aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/zd1211rw
AgeCommit message (Collapse)Author
2009-01-22zd1211rw: adding Sitecom WL-603 (0df6:0036) to the USB id listHin-Tak Leung
Giuseppe Cala <jiveaxe@gmail.com> (The second "a" in "Cala" should be a grave, U+00E0) reported success on zd1211-devs@lists.sourceforge.net. The chip info is: zd1211b chip 0df6:0036 v4810 high 00-0c-f6 AL2230_RF pa0 g--N- The Sitecom WL-603 is detected as a zd1211b with a AL2230 RF transceiver chip. Signed-off-by: Giuseppe Cala <jiveaxe@gmail.com> Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-08fix similar typos to successfullColy Li
When I review ocfs2 code, find there are 2 typos to "successfull". After doing grep "successfull " in kernel tree, 22 typos found totally -- great minds always think alike :) This patch fixes all the similar typos. Thanks for Randy's ack and comments. Signed-off-by: Coly Li <coyli@suse.de> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Roland Dreier <rolandd@cisco.com> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Vlad Yasevich <vladislav.yasevich@hp.com> Cc: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-29drivers/net/usb: use USB API functions rather than constantsJulia Lawall
This set of patches introduces calls to the following set of functions: usb_endpoint_dir_in(epd) usb_endpoint_dir_out(epd) usb_endpoint_is_bulk_in(epd) usb_endpoint_is_bulk_out(epd) usb_endpoint_is_int_in(epd) usb_endpoint_is_int_out(epd) usb_endpoint_num(epd) usb_endpoint_type(epd) usb_endpoint_xfer_bulk(epd) usb_endpoint_xfer_control(epd) usb_endpoint_xfer_int(epd) usb_endpoint_xfer_isoc(epd) In some cases, introducing one of these functions is not possible, and it just replaces an explicit integer value by one of the following constants: USB_ENDPOINT_XFER_BULK USB_ENDPOINT_XFER_CONTROL USB_ENDPOINT_XFER_INT USB_ENDPOINT_XFER_ISOC In drivers/net/wireless/zd1211rw/zd_usb.c the code: (endpoint->bEndpointAddress & USB_TYPE_MASK) == USB_DIR_OUT is suspicious. If it is intended to use USB_ENDPOINT_DIR_MASK rather than USB_TYPE_MASK, then the whole conditional test could be converted to a call to usb_endpoint_is_bulk_in. An extract of the semantic patch that makes these changes is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r1@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) == - \(USB_ENDPOINT_XFER_CONTROL\|0\)) + usb_endpoint_xfer_control(epd) @r5@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) == - \(USB_DIR_IN\|0x80\)) + usb_endpoint_dir_in(epd) @inc@ @@ #include <linux/usb.h> @depends on !inc && (r1||r5)@ @@ + #include <linux/usb.h> #include <linux/usb/...> // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-05Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-core.c drivers/net/wireless/iwlwifi/iwl-sta.c
2008-12-05zd1211rw: use unaligned safe memcmp() in-place of compare_ether_addr()Shaddy Baddah
Under my 2.6.28-rc6 sparc64, when associating to an AP through my zd1211rw device, I was seeing kernel log messages like (not exact output): Kernel unaligned access at TPC[10129b68] zd_mac_rx+0x144/0x32c [zd1211rw] For the zd1211rw module, on RX, the 80211 packet will be located after the PLCP header in the skb data buffer. The PLCP header being 5 bytes long, the 80211 header will start unaligned from an aligned skb buffer. As per Documentation/unaligned-memory-access.txt, we must replace the not unaligned() safe compare_ether_addr() with memcmp() to protect architectures that require alignment. Signed-off-by: Shaddy Baddah <shaddy_baddah@hotmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-06Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/ath5k/base.c net/8021q/vlan_core.c
2008-11-06zd1211rw: Add 2 device IDsDaniel Drake
07fa/1196 Bewan BWIFI-USB54AR: Tested by night1308, this device is a ZD1211B with an AL2230S radio. 0ace/b215 HP 802.11abg: Tested by Robert Philippe Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: remove struct regdom hintingJohannes Berg
The code needs to be split out and cleaned up, so as a first step remove the capability, to add it back in a subsequent patch as a separate function. Also remove the publically facing return value of the function and the wiphy argument. A number of internal functions go from being generic helpers to just being used for alpha2 setting. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211/drivers: rewrite the rate control APIJohannes Berg
So after the previous changes we were still unhappy with how convoluted the API is and decided to make things simpler for everybody. This completely changes the rate control API, now taking into account 802.11n with MCS rates and more control, most drivers don't support that though. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: introduce hw config change flagsJohannes Berg
