aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2006-05-06[IRDA] irda-usb: use NULL instead of 0Randy Dunlap
Use NULL instead of 0 for a null pointer value (sparse warning): drivers/net/irda/irda-usb.c:1781:30: warning: Using plain integer as NULL pointer Also, correct timeout argument to use milliseconds instead of jiffies. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-03[HAMRADIO]: Remove remaining SET_MODULE_OWNER calls from hamradio drivers.Ralf Baechle DL5RB
Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-02forcedeth: fix multi irq issuesAyaz Abdulla
This patch fixes the issues with multiple irqs. I am resending based on feedback. I decoupled the dma mask for consistent memory and fixed leak with multiple irq in error path. Thanks to Manfred for catching the spin lock problem. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com>
2006-05-02[PATCH] via-rhine: zero pad short packets on Rhine I ethernet cardsCraig Brind
Fixes Rhine I cards disclosing fragments of previously transmitted frames in new transmissions. Before transmission, any socket buffer (skb) shorter than the ethernet minimum length of 60 bytes was zero-padded. On Rhine I cards the data can later be copied into an aligned transmission buffer without copying this padding. This resulted in the transmission of the frame with the extra bytes beyond the provided content leaking the previous contents of this buffer on to the network. Now zero-padding is repeated in the local aligned buffer if one is used. Following a suggestion from the via-rhine maintainer, no attempt is made here to avoid the duplicated effort of padding the skb if it is known that an aligned buffer will definitely be used. This is to make the change "obviously correct" and allow it to be applied to a stable kernel if necessary. There is no change to the flow of control and the changes are only to the Rhine I code path. The patch has run on an in-service Rhine-I host without incident. Frames shorter than 60 bytes are now correctly zero-padded when captured on a separate host. I see no unusual stats reported by ifconfig, and no unusual log messages. Signed-off-by: Craig Brind <craigbrind@gmail.com> Signed-off-by: Roger Luethi <rl@hellgate.ch> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-02[PATCH] mv643xx_eth: provide sysfs class device symlinkOlaf Hering
On Sat, Mar 11, Olaf Hering wrote: > Why is the /sys/class/net/eth0/device symlink not created for the > mv643xx_eth driver? Does this work for other platform device drivers? > Seems to work for the ps2 keyboard at least. The SET_NETDEV_DEV has to be done before a call to register_netdev. With the new patch below, the device symlink for the platform device was created. Unfortunately, after the 4 ls commands, the network connection died. No idea if the box crashed or if something else broke, lost remote access. Provide sysfs 'device' in /class/net/ethN Also, set module owner field, like pcnet32 driver does. Signed-off-by: Olaf Hering <olh@suse.de> Acked-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-29[TG3]: Update version and reldateMichael Chan
Update version to 3.57. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-29[TG3]: Fix bug in nvram writeMichael Chan
Fix bug in nvram write function. If the starting nvram address offset happens to be the last dword of the page, the NVRAM_CMD_LAST bit will not get set in the existing code. This patch fixes the bug by changing the "else if" to "if" so that the last dword condition always gets checked. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-29[TG3]: Add reset_phy parameter to chip reset functionsGary Zambrano
Add a reset_phy parameter to tg3_reset_hw() and tg3_init_hw(). With the full chip reset during MAC address change, the automatic PHY reset during chip reset will cause a link down and bonding will not work properly as a result. With this reset_phy parameter, we can do a chip reset without link down when changing MAC address or MTU. Signed-off-by: Gary Zambrano <zambrano@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-29[TG3]: Reset chip when changing MAC addressMichael Chan
Do the full chip reset when changing MAC address if ASF is enabled. ASF sometimes uses a different MAC address than the driver. Without the reset, the ASF MAC address may be overwritten when the driver's MAC address is changed. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-29[TG3]: Add phy workaroundMichael Chan
