aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2007-02-27[netdrvr] tc35815: fix obvious bugsJeff Garzik
* clear_page() use is wrong. We might have multiple pages. Use memset() instead. * Call pci_unregister_driver() in module exit. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-26Merge master.kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6: (78 commits) [PARISC] Use symbolic last syscall in __NR_Linux_syscalls [PARISC] Add missing statfs64 and fstatfs64 syscalls Revert "[PARISC] Optimize TLB flush on SMP systems" [PARISC] Compat signal fixes for 64-bit parisc [PARISC] Reorder syscalls to match unistd.h Revert "[PATCH] make kernel/signal.c:kill_proc_info() static" [PARISC] fix sys_rt_sigqueueinfo [PARISC] fix section mismatch warnings in harmony sound driver [PARISC] do not export get_register/set_register [PARISC] add ENTRY()/ENDPROC() and simplify assembly of HP/UX emulation code [PARISC] convert to use CONFIG_64BIT instead of __LP64__ [PARISC] use CONFIG_64BIT instead of __LP64__ [PARISC] add ASM_EXCEPTIONTABLE_ENTRY() macro [PARISC] more ENTRY(), ENDPROC(), END() conversions [PARISC] fix ENTRY() and ENDPROC() for 64bit-parisc [PARISC] Fixes /proc/cpuinfo cache output on B160L [PARISC] implement standard ENTRY(), END() and ENDPROC() [PARISC] kill ENTRY_SYS_CPUS [PARISC] clean up debugging printks in smp.c [PARISC] factor syscall_restart code out of do_signal ... Fix conflict in include/linux/sched.h due to kill_proc_info() being made publicly available to PARISC again.
2007-02-26[TG3]: TSO workaround fixes.Michael Chan
1. Add race condition check after netif_stop_queue(). tg3_tx() runs without netif_tx_lock and can race with tg3_start_xmit_dma_bug() -> tg3_tso_bug(). 2. Firmware TSO in 5703/5704/5705 also have the same TSO limitation, i.e. they cannot handle TSO headers bigger than 80 bytes. Rename TG3_FL2_HW_TSO_1_BUG to TG3_FL2_TSO_BUG and set this flag on these chips as well. 3. Update version to 3.74. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-21Revert "e1000: fix shared interrupt warning message"Linus Torvalds
This reverts commit d2ed16356ff4fb9de23fbc5e5d582ce580390106. As Thomas Gleixner reports: "e1000 is not working anymore. ifup fails permanentely. ADDRCONF(NETDEV_UP): eth0: link is not ready nothing else" The broken commit was identified with "git bisect". Auke Kok says: "I think we need to drop this now. The report that says that this *fixes* something might have been on regular interrupts only. I currently suspect that it breaks all MSI interrupts, which would make sense if I look a the code. Very bad indeed." Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Auke Kok <auke-jan.h.kok@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (21 commits) natsemi: Support Aculab E1/T1 PMXc cPCI carrier cards natsemi: Add support for using MII port with no PHY skge: race with workq and RTNL Replace local random function with random32() s2io: RTNL and flush_scheduled_work deadlock 8139too: RTNL and flush_scheduled_work deadlock sis190: RTNL and flush_scheduled_work deadlock r8169: RTNL and flush_scheduled_work deadlock [PATCH] ieee80211softmac: Fix setting of initial transmit rates [PATCH] bcm43xx: OFDM fix for rev 1 cards [PATCH] bcm43xx: Fix for 4311 and 02/07/07 specification changes [PATCH] prism54: correct assignment of DOT1XENABLE in WE-19 codepaths [PATCH] zd1211rw: Readd zd_addr_t cast [PATCH] bcm43xx: Fix for oops on resume [PATCH] bcm43xx: Ignore ampdu status reports [PATCH] wavelan: Use ARRAY_SIZE macro when appropriate [PATCH] hostap: Use ARRAY_SIZE macro when appropriate [PATCH] misc-wireless: Use ARRAY_SIZE macro when appropriate [PATCH] ipw2100: Use ARRAY_SIZE macro when appropriate [PATCH] bcm43xx: Janitorial change - remove two unused variables ...