This makes mac80211 notify the driver which configuration actually changed, e.g. channel etc. No driver changes, this is just plumbing, driver authors are expected to act on this if they want to. Also remove the HW CONFIG debug printk, it's incorrect, often we configure something else. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-27net: convert print_mac to %pMJohannes Berg
This converts pretty much everything to print_mac. There were a few things that had conflicts which I have just dropped for now, no harm done. I've built an allyesconfig with this and looked at the files that weren't built very carefully, but it's a huge patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-01Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/ath9k/core.c drivers/net/wireless/ath9k/main.c net/core/dev.c
2008-09-23zd1211: Use skb_queue_walk() instead of by-hand implementation.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22wireless: zd1211rw: add device ID fix wifi dongle "trust nw-3100"born.into.silence@gmail.com
akpm: taken from http://bugzilla.kernel.org/show_bug.cgi?id=11587 I bought the wifi dongle trust nw-3100 wich is in fact a zd1211rw. Its hardware id was missing in the sources, adding it made it work flawlessly. Cc: Daniel Drake <dsd@gentoo.org> Cc: Ulrich Kunitz <kune@deine-taler.de> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-15mac80211: use nl80211 interface typesJohannes Berg
There's really no reason for mac80211 to be using its own interface type defines. Use the nl80211 types and simplify the configuration code a bit: there's no need to translate them any more now. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-15zd1211rw: make use of new regulatory_hint()Luis R. Rodriguez
This cleans up zd1211rw's own regulatory work, and makes use of the new cfg80211 regulatory_hint(). Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05cfg80211: keep track of supported interface modesLuis R. Rodriguez
It is obviously good for userspace to know up front which interface modes a given piece of hardware might support (even if adding such an interface might fail later because of concurrency issues), so let's make cfg80211 aware of that. For good measure, disallow adding interfaces in all other modes so drivers don't forget to announce support for one mode when they add it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Stephen Blackheath <tramp.enshrine.stephen@blacksapphire.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29mac80211: remove IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE flagJohannes Berg
I forgot this in the previous patch that made it unused. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2008-07-14Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/netfilter/nf_conntrack_proto_tcp.c
2008-07-14mac80211: revamp beacon configurationJohannes Berg
This patch changes mac80211's beacon configuration handling to never pass skbs to the driver directly but rather always require the driver to use ieee80211_beacon_get(). Additionally, it introduces "change flags" on the config_interface() call to enable drivers to figure out what is changing. Finally, it removes the beacon_update() driver callback in favour of having IBSS beacon delivered by ieee80211_beacon_get() as well. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-09zd1211rw: stop beacons on remove_interfaceLuis Carlos Cobo
If a mesh or ad-hoc interface is brought up and later it is replaced by managed interface, the managed interface will keep transmitting the beacons that were configured for the former interface. This patch fixes that behaviour. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-3945.c net/mac80211/mlme.c
2008-07-08zd1211rw: beacon config error checkingDaniel Drake
Add some error checking to the new beacon configuration code. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-07zd1211rw: add ID for AirTies WUS-201Firat Birlik
I would like to inform you of our zd1211 based usb wifi adapter (AirTies WUS-201), which works with the zd1211rw driver with the following device id definition. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-26zd1211rw: use frame control helpersHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-10Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/tg3.c drivers/net/wireless/rt2x00/rt2x00dev.c net/mac80211/ieee80211_i.h
2008-06-10Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-next-2.6 Conflicts: drivers/net/ps3_gelic_wireless.c drivers/net/wireless/libertas/main.c
2008-06-09zd1211rw: Fix data padding for QoSMichael Buesch