Add some PHY workaround code to reduce jitter on some PHYs. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-29[TG3]: Call netif_carrier_off() during phy resetMichael Chan
Add netif_carrier_off() call during tg3_phy_reset(). This is needed to properly track the netif_carrier state in cases where we do a PHY reset with interrupts disabled. The SerDes code will not run properly if the netif_carrier state is wrong. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-26[PATCH] forcedeth: fix initializationAyaz Abdulla
This patch fixes the nic initialization. If the nic was in low power mode, it brings it back to normal power. Also, it utilizes a new hardware reset during the init. I am resending based on feedback, I corrected the register size mapping and delay after posted write. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-26[PATCH] sky2: version 1.2Stephen Hemminger
Update to version 1.2 Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-26[PATCH] sky2: reset function can be devinitStephen Hemminger
The sky2_reset function only called from sky2_probe. Maybe the compiler was smart enough to figure this out already. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-26[PATCH] sky2: use ALIGN() macroStephen Hemminger
The ALIGN() macro in kernel.h does the same math that the sky2 driver was using for padding. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-26[PATCH] sky2: add fake idle irq timerStephen Hemminger
Add an fake NAPI schedule once a second. This is an attempt to work around for broken configurations with edge-triggered interrupts. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-26[PATCH] sky2: reschedule if irq still pendingStephen Hemminger
This is a workaround for the case edge-triggered irq's. Several users seem to have broken configurations sharing edge-triggered irq's. To avoid losing IRQ's, reshedule if more work arrives. The changes to netdevice.h are to extract the part that puts device back in list into separate inline. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-26Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2006-04-26Merge branch 'skb_truesize' of ↵Jeff Garzik
git://lost.foo-projects.org/~ahkok/git/linux-2.6 into upstream-fixes
2006-04-26Merge branch 'master' into upstream-fixesJeff Garzik
2006-04-25e1000: Update truesize with the length of the packet for packet splitAuke Kok
Update skb with the real packet size. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com>
2006-04-24[PATCH] bcm43xx: make PIO mode usableMichael Buesch
This patch fixes PIO mode on the softmac bcm43xx driver. (A dscape patch will follow). It mainly fixes endianess issues. This patch is tested on PowerPC32 and i386. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-24[PATCH] Fix crash on big-endian systems during scanPavel Roskin
The original code was doing arithmetics on a little-endian value. Reported by Stelios Koroneos <stelios@stelioscellar.com> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-22[PATCH] pcmcia: add new ID to pcnet_csDominik Brodowski
This adds a new ID to pcnet_cs, as noted by Kuro Moji. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-04-20Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (21 commits) [PATCH] wext: Fix RtNetlink ENCODE security permissions [PATCH] bcm43xx: iw_priv_args names should be <16 characters [PATCH] bcm43xx: sysfs code cleanup [PATCH] bcm43xx: fix pctl slowclock limit calculation [PATCH] bcm43xx: fix dyn tssi2dbm memleak [PATCH] bcm43xx: fix config menu alignment [PATCH] bcm43xx wireless: fix printk format warnings [PATCH] softmac: report when scanning has finished [PATCH] softmac: fix event sending [PATCH] softmac: handle iw_mode properly [PATCH] softmac: dont send out packets while scanning [PATCH] softmac: return -EAGAIN from getscan while scanning [PATCH] bcm43xx: set trans_start on TX to prevent bogus timeouts [PATCH] orinoco: fix truncating commsquality RID with the latest Symbol firmware [PATCH] softmac: fix spinlock recursion on reassoc [PATCH] Revert NET_RADIO Kconfig title change [PATCH] wext: Fix IWENCODEEXT security permissions [PATCH] wireless/atmel: send WEXT scan completion events [PATCH] wireless/airo: clean up WEXT association and scan events [PATCH] softmac uses Wiress Ext. ...
