aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/libertas/defs.h
AgeCommit message (Collapse)Author
2008-11-21libertas: Fine grained configuration of wake-on-lan.Anna Neal
Based on a patch from Shailendra Govardhan <shailen@marvell.com>. This patch allows implementation of more specific wake-on-lan rules than those of ethtool. Please note that only firmware 5.110.22.p20 and above supports this feature. This patch only implements the driver/firmware interface, not the userspace/driver interface. Signed-off-by: Anna Neal <anna@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10net: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Acked-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-30libertas: Improvements on automatic tx power control via SIOCSIWTXPOW (fixups)Anna Neal
This patch addresses comments from Dan Williams about the patch committed as "libertas: Improvements on automatic tx power control via SIOCSIWTXPOW." Signed-off-by: Anna Neal <anna@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-15libertas: convert SNMP_MIB to a direct commandDan Williams
And support setting both long and short retries independently. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11libertas: Improvements on automatic tx power control via SIOCSIWTXPOW.Anna Neal
iwconfig txpower can now be used to set tx power to fixed or auto. If set to auto the default firmware settings are used. The command CMD_802_11_PA_CFG is only sent to older firmware, as Dan Williams noted the command was no longer supported in firmware V9+. Signed-off-by: Anna Neal <anna@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22libertas: support boot commands to write persistent firmware and bootloaderBrian Cavagnolo
Add locking and non-locking versions of if_usb_prog_firmware to support programming firmware after and before driver bring-up respectively. Add more suitable error codes for firmware programming process. Add capability checks for persistent features before attempting to use them. Based on patches from Brajesh Dave and Priyank Singh. Signed-off-by: Brian Cavagnolo <brian@cozybit.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21libertas: sysfs interface for accessing non-volatile configurationJavier Cardona
This will create the following sysfs directories: /sys/class/net/mshX ... |-- boot_options | |-- bootflag | `-- boottime ... |-- mesh_ie | |-- capability | |-- mesh_id | |-- metric_id | `-- protocol_id Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21libertas: Extend MESH_CONFIG command to access non-volatile configurationJavier Cardona
This patch is based on a patch from Shailendra Govardhan and Brian Cavagnolo. It extends the MESH_CONFIG command to configure non-volatile parameters on libertas devices that support them (e.g. OLPC Active Antenna). This patch only implements the driver/firmware interface. See http://dev.laptop.org/ticket/6823 for minimal testing results and known issues. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-16libertas: convert libertas driver to use an event/cmdresp queueHolger Schurig
This patch (co-developed by Dan Williams and Holger Schurig) uses a kfifo object for events and a swapping buffer scheme for the command response to preserve the zero-copy semantics of the CF driver and keep memory usage low. The main thread should only ever touch the buffer indexed by priv->resp_idx, while the interface code is free to write to the second buffer, then swap priv->resp_idx under the driver spinlock. The firmware specs only permit one in-flight command, so there will only ever be one command response to process at a time. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-27libertas: reduce debug outputHolger Schurig
This patch tries to make dmesg logs between different runs easier to compare by * removing the jiffies (use CONFIG_PRINTK_TIME if you need timing) * remove the line numbers, they change with each applied patch It also changes the deprecated __FUNCTION__ to __func__ to make checkpatch.pl happy. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: add lbs_host_sleep_cfg() command functionDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: rename and re-type bufvirtualaddr to cmdbufDan Williams
Make it a struct cmd_header, since that's what it is, and clean up the places that it's used. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: kill (IS,SET,UNSET)_MESH_FRAME.David Woodhouse
No need for these any more. We've collapsed all the unneeded nests of functions which needed to keep track of which device the skb belonged to. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: remove arbitrary typedefsHolger Schurig
New typedefs are usually frowned upon. This patch changes libertas_adapter -> struct libertas_adapter libertas_priv -> struct libertas_priv While passing, make everything checkpatch.pl-clean that gets touches. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: move to uniform lbs_/LBS_ namespaceHolger Schurig
This patch unifies the namespace of variables, functions defines and structures. It does: - rename libertas_XXX to lbs_XXX - rename LIBERTAS_XXX to lbs_XXX - rename wlan_XXX to lbs_XXX - rename WLAN_XXX to LBS_XXX (but only those that were defined in libertas-local *.h files, e.g. not defines from net/ieee80211.h) While passing, I fixed some checkpatch.pl errors too. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-17net: libertas sdio driverPierre Ossman
Add driver for Marvell's Libertas 8385 and 8686 wifi chips. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Acked-by: Dan Williams <dcbw@redhat.com>
2007-10-10[PATCH] libertas: make the hex dumper nicerHolger Schurig
Currently, when you define LBS_DEB_HEX, you get every hex dump in the whole driver, e.g. for LBS_DEB_CMD, LBS_DEB_RX, LBS_DEB_TX etc. This patch makes sure that you only get the hexdump that you're interested in. Renamed lbs_dbg_hex() into lbs_deb_hex(), like the other lbs_deb_XXX() macros. Made lbs_deb_hex() issue a line feed (and a new prompt) after 16 bytes. As lbs_deb_hex() now prints the ":" after the prompt by itself, removed the misc colons in the various *.c files. lbs_deb_XXX() now print the debug category as well. As lbs_deb_XXX() --- and especially lbs_deb_11d() --- now print the category, I removed various "11D:" prefixes in 11d.c as well. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: remove debugmodeHolger Schurig
