aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2007-07-17[PATCH] zd1211rw: Add ID for Siemens Gigaset USB Stick 54Daniel Drake
Tested by David Santinoli zd1211b chip 129b:1667 v4810 high 00-01-e3 AL2230S_RF pa0 ---N- Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-17[PATCH] zd1211rw: Add ID for Planex GW-US54GXSMasakazu Mokuno
This patch adds the ID for Planex GW-US54GXS USB wireless adapter sold in Japan. Since this device returns the regulatory region as 0x49, the patch 'Allow channels 1-11 for unrecognised regulatory domains' is required. Tested by Masakazu Mokuno zd1211b chip 2019:5303 v4810 high 00-90-cc AL2230_RF pa0 ---N- Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-17[PATCH] Update version ipw2200 stamp to 1.2.2Zhu Yi
Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-17[PATCH] ipw2200: Fix ipw_isr() comments error on shared IRQZhu Yi
Signed-off-by: Tom De Man <Tom.DeMan@DZINE.BE> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-17[PATCH] Fix ipw2200 set wrong power parameter causing firmware errorZhu Yi
The power mode can only be set 0~5 to firmware. Otherwise there will be a firmware error generated. This patch fixed the invalid power mode requested by driver. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-17[PATCH] ipw2100: Fix `iwpriv set_power` errorZhu Yi
iwpriv <iface> set_power [0~6] can be used for ipw2100. '0' indicates off and '6' indicates auto. 1~5 are the actual power levels. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-17Freezer: make kernel threads nonfreezable by defaultRafael J. Wysocki
Currently, the freezer treats all tasks as freezable, except for the kernel threads that explicitly set the PF_NOFREEZE flag for themselves. This approach is problematic, since it requires every kernel thread to either set PF_NOFREEZE explicitly, or call try_to_freeze(), even if it doesn't care for the freezing of tasks at all. It seems better to only require the kernel threads that want to or need to be frozen to use some freezer-related code and to remove any freezer-related code from the other (nonfreezable) kernel threads, which is done in this patch. The patch causes all kernel threads to be nonfreezable by default (ie. to have PF_NOFREEZE set by default) and introduces the set_freezable() function that should be called by the freezable kernel threads in order to unset PF_NOFREEZE. It also makes all of the currently freezable kernel threads call set_freezable(), so it shouldn't cause any (intentional) change of behaviour to appear. Additionally, it updates documentation to describe the freezing of tasks more accurately. [akpm@linux-foundation.org: build fixes] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Nigel Cunningham <nigel@nigel.suspend2.net> Cc: Pavel Machek <pavel@ucw.cz> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (37 commits) forcedeth bug fix: realtek phy forcedeth bug fix: vitesse phy forcedeth bug fix: cicada phy atl1: reorder atl1_main functions atl1: fix excessively indented code atl1: cleanup atl1_main atl1: header file cleanup atl1: remove irq_sem cdc-subset to support new vendor/product ID 8139cp: implement the missing dev->tx_timeout myri10ge: Remove nonsensical limit in the tx done routine gianfar: kill unused header EP93XX_ETH must select MII macb: Add multicast capability macb: Use generic PHY layer s390: add barriers to qeth driver s390: scatter-gather for inbound traffic in qeth driver eHEA: Introducing support vor DLPAR memory add Fix a potential NULL pointer dereference in free_shared_mem() in drivers/net/s2io.c [PATCH] softmac: Fix ESSID problem ...