2006-04-20[PATCH] Fix locking in gianfarAndy Fleming
This patch fixes several bugs in the gianfar driver, including a major one where spinlocks were horribly broken: * Split gianfar locks into two types: TX and RX * Made it so gfar_start() now clears RHALT * Fixed a bug where calling gfar_start_xmit() with interrupts off would corrupt the interrupt state * Fixed a bug where a frame could potentially arrive, and never be handled (if no more frames arrived * Fixed a bug where the rx_work_limit would never be observed by the rx completion code * Fixed a bug where the interrupt handlers were not actually protected by their spinlocks Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-20Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2006-04-20[PATCH] NEx000: fix RTL8019AS base address for RBTX4938Sergei Shtylyov
Correct the base address of the Realtek RTL8019AS chip on the Toshiba RBTX4938 board -- this should make the driver work at least when CONFIG_PCI is enabled. Signed-off-by: Yuri Shpilevsky <yshpilevsky@ru.mvista.com> Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-19[SUNGEM]: Marvell PHY suspend.Johannes Berg
In a short discussion with Benjamin Herrenschmidt he mentioned that Marvell PHYs are powered down the same way as the other ones we currently handle. Thus actually do that, hopefully saving some power during suspend. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-19[PATCH] bcm43xx: iw_priv_args names should be <16 charactersErik Mouw
The room for the names in bcm43xx_priv_wx_args[] are IFNAMSIZ long and IFNAMSIZ is defined as 16, so the names in bcm43xx_priv_wx_args should be 15 characters (16 including the trailing \0). This patch fixes that for the "set_shortpreambl", "get_shortpreambl", "set_swencryption", and "get_swencryption" private calls. Patch is against 2.6.17-rc1. Signed-off-by: Erik Mouw <erik@harddisk-recovery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-19[PATCH] bcm43xx: sysfs code cleanupMichael Buesch
This cleans up the bcm43xx sysfs code and makes it compliant with the unwritten sysfs rules (at least I hope so). Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-19[PATCH] bcm43xx: fix pctl slowclock limit calculationMichael Buesch
This fixes coverity bug: http://marc.theaimsgroup.com/?l=linux-netdev&m=114417628413880&w=2 Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-19[PATCH] bcm43xx: fix dyn tssi2dbm memleakAdrian Bunk
This patch fixes a memory leak spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-19[PATCH] bcm43xx: fix config menu alignmentRandy Dunlap
Use "depends on" to make all bcm43xx driver options be listed at the same level. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-19[PATCH] bcm43xx wireless: fix printk format warningsRandy Dunlap
Fix printk format warnings: drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c:456: warning: format ‘%u’ expects type ‘unsigned int’, but argument 3 has type ‘size_t’ drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c:460: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘size_t’ drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c:476: warning: format ‘%u’ expects type ‘unsigned int’, but argument 3 has type ‘size_t’ drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c:480: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘size_t’ drivers/net/wireless/bcm43xx/bcm43xx_dma.c:200: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘dma_addr_t’ drivers/net/wireless/bcm43xx/bcm43xx_dma.c:311: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘dma_addr_t’ drivers/net/wireless/bcm43xx/bcm43xx_dma.c:733: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘dma_addr_t’ Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-19[PATCH] bcm43xx: set trans_start on TX to prevent bogus timeoutsMichael Buesch
Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-19[PATCH] orinoco: fix truncating commsquality RID with the latest Symbol firmwarePavel Roskin
Symbol firmware F3.91-71 has an additional word in the commsquality RID. Extend the receiving buffer by one word to accomodate it. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-19[PATCH] Revert NET_RADIO Kconfig title changeJean Tourrilhes
2.6.17-rc1 changed the title for the entry CONFIG_NET_RADIO. I personally disagree with this change and want it reverted. Patch for 2.6.17-rc1. Rationale : WIRELESS_EXT is an invisible option. Therefore, the only way for a user to enable it is via NET_RADIO. Some users need to do that for out-of-tree drivers. Therefore it should be mentionned in the title of the option. Rationale2 : the option just below is called "Wireless Extension API over RtNetlink". Some users may confuse this option for the main "Wireless Extension" option. Therefore reverting this change help disambiguate the relation between those two options. Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-19[PATCH] wireless/atmel: send WEXT scan completion eventsDan Williams