2007-02-20[NET] Eliminate user-selectable CONFIG_MV643XX_ETH_[012]Dale Farnsworth
Remove the use of CONFIG_MV643XX_ETH_[012] variables on most platforms. Instead, platform-specific code enables the ports supported by the hardware. After this patch, these config variables are only used in arch/ppc, so also move them from drivers/net/Kconfig to arch/ppc/Kconfig. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Jeff Garzik <jeff@garzik.org> Cc: Paul Mackerras <paulus@samba.org>
2007-02-20Merge branch 'upstream-jgarzik' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream
2007-02-20natsemi: Support Aculab E1/T1 PMXc cPCI carrier cardsMark Brown
Aculab E1/T1 PMXc cPCI carrier card cards present a natsemi on the cPCI bus with an oversized EEPROM using a direct MII<->MII connection with no PHY. This patch adds a new device table entry supporting these cards. Signed-Off-By: Mark Brown <broonie@sirena.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-20natsemi: Add support for using MII port with no PHYMark Brown
This patch provides code paths which allow the natsemi driver to use the external MII port on the chip but ignore any PHYs that may be attached to it. The link state will be left as it was when the driver started and can be configured via ethtool. Any PHYs that are present can be accessed via the MII ioctl()s. This is useful for systems where the device is connected without a PHY or where either information or actions outside the scope of the driver are required in order to use the PHYs. Signed-Off-By: Mark Brown <broonie@sirena.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-20skge: race with workq and RTNLStephen Hemminger
If a workqueue function that needs RTNL is running when skge_down is called then a deadlock is possible. Fix by only clearing the timer, and handling the flush_scheduled_work on removal. This work queue is only ever used for the old fiber based boards. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-20Replace local random function with random32()Ralf Baechle
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-20s2io: RTNL and flush_scheduled_work deadlockFrancois Romieu
Mantra: don't use flush_scheduled_work with RTNL held. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-208139too: RTNL and flush_scheduled_work deadlockFrancois Romieu
Your usual dont-flush_scheduled_work-with-RTNL-held stuff. It is a bit different here since the thread runs permanently or is only occasionally kicked for recovery depending on the hardware revision. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-20sis190: RTNL and flush_scheduled_work deadlockFrancois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-20r8169: RTNL and flush_scheduled_work deadlockFrancois Romieu
flush_scheduled_work() in net_device->close has a slight tendency to deadlock with tasks on the workqueue that hold RTNL. rtl8169_close/down simply need the recovery tasks to not meddle with the hardware while the device is going down. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (25 commits) Documentation/kernel-docs.txt update. arch/cris: typo in KERN_INFO Storage class should be before const qualifier kernel/printk.c: comment fix update I/O sched Kconfig help texts - CFQ is now default, not AS. Remove duplicate listing of Cris arch from README kbuild: more doc. cleanups doc: make doc. for maxcpus= more visible drivers/net/eexpress.c: remove duplicate comment add a help text for BLK_DEV_GENERIC correct a dead URL in the IP_MULTICAST help text fix the BAYCOM_SER_HDX help text fix SCSI_SCAN_ASYNC help text trivial documentation patch for platform.txt Fix typos concerning hierarchy Fix comment typo "spin_lock_irqrestore". Fix misspellings of "agressive". drivers/scsi/a100u2w.c: trivial typo patch Correct trivial typo in log2.h. Remove useless FIND_FIRST_BIT() macro from cardbus.c. ...
2007-02-17Merge branch 'upstream' into upstream-jgarzikJohn W. Linville
Conflicts: net/ieee80211/softmac/ieee80211softmac_module.c net/ieee80211/softmac/ieee80211softmac_wx.c
2007-02-17sk98lin: mark deprecated in KconfigDaniel Drake
sk98lin is scheduled for removal in July 2007. This patch makes the deprecation more obvious in the configuration interface. FWIW, Gentoo have been shipping a patch very similar to this for a long time. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17Hostess SV-11 depends on INETBaruch Even
Comtrol Hostess SV-11 driver uses features from INET but doesn't depend on it. The simple solution is to make it depend on INET as happens for the sealevel driver. Fixes bug #7930. Signed-Off-By: Baruch Even <baruch@ev-en.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17Fix link autonegotiation timer.Ralf Baechle
Start link negotiation in the open method. Previously it was started on driver initialialization and shutdown on close so an ifdown would have results in closing negotiation for good. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17sk98lin: planned removalStephen Hemminger
Nag message about planned sk98lin removal. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17B44: increase wait loopGary Zambrano
The b44 Enet control disable bit may take longer to clear on some systems, so the loop count is increased with this patch. Functionality is not compromised, but a debug message can be seen when the bit is not cleared within the count value. Thanks to Vasileios Lourdas who reported the problem. Signed-off by: Gary Zambrano <zambrano@broadcom.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17b44: replace defineGary Zambrano
Replaced B44_DMA_MASK with DMA_30BIT_MASK. Signed-off by: Gary Zambrano <zambrano@broadcom.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17e1000: allow ethtool to see link status when downKok, Auke
By reading the MAC status register we can detect whether the MAC has seen the PHY see link. This allows us to show the link properties before the device is up in ethtool. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17e1000: remove obsolete custom pci_save_state codeKok, Auke
Now that 2.6.19 provides a proper implementation that saves MSI, PCI-E config space, we can have the e1000 driver use those instead of it's custom implementation. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17e1000: fix shared interrupt warning messageKok, Auke
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17bugfixes and new hardware support for arcnet driverJeff Morrow