2007-07-15zd1211rw: too early inclusion of asm/unaligned.hAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (34 commits) PCI: Only build PCI syscalls on architectures that want them PCI: limit pci_get_bus_and_slot to domain 0 PCI: hotplug: acpiphp: avoid acpiphp "cannot get bridge info" PCI hotplug failure PCI: hotplug: acpiphp: remove hot plug parameter write to PCI host bridge PCI: hotplug: acpiphp: fix slot poweroff problem on systems without _PS3 PCI: hotplug: pciehp: wait for 1 second after power off slot PCI: pci_set_power_state(): check for PM capabilities earlier PCI: cpci_hotplug: Convert to use the kthread API PCI: add pci_try_set_mwi PCI: pcie: remove SPIN_LOCK_UNLOCKED PCI: ROUND_UP macro cleanup in drivers/pci PCI: remove pci_dac_dma_... APIs PCI: pci-x-pci-express-read-control-interfaces cleanups PCI: Fix typo in include/linux/pci.h PCI: pci_ids, remove double or more empty lines PCI: pci_ids, add atheros and 3com_2 vendors PCI: pci_ids, reorder some entries PCI: i386: traps, change VENDOR to DEVICE PCI: ATM: lanai, change VENDOR to DEVICE PCI: Change all drivers to use pci_device->revision ...
2007-07-11PCI: add pci_try_set_mwiRandy Dunlap
As suggested by Andrew, add pci_try_set_mwi(), which does not require return-value checking. - add pci_try_set_mwi() without __must_check - make it return 0 on success, errno if the "try" failed or error - review callers Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PCI: Change all drivers to use pci_device->revisionAuke Kok
Instead of all drivers reading pci config space to get the revision ID, they can now use the pci_device->revision member. This exposes some issues where drivers where reading a word or a dword for the revision number, and adding useless error-handling around the read. Some drivers even just read it for no purpose of all. In devices where the revision ID is being copied over and used in what appears to be the equivalent of hotpath, I have left the copy code and the cached copy as not to influence the driver's performance. Compile tested with make all{yes,mod}config on x86_64 and i386. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PCI: remove useless pci driver methodDavid Brownell
Remove pointless and never-called enable_wake() hook from pci_driver and from documentation. Evidently this was introduced in the 2.4.6 kernel, but there's no evidence it was ever called; and it was rarely implemented. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-10[NET]: Kill eth_copy_and_sum().David S. Miller
It hasn't "summed" anything in over 7 years, and it's just a straight mempcy ala skb_copy_to_linear_data() so just get rid of it. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10[PATCH] use list_for_each_entry() for iteration in Prism 54 driverMatthias Kaehlcke
Use list_for_each_entry() instead of manual iteration and substitute a list_for_each_safe() loop with list_for_each_entry_safe() Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Acked-by: Luis R. Rodriguez <mcgrof@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-10[PATCH] libertas: fix disabling WPADan Williams
Found by Guillaume LECERF <glecerf@gmail.com> Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-10[PATCH] drivers/net/wireless/libertas/wext.c: remove dead codeAdrian Bunk
This patch removes dead code introduced by commit 90a42210f275e1f828eb6c08bf8252c2d6a774e0 and spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-10[PATCH] zd1211rw: Defer firmware load until first ifupDaniel Drake
While playing with the firmware a while back, I discovered a way to access the device's entire address space before the firmware has been loaded. Previously we were loading the firmware early on (during probe) so that we could read the MAC address from the EEPROM and register a netdevice. Now that we can read the EEPROM without having firmware, we can defer firmware loading until later while still reading the MAC address early on. This has the advantage that zd1211rw can now be built into the kernel -- previously if this was the case, zd1211rw would be loaded before the filesystem is available and firmware loading would fail. Firmware load and other device initialization operations now happen the first time the interface is brought up. Some architectural changes were needed: handling of the is_zd1211b flag was moved into the zd_usb structure, MAC address handling was obviously changed, and a preinit_hw stage was added (the order is now: init, preinit_hw, init_hw). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-10[PATCH] zd1211rw: Add ID for Buffalo WLI-U2-KG54LDaniel Drake
Tested by Zen Kato zd1211b chip 0411:00da v4810 high 00-16-01 AL2230S_RF pa0 g--N- Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-10[PATCH] zd1211rw: Detect more AL2230S radiosDaniel Drake
