aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2009-02-27b43: Remove bogus integer truncation warningsMichael Buesch
"warning: large integer implicitly truncated to unsigned type" Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: fix 802.11g conformance test limit typoBob Copeland
802.11g is in 2 ghz band, not 5 ghz. Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27orinoco: prevent accessing memory outside the firmware imageDavid Kilroy
Do this by indicating the end of the appropriate regions of memory. Note that MAX_PDA_SIZE should only apply to the PDA block read from flash/EEPROM, and has been erronously applied to the pdr elements. Remove the macro, and use the actual PDA size passed down by the caller. We also fix up some of the types used, marking as much as possible const, and using void* for the end pointers. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27orinoco: validate firmware headerDavid Kilroy
Check the Agere firmware headers for validity before attempting to download it. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27at76c50x-usb: add link to the TODO listKalle Valo
It's easier to have the TODO list in wiki, so add a link to the list. Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27at76c50x-usb: additional disconnect fixesJason Andryuk
Additional attempts to fix Oops on disconnect, that appear to be successful. However, some may be extraneous. The cancel_delayed_work call is probably the most necessary. The device_unplugged check may not be necessary. del_timer_sync may not be necessary either, but the Oops I was receiving was related to timers. Hence the addition. Signed-off-by: Jason Andryuk <jandryuk@gmail.com> Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27at76c50x-usb: clean up DMA on stackJason Andryuk
Cleanup dma on stack issues: - no DMA on stack - cleanup unclear endianness issue Corrected version of Oliver Neukum's original patch for at76_usb. Signed-off-by: Jason Andryuk <jandryuk@gmail.com> Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27at76c50x-usb: fix oops on disconnectJason Andryuk
flush_workqueue needs to be called instead of the generic one and the associated functions need to be modified to prevent re-adding themselves to the workqueue. The rx_tasklet is also killed in the small (?) chance it is scheduled. Signed-off-by: Jason Andryuk <jandryuk@gmail.com> Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: follow beacon hints on reg_notifier when world roamingLuis R. Rodriguez
If we are roaming we allow to follow beacon hints. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27cfg80211: move all regulatory hints to workqueueLuis R. Rodriguez
All regulatory hints (core, driver, userspace and 11d) are now processed in a workqueue. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27b43: Convert usage of b43_radio_maskset()Michael Buesch
This patch converts code to use the new b43_radio_maskset() API. The semantic patch that makes this change is as follows: // <smpl> @@ expression dev, addr, mask, set; @@ -b43_radio_write16(dev, addr, (b43_radio_read16(dev, addr) & mask) | set); +b43_radio_maskset(dev, addr, mask, set); // </smpl> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27b43: Convert usage of b43_radio_mask()Michael Buesch
This patch converts code to use the new b43_radio_mask() API. The semantic patch that makes this change is as follows: // <smpl> @@ expression dev, addr, mask; @@ -b43_radio_write16(dev, addr, b43_radio_read16(dev, addr) & mask); +b43_radio_mask(dev, addr, mask); // </smpl> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27b43: Convert usage of b43_radio_set()Michael Buesch
This patch converts code to use the new b43_radio_set() API. The semantic patch that makes this change is as follows: // <smpl> @@ expression dev, addr, set; @@ -b43_radio_write16(dev, addr, b43_radio_read16(dev, addr) | set); +b43_radio_set(dev, addr, set); // </smpl> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27b43: Convert usage of b43_phy_maskset()Michael Buesch
This patch converts code to use the new b43_phy_maskset() API. The semantic patch that makes this change is as follows: // <smpl> @@ expression dev, addr, mask, set; @@ -b43_phy_write(dev, addr, (b43_phy_read(dev, addr) & mask) | set); +b43_phy_maskset(dev, addr, mask, set); // </smpl> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27b43: Convert usage of b43_phy_mask()Michael Buesch
This patch converts code to use the new b43_phy_mask() API. The semantic patch that makes this change is as follows: // <smpl> @@ expression dev, addr, mask; @@ -b43_phy_write(dev, addr, b43_phy_read(dev, addr) & mask); +b43_phy_mask(dev, addr, mask); // </smpl> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27b43: Convert usage of b43_phy_set()Michael Buesch
This patch converts code to use the new b43_phy_set() API. The semantic patch that makes this change is as follows: // <smpl> @@ expression dev, addr, set; @@ -b43_phy_write(dev, addr, b43_phy_read(dev, addr) | set); +b43_phy_set(dev, addr, set); // </smpl> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27libertas: use private SDIO workqueue to avoid scheduling latencyDan Williams
