aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2007-04-25[ETH]: Make eth_type_trans set skb->dev like the other *_type_transArnaldo Carvalho de Melo
One less thing for drivers writers to worry about. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[HIPPI/FDDI]: Make {hippi,fddi}_type_trans set skb->devArnaldo Carvalho de Melo
Now all the _type_trans routines are consistent in this regard. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[TR]: Make tr_type_trans set skb->devArnaldo Carvalho de Melo
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[TR]: Use tr_hdr() were appropriateArnaldo Carvalho de Melo
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-24Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [BNX2]: Fix occasional NETDEV WATCHDOG on 5709. [IPV6]: Disallow RH0 by default. [XFRM]: beet: fix pseudo header length value [TCP]: Congestion control initialization.
2007-04-24[BNX2]: Fix occasional NETDEV WATCHDOG on 5709.Michael Chan
Tweak a register setting to prevent the tx mailbox from halting. Update version to 1.5.8. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-24drivers/net/hamradio/baycom_ser_fdx build fixAndrew Morton
sparc64: drivers/net/hamradio/baycom_ser_fdx.c: In function `ser12_open': drivers/net/hamradio/baycom_ser_fdx.c:417: error: `NR_IRQS' undeclared (first us e in this function) drivers/net/hamradio/baycom_ser_fdx.c:417: error: (Each undeclared identifier is reported only once drivers/net/hamradio/baycom_ser_fdx.c:417: error: for each function it appears i n.) Cc: Folkert van Heusden <folkert@vanheusden.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-24sis900: Allocate rx replacement buffer before rx operationNeil Horman
The sis900 driver appears to have a bug in which the receive routine passes the skbuff holding the received frame to the network stack before refilling the buffer in the rx ring. If a new skbuff cannot be allocated, the driver simply leaves a hole in the rx ring, which causes the driver to stop receiving frames and become non-recoverable without an rmmod/insmod according to reporters. This patch reverses that order, attempting to allocate a replacement buffer first, and receiving the new frame only if one can be allocated. If no skbuff can be allocated, the current skbuf in the rx ring is recycled, dropping the current frame, but keeping the NIC operational. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-24[netdrvr] depca: handle platform_device_add() failureAndrea Righi
The following patch fixes a kernel bug in depca_platform_probe(). We don't use a dynamic pointer for pldev->dev.platform_data, so it seems that the correct way to proceed if platform_device_add(pldev) fails is to explicitly set the pldev->dev.platform_data pointer to NULL, before calling the platform_device_put(pldev), or it will be kfree'ed by platform_device_release(). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-23Add missing USRobotics Wireless Adapter (Model 5423) id into zd1211rwS.Çağlar Onur
USRobotics Wireless Adapter (Model 5423) works well with current zd1211rw driver also (i have tested 2.6.18, 2.6.20 and 2.6.21-rc7). It just needs its ID added to the list of devices. Signed-off-by: S.Çağlar Onur <caglar@pardus.org.tr> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-23Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SUNHME]: Fix module unload. [SUNLANCE]: Fix module unload. [SUNQE]: Fix MAC address assignment. [SBUS] vfc_dev.c: kzalloc
2007-04-23Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [PPP]: Fix skbuff.c:BUG due incorrect logic in process_input_packet()
2007-04-21[SUNHME]: Fix module unload.Marcel van Nies
Signed-off-by: Marcel van Nies <morcles@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21[SUNLANCE]: Fix module unload.Marcel van Nies
Signed-off-by: Marcel van Nies <morcles@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-21[SUNQE]: Fix MAC address assignment.Marcel van Nies
The MAC address assignment at module loading is simply forgotten. The bug at module unloading is caused by an incorrect call. The bug at module unloading does not only happen for sunqe, sunlance and sunhme (sbus) suffer from it too. I've tested this on my SS20. Signed-off-by: Marcel van Nies <morcles@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-19Revert "e1000: fix NAPI performance on 4-port adapters"Linus Torvalds
This reverts commit 60cba200f11b6f90f35634c5cd608773ae3721b7. It's been linked to lockups of the e1000 hardware, see for example https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=229603 but it's likely that the commit itself is not really introducing the bug, but just allowing an unrelated problem to rear its ugly head (ie one current working theory is that the code exposes us to a hardware race condition by decreasing the amount of time we spend in each NAPI poll cycle). We'll revert it until root cause is known. Intel has a repeatable reproduction on two different machines and bus traces of the hardware doing something bad. Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: David S. Miller <davem@davemloft.net> Cc: Greg KH <gregkh@suse.de> Cc: Dave Jones <davej@redhat.com> Cc: Auke Kok <auke-jan.h.kok@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-19[PPP]: Fix skbuff.c:BUG due incorrect logic in process_input_packet()Paul Mackerras
From: Paul Mackerras <paulus@samba.org> This fixes: Subject: kernel BUG at net/core/skbuff.c in linux-2.6.21-rc6 process_input_packet() treats the case where the first byte is 0xff (PPP_ALLSTATIONS) but the second byte is 0x03 (PPP_UI) as indicating a packet with a PPP protocol number of 0xff. Arguably that's wrong since PPP protocol 0xff is reserved, and the RFC does envision the possibility of receiving frames where the control field has values other than 0x03. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-19sky2: version 1.14Stephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-19sky2: no jumbo on Yukon FEStephen Hemminger
