aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/p54
AgeCommit message (Collapse)Author
2009-04-22p54: fix ps-poll delivery in ap modeChristian Lamparter
PS-Polled frames must be sent with OUT_NOCANCEL flag set, or the firmware will reject all of them, at the station is still blacklisted. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54: deactivate broken powersave function (part 2)Christian Lamparter
This patch deactivates powersave in station mode. It does not work correctly yet, so the code does more harm than good. (I split the original patch and sent part of it for 2.6.30, which didn't have the IEEE80211_HW_BEACON_FILTER flag. -- JWL) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54: remove module_ stubsChristian Lamparter
Christoph Hellwig pointed out that these stubs are unnecessary. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54: remove obsolet signal quality calculationChristian Lamparter
The signal quality percentage is now calculated by mac80211 stack. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54: utilize all available key slots for decryption offloadChristian Lamparter
This patch takes care of outstanding TODOs: /* TODO: some devices have 4 more free slots for rx keys */ Now the driver can utilize all available key slots instead of just 4. Obviously, this helps most in AP/IBSS(/MESH) mode, when we have to use more different keys. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54spi: get rid of busy-wait loopsMax Filippov
p54spi_wakeup and p54spi_tx_frame used busy-waiting loop to poll for 'ready' bits in SPI_ADRS_HOST_INTERRUPTS register. With this change in place 'WR_READY timeout' messages do not show anymore. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54: add beacon filtering supportChristian Lamparter
This patch adds beacon filtering support to p54. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54: more SoftLED updatesChristian Lamparter
This patch hopefully finishes the SoftLED code: - It adds two more LEDs (rx and radio). (the FW claims it can support up to 16 LEDs, but I doubt that any vendor put more than 4 on a board) - update the LEDs in a _delayed_ workqueue. No one reported any more crashes. (see: "PATCH] p54: fix race condition in memory management") So we can stop burning the mm code. Signed-off-by: Christian Lamparter <chunkeey@web.de> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54: clean up p54.h's struct p54_commonChristian Lamparter
This patch rearrange and regroups most elements in p54_common. Signed-off-by: Christian Lamparter <chunkeey@web.de> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54spi: compensate firmware alignment bug in p54spi_rxMax Filippov
Firmware may insert up to 4 padding bytes after the lmac header, but it does not amend the size of SPI data transfer. Such packets has correct data size in header, thus referencing past the end of allocated skb. Put extra 4 bytes to the end of the received skb to compensate for this case. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54spi: fix p54spi_tx_frame DMA transfer initiation and skb cleanupMax Filippov
p54spi_tx_frame wasn't waiting for HOST_ALLOWED in SPI_ADRS_DMA_WRITE_CTRL. This resulted in frequent 'WR_READY timeout' on beacon resubmission. Also don't free skb on error path, as it gets freed on p54spi_wq_tx. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54spi: fix p54spi_upload_firmwareMax Filippov
Instead of firmware itself p54_upload_firmware was sending to the device content of struct firmware and the following random garbage. Notice '&' before priv->firmware->data at p54spi_spi_write. But simple removing of '&' sign triggered BUG_ON at dma_cache_maint. Thus kmemdup - kfree workaround. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54spi: mask value read from SPI_ADRS_DMA_WRITE_CTRL in p54spi_wait_bitMax Filippov
Mask value read from SPI_ADRS_DMA_WRITE_CTRL in p54spi_wait_bit. Without this, 'fw_upload not allowed to DMA write' is observed at both N800 and N810. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-20p54: deactivate broken powersave functionChristian Lamparter
This patch deactivates powersave in station mode. It does not work correctly yet, so the code does more harm than good. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-16p54usb: add Telsey 802.11g USB2.0 AdapterChristian Lamparter
Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-16p54spi: fix locking warning in p54spi_op_txChristian Lamparter
This patch fixes the following waring: > ------------[ cut here ]------------ >WARNING: at kernel/softirq.c:138 local_bh_enable+0x54/0xbc() >Modules linked in: p54spi >[<c0034ff8>] (dump_stack+0x0/0x14) >[<c005b1a4>] (warn_on_slowpath+0x0/0x68) >[<c00604c8>] (local_bh_enable+0x0/0xbc) >[<bf000000>] (p54spi_op_tx+0x0/0x4c [p54spi]) >[<c01a4d34>] (p54_sta_unlock+0x0/0x78) p54spi_op_tx needs to be called from different locking contexts. Therefore we have to protect the linked list with irqsave spinlocks. Reported-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-16p54: replace MAC80211_LEDS with P54_LEDS in p54.hChristian Lamparter