The libertas SDIO interface scheduled the packet worker, resulting in unwanted latency for every data packet or command sent to the firmware. Fix a bug on the SDIO probe error path too. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27b43: Implement sw scan callbacksMichael Buesch
This implements the new sw scan callbacks in b43. They are currently used to turn CFP update in the microcode off while scanning. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27b43: Enable PCI slow clock workaround, if needed.Michael Buesch
Enable the PCI slow clock workaround, if we're running a PCI core rev <= 10. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27b43: Honor the no-slow-clock boardflagMichael Buesch
Do not turn off the crystal, if the boardflags tell us so. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27b43: Fix radio host flagsMichael Buesch
This fixes initialization of some radio related hostflags. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27b43: Add slot count compiletime assertionMichael Buesch
This adds a compiletime assertion for a recently introduced assumption on the slot counts. The tx header cache handling code assumes that the TX slot count can be divided evenly by the number of TX slots per frame. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: Add appropriate ANI values for AP modeSujith
The short calibration interval is different for AP mode, fix this. Also, the timer should be rearmed in the calibration routine during scanning. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: Fix PCI shutdown sequenceSujith
pci_release_region() has to be called after the device has been disabled. Also remove a stray __init attribute. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: Fix bug in EEPROM chainmask retrievalSujith
Using wrong chainmasks would have an adverse impact on performance. This patch fixes chainmask retrieval for non-PCIE cards. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: Add PER to RC debug statisticsSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: Remove multiple macro occurrencesSujith
OLC_FOR_AR9280_20_LATER is defined in multiple places, move it to a common location. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: Don't reset TSF after scanning automaticallyAlina Friedrichsen
Reset automatically the TSF on re-enabling beaconing after scanning in IBSS mode causes several problems. For example a new created IBSS network can't age before an other node has joined, because scans are done automatically in that case. And several other strange bugs more... The TSF reset is done manually in the higher level mac80211 code in the cases were it's needed, so we don't need to do it here. Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27b43: Optimize DMA buffersMichael Buesch
In the old days we used one slot per frame. But when we changed that to 2, we didn't raise the overall slot count. Which resulted in an effective division of two to the number of slots. Double the number of TX slots, so we have an effective hardware queue of 128 frames per QoS queue. Also optimize the TX header cache handling. We don't need a cached TX header for slots that will never carry an actual header. So we reduce the memory consumption of the cache by 50%. So as a net result we end up with more or less the same memory usage before and after this patch (except a few tiny meta structures), but have twice the number of TX slots available. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27b43: Fix DMA buffer size handlingMichael Buesch
This fixes hidden bugs in the size handling of the DMA buffers. This sets the RX buffer size to the theoretical max packet size and fixes passing of the size values to the device (must not subtract the header offset). These bugs are hidden and don't actually trigger due to the magic +100 offset for the buffer size. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27b43: Move DMA stop sanity checkMichael Buesch
Move the DMA stop sanity check up a few lines, so it's actually theoretically possible to trigger. (But it still shouldn't trigger, of course). Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: Filter out beacons from other BSS in STA modeVasanthakumar Thiagarajan
Passing beacons received from other BSS to s/w in non-scanning state is unnecessary in STA mode. This patch filters them out in h/w. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27iwlwifi: dma mapping read and write changesFenghua Yu
When iwlwifi runs on IOMMU, IOMMU generates a lot of PTE write faults because PTE write bit is not set on some of PTE's. This is because iwlwifi driver calls DMA mapping with PCI_DMA_TODEVICE which is read only in mapping PTE. But iwlwifi device actually writes to the mapped page to update its contents. This issue is not exposed in swiotlb. But VT-d hardware can capture this fault and stop the fault transaction. The iwl TX command contains a scratch field that is updated by uCode to indicate retry counts. For 5000 series the patch is required also for regular frames, but this patch does not differenciate. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27iwl3945: use SW rfkill from iwlwifiAbhijeet Kolekar
