aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2006-05-26[PATCH] pcnet32: remove incorrect pcnet32_free_ringDon Fry
During a code scan for another change I discovered that this call to pcnet32_free_ring must be removed. If the open fails due to a lack of memory all the ring structures are removed via the call to free_ring and a subsequent call to open will dereference a null pointer in pcnet32_init_ring. Please apply to 2.6.17. Signed-off-by: Don Fry <brazilnut@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-26e1000: add shutdown handler back to fix WOLAuke Kok
Someone was waaay too aggressive and removed e1000's reboot notifier instead of porting it to the new way of the shutdown handler. This change broke wake on lan. Add the shutdown handler back in using the same method as e100 uses. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> (cherry picked from c653e6351e371b33b29871e5eedf610ffb3be037 commit)
2006-05-26Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2006-05-26[PATCH] arlan: fix section mismatch warningsRandy Dunlap
Fix section mismatch warnings: WARNING: drivers/net/wireless/arlan.o - Section mismatch: reference to .init.text:arlan_probe from .text between 'init_module' (at offset 0x3526) and 'cleanup_module' WARNING: drivers/net/wireless/arlan.o - Section mismatch: reference to .init.text:init_arlan_proc from .text between 'init_module' (at offset 0x3539) and 'cleanup_module' WARNING: drivers/net/wireless/arlan.o - Section mismatch: reference to .exit.text:cleanup_arlan_proc from .text between 'cleanup_module' (at offset 0x356c) and 'arlan_diagnostic_info_string' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-05-26[PATCH] wavelan: fix section mismatchRandy Dunlap
Fix section mismatch warning: WARNING: drivers/net/wireless/wavelan.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x371e) and 'cleanup_module' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-05-25[IRDA]: *_DONGLE should depend on IRTTY_SIRSamuel Ortiz
If a SIR dongle is built in the kernel while IRTTY_SIR is built as a module, kernel compilation will fail. Thus, the SIR dongle config should depend on the IRTTY_SIR. Closes kernel bug# 6512 (http://bugzilla.kernel.org/show_bug.cgi?id=6512) Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-24[PATCH] sky2: fix jumbo packet supportStephen Hemminger
The truncate threshold calculation to prevent receiver from getting stuck was incorrect, and it didn't take into account the upper limit on bits in the register so the jumbo packet support was broken. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-23Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NETFILTER]: SNMP NAT: fix memory corruption [IRDA]: fixup type of ->lsap_state [IRDA]: fix 16/32 bit confusion [NET]: Fix "ntohl(ntohs" bugs [BNX2]: Use kmalloc instead of array [BNX2]: Fix bug in bnx2_nvram_write() [TG3]: Add some missing rx error counters
2006-05-23[PATCH] orinoco: possible null pointer dereference in orinoco_rx_monitor()Florin Malita
If the skb allocation fails, the current error path calls dev_kfree_skb_irq() with a NULL argument. Also, 'err' is not being used. Coverity CID: 275. Signed-off-by: Florin Malita <fmalita@gmail.com> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-22[BNX2]: Use kmalloc instead of arrayMichael Chan
Use kmalloc() instead of a local array in bnx2_nvram_write(). Update version to 1.4.40. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-22[BNX2]: Fix bug in bnx2_nvram_write()Michael Chan
Fix a bug in bnx2_nvram_write() caused by a counter variable not correctly incremented by 4. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-22[TG3]: Add some missing rx error countersMichael Chan
Add some missing rx error counters for 5705 and newer chips. Update version to 3.58. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-21[PATCH] forcedeth: fix multi irq issuesAyaz Abdulla
