aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/rt2x00/rt2x00queue.h
AgeCommit message (Collapse)Author
2008-03-25rt2x00: Add dev_flags to rx descriptorIvo van Doorn
The rxdone_entry_desc structure contains 3 fields which are always 1 or 0. We can safe 8 bytes by replacing them with a single dev_flags fields which contain the flags for those settings. Additionally we can remove the OFDM flag since it is no longer used since the introduction of the SIGNAL_PLCP flag. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13rt2x00: Fix rt2400pci signalIvo van Doorn
After sampling hundreds of RX frame descriptors, the results were conclusive: - The Ralink documentation regarding the SIGNAL and RSSI are wrong. It turns out that of the 5 BBR registers, we should not use BBR0 and BBR1 for SIGNAL and RSSI respectively, but actually BBR1 and BBR2. BBR0 does show values, but the exact meaning remains unclear, but they cannot be translated into a SIGNAL or RSSI field. BBR3, BBR4 and BBR5 are always 0, so their meaning is unknown. As it turns out, the reported SIGNAL is the PLCP value, this in contradiction to what was expected looking at rt2500pci which only reported the PLCP values for OFDM rates and bitrate values for CCK rates. This means we should let the driver raise the flag about the contents of the SIGNAL field so rt2x00lib can always do the right thing based on what the driver reports. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29rt2x00: Don't report driver generated frames to tx_status()Ivo van Doorn
This adds a new flag for the skb_frame_desc structure which is used to tag rts/cts frames that are generated by the driver. Through the tag we can recognize frames we have generated ourselves, so we don't report their tx status to mac80211. This patch is based on the original patch by Mattias Nissler <mattias.nissler@gmx.de>. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29rt2x00: Move beacon and atim queue defines into rt2x00Ivo van Doorn
As Johannes Berg indicated the BEACON and AFTER_BEACON queue indeces in mac80211 should be removed because they are too hardware specific. This patch adds the queue index defines into rt2x00queue.h and removes the dependency of the defines inside mac80211.h. Also move rt2x00pci_beacon_update() into rt2400pci and rt2500pci individually since it is no longer a generic function since rt61 and rt2800 no longer use that. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29rt2x00: Add per-interface structureIvo van Doorn
Rework the interface handling. Delete the interface structure and replace it with a per-interface structure. This changes the way rt2x00 handles the active interface drastically. Copy ieee80211_bss_conf to the this rt2x00_intf structure during the bss_info_changed() callback function. This will allow us to reference it later, and removes the requirement for the device flag SHORT_PREAMBLE flag which is interface specific. Drivers receive the option to give the maximum number of virtual interfaces the device can handle. Virtual interface support: rt2400pci: 1 sta or 1 ap, * monitor interfaces rt2500pci: 1 sta or 1 ap, * monitor interfaces rt2500usb: 1 sta or 1 ap, * monitor interfaces rt61pci: 1 sta or 4 ap, * monitor interfaces rt73usb: 1 sta or 4 ap, * monitor interfaces At the moment none of the drivers support AP and STA interfaces simultaneously, this is a hardware limitation so future support will be very unlikely. Each interface structure receives its dedicated beacon entry, with this we can easily work with beaconing while multiple master mode interfaces are currently active. The configuration handlers for the MAC, BSSID and type are often called together since they all belong to the interface configuration. Merge the 3 configuration calls and cleanup the API between rt2x00lib and the drivers. While we are cleaning up the interface configuration anyway, we might as well clean up the configuration handler as well. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29rt2x00: Queue handling overhaulIvo van Doorn
This introduces a big queue handling overhaul, this also renames "ring" to "queues". Move queue handling into rt2x00queue.c and the matching header, use Kerneldoc to improve rt2x00 library documentation. Access to the queues is now protected under a spinlock, this to prevent race conditions which could corrupt the indexing system of the queue. Each queue entry allocates x bytes for driver/device specific data, this cleans up the queue structure significantly and improves code readability. rt2500usb no longer needs 2 entries in the beacon queue to correctly send out the guardian byte. This is now handled in the entry specific structure. rt61 and rt73 now use the correct descriptor size for beacon frames, since this data is written into the registers not the entire TXD descriptor was used but instead of a subset of it named TXINFO. Finally this also fixes numerous other bugs related to incorrect beacon handling or beacon related code. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>