Patch unifies use of SW rfkill between 3945 and agn driver. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Acked-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27iwl3945: use iwl_isrAbhijeet Kolekar
iwl3945 uses iwl_isr and deletes duplicated iwl3945_isr. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Acked-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27iwl3945: remove duplicate interrupt codeAbhijeet Kolekar
Patch removes duplicate code to enable and disable interrupt. iwl3945 now uses iwlwifi's functions. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Acked-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27iwl3945: use iwl_rx_reply_error notificationAbhijeet Kolekar
Patch removes duplicate code from iwl3945 and uses iwl_rx_reply_error and spectrum notifications from iwlwifi. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Acked-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27iwl3945: use iwl rx handlersAbhijeet Kolekar
Patch removes duplicate rx handlers(pm_sleep and pm_debug) from 3945 and uses handlers from iwlwifi. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Acked-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27iwl3945: use iwl_mac_hw_scan callbackAbhijeet Kolekar
3945 can use iwl_mac_hw_scan callback instead of iwl3945_mac_hw_scan callback. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Acked-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27iwl3945: use iwl_rx_scan handlersAbhijeet Kolekar
Patch makes use of iwl_rx_scan handler for 3945. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Acked-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27at76c50x-usb: convert at76_debug to an unsigned intJason Andryuk
at76_debug should be an unsigned int as it used as a bit field. In fact, modprobe fails when trying to set at76_debug's high bit. Signed-off-by: Jason Andryuk <jandryuk@gmail.com> Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27at76c50x-usb: update to latest mac80211 hw scan apiJason Andryuk
With the latest mac80211 stack, the driver needs to be updated for cfg80211 scanning. I based the changes off of modifications for at76_usb found here: http://johannes.sipsolutions.net/patches/old/all/2008-09-19-13:35/020-cfg80211-scan.patch The trick was that max_signal also needs to be set to avoid a divide by zero Oops. I just guessed and used the value 100 for now. kvalo: handpicked the change from two different patches Signed-off-by: Jason Andryuk <jandryuk@gmail.com> Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27at76c50x-usb: add driverKalle Valo
This is a driver for usb devices based on at76c50x chipset. This is a mac80211 port of the original at76_usb driver. Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27iwlagn: default to MAX_UCODE_BEACON_INTERVAL in iwl_adjust_beacon_intervalJohn W. Linville
Default to MAX_UCODE_BEACON_INTERVAL if the output of iwl_adjust_beacon_interval would otherwise be zero. This prevents a division by zero on my iwl5300-equipped Lenovo T400 with kernels that include "mac80211: use cfg80211s BSS infrastructure". This patch is a bit of a hack -- I'm not sure why iwl_setup_rxon_timing is giving iwl_adjust_beacon_interval a zero input (which is the only way it would output zero). I would be happy to have a better fix. But for now, this makes my box boot... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27b43: Fix LO calibration txctl reg valueRoel Kluin
This patch expands the parenthesis in the txctl reg write of the LO calibration to enforce precedence rules. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27p54: misplaced parenthesesRoel Kluin
Only FIF_FCSFAIL is set due to parentheses Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ipw2x00: age scan results on resumeDan Williams
Scanned BSS entries are timestamped with jiffies, which doesn't increment across suspend and hibernate. On resume, every BSS in the scan list looks like it was scanned within the last 10 seconds, irregardless of how long the machine was actually asleep. Age scan results on resume with the time spent during sleep so userspace has a clue how old they really are. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27airo: correct improper initialization of local variableJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: Fix PTK/GTK handshake timeoutVasanthakumar Thiagarajan
Some APs don't start BA negotiation with the client before it is done with the key handshake in WPA/RSN. With those APs, key handshake times out if EAPOL frames are sent after addba request. So defer the BA negotiation until we are done with tx/rx of all EAPOL frames. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27rt2x00: Fix RF offsetIvo van Doorn
The word_base is in bytes instead of word index number, this means that when using it, it should be transformed into a word index first. Otherwise RF register reading will fail through debugfs since we would start reading 4 words starting with word 4 (which is the last valid word for RF). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>