I'm very sorry, as this change belongs to the other patch: "[PATCH] p54: fix SoftLED compile dependencies". however I must have somehow lost "git add" for that file. Signed-off-by: Christian Lamparter <chunkeey@web.de> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-13Replace all DMA_nBIT_MASK macro with DMA_BIT_MASK(n)Yang Hongyang
This is the second go through of the old DMA_nBIT_MASK macro,and there're not so many of them left,so I put them into one patch.I hope this is the last round. After this the definition of the old DMA_nBIT_MASK macro could be removed. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Greg KH <greg@kroah.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-27p54: Kconfig maintenanceChristian Lamparter
This patch updates p54's Kconfig entry and removes the out-dated device list. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27p54: fix SoftLED compile dependenciesChristian Lamparter
This patch fixes a compile problem when the MAC80211_LEDS triggers are enabled but not LED class itself. (which is sort of pointless, but anyway...) Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27wireless/p54: P54_SPI should depend on GENERIC_HARDIRQSGeert Uytterhoeven
m68k allmodconfig: | drivers/net/wireless/p54/p54spi.c: In function 'p54spi_probe': | drivers/net/wireless/p54/p54spi.c:675: error: implicit declaration of function | 'set_irq_type' | make[4]: *** [drivers/net/wireless/p54/p54spi.o] Error 1 Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16p54: completely ignore rx'd frames with bad FCSChristian Lamparter
Passing frames with a bad FCS to the user is an optional feature. However it doesn't work reliable and strangely not in the native monitor mode?! Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16p54: enable power save supportChristian Lamparter
This patch enables power save support on all p54 devices. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16p54: initial SoftLED supportChristian Lamparter
This patch adds SoftLED support for all p54 devices. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16p54: fix iwconfig txpower offChristian Lamparter
Disabling the receiver logic with P54_FILTER_TYPE_RX_DISABLED is not supported by all firmwares. However we have an alternative: hibernation. And the only side effect - so far - is a bit less power consumption. WIN! Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16p54pci: convert printk(KERN_* to dev_*Christian Lamparter
This patch replaces most printk(KERN_* "") with their by dev_* analogue. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16p54: unify ieee80211 device registrationChristian Lamparter
All three drivers (p54pci, p54usb and p54spi) are implementing the same functionality three times. So, why not put it into the shared library?! Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16p54usb: stop USB core interference in exit pathChristian Lamparter
The patch fixes a problem when the (Soft)LED stayed on after the module was unloaded. It turned out that the USB core disables all endpoints before calling the disconnect method. So it was impossible to switch off the radio & LEDs. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-10Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bnx2x_main.c drivers/net/wireless/iwlwifi/iwl3945-base.c drivers/net/wireless/rt2x00/rt73usb.c
2009-03-06p54: fix race condition in memory managementChristian Lamparter
This patch fixes a number of race conditions in the driver. Up until now, "entry" pointer was initialized before acquiring the right lock. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27p54: misplaced parenthesesRoel Kluin
Only FIF_FCSFAIL is set due to parentheses Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29wireless: restrict to 32 legacy ratesJohannes Berg
Since the standards only define 12 legacy rates, 32 is certainly a sane upper limit and we don't need to use u64 everywhere. Add sanity checking that no more than 32 rates are registered and change the variables to u32 throughout. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54spi: remove arch specific dependenciesChristian Lamparter
On Friday 16 January 2009 20:33:43 Kalle Valo wrote: > N800 and N810 support is not on mainline yet, for stlc45xx I decided > to add module parameters for the gpio numbers. Here's the commit from > stlc45xx repo: > > http://gitorious.org/projects/stlc45xx/repos/mainline/commits/35afc5df0027d02d49e6f5bf986dcc4deb4ee6cf This is the same patch for p54spi. It removes all N800/N810 specific code from p54spi, so the driver can be used on other architectures, or configurations as well. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54usb: fix conflict with recent usb changesChristian Lamparter
A recent change in the usb core "USB: change interface to usb_lock_device_for_reset()" conflicts with "p54usb: utilize usb_reset_device for 3887". Sadly, we have to call usb_reset_device before we can upload the firmware on 3887. Unless someone figures out how to reliably stop the 3887 so the hardware is still usable next time we want to start it. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54spi: p54spi driverChristian Lamparter
This patch adds the p54spi driver. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54spi: stlc45xx eeprom blobChristian Lamparter