Zen Kato has a device which reports the 0xa RF type. The vendor driver treats this as AL2230S, the same as devices with the AL2230S bit in the POD. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-10[PATCH] zd1211rw: Allow channels 1-11 for unrecognised regulatory domainsDaniel Drake
Zen Kato's device has a regulatory domain value of 0x49, which is not an IEEE 802.11 code and is not even identified in the vendor driver. Recent versions of the vendor driver don't even look at the regdomain value any more, and just allow channels 1-11 everywhere. This patch brings us more in line with that behaviour, by allowing channels 1-11 for regdomains which we don't know about. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-10[PATCH] airo: start with radio offMichal Schmidt
Don't turn the radio on until the interface is up. This saves some power in case the driver is loaded but the card is not used. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-10[PATCH] airo: simpler calling convention for enable_MAC()Michal Schmidt
Callers of enable_MAC() shouldn't have to worry about the bits in the response's status word (and most of them don't). The return value is sufficient information. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-10[PATCH] airo: fix a race causing initialization failuresMichal Schmidt
Matteo Croce reported Aironet initialization failures. They were caused by a race in airo. airo finds a free interface name, then initializes the card and finally registers the interface. Another device may get the same name in the meantime. The reason airo gets its name early is to use it in informative printks and to name the resources it requests. The printks will be just fine without the interface name and the resources can use the driver's name - that's what other network drivers do anyway. One of the talkative functions is setup_card(). It is called once before registration and can be called later again. Let's have an empty dev->name during the first call, so it doesn't print the ugly "airo(eth%d)" message. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-10[PATCH] airo: delay some initialization until the netdev is upMichal Schmidt
airo's kernel thread and the IRQ handler are needed only when the interface is up. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-10[PATCH] airo: disable the PCI device when unloading moduleMichal Schmidt
Fix an assymetry between pci_{enable,disable}_device. airo did not disable the PCI device when unloading the module. This caused suspend failures after modprobe -r airo && modprobe airo. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-10[PATCH] ipw2100: RF kill switch timer power saveStephen Hemminger
Similar patch to ipw2200. Round the timer used for RF kill switch off to 1 second boundary to save power. Build tested only, don't have this hardware. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-10[PATCH] ipw2200: rf kill switch polling power savingStephen Hemminger
Make the ipw2200 driver polling of rf kill switch occur on second boundaries to reduce power. Making all the wakeup's in the system occur together reduces power, and keeps CPU in idle longer. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-10[PATCH] rtl8187: fix endianness issue in rtl8225 register writingMichael Wu
I failed to notice that a u16 was being passed to the hardware. This fixes it. Thanks to Kasper F. Brandt for finding this! Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-10[PATCH] libertas: fix use-after-free in rx pathHolger Schurig
... by removing an ill-conceived, useless line. Discovered by coverity. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-10[PATCH] WIRELESS: Remove clearly obsolete libertas/version.h file.Robert P. J. Day
Remove a header file that was ostensibly "removed" before, in commit 3ce40232. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-08[PATCH] hostap: Remove driver version numberJouni Malinen
The driver version number has not been updated since the driver was included in the main kernel tree and there is no plan on updating this in the future either. At this point, the only correct way to refer to the version is to use the kernel version. The 0.4.4 version is confusing since there are external version with higher version number even though they are not actually any newer than the in-tree version. Let's get rid of the version number in the kernel tree in order to avoid this kind of confusion. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-08[PATCH] hostap: Use list_for_each_entryMatthias Kaehlcke
Use list_for_each_entry() instead of manual iteration and substitute some list_for_each() loops with list_for_each_entry(). Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-08[PATCH] hostap: Suppress broadcast if no stations are associatedPavel Roskin
This may be useful in mesh setups when most stations act as repeaters only. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-08[PATCH] bcm43xx: Fix deviation from specifications in set_baseband_attenuationLarry Finger