The Yukon FE (100mbit only) chips do not support large packets. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-19sky2: EC-U performance and jumbo supportStephen Hemminger
The Yukon EC Ultra chips have transmit settings for store and forward and PCI buffering. By setting these appropriately, normal performance goes from 750Mbytes/sec to 940Mbytes/sec (non-jumbo). It is also possible to do Jumbo mode, but it means turning off TSO and checksum offload so the performance gets worse. There isn't enough buffering for checksum offload to work. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-19sky2: disable ASF on all chip typesStephen Hemminger
Need to make sure and disable ASF on all chip types. Otherwise, there may be random reboots. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-19sky2: handle descriptor errorsStephen Hemminger
There should never be descriptor error unless hardware or driver is buggy. But if an error occurs, print useful information, clear irq, and recover. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-19sky2: disable support for 88E8056Stephen Hemminger
This device is having all sorts of problems that lead to data corruption and system instability. It gets receive status and data out of order, it generates descriptor and TSO errors, etc. Until the problems are resolved, it should not be used by anyone who cares about there system. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-19gianfar needs crc32 lib dependencyDave Jiang
Gianfar needs crc32 to be selected to compile. Signed-off-by: Dave Jiang <djiang@mvista.com> -- drivers/net/Kconfig | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) -- Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-19spidernet: Fix problem sending IP fragmentsLinas Vepstas
The basic structure of "normal" UDP/IP/Ethernet frames (that actually work): - It starts with the Ethernet header (dest MAC, src MAC, etc.) - The next part is occupied by the IP header (version info, length of packet, id=0, fragment offset=0, checksum, from / to address, etc.) - Then comes the UDP header (src / dest port, length, checksum) - Actual payload - Ethernet checksum Now what's different for IP fragment: - The IP header has id set to some value (same for all fragments), offset is set appropriately (i.e. 0 for first fragment, following according to size of other fragments), size is the length of the frame. - UDP header is unchanged. I.e. length is according to full UDP datagram, not just the part within the actual frame! But this is only true within the first frame: all following frames don't have a valid UDP-header at all. The spidernet silicon seems to be quite intelligent: It's able to compute (IP / UDP / Ethernet) checksums on the fly and tests if frames are conforming to RFC -- at least conforming to RFC on complete frames. But IP fragments are different as explained above: I.e. for IP fragments containing part of a UDP datagram it sees incompatible length in the headers for IP and UDP in the first frame and, thus, skips this frame. But the content *is* correct for IP fragments. For all following frames it finds (most probably) no valid UDP header at all. But this *is* also correct for IP fragments. The Linux IP-stack seems to be clever in this point. It expects the spidernet to calculate the checksum (since the module claims to be able to do so) and marks the skb's for "normal" frames accordingly (ip_summed set to CHECKSUM_HW). But for the IP fragments it does not expect the driver to be capable to handle the frames appropriately. Thus all checksums are allready computed. This is also flaged within the skb (ip_summed set to CHECKSUM_NONE). Unfortunately the spidernet driver ignores that hints. It tries to send the IP fragments of UDP datagrams as normal UDP/IP frames. Since they have different structure the silicon detects them the be not "well-formed" and skips them. The following one-liner against 2.6.21-rc2 changes this behavior. If the IP-stack claims to have done the checksumming, the driver should not try to checksum (and analyze) the frame but send it as is. Signed-off-by: Norbert Eicker <n.eicker@fz-juelich.de> Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-19cxgb3 - PHY interrupts and GPIO pins.Divy Le Ray
Remove assumption that PHY interrupts use GPIOs 3 and 5. Deal with PHY interrupts connected to any GPIO pins. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-19cxgb3 - Fix low memory conditionsDivy Le Ray
Reuse the incoming skb when a clientless abort req is recieved. The release of RDMA connections HW resources might be deferred in low memory situations. Ensure that no further activity is passed up to the RDMA driver for these connections. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-11Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2007-04-11myri10ge: update driver version to 1.3.0-1.233Brice Goglin
Update the myri10ge driver version number to 1.3.0-1.233. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-11myri10ge: more Intel chipsets providing aligned PCIe completionsBrice Goglin
Add the Intel 5000 southbridge (aka Intel 6310/6311/6321ESB) PCIe ports and the Intel E30x0 chipsets to the whitelist of aligned PCIe completion. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-11myri10ge: fix management of the firmware 4KB boundary crossing restrictionBrice Goglin
Simpler way of dealing with the firmware 4KB boundary crossing restriction for rx buffers. This fixes a variety of memory corruption issues when using an "uncommon" MTU with a 16KB page size. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-11cxgb3 - missing CPL hanler and register setting.Divy Le Ray
Remove specific CPL handler. Add missing CPL handler. Add missing register setting when the interface is brought up. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-11cxgb3 - MAC watchdog updateDivy Le Ray