With Manfred Spraul <manfred@colorfullife.com> and Andrew Morton <akpm@osdl.org> Bring back this recently-reverted patch, only fixed. Original changelog: From: Ayaz Abdulla <aabdulla@nvidia.com> This patch fixes the issues with multiple irqs. I am resending based on feedback. I decoupled the dma mask for consistent memory and fixed leak with multiple irq in error path. Thanks to Manfred for catching the spin lock problem. Fix it: From: Manfred Spraul <manfred@colorfullife.com> Fix bug introduced by ebf34c9b6fcd22338ef764b039b3ac55ed0e297b, covered in http://bugzilla.kernel.org/show_bug.cgi?id=6568. Remove second instance of the request_irq() calls: they were moved from nv_open into nv_request_irq. Thanks to Alistair Strachan <alistair@devzero.co.uk> for reporting and persisting. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-20[PATCH] winbond-840-remove-badness-in-pci_map_singleErling A. Jacobsen
Call pci_map_single() with the actual size of the receive buffers, not 0 (which skb->len is initialized to by dev_alloc_skb()). Signed-off-by: Erling A. Jacobsen <linuxcub@email.dk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-20[PATCH] network: axnet_cs: bug fix multicast code (support older ax88190 ↵Komuro
chipset) Dear Jeff axnet_cs: bug fix multicast code (support older ax88190 chipset) Signed-off-by: komurojun-mbn@nifty.com Best Regards Komuro Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-20[PATCH] skge: don't allow transmit ring to be too smallStephen Hemminger
The driver will get stuck (permanent transmit timeout), if the transmit ring size is set too small. It needs to have enough ring elements to hold one maximum size transmit. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-20[PATCH] skge: bad checksums on big-endian platformsStephen Hemminger
Skge driver always causes bad checksums on big-endian. The checksum in the receive control block was being swapped when it doesn't need to be. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-20Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2006-05-20[PATCH] sky2 version 1.4Stephen Hemminger
Need to track impact of this group of changes. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-20[PATCH] sky2: force NAPI repoll if busyStephen Hemminger
If the status ring processing can't keep up with the incoming frames, it is more efficient to have NAPI keep scheduling the poll routine rather than causing another interrupt. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-20[PATCH] sky2: more fixes for Yukon UltraStephen Hemminger
Logic error in the phy initialization code. Also, turn on wake on lan bit in status control. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-20[PATCH] Subjec: sky2, skge: correct PCI id for DGE-560TStephen Hemminger
The Dlink DGE-560T uses Yukon2 chipset so it needs sky2 driver; and the DGE-530T uses Yukon1 so it uses skge driver. Bug: http://bugzilla.kernel.org/show_bug.cgi?id=6544 Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-20[PATCH] sky2: allow dual port usageStephen Hemminger
If both ports are receiving on the SysKonnect dual port cards, then it appears the bus interface unit can give an interrupt status for frame before DMA has completed. This leads to bogus frames and general confusion. This is why receive checksumming is also messed up on dual port cards. A workaround for the out of order receive problem is to eliminating split transactions on PCI-X. This version is based of the current linux-2.6.git including earlier patch to disable dual ports. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-20[PATCH] via-rhine: revert "change mdelay to msleep and remove from ISR path"John W. Linville
Revert previous patch with subject "change mdelay to msleep and remove from ISR path". This patch seems to have caused bigger problems than it solved, and it didn't solve much of a problem to begin with... Discussion about backing-out this patch can be found here: http://marc.theaimsgroup.com/?l=linux-netdev&m=114321570402396&w=2 The git commit associated w/ the original patch is: 6ba98d311d0a4ff7dc36d8f435ce60174f4c30ec Signed-off-by: John W. Linville <linville@tuxdriver.com Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-20[PATCH] revert "forcedeth: fix multi irq issues"Andrew Morton