A disagreement between the specifications and the bcm43xx code has just been discovered and is hereby fixed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-08[PATCH] zd1211rw: Make CCK gain patching conditional on RF typeDaniel Drake
The vendor driver code suggests that CR47 patching happens on every channel change for every RF (depending on bit 8 in POD). Due to a bug in their driver (upper bits of RF_Mode get zeroed out, then are examined for 1s when setting some other flags), this isn't actually what happens, and their generic CCK patching routine never takes effect. Some of their RF configurations do include explicit (duplicated) code for CR47 patching though. This patch makes zd1211rw match that behaviour. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-08[PATCH] zd1211rw: Add UW2453 RF supportDaniel Drake
This patch adds support for another radio appearing in new devices: the Ubec UW2453. It's more complicated than the other RF's we support, but Ubec publish full tech specs so we're able to understand the vendor code relatively well. Now that we support UW2453, we also support Atheros' new USB chip: the AR5007UG. From the little info we have, this appears to be just a rebranded ZD1211B. This RF code doesn't work very well -- lots more TX/RX errors than the other RFs. However, the vendor driver doesn't do any better, so this is all we can do for now. [kune@deine-taler.de: bug fixes] Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-08[PATCH] zd1211rw: Extend RF layerDaniel Drake
These changes are needed for UW2453 RF support: Add pointer which RF drivers can use to store private RF data Add exit hook so that RF drivers can free private data Allow RF's to disable the generic TX power integration handling code Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-08[PATCH] zd1211rw: Add ID for ZyXEL G-200v2Daniel Drake
Tested by Guy Gallagher zd1211 chip 0586:3407 v4721 high 00-13-49 AL2230_RF pa0 g--- FCC ID SI5WUB200Z Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-08[PATCH] rtl8187: add header blocks and indicate origin of magic valuesJohn W. Linville
Add top-of-file comment blocks to rtl818x headers and attribute origin of magic values to original r8187 driver. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-08[PATCH] Add rtl8187 wireless driverMichael Wu
This patch adds a mac80211 based wireless driver for the rtl8187 USB wireless card. Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-28[PATCH] libertas: remove private ioctlsDan Williams
Signed-off-by: Christoph Hellwig <hch@infradead.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-28[PATCH] libertas: fix WPA associations by handling ENABLE_RSN correctlyDan Williams
Don't clobber the firmware's internal state machine by setting ENABLE_RSN more than once during the 4-way handshake. Check what the ENABLE_RSN status is and only set if it should be changed. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-28[PATCH] libertas: kill wlan_scan_process_resultsDan Williams
Fold into wlan_scan_networks() and protect with debug defines. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-28[PATCH] libertas: style fixesDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-12[PATCH] libertas: convert libertas_mpp into anycast_maskLuis Carlos
With firmware 5.220.11.p5, this allows to specify the anycast addresses the device will listen to. The anycast address range is C0:27:C0:27:C0:XX where XX goes from 00 to 1F (or 0 to 31 in dec). The value to write on anycast_mask will specify which addresses the device listens to. Bits in a 32 bit int are numbered from 0 (least significative bit) to 31. A specific address ending in YY will be listened to if bit YY in the value is set to one. Examples: 0x00000000 : do not listen to any anycast address 0xFFFFFFFF : listen to every anycast address from :00 to :1F 0x00000013 : listen to anycast addresses :00, :01 and :04 Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-12[PATCH] libertas: actually send mesh frames to mesh netdevDan Williams
Found by Luis; got broken during module split. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-12[PATCH] libertas: deauthenticate from AP in channel switchLuis Carlos Cobo Rus
This avoids channel mismatch between driver and firmware in case we change channel while associated to an AP. Signed-off-by: Luis Carlos Cobo Rus <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-12[PATCH] libertas: pull current channel from firmware on mesh autostartLuis Carlos Cobo Rus
Signed-off-by: Luis Carlos Cobo Rus <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: reduce SSID and BSSID mixed-case abuseDan Williams
Kill mixed case function names from scan.c/scan.h. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>