active profile, invalidate the current profile first before sending a new profile to UMAC. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-12Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: arch/microblaze/include/asm/socket.h
2009-08-04iwmc3200wifi: avoid setting default key for 802.1X and RSNAZhu Yi
UMAC only allows us to set default key for WEP and auth type is not 802.1X or RSNA. This patch fixes iwmc3200wifi for 802.1X with WEP104. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04iwmc3200wifi: set WEP key static flag correctlyZhu Yi
We should only set the static_key flag for open and legacy authentication types. It should not be set for 802.1X and TKIP. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04iwmc3200wifi: fix set_wpa_version and set_auth_type orderZhu Yi
iwm->umac_profile->sec.flags is set by iwm_set_wpa_version and checked by iwm_set_auth_type. The patch changes the order to make the flag used correctly. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-03drivers/net/wireless: introduce missing kfreeJulia Lawall
Error handling code following a kzalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-30Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-07-30Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-3945.h drivers/net/wireless/iwlwifi/iwl-tx.c drivers/net/wireless/iwlwifi/iwl3945-base.c
2009-07-29cfg80211: self-contained wext handling where possibleJohannes Berg
Finally! This is what you've all been waiting for! This patch makes cfg80211 take care of wext emulation _completely_ by itself, drivers that don't need things cfg80211 doesn't do yet don't even need to be aware of wireless extensions. This means we can also clean up mac80211's and iwm's Kconfig and make it possible to build them w/o wext now! RIP wext. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-29cfg80211: combine IWESSID handlersJohannes Berg
Since we now have handlers IWESSID for all modes, we can combine them into one. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-29cfg80211: combine IWAP handlersJohannes Berg
Since we now have IWAP handlers for all modes, we can combine them into one. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-29cfg80211: combine iwfreq implementationsJohannes Berg
Until now we implemented iwfreq for managed mode, we needed to keep the implementations separate, but now that we have all versions implemented we can combine them and export just one handler. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-27wireless: ERR_PTR vs nullDan Carpenter
iwm_wdev_alloc() returns an ERR_PTR on failure and not null. It also prints its own dev_err() message so I removed that as well. Compile tested only. Sorry. Found by smatch (http://repo.or.cz/w/smatch.git). Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-26imwc3200: move iwmc3200 SDIO ids to sdio_ids.hTomas Winkler
1. add intel's sdio vendor id to sdio_ids.h 2. move iwmc3200 sdio devices' ids to sdio_ids.h Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-24iwmc3200wifi: fix a use-after-free bugZhu Yi
The patch fixes a use-after-free bug for cmd->seq_num; Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: fix cfg80211_connect_result is called in IBSSZhu Yi
Avoid calling cfg80211_connect_result() in IBSS mode. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: use cfg80211_connect_result to send req/resp IEZhu Yi
cfg80211_connect_result() let us specify associate request and response IEs as parameters after we are connected. We use this capability instead of doing it ourselves with WEXT. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: remove key caches in driverZhu Yi
cfg80211 now guarantees keys are set after connecting. We can remove the key cache code from the driver now. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: make iwm_send_wifi_if_cmd return 0 on successZhu Yi
We used to return the result of wait_event_interruptible_timeout() which is the remaining timeout on success. But this information is not used by any of its callers. So we just return 0 on success. This fixed a erroneous return value bug for iwm_set_key(). Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: remove setting WEP keys before setting essid supportZhu Yi
The recent cfg80211 "rework key operation" patch from Johannes Berg makes sure keys are set only after the connection has been established. So we can remove the setting WEP keys before essid support from the driver. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: cfg80211 managed mode portSamuel Ortiz
This patch ports iwmc3200wifi to the cfg80211 managed mode API. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: use correct debug levelZhu Yi
This patch uses TX and RX instead of NTF debug levels in some hot paths. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: set cipher_suites before registering wiphyZhu Yi
We need to specify all the cipher suites we supported. Otherwise cfg80211_validate_key_settings() will fail when we are setting keys. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: hardware does not support IP checksumZhu Yi
The iwmc3200wifi hardware doesn't support IP checksum. So mark the skb->ip_summed to CHECKSUM_NONE instead of CHECKSUM_UNNECESSARY. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24iwmc3200wifi: fix UMAC INIT_COMPLETE notification handlingZhu Yi