Send scan completion events to user space when a scan completes. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-19[PATCH] wireless/airo: clean up WEXT association and scan eventsDan Williams
Airo firmware versions >= 5.30.17 send re-association events to the driver that are currently unrecognized, causing spurious disassociation events to be sent to user space. Loss of sync due to scan requests also results in disassociation events sent to user space. This patch traps those two events; suppressing sync-loss on scan, and sending the correct association event on re-association notifications. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-14[IRDA]: smsc-ircc2, smcinit support for ALi ISA bridgesLinus Walleij
From: Linus Walleij <triad@df.lth.se> This patch enables support for ALi ISA bridges when we run the smcinit code. It is needed to properly configure some Toshiba laptops. Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-14[IRDA]: irda-usb, unregister netdev when patch upload failsSamuel Ortiz
In the STIR421x case, when the firmware upload fails, we need to unregister_netdev. Otherwise we hit a BUG on free_netdev(), if sysfs is enabled. Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-12Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [PATCH] Use pci_set_consistent_dma_mask in ixgb driver [PATCH] sky2: bad memory reference on dual port cards [PATCH] mv643xx_eth: Fix tx_timeout to only conditionally wake tx queue [PATCH] mv643xx_eth: Always free completed tx descs on tx interrupt [PATCH] net drivers: fix section attributes for gcc [PATCH] remove drivers/net/hydra.h [PATCH] drivers/net/via-rhine.c: make a function static [netdrvr b44] trim trailing whitespace [PATCH] b44: increase version to 1.00 [PATCH] b44: disable default tx pause [PATCH] via-rhine: execute bounce buffers code on Rhine-I only [PATCH] network: axnet_cs.c: add missing 'PRIV' in ei_rx_overrun [PATCH] dlink pci cards using wrong driver
2006-04-12[PATCH] Use pci_set_consistent_dma_mask in ixgb driverAndreas Schwab
The ixgb driver is using pci_alloc_consistent, thus is should also use pci_set_consistent_dma_mask. This allows the driver to work on SGI systems. In case of an error during probing it should also disable the device again. Signed-off-by: Andreas Schwab <schwab@suse.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-12[PATCH] sky2: bad memory reference on dual port cardsStephen Hemminger
Sky2 driver will oops referencing bad memory if used on a dual port card. The problem is accessing past end of MIB counter space. Applies for both 2.6.17 and 2.6.16 (with fuzz) Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-12[PATCH] mv643xx_eth: Fix tx_timeout to only conditionally wake tx queueDale Farnsworth
After resetting the hardware on a tx_timeout, call netif_wake_queue() only if we have free tx descriptors. Also, attempt to recover if mv643xx_eth_start_xmit() is called when there are fewer free tx descriptors than expected. The BUG_ON() call we are replacing was hit on a tx_timeout that called netif_wake_queue(), indirectly via netif_device_attach(), even though we did not have enough free tx descriptors. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-12[PATCH] mv643xx_eth: Always free completed tx descs on tx interruptBrent Cook
Fix the tx interrupt handler to free completed tx descriptors even when NAPI is enabled. Otherwise, the tx queue would fill up resulting in poor performance and "NETDEV WATCHDOG: <iface>: transmit timed out" messages. Signed-off-by: Brent Cook <bcook@bpointsys.com> Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-12[PATCH] net drivers: fix section attributes for gccRandy Dunlap
If CONFIG_HOTPLUG=n, gcc doesn't like some __initdata to be const (rodata) and other __initdata not const, so make the non-const __initdata const. gcc errors: drivers/net/bnx2.c:66: error: version causes a section type conflict drivers/net/starfire.c:338: error: version causes a section type conflict drivers/net/typhoon.c:137: error: version causes a section type conflict drivers/net/natsemi.c:241: error: version causes a section type conflict Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-12[PATCH] remove drivers/net/hydra.hAdrian Bunk
Remove drivers/net/hydra.h which is both unused and covered by a 4 clause BSD licence (not by the UCB). Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-By: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-12[PATCH] drivers/net/via-rhine.c: make a function staticAdrian Bunk
Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Roger Luethi <rl@hellgate.ch> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>