This patch fixes a data alignment issue in the zd1211rw driver. The IEEE80211_STYPE_QOS_DATA bit should be used as a bitwise test to test for the presence of the 2 byte QoS control field. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-22misc drivers/net endianness noiseAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-21zd1211rw: Use DMA-aware buffer for usb transferAtsushi Nemoto
The zd1211rw driver uses unaligned stack buffer for USB control message. But it might cause stack corruption on non-coherent platform, such as MIPS. Use DMA-aware buffers for USB transfer. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21mac80211: move TX info into skb->cbJohannes Berg
This patch converts mac80211 and all drivers to have transmit information and status in skb->cb rather than allocating extra memory for it and copying all the data around. To make it fit, a union is used where only data that is necessary for all steps is kept outside of the union. A number of fixes were done by Ivo, as well as the rt2x00 part of this patch. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21mac80211: use rate index in TX controlJohannes Berg
This patch modifies struct ieee80211_tx_control to give band info and the rate index (instead of rate pointers) to drivers. This mostly serves to reduce the TX control structure size to make it fit into skb->cb so that the fragmentation code can put it there and we can think about passing it to drivers that way in the future. The rt2x00 driver update was done by Ivo, thanks. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21misc drivers/net endianness noiseAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-15Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2008-05-14mac80211: use hardware flags for signal/noise unitsBruno Randolf
trying to clean up the signal/noise code. the previous code in mac80211 had confusing names for the related variables, did not have much definition of what units of signal and noise were provided and used implicit mechanisms from the wireless extensions. this patch introduces hardware capability flags to let the hardware specify clearly if it can provide signal and noise level values and which units it can provide. this also anticipates possible new units like RCPI in the future. for signal: IEEE80211_HW_SIGNAL_UNSPEC - unspecified, unknown, hw specific IEEE80211_HW_SIGNAL_DB - dB difference to unspecified reference point IEEE80211_HW_SIGNAL_DBM - dBm, difference to 1mW for noise we currently only have dBm: IEEE80211_HW_NOISE_DBM - dBm, difference to 1mW if IEEE80211_HW_SIGNAL_UNSPEC or IEEE80211_HW_SIGNAL_DB is used the driver has to provide the maximum value (max_signal) it reports in order for applications to make sense of the signal values. i tried my best to find out for each driver what it can provide and update it but i'm not sure (?) for some of them and used the more conservative guess in doubt. this can be fixed easily after this patch has been merged by changing the hardware flags of the driver. DRIVER SIGNAL MAX NOISE QUAL ----------------------------------------------------------------- adm8211 unspec(?) 100 n/a missing at76_usb unspec(?) (?) unused missing ath5k dBm dBm percent rssi b43legacy dBm dBm percent jssi(?) b43 dBm dBm percent jssi(?) iwl-3945 dBm dBm percent snr+more iwl-4965 dBm dBm percent snr+more p54 unspec 127 n/a missing rt2x00 dBm n/a percent rssi+tx/rx frame success rt2400 dBm n/a rt2500pci dBm n/a rt2500usb dBm n/a rt61pci dBm n/a rt73usb dBm n/a rtl8180 unspec(?) 65 n/a (?) rtl8187 unspec(?) 65 (?) noise(?) zd1211 dB(?) 100 n/a percent drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-14zd1211rw: initial IBSS supportBruno Randolf
this adds initial IBSS support for the zydas zd1211rw: convince driver that it can do IBSS mode. add mac80211 beacon_update callback. IBSS merge and TSF updates don't work yet, but it makes the driver usable in ad-hoc networks. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-12zd1211rw: fix potential use-after-free bugJohannes Berg
zd_mac_tx_to_dev() could potentially free the skb, or hand it off to mac80211 which might free it. Hence, this code needs to get the usb pointer out of skb->cb before handing it off to that function. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-29wireless: use get/put_unaligned_* helpersHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: Michael Buesch <mb@bu3sch.de> Cc: Daniel Drake <dsd@gentoo.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-06zd1211rw: support for mesh interface and beaconingLuis Carlos Cobo
