aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2008-12-05ath9k: Use cleaner debug masksSujith
Remove all the useless __func__ prefixes in debug messages, and replace the DPRINTF macro with a function. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05rtl8187: fix retry count passed in rtl8187_txherton
I mistakenly changed retry count passed in rtl8187_tx in previous change "rtl8187: feedback transmitted packets using tx close descriptor for 8187B". For 8187 it should represent the number of retries (retry count limit). As explained by Johannes Berg, .count represents the number of tries (not retries), and retries = tries - 1. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Tested-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05wireless: clean up radiotap a bitJohannes Berg
No need to pad the header so no constant needed for that, no need to carry any version number from netbsd nor CVS IDs from them. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath9k: Handle channel initialization for AP modeSujith
Hostapd now passes the HT parameters through the config() callback, use these to set the appropriate channel in AP mode. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath5k: enable combined michael mic in key cacheBob Copeland
For mac revisions >= "Griffin," the hardware allows the mic tx and rx authenticator keys to share the same cache line, whereas earlier hardware can only store the rx. Enable the combined mic on hardware that supports it. Changes to ath5k.h Changes-licensed-under: 3-Clause-BSD Changes to attach.c, pcu.c, reg.h Changes-licensed-under: ISC Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath5k: clean up ath5k_hw_set_keyBob Copeland
Status: O With the addition of TKIP (and soon CCMP), key->alg is a more useful guide to key type than the key length. This patch cleans up key type assignment in ath5k_hw_set_key by extracting it into its own function. It also replaces the separate memcpy() calls for extracting key material into the hardware format with a loop that works regardless of key size. Finally, the patch removes support for WEP-128 since it is a non-standard key length that mac80211 also doesn't use. Changes-licensed-under: ISC Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath5k: preserve higher order bits when setting mac addressBob Copeland
In some cases we would like to set the mac address without changing the operating mode. However, Atheros cards store PCU data in the high 16 bits of the mac address register. Change ath5k_hw_set_lladdr() to not clobber the PCU settings. Changes-licensed-under: ISC Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05iwlwifi: remove uses of __constant_{endian} helpersHarvey Harrison
The base versions handle constant folding just fine. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05iwlwifi: properly initialize calibration command headerTomas Winkler
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05hostap: select required crypto bits in KconfigJohn W. Linville
This is fallout from moving the crypto stuff to the new lib80211 component. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-03if_usb: Kill directly reference of netdev->privWang Chen
Simply replace netdev->priv with netdev_priv(). Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-26Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/hp-plus.c drivers/net/wireless/ath5k/base.c drivers/net/wireless/ath9k/recv.c net/wireless/reg.c
2008-11-26mac80211_hwsim: fix-up some print_mac merge damageJohn W. Linville
Some print_mac -> %pM conversions got lost in some merge or another... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26p54: fix wmm queue settingsChristian Lamparter
This patch fixes a regression (introduced by "p54: more definitions form lmac_longbow.h and pda.h") It turned out that the "ret" variable wasn't initialized and this caused the following warnings/errors to appear: wmaster1: failed to set TX queue parameters for queue 2 wmaster1: failed to set TX queue parameters for queue 3 wmaster1: failed to set TX queue parameters for queue 1 wmaster1: failed to set TX queue parameters for queue 0 Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Use proper TX channel width for setting channelsSujith
The TX channel width of the BSS can be obtained only after association. In all cases, default to HT20 if HT is enabled, and set chan width to HT40 only if the BSS supports it. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Code scrubSujith
Merge core.c and base.c Remove Antenna Diversity (unused now). Remove unused chainmask handling code. Comment, indentation scrub. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26orinoco: Provide option to avoid unnecessary fw cachingDavid Kilroy
Make firmware caching on startup optional, and make it default. When the option is not selected and PM_SLEEP is configured, then cache firmware in the suspend pm_notifier. This configuration saves about 64k RAM in normal use, but can lead to a situation where the driver is configured to use a different firmware. Signed-off by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26orinoco: Resume spectrum_cs in the same way as orinoco_csDavid Kilroy