There is nowhere any place that set's this variable. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: uppercase some #definesHolger Schurig
Usually constants defined by #define are in ALL_UPPERCASE. This patch fixes this. I also shuffled the bits around so that they match the bit positions in the host-interrupt-state register of the CF/SDIO card :-) Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: simplify and clean up data rate handlingDan Williams
Remove unused/duplicated fields and consolidate static data rate arrays, for example the libertas_supported_rates[] and datarates[] arrays in the bss_descriptor structure, and the libertas_supported_rates field in the wlan_adapter structure. Introduce libertas_fw_index_to_data_rate and libertas_data_rate_to_fw_index functions and use them everywhere firmware requires a rate index rather than a rate array. The firmware requires the 4 basic rates to have the MSB set, but most other stuff doesn't, like WEXT and mesh ioctls. Therefore, only set the MSB on basic rates when pushing rate arrays to firmware instead of doing a ton of (rate & 0x7f) everywhere. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: re-uppercase command defines and other constantsDan Williams
For readability. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: specific mesh scan for mshX interfaceLuis Carlos Cobo
With this patch, scanning with mshX interface will only return mesh networks. To differentiate them, a specific mesh IE in beacons/probe responses is used. This IE has been introduced in firmware release 5.110.14. Note: Even though there can be at most a single mesh per channel, this scan might return several networks in the same channel. If all nodes in a mesh network are associated to an AP, they won't produce beacons/probe responses, thus the network will not be listed. This will be fixed in future firmware releases. Scan on ethX interface is not filtered, so it will list both mesh and non-mesh networks. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: rename WLAN_802_11_KEY to enc_key and clean up usageDan Williams
It doesn't touch hardware and therefore doesn't need endian notations either. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: make scan result handling more flexibleDan Williams
- use a linked list for scan results - age scan results - pass bss_descriptors around instead of indexes into the scan table - lock access to the scan results - stop returning EAGAIN from SIOCGIWSCAN handler Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: updated mesh commands for 5.220.9.p11Luis Carlos Cobo
Updated commands fwt_add and fwt_list, bt_list. New commands: bt_get_invert, bt_set_invert, to invert the blinding table, i.e., receive only frames from nodes listed in the BT. This patch needs/is needed for firmware 5.220.9.p11. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: let DRV_NAME be overridableHolger Schurig
For now, it's "libertas" by default, but that is overwritten in if_usb.c/if_bootcmd.c and in if_cs.c. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: indirect all hardware access via hw_XXXX functionsHolger Schurig
This functions makes all libertas_sbi_XXX functions static to the if_usb.c file and renames them to if_usb_XXXX(). The get called from other places of the source code via priv->hw_XXXX(). Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: change debug output of libertas_interrupt()Holger Schurig
It used to be LBS_DEB_MAIN, now it's LBS_DEB_THREAD Also fixed a missing ":" in lbs_deb_enter() Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: tune debug codeHolger Schurig
* renamed module parameter back to libertas_debug * change from bit shifts to constants, that way it's easier to look at the source and specify the libertas_debug=0xXXXX module parameter * moved module_param from fw.c to main.c, where it belongs better Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: make debug configurableHolger Schurig
The debug output of libertas was either not present or it was overwhelming. This patch adds the possibility to specify a bitmask for the area of interest. One should then only get the desired output. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: make libertas_wlan_data_rates staticHolger Schurig
Move libertas_wlan_data_rates into wext.c and make it static. wext.c is the only user of this array. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: remove __FILE__ from debug outputHolger Schurig
Remove filename from debug output because it's way too long. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-05-11[PATCH] libertas: Clean up debug definesDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-05-11[PATCH] libertas: remove WLAN_802_11_NETWORK_INFRASTRUCTURE enumDan Williams
Use standard IW_MODE_* constants instead. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-05-11[PATCH] libertas: remove WLAN_802_11_WEP_STATUS enumDan Williams
Also change WEPstatus to "wep_enabled"; it's clearer and consistent with the WPAenabled and WPA2enabled members. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-05-11[PATCH] libertas: remove WLAN_802_11_AUTHENTICATION_MODEDan Williams
Remove WLAN_802_11_AUTHENTICATION_MODE enum and use IW_AUTH_ALG_* instead. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-05-11[PATCH] libertas: remove custom encryption mode stuffDan Williams
Remove setencryptionmode private ioctl and Encryptionmode variable. Mostly unused, and its functionality is provided by other internal members like WEPstatus, WPAenabled, WPA2enabled, and SIOCSIWGENIE. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-05-11[PATCH] libertas: remove setauthalg private ioctlDan Williams
Obsoleted by SIOCSIWAUTH's IW_AUTH_80211_AUTH_ALG option introduced by WE-18. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-05-11[PATCH] libertas: remove 8021xauthalgs private ioctlDan Williams
Useless; it set an internal variable that was unused anyway. A supplicant handles all 802.1x authentication, not the driver. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28[PATCH] Marvell Libertas 8388 802.11b/g USB driverMarcelo Tosatti
Add the Marvell Libertas 8388 802.11 USB driver. Signed-off-by: Marcelo Tosatti <marcelo@kvack.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 05:38:11 +0000