The previously unused CR_CAM_MODE register is set to MODE_AP_WDS. This makes the driver ack mesh (WDS) frames. It does not affect Infra functionality of the driver. Previously missing beaconing support has been added. This might also help implement a currently missing ah-hoc mode. Support for interrupts from the device have been added, but we are not handling most of them. Mesh interfaces are considered associated as long as the interface is up. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29zd1211rw: Fix beacon filter flags thinkoMichael Buesch
We must not clear the FIF_BCN_PRBRESP_PROMISC bit in the new_flags. The zd-driver does support sending beacons and probe responses to the host. What the flag does is say "Send me all beacons and probe responses". And we actually do that. We always do that, so we ignore the case when the bit is disabled. But that is fine. But we must not clear the flag, as that tells mac80211 that we do not support passing beacons and probe responses to the stack. And that's not true. Signed-off-by: Michael Buesch <mb@bu3sch.de> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29zd1211rw: Fixed incorrect constant name.Javier Cardona
Trial and error reveals that CR_ZD1211B_TX_PWR_CTL* do not affect the transmission power. Instead these registers seem to control the contention windows limits for different QoS access categories. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29cfg80211 API for channels/bitrates, mac80211 and driver conversionJohannes Berg
This patch creates new cfg80211 wiphy API for channel and bitrate registration and converts mac80211 and drivers to the new API. The old mac80211 API is completely ripped out. All drivers (except ath5k) are updated to the new API, in many cases I expect that optimisations can be done. Along with the regulatory code I've also ripped out the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be unnecessary if the hardware simply gives us whatever channels it wants to support and we then enable/disable them as required, which is pretty much required for travelling. Additionally, the patch adds proper "basic" rate handling for STA mode interface, AP mode interface will have to have new API added to allow userspace to set the basic rate set, currently it'll be empty... However, the basic rate handling will need to be moved to the BSS conf stuff. I do expect there to be bugs in this, especially wrt. transmit power handling where I'm basically clueless about how it should work. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-20zd1211rw: fix sparse warningsJohannes Berg
This silences sparse when run on zd1211rw. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28mac80211: add unified BSS configurationJohannes Berg
This patch (based on Ron Rindjunsky's) creates a framework for a unified way to pass BSS configuration to drivers that require the information, e.g. for implementing power save mode. This patch introduces new ieee80211_bss_conf structure that is passed to the driver via the new bss_info_changed() callback when the BSS configuration changes. This new BSS configuration infrastructure adds the following new features: * drivers are notified of their association AID * drivers are notified of association status and replaces the erp_ie_changed() callback. The patch also does the relevant driver updates for the latter change. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28mac80211: dont use interface indices in driversJohannes Berg
This patch gets rid of the if_id stuff where possible in favour of a new per-virtual-interface structure "struct ieee80211_vif". This structure is located at the end of the per-interface structure and contains a variable length driver-use data area. This has two advantages: * removes the need to look up interfaces by if_id, this is better for working with network namespaces and performance * allows drivers to store and retrieve per-interface data without having to allocate own lists/hash tables Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28zd1211rw: fix alignment for QOS and WDS framesMichael Buesch
This patch fixes RX packet alignment issues in the zd1211rw driver. This is based on a patch by Johannes Berg. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28zd1211rw: add copyright noticesDaniel Drake
Requested by Michael Wu. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28zd1211rw: Add ID for Trendnet TEW-429UB ADaniel Drake
Tested by chloubs on IRC zd1211 chip 157e:300a v4810 high 00-11-e0 AL7230B_RF pa0 g---- Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28zd1211rw: port to mac80211Daniel Drake
This seems to be working smoothly now. Let's not hold back the mac80211 transition any further. This patch ports the existing driver from softmac to mac80211. Many thanks to everyone who helped out with the porting efforts. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 14:07:13 +0000