Revert ebf34c9b6fcd22338ef764b039b3ac55ed0e297b. Maybe. Due to crashes at shutdown - see http://bugzilla.kernel.org/show_bug.cgi?id=6568. Cc: Ayaz Abdulla <aabdulla@nvidia.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/shemminger/netdev-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/shemminger/netdev-2.6: sky2: prevent dual port receiver problems x86_64: Check for bad dma address in b44 1GB DMA workaround The ixp2000 driver for the enp2611 was developed on a board with
2006-05-17[PATCH] bcm43xx: associate on 'ifconfig up'David Woodhouse
I still need this hack to work around the fact that softmac doesn't attempt to associate when we bring the device up... Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-05-16[PATCH] x86_64: Check for bad dma address in b44 1GB DMA workaroundAndi Kleen
Needed for interaction with the nommu code in x86-64 which will return bad_dma_address if the address exceeds dma_mask. Cc: netdev@vger.kernel.org Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-15sky2: prevent dual port receiver problemsStephen Hemminger
When both ports are receiving simultaneously, the receive logic gets confused and may pass up a packet before it is full. This causes hangs, and IP will see lots of garbage packets. There is even the potential for data corruption if a later arriving packet DMA's into freed memory. It looks like a hardware bug because status arrives for a packet but no data is there. Until this bug is worked out, block the user from bringing up both ports at once. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-05-15x86_64: Check for bad dma address in b44 1GB DMA workaroundAndi Kleen
Needed for interaction with the nommu code in x86-64 which will return bad_dma_address if the address exceeds dma_mask. Cc: netdev@vger.kernel.org Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-05-15The ixp2000 driver for the enp2611 was developed on a board withLennert Buytenhek
three gigabit ports, but some enp2611 models only have two ports (and only one onboard PM3386.) The current driver assumes there are always three ports and so it doesn't work on the two-port version of the board at all. This patch adds a bit of logic to the enp2611 driver to limit the number of ports to 2 if the second PM3386 isn't detected. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-05-15[PATCH] dl2k needs dma-mapping.hAndrew Morton
On alpha: drivers/net/dl2k.c: In function `rio_free_tx': drivers/net/dl2k.c:768: error: `DMA_48BIT_MASK' undeclared (first use in this function) drivers/net/dl2k.c:768: error: (Each undeclared identifier is reported only once drivers/net/dl2k.c:768: error: for each function it appears in.) drivers/net/dl2k.c: In function `receive_packet': drivers/net/dl2k.c:896: error: `DMA_48BIT_MASK' undeclared (first use in this function) drivers/net/dl2k.c: In function `rio_close': drivers/net/dl2k.c:1803: error: `DMA_48BIT_MASK' undeclared (first use in this function) Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-12[TG3]: ethtool always report port is TP.Karsten Keil
Even with fiber cards ethtool reports that the connected port is TP, the patch fix this. Signed-off-by: Karsten Keil <kkeil@suse.de> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-11Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NET_SCHED]: HFSC: fix thinko in hfsc_adjust_levels() [IPV6]: skb leakage in inet6_csk_xmit [BRIDGE]: Do sysfs registration inside rtnl. [NET]: Do sysfs registration as part of register_netdevice. [TG3]: Fix possible NULL deref in tg3_run_loopback(). [NET] linkwatch: Handle jiffies wrap-around [IRDA]: Switching to a workqueue for the SIR work [IRDA]: smsc-ircc: Minimal hotplug support. [IRDA]: Removing unused EXPORT_SYMBOLs [IRDA]: New maintainer. [NET]: Make netdev_chain a raw notifier. [IPV4]: ip_options_fragment() has no effect on fragmentation [NET]: Add missing operstates documentation.