Retrieval of external firmware has been resolved, and should work with the standard orinoco resume algorithm. This fixes an issue where priv->hw_unavailable indicates the card is ready when firmware has not been loaded. Signed-off by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26orinoco: Cache Symbol firmwareDavid Kilroy
Signed-off by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26orinoco: Separate fw caching from downloadDavid Kilroy
This refactorring will make it easier to share logic with Symbol firmware. Signed-off by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Handle -ENOMEM on RX gracefullyLuis R. Rodriguez
We would get an oops on RX on -ENOMEM by passing NULL to the hardware on ath_rx_buf_link(). The oops would look something like this: ath_rx_tasklet+0x515/0x53b ath9k_tasklet+0x48 tasklet_action __do_softirq irq_exit do_IRQ RIP: ath_rx_buf_link+0x3a We correct this by handling the requeue directly on the ath_rx_tasklet() and trying to allocate an skb *prior* to sending up the last hardware processed skb. If we run out of memory this gauranteees we have skbs to work with while it simply drops new received frames. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath5k: Clean up eeprom parsing and add missing calibration dataFelix Fietkau
This patch brings the ath5k eeprom parsing code in sync with the work done on ath_info by Nick Kossifidis and integrates the missing parts based on the code of the Atheros Legacy HAL release. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Dont update rate control for every AMPDUVasanthakumar Thiagarajan
Update the rate control only with the tx status of first AMPDU of an aggregation. This patch fixes frequent drops in throughput. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26iwlwifi: TX update chicken bitsWinkler, Tomas
This instructs FH to increment the retry count of a packet when it is brought from the memory to TX-FIFO to save transactions during aggregation flow. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26iwlwifi: TX setup fix confusion between TX queue and TX DMA channelWinkler, Tomas
This patch configures correctly TX DMA channel. It is not the same as TX queue. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26iwlwifi: 4965 define firmware file name onceWinkler, Tomas
Apply same idiom as in 5000 introduced by 'iwlwifi: define firmware file name once' Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26iwlwifi: enable base band calibration in 5000 HWTomas Winkler
This patch adds base band calibration support. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26iwlwifi: move iwl_clear_stations_table to iwl-sta.cWinkler, Tomas
This patch moves iwl_clear_stations_table into iwl-sta.c Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26iwl3945 : Fix ad-hoc mode for 3945Abhijeet Kolekar
Patch fixes the ad-hoc mode by 1) Removing redundant clear_stations_table which prevented generation of beacons. 2) Setting assoc_id to 1. It was never set so preventing tx flow in iwl3945_tx_skb. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath5k: set mac address in add_interfaceBob Copeland
Configure the mac address in add_interface and clear it in remove_interface so that users can change the mac address to something other than the one in the eeprom. Also avoid setting it at attach time so that we won't ack packets until fully set up. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Use straightforward PCI routines to setup the TX buffer.Sujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Update TX trigger level on a FIFO underrun.Sujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Fix bug in deciphering channel flagsSujith
CHANNEL_CCK flag is set for all 2 Ghz channels, so IS_CHAN_CCK() would turn out to be true for all channles in that band. Use IS_CHAN_B() now, which checks the channel mode and not the channel flags. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Move TX completion routine to xmit.cSujith
Also, use a helper function to setup RC status data when processing completed TX descriptors. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Use helpersSujith
Break down huge functions, use helper functions or macros instead. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: General code scrubSujith
Replace TRUE/FALSE macros with VALID/INVALID macros. Follow a consistent variable convention. Remove unnecessary comments. Add all RC phy macros into a single enum. Merge functions into reasonably sized entities. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Remove ath9k_rate_tableSujith
Maintaining two sets of rate tables is redundant, remove one and use struct ath_rate_table exclusively. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Use rate_driver_dataSujith
Remove the hack using vif, and use rate_driver_data within skb->cb to hold driver specific rate information. Setup the rate series in the skb's tx control area and remove all references to ath9k specific rate series ( using struct ath_rc_series ). Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Remove ath_rate_softcSujith
Move the hw rate tables to ath_softc, and access them directly. tx_triglevel_max is global, move it to ath_rate_node. Now that ath_rate_softc is gone, rate control attach becomes simpler. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Remove rate control reference in VAPSujith