The patch fixes the missing UMAC iwm_umac_wifi_in_hdr header in the UMAC INIT_COMPLETE (iwm_umac_notif_init_complete) notification. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-23Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwmc3200wifi/netdev.c net/wireless/scan.c
2009-07-21iwmc3200wifi: fix NULL pointer dereference in iwm_if_freeZhu Yi
The driver private data is now based on wiphy. So we should not touch the private data after wiphy_free() is called. The patch fixes the potential NULL pointer dereference by making the iwm_wdev_free() the last one on the interface removal path. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10iwmc3200wifi: remove B0 hardware supportZhu Yi
The patch removes B0 hardware support. Nobody is using it anyway. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10iwmc3200wifi: simplify calibration mapZhu Yi
The patch simplifies calibration map by combining the init_calib_map and periodic_calib_map into one calib_map in struct iwm_conf. Now the initial calibration map is stored in the lower 16 bits of calib_map and the periodic calibration map is stored in the higher 16 bits. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10iwmc3200wifi: replace netif_rx with netif_rx_niZhu Yi
The patch uses netif_rx_ni() over netif_rx() to post buffers to upper network code because it is always scheduled in a workqueue. The problem was first observed from a dynamic ticks warning: "NOHZ: local_softirq_pending ..." Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: implement iwpowerJohannes Berg
Just on/off and timeout, and with a hacky cfg80211 method until we figure out what we want, though this is probably sufficient as we want to use pm_qos for wifi everywhere. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10iwmc3200wifi: rfkill cleanupZhu Yi
The patch cleans up the unused rfkill related structures and flags. It also adds wext and cfg80211 handlers for txpower auto and off so that software rfkill could be issued by user space. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10iwmc3200wifi: cache keys when interface is downSamuel Ortiz
When the interface is down and one sets a WEP key from userspace, we should be able to simply cache it. Since that implies setting part of the profile's security settings, we now alloc/free the umac_profile at probe/remove time, and no longer at interface bring up/down time. Simply resetting it during the latter is enough. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10iwmc3200wifi: change coexist periodic calibration flagZhu Yi
The patch changes coexist periodic calibration priority flag. It also set wireless mode to UMAC and set PM control flag to 0x1. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10iwmc3200wifi: cfg80211 key hooks implemetationSamuel Ortiz
This patch implements the new cfg80211 privacy related hooks: add/get/set_key and the set_default_key one. With this implementation we can now call the wext-compat *encode* routines and reduce our own wext code. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10iwmc3200wifi: handling wifi_if_ntfy responsesSamuel Ortiz
When we're calling iwm_send_wifi_if_cmd() with the resp flag set, we're currently waiting on the mlme queue, waiting for some flags here and there to show up. This patch adds a wifi_ntfy bitmap, and when we're sending a wifi_if command expecting an answers, we wait synchronously for it to show up, on a dedicated queue. The wifi_ntfy bit is set when we receive the corresponding answer. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10iwmc3200wifi: invalidate keys when changing the BSSIDSamuel Ortiz
While associated, we have to invalidate our key cache if we clear our BSSID through siwap. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: pass netdev to change_virtual_intfJohannes Berg
If there was a reason I'm passing the ifidx I cannot remember it any more and don't see one now, so let's just pass the pointer itself. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07iwmc3200wifi: add Kconfig helpSamuel Ortiz
We're missing a Kconfig help for the iwmc3200wifi driver. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-19iwmc3200wifi: add a mutex to protect iwm_reset_workerZhu Yi
The patch adds a mutex to protect the iwm_reset_worker against netdev ndo_open and ndo_stop because all of them call iwm_up and iwm_down in the implementation. Note the latter two are already protected by rtnl. So if iwm_reset_worker is not required in the future, the mutex can also be removed. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-19iwmc3200wifi: fix potential kernel oops on module removalZhu Yi
The iwm_if_free() is called before destroy_workqueue for isr_wq on device remove method. But if there is still some pending work in the isr_wq, the required data structures are already freed at this point. This leeds a kernel oops. The patch fixes this problem by moving iwm_if_free after destroy_workqueue. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-19iwmc3200wifi: add iwm_if_add and iwm_if_removeZhu Yi
We used to do alloc_netdev and register_netdev at the same time in iwm_if_alloc. But some bus related structures will only be initialized after iwm_priv is allocated. This caused a race condition that the netdev might be registered earlier. The patch adds iwm_if_add and iwm_if_remove so that the bus layer could register the device after all initialization is done. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-15 15:47:19 +0000