2006-05-10Merge branch 'upstream' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/shemminger/netdev-2.6 * 'upstream' of master.kernel.org:/pub/scm/linux/kernel/git/shemminger/netdev-2.6: sis900: phy for FoxCon motherboard dl2k: use DMA_48BIT_MASK constant phy: mdiobus_register(): initialize all phy_map entries sky2: ifdown kills irq mask
2006-05-10sis900: phy for FoxCon motherboardJames Cameron
661FX7MI-S motherboard which uses the SiS 661FX chipset. The patch adds an entry to mii_chip_info for the transceiver. The PHY ids were found using the sis900_c_122.diff patch from http://brownhat.org/sis900.html but that patch didn't solve the problem, because the PHY at address 1 was already being chosen. Without my patch, when bursts of packets arrive from other hosts on a LAN, the interface dropped one roughly 10% of the time, causing retransmits. There were fifth second pauses in refresh of large xterms, and it made Netrek suck. I can provide further test data. Workaround in lieu of patch is to use mii-tool to advertise 100baseTx-HD, then force renegotiation. I wasn't able to identify the actual transceiver, so the description field is a guess. This patch is similar to Artur Skawina's patch: http://marc.theaimsgroup.com/?l=linux-netdev&m=114297516729079&w=2 I'm not sure, but I wonder if it means the default behaviour should be changed, so as to better handle future transceivers. Diff is against 2.6.16.13. Signed-off-by: James Cameron <james.cameron@hp.com> Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-05-10dl2k: use DMA_48BIT_MASK constantFrancois Romieu
Typo will be harder with this one. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-05-10phy: mdiobus_register(): initialize all phy_map entriesHerbert Valerio Riedel
make sure phy_map entries whose PHY address is masked are initialized to NULL, given that other code (such as mdiobus_unregister for instance) assumes that non-NULL phy_map entries are allocated phy_devices Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org> Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-05-10sky2: ifdown kills irq maskStephen Hemminger
Bringing down a port also masks off the status and other IRQ's needed for device to function due to missing paren's. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-05-09[TG3]: Fix possible NULL deref in tg3_run_loopback().Jesper Juhl
tg3_run_loopback doesn't check that dev_alloc_skb() returns anything useful. Even if dev_alloc_skb() fails to return an skb to us we'll happily go on and assume it did, so we risk dereferencing a NULL pointer. Much better to fail gracefully by returning -ENOMEM than crashing here. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-09[IRDA]: Switching to a workqueue for the SIR workChristoph Hellwig
Since sir_kthread.c pretty much duplicates the workqueue functionality, we'd better switch. The SIR fsm has been merged into sir_dev.c and thus sir_kthread.c is deleted. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-09[IRDA]: smsc-ircc: Minimal hotplug support.David Brownell
Minimal PNP hotplug support for the smsc-ircc2 driver. A modular driver will be modprobed via hotplug, but still bypasses driver model probing. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-08Merge branch 'upstream-fixes' of ↵Stephen Hemminger
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2006-05-08spidernet: enable support for bcm5461 ethernet phyJens Osterkamp
A newer board revision changed the type of ethernet phy. Moreover, this generalizes the way that a phy gets switched into fiber mode when autodetection is not available. Signed-off-by: Jens Osterkamp <Jens.Osterkamp@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-05-08spidernet: introduce new settingJens Osterkamp
We found a new chip setting that we need in order to make the driver work more reliable. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-05-08Fix RTL8019AS init for Toshiba RBTX49xx boardsSergei Shtylyov
Ensure that 8-bit mode is selected for the on-board Realtek RTL8019AS chip on Toshiba RBHMA4x00, get rid of the duplicate #ifdef's when setting ei_status.word16. The chip's datasheet says that the PSTOP register shouldn't exceed 0x60 in 8-bit mode -- ensure this too. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-05-08au1000_eth.c: use ether_crc() from <linux/crc32.h>Herbert Valerio Riedel
since the au1000 driver already selects the CRC32 routines, simply replace the internal ether_crc() implementation with the semantically equivalent one from <linux/crc32.h> Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org> Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-05-08sky2: version 1.3Stephen Hemminger
Update version number, to track changes. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-05-08Add more support for the Yukon Ultra chip found in dual core centino laptops.Stephen Hemminger
The newest Yukon Ultra chipset's require more special tweaks. They seem to be like the Yukon XL chipsets. This code is transliterated from the latest SysKonnect driver; I don't have any Ultra hardware. Signed-off-by: Stephe Hemminger <shemminger@osdl.org> Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-05-08sky2: synchronize irq on removeStephen Hemminger
Need to make sure interrupt is not racing with unregister of network device. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 11:43:26 +0000