Usually every prism54 design hardware has a tiny eeprom chip in which all device specific data for calibration and link-tuning is stored. The stlc45xx chips are the only exception. They are made for embedded devices, where space is scarce. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54: longbow frontend supportChristian Lamparter
This patch adds support for longbow RF chip. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54: prepare the eeprom parser routines for longbowChristian Lamparter
This patch adds support to upload pre-calculated calibration data to the firmware. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54: upgrade memrecord to p54_tx_infoChristian Lamparter
mac80211 reserves 24 bytes in skb->cb for the driver. So far, we only used them to keep track of used and free device memory. But p54spi will need a slice of it, as well as the stuck frame detection. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54: refactor p54_alloc_skbChristian Lamparter
Old firmwares had no problems processing frames which filled eighth of the memory window. However we have to be a bit more careful with fat frames when we talk to new firmwares. Apart from that, I confess the old logic was a bit weird and not very sophisticated. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54: return NETDEV_TX_OK in p54_tx and fix sparse warningsChristian Lamparter
This patch addresses all recent comments from Johannes Berg: 1st: (reference http://marc.info/?l=linux-wireless&m=123124685019631 ) >First off: all those should return NETDEV_TX_OK/BUSY. >iwl-agn: returns 0 (== NETDEV_TX_OK, but still should be changed) >[...] >p54: same (some paths) 2nd: > due to your PS patch ("p54: power save management"), please run sparse: > make C=2 CF=-D__CHECK_ENDIAN__ M=... > +drivers/net/wireless/p54/p54common.c:1753:8: warning: incorrect type in assignment (different base types) > +drivers/net/wireless/p54/p54common.c:1769:29: warning: incorrect type in assignment (different base types) The cpu_to_le16 ended up in the wrong line... Sorry! Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54: power save managementChristian Lamparter
This patch implements dynamic power save feature for p54. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54: implement FIF_OTHER_BSS filter settingChristian Lamparter
According to STMicroelectronics' LMAC documentation, the P54_FILTER_TYPE_TRANSPARENT flag "configures the receive frame filter to pass all frames without regard to type and address matching." Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54: enable rx/tx antenna diversity by eeprom bitsChristian Lamparter
Respect all documented bits in the eeprom about the device diversity features. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29mac80211: clean up set_key callbackJohannes Berg
The set_key callback now seems rather odd, passing a MAC address instead of a station struct, and a local address instead of a vif struct. Change that. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Bob Copeland <me@bobcopeland.com> [ath5k] Acked-by: Ivo van Doorn <ivdoorn@gmail.com> [rt2x00] Acked-by: Christian Lamparter <chunkeey@web.de> [p54] Tested-by: Kalle Valo <kalle.valo@nokia.com> [iwl3945] Tested-by: Samuel Ortiz <samuel@sortiz.org> [iwl3945] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54: regulatory domain hintsChristian Lamparter
This patch adds a sub-routine that parses the default country eeprom entry and forwards the obtained Alpha2 identifier to the regulatory sub-system. Note: I dropped the p54 specific regdomain<->alpha2 conversion code for now. But it will be added as soon as there's the common library function is ready. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54: prevent upload of wrong firmwaresChristian Lamparter
This patch will prevent anyone to upload a firmware which was not designed for his device. There's still a catch: There is no easy way to detect if a firmware is for PCI or for USB (1st Gen), because they all share the same LM86 identifier. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54usb: utilize usb_reset_device for 3887Christian Lamparter
Sometimes on unload or reboot the 3887 USB devices become stuck. <usual log entry> kernel: usbcore: registered new interface driver p54usb kernel: usb 2-10: (p54usb) reset failed! (-110) kernel: p54usb: probe of 2-10:1.0 failed with error -110 [...] and a physical unplug and replug was necessary. However we should be able to do this in software as well, without any user interaction. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54: enable proper frame injectionChristian Lamparter
This patch enables frame injection in monitor mode for all p54 devices. As a result, any user can finally use the aircrack-ng suite out of the box. e.g: aireplay-ng --test wlan0 Trying broadcast probe requests... Injection is working! Found 1 AP Trying directed probe requests... XX:XX:XX:XX:XX:XX - channel: i - 'SSID' Ping (min/avg/max): 1.536ms/3.193ms/4.377ms Power: 193.00 30/30: 100% Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54: label queues with their corresponding namesChristian Lamparter
This patch introduce new shiny named labels for our 8 (4 - on old firmware) queues. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-28 04:56:23 +0000