The modifications and bug fixes noted below were done by Realtime Control Works and Contemporary Control Systems, Inc, Jan 2005. They were incorporated into the 2.6 kernel by Jeff Morrow of Sierra Analytics, Feb 2007. <jmorrow@massspec.com> The changes have been tested on a Contemporary Controls PCI20U-4000. Summary of changes: Arc-rawmode.c: rx(): - Fixed error in received packet lengths; 256 byte packets were being received as 257 bytes packets. prepare_tx(): - Fixed error in transmit length calcs; 257 byte packets were being transmitted as 260 byte packets. com20020.c: com20020_check(): - We now load the SETUP2 register if the 'clockm' parameter is non-zero, instead of checking for ARC_CAN_10MBIT. The user is now responsible for whether or not SETUP2 is loaded. If the clock multiplier is non-zero, this means that the user wants a baud rate greater than 2.5Mbps. This is not possible unless the SETUP2 register is present (COM20020D, or COM20022). So, we're relying on the user to be smart about what kind of chip he's dealing with... com20020-pci.c - Added several entries to com20020pci_id_table[]. Signed-off-by: Jeff Morrow <jmorrow@massspec.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17pcnet32 NAPI no longer experimentalpcnet32@verizon.net
Remove the experimental tag for the pcnet32 NAPI implementation. Signed-off-by: Don Fry <pcnet32@verizon.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17macb: Remove inappropriate spinlocks around mii callsHaavard Skinnemoen
Remove spin_lock_irqsave() around mii_ethtool_gset, mii_ethtool_sset and generic_mii_ioctl. These are unnecessary and harmful because the mii calls may call back into the mdio functions, which may sleep. Pointed out by David Brownell. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17Convert meth to netdev_privRalf Baechle
And while at it loose plenty of useless casts. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17sky2: v1.13Stephen Hemminger
New version. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17sky2: receive error handling improvementsStephen Hemminger
Don't drop oversize frame it might be a VLAN (untagged). Use different counter for fifo overrun vs fifo error. Print error on fifo overrrun. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17sky2: transmit timeoutStephen Hemminger
The transmit timeout code could hang, and it would not clear out problems if the hardware was stuck. Change the code to effectively do a device down/up similar to the suspend/resume code. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17sky2: flow control negotiation for Yukon-FEStephen Hemminger
The Yukon-FE chip doesn't do gigabit and has a differen PHY internally. On this chip, phy status register doesn't properly reflect the result of flow control negotiation. To workaround the problem and avoid having to have so much chip dependent code; compute the result of flow control by looking at the local and remote advertised bits. Signed-off-by: Stephen Hemmminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17sky2: no need to reset pause bits on shutdownStephen Hemminger
Resetting the pause bits on shutdown is not necessary. The code was inherited from the vendor driver, and it is currently #ifdef'd out there as well. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17sky2: dont flush good pause framesStephen Hemminger
Don't mark pause frames as errors. This problem caused transmitter not to pause and would effectively take out a gigabit switch because the it can't handle overrun. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17cxgb3 Fix copyrights in the cxgb3 driver.Steve Wise
Fix copyrights in the cxgb3 driver. Remove the Open Grid Computing copyright. It shouldn't be there. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17gianfar: don't duplicate gfar_error()Sergei Shtylyov
It was hardly necessary to repeat most of the code from gfar_error() in gfar_interrupt(), especially having some inconsistencies between the two. So, make the gfar_interrupt() just call gfar_error(), and not acknowledge the interrupts itself as gfar_{receive/transmit/error}() do it anyway. While at it, also clarify/cleanup debug messages in gfar_error()... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17NetXen: Fix to get the driver working after sparse changesAmit S. Kale
Signed-off-by: Amit S. Kale <amitkale@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17net/wan/pc300too.c: pci_module_init to pci_register_driverRichard Knutsson
Convert pci_module_init() to pci_register_driver(). Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17atl1: bump version numberJay Cliburn
Bump the version number. Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17atl1: add L1 device id to pci_ids, then use itChris Snook
Add device id for the Attansic L1 chip to pci_ids.h, then use it. Signed-off-by: Chris Snook <csnook@redhat.com> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17atl1: remove unused defineChris Snook
Remove unused define from atl1_main.c. Signed-off-by: Chris Snook <csnook@redhat.com> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17atl1: read MAC address from registerJay Cliburn
On some Asus motherboards containing the L1 NIC, the MAC address is written by the BIOS directly to the MAC register during POST, and is not stored in eeprom. If we don't succeed in fetching the MAC address from eeprom or spi, try reading it directly from the MAC register. Suggested by Xiong Huang. And do some cleanup while we've got the hood up... Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Chris Snook <csnook@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17atl1: fix bad ioread addressAl Viro
An ioread32 statement reads the wrong address. Fix it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Chris Snook <csnook@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17atl1: drop NET_PCI from KconfigJay Cliburn
The atl1 driver doesn't need NET_PCI. Remove it from Kconfig. Noticed by Chad Sprouse. Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Chris Snook <csnook@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17PCMCIA-NETDEV : the 2nd argument of el3_interrrupt and smc_interrupt is ↵Komuro
struct net_device* Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17phylib: Add support for Marvell 88e1111S and 88e1145Andy Fleming
Changes include: * New support for 88e1145 * New support for 88e111s * Fixing 88e1101 driver to not match non-88e1101 PHYs * Increases in feature support across Marvell PHY product line * Fixes a bunch of whitespace issues found by Lindent Signed-off-by: Andrew Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17Merge branch 'master' into upstreamJeff Garzik
2007-02-17Merge branch 'gfar' of ↵Jeff Garzik
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into upstream
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-07 20:06:57 +0000