The MAC watchdog was failing if the peer interface was brought down. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-11cxgb3 - avoid deadlock with mac watchdogDivy Le Ray
Fix a deadlock when the interface s configured down and the watchdog tack is sleeping on rtnl_lock. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-11skge: fix wake on lanStephen Hemminger
Need to rework wake on lan code to setup properly and get activated on shutdown (and suspend), not when ethtool is run. This does not need to go to stable queue because wake on lan was not even included in 2.6.20 (or earlier versions). Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-11sky2: phy workarounds for Yukon EC-U A1Stephen Hemminger
The workaround Yukon EC-U wasn't comparing with correct version and wasn't doing correct setup. Without it, 88e8056 throws all sorts of errors. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-11sky2: turn on clocks when doing resumeStephen Hemminger
Some of these chips are disabled until clock is enabled. This fixes: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=404107 Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-11sky2: turn carrier off when downStephen Hemminger
Driver needs to turn off carrier when down. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-11skge: turn carrier off when downStephen Hemminger
Driver needs to turn off carrier when down, otherwise it can confuse bonding and bridging and looks like carrier is on immediately when it is brought back up. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-10[PATCH] bcm43xx: Fix PPC machine checks and match loopback gain specsLarry Finger
The specifications for loopback_gain calculation and for G PHY initialization have been updated. This patch implements them and fixes a machine check error that occurs for PPC architecture with a phy->rev of 1. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-10[PATCH] bcm43xx: Fix 802.11b/g scan limits to match regulatory reqsLarry Finger
In 802.11b/g mode, bcm43xx actively scans channels 1-14 no matter what locale has been set, either in the sprom or by the locale option. This behaviorviolates regulatory rules everywhere in the world except Japan. This patch changes the default range to the correct value if the locale has been set, and to channels 1-13 if no locale has been set. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-10[PATCH] zd1211rw: Fix E2P_PHY_REG patchingDaniel Drake
Due to conflicting/confusing defines in the vendor driver, we were reading E2P_PHY_REG from the wrong location. CR157 patching was slightly incorrect in that the vendor driver only patches in an 8-bit value, whereas we were patching 24 bits. Additionally, CR157 patching was happening on both zd1211 and zd1211b, but this should only happen on zd1211. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-10[PATCH] zd1211rw: Reject AL2230S devicesDaniel Drake
zd1211rw currently detects AL2230S-based devices as AL2230, and hence programs the RF incorrectly. Transmit silently fails on this misconfiguration. After this patch, AL2230S devices are rejected with an error message, to avoid any confusion with an apparent driver bug. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-09[SC92031]: Fix priv->lock contextHerbert Xu
The spin_lock calls made in dev->open and dev->close must disable BH since open/close are made in process context. Conversely, the call in dev->hard_start_xmit does not need to disable BH since it is already executing with BH disabled. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-06[TG3]: Fix crash during tg3_init_one().Michael Chan
The driver will crash when the chip has been initialized by EFI before tg3_init_one(). In this case, the driver will call tg3_chip_reset() before allocating consistent memory. The bug is fixed by checking for tp->hw_status before accessing it during tg3_chip_reset(). Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-03r8169: fix suspend/resume for down interfaceFrancois Romieu
The PM hooks are no-op if the r8169 interface is down (i.e. !IFF_UP). However, as the chipset is enabled, the device will not work after a suspend/resume cycle. The patch always issue the required PCI suspend sequence and removes the module unload/reload workaround. Signed-off-by: Arnaud Patard <apatard@mandriva.com> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-03r8169: issue request_irq after the private data are completely initializedFrancois Romieu
The irq handler schedules a NAPI poll request unconditionally as soon as the status register is not clean. It has been there - and wrong - for ages but a recent timing change made it apparently easier to trigger. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-03b44: fix IFF_ALLMULTI handling of CAM slotsBill Helfinstine
If you set the IFF_ALLMULTI flag on a b44 device, or if you join more than B44_MCAST_TABLE_SIZE multicast groups, the device will stop receiving unicast messages. This is because the __b44_set_mac_addr call sets the zeroth CAM entry to the MAC address of the device, and then the loop at line 1722 proceeds to overwrite it unless the value of i is set by the __b44_load_mcast call. However, when IFF_ALLMULTI is set, that call is bypassed, leaving i set to zero. Fixed by starting the loop at 1 to make it skip the CAM entry for the MAC address. Signed-off-by: Bill Helfinstine <bhelf@flitterfly.whirpon.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-03cxgb3 - Firwmare updateDivy Le Ray
Introduce FW micro version. Bump up FW version to 3.3.0 Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-03cxgb3 - Tighten xgmac workaroundDivy Le Ray
Run the watchdog task when the link is up. Flush the XGMAC Tx FIFO when the link drops. Also remove a statistics update that should have gone in the previous modification of xgmac.c. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 05:24:41 +0000