Rate control init is now confined to itself, using the HT capabilites of the STA from rate_init(). Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: We don't support non-HT devices, so remove superfluous code.Sujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Revamp RX handlingSujith
Remove a lot of old, crufty code and make RX status reporting a bit sane and clean. Do not do anything to the RX skb before unmapping. So in ath_rx_tasklet(), move the skb_put() after PCI unmap. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Nuke fixed rate handling in driverSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Remove half/quarter rate tablesSujith
Half/Quarter rate tables are needed only for legacy chipsets. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Remove ath_rate_newassoc()Sujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Remove ath_setup_ratesSujith
Setup legacy rates in ath_rate_init() itself. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Simplify RC alloc/free functionsSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Merge struct ath_tx_ratectrl with ath_rate_nodeSujith
Avoid casting of ath_tx_ratctrl and access the elements directly. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Fix panic while unregistering rfkillVasanthakumar Thiagarajan
[ 6133.670329] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 [ 6133.672802] IP: [<ffffffffa030fcf6>] ieee80211_stop_queues+0x26/0x40 [mac80211] [ 6133.672802] PGD 759dc067 PUD 74f1d067 PMD 0 [ 6133.672802] Oops: 0002 [#1] PREEMPT SMP [ 6133.672802] last sysfs file: /sys/class/backlight/acpi_video0/brightness [ 6133.672802] CPU 0 [ 6133.672802] Modules linked in: ath9k(-) mac80211 pciehp pci_hotplug arc4 ecb joydev pcmcia ppdev lp ppp_generic psmouse sg pcspkr s] [ 6133.735830] Pid: 4445, comm: rmmod Tainted: G W 2.6.28-rc5-wl #1 [ 6133.735830] RIP: 0010:[<ffffffffa030fcf6>] [<ffffffffa030fcf6>] ieee80211_stop_queues+0x26/0x40 [mac80211] [ 6133.735830] RSP: 0018:ffff88007d1efd10 EFLAGS: 00010246 [ 6133.735830] RAX: 0000000000000000 RBX: ffff880074f41aa0 RCX: 0000000000000000 [ 6133.735830] RDX: 0000000000000010 RSI: 0000000000000000 RDI: ffff880074f40340 [ 6133.735830] RBP: ffff880074990000 R08: 0000000000000000 R09: 000000000000224d [ 6133.735830] R10: 0000000000000000 R11: ffffffff8031dc70 R12: 0000000000000000 [ 6133.735830] R13: 0000000000000001 R14: ffff880074f46c9c R15: 0000000000000000 [ 6133.735830] FS: 00007f1e2e0bc6f0(0000) GS:ffffffff805e0b80(0000) knlGS:0000000000000000 [ 6133.735830] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 6133.735830] CR2: 0000000000000010 CR3: 0000000075593000 CR4: 00000000000006e0 [ 6133.735830] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 6133.735830] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 6133.735830] Process rmmod (pid: 4445, threadinfo ffff88007d1ee000, task ffff88007c0c8000) [ 6133.735830] Stack: [ 6133.735830] ffffffffa034d583 ffff88007c7d9410 ffff88007c7d9410 ffff88007c7d9410 [ 6133.735830] ffffffff80481dab ffff880074f41aa0 00000000fffffff0 0000000000000000 [ 6133.735830] 0000000000000001 0000000000000001 ffffffffa034d8a5 ffff88007c7d9400 [ 6133.735830] Call Trace: [ 6133.735830] [<ffffffffa034d583>] ? ath_radio_disable+0x33/0x150 [ath9k] [ 6133.735830] [<ffffffff80481dab>] ? __mutex_lock_slowpath+0x20b/0x2a0 [ 6133.735830] [<ffffffffa034d8a5>] ? ath_sw_toggle_radio+0x65/0xa0 [ath9k] [ 6133.735830] [<ffffffffa019d1f4>] ? rfkill_toggle_radio+0x74/0x140 [rfkill] [ 6133.735830] [<ffffffffa019d597>] ? rfkill_remove_switch+0x67/0x80 [rfkill] [ 6133.735830] [<ffffffffa019d955>] ? rfkill_unregister+0x25/0x50 [rfkill] [ 6133.735830] [<ffffffffa034bf75>] ? ath_detach+0xf5/0x140 [ath9k] [ 6133.735830] [<ffffffffa034bfe9>] ? ath_pci_remove+0x29/0x80 [ath9k] [ 6133.735830] [<ffffffff8035263c>] ? pci_device_remove+0x2c/0x60 [ 6133.735830] [<ffffffff803c3829>] ? __device_release_driver+0x99/0x100 [ 6133.735830] [<ffffffff803c3950>] ? driver_detach+0xc0/0xd0 [ 6133.735830] [<ffffffff803c296e>] ? bus_remove_driver+0x8e/0xd0 [ 6133.735830] [<ffffffff80352916>] ? pci_unregister_driver+0x36/0xa0 [ 6133.735830] [<ffffffffa0356ad4>] ? exit_ath_pci+0x10/0x29 [ath9k] [ 6133.735830] [<ffffffff8026bb1b>] ? sys_delete_module+0x1cb/0x2d0 [ 6133.735830] [<ffffffff802960d9>] ? do_munmap+0x349/0x390 [ 6133.735830] [<ffffffff80342d01>] ? __up_write+0x21/0x150 [ 6133.735830] [<ffffffff8020c45b>] ? system_call_fastpath+0x16/0x1b [ 6133.735830] Code: c3 0f 1f 40 00 0f b7 57 5e 0f b7 47 5c 01 c2 74 30 31 c9 66 90 48 8b 57 78 0f b7 c1 48 c1 e0 07 48 03 82 00 03 00 [ 6133.735830] RIP [<ffffffffa030fcf6>] ieee80211_stop_queues+0x26/0x40 [mac80211] Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26rtl8187: Fix transmission count sent to mac80211Larry Finger
In the commit entitled "mac80211/drivers: rewrite the rate control API", the meaning of the packet transmit count was changed from the number of retries to the total number. In driver rtl8187, this change was missed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Tested-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 11:09:12 +0000