aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2009-02-12bnx2: Update version to 1.9.2 and copyright.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12bnx2: Fix jumbo frames error handling.Michael Chan
If errors are reported on a frame descriptor, we need to account for the buffer pages that may have been used for this error packet and recycle them. Otherwise, we may get the wrong pages for the next packet. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12bnx2: Update 5709 firmware.Michael Chan
New firmware fixes a data corruption issue when receiving and placing jumbo frames into host buffers. In some cases, the buffer descriptor is not updated correctly and this will lead to the driver linking the wrong number of pages into the SKB. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12bnx2: Update 5706/5708 firmware.Michael Chan
New firmware fixes a data corruption issue when receiving and placing jumbo frames into host buffers. In some cases, the buffer descriptor is not updated correctly and this will lead to the driver linking the wrong number of pages into the SKB. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-123c505: do not set pcb->data.raw beyond its sizeRoel Kluin
Ensure that we do not set pcb->data.raw beyond its size, print an error message and return false if we attempt to. A timout message was printed one too early. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12IRDA: cnt is off by 1Roel Kluin
If no prior break occurs, cnt reaches 101 after the loop, so we are still able to change speed when cnt has become 100. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12netxen: remove pcie workaroundDhananjay Phadke
Remove workaround for pcie bug in early revisions of NX3031 (rev 41 or earlier). This is taken care of during firmware init. The workaround required writing pcie config reg of every pcie function on a card, not all of which are enabled. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12sun3: print when lance_open() failsRoel Kluin
With while (--i > 0) { ... } i reaches 0; print when lance_open() fails Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12qlge: bugfix: Add missing rx buf clean index on early exit.Ron Mercer
The large receive buffer queue is not properly tracking the current index in the case where an early exit occurs. This can happen when a page alloc or dma mapping fails. If this occurs the queue will get out of sync and invalid indexes can be written to the hardware. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12qlge: bugfix: Fix RX scaling values.Ron Mercer
Receive packets were only scaling across 2 of the receive queues. The value was hardcoded to 2 instead of being based on how many rx queues were running. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12qlge: bugfix: Fix TSO breakage.Ron Mercer
Moved the buffer mapping to a point after TSO logic has modified the iph->check field. We were seeing stale data on the PCIe bus. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12qlge: bugfix: Add missing dev_kfree_skb_any() call.Ron Mercer
We put the skb back if we can't get mapping for it. We don't want unmapped buffers on our receive buffer queue. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12qlge: bugfix: Add missing put_page() call.Ron Mercer
We put the page back if we can't get mapping for it. We don't want unmapped buffers on our receive buffer queue. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12qlge: bugfix: Fix fatal error recovery hang.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12qlge: bugfix: Use netif_receive_skb() and vlan_hwaccel_receive_skb().Ron Mercer
Replace calls to vlan_hwaccel_rx() and netif_rx(). Thanks to Dave Miller for pointing out the the driver was making the wrong upcall for passing packets into the stack. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12TG3: limit reaches -1Roel Kluin
With while (limit--) { ... } limit reaches -1, so 0 means success. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-11iwlwifi: fix suspend/resume and its usage of pci saved stateReinette Chatre
Here we do two things: First, revert "iwlwifi: save PCI state before suspend, restore after resume". That misguided patch led to being unable to use iwlwifi devices after resume. Next, indicate to PCI driver that the saved PCI state is valid during suspend. We restore PCI state and enable the device when network interface is created, similarly PCI state is saved and the device is disabled when network interface is removed. Thus, when .suspend is called the PCI state is saved and device is disabled. This is the case even if an interface is never created as PCI state is saved and device disabled during .probe. PCI driver assumes PCI state is saved in .suspend. Saving the state at this time will save state of disabled device and thus cause problems during resume (resuming a disabled device). We thus indicate directly to PCI driver that current PCI saved state is valid. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Tested-by: Alex Riesen <fork0@users.sf.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-11zd1211rw: treat MAXIM_NEW_RF(0x08) as UW2453_RF(0x09) for TP-Link WN322/422GHin-Tak Leung
Three people (Petr Mensik <pihhan@cipis.net> ["si" should be U+0161 U+00ED], Stephen Ho <stephenhoinhk@gmail.com> on zd1211-devs and Ismael Ojeda Perez <iojedaperez@gmail.com> on linux-wireless) reported success in getting TP-Link WN322G/WN422G working by treating MAXIM_NEW_RF(0x08) as UW2453_RF(0x09) for rf chip hardware initialization. Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Tested-by: Petr Mensik <pihhan@cipis.net> Tested-by: Stephen Ho <stephenhoinhk@gmail.com> Tested-by: Ismael Ojeda Perez <iojedaperez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-11zd1211rw: adding 0ace:0xa211 as a ZD1211 deviceHin-Tak Leung
Christoph Biedl <sourceforge.bnwi@manchmal.in-ulm.de> reported success in the sourceforge zd1211 mailing list on this addition. This product ID was supported by the vendor driver ZD1211LnxDrv 2.22.0.0 (and possibly earlier) and it probably should have been added earlier. Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Tested-by: Christoph Biedl <sourceforge.bnwi@manchmal.in-ulm.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-11ath5k: fix bf->skb==NULL panic in ath5k_tasklet_rxBob Copeland
Under memory pressure, we may not be able to allocate a new skb for new packets. If the allocation fails, ath5k_tasklet_rx will exit but will leave a buffer in the list with a NULL skb, eventually triggering a BUG_ON. Extract the skb allocation from ath5k_rxbuf_setup() and change the tasklet to allocate the next skb before accepting a packet. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-10sunhme: Fix Quattro HME irq registration on proble failuresMeelis Roos
Currently, the sunhme driver installs SBus Quattro interrupt handler when at least one HME card was initialized correctly and at least one Quattro card is present. This breaks when a Quattro card fails initialization for whatever reason - IRQ is registered and OOPS happens when it fires. The solution, as suggested by David Miller, was to keep track which cards of the Quattro bundles have been initialized, and request/free the Quattro IRQ only when all four devices have been successfully initialized. The patch only touches SBus initialization - PCI init already resets the card pointer to NULL on init failure. The patch has been tested on Sun E3500 with SBus and PCI single HME cards and one PCI Quattro HME card in a situation where any PCI card failed init when the SBus routines tried to init them by mistake. Additionally it replaces Quattro request_irq panic with error return - if this card fails to work, at least let the others work. Tested on E450 with PCI HME and PCI Quad HME. [ Minor coding style fixups -DaveM ] Signed-off-by: Meelis Roos <mroos@linux.ee> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-10mdio-gpio: Add mdc pin direction initializationPaulius Zaleckas
mdc pin should always be output. Initialize it as output, so each board code does not need to do this. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-09gianfar: Fix boot hangs while bringing up gianfar ethernetJarek Poplawski
Ira Snyder found that commit 8c7396aebb68994c0519e438eecdf4d5fa9c7844 "gianfar: Merge Tx and Rx interrupt for scheduling clean up ring" can cause hangs. It's because there was removed clearing of interrupts in gfar_schedule_cleanup() (which is called by an interrupt handler) in case when netif scheduling has been disabled. This patch brings back this action and a comment. Reported-by: Ira Snyder <iws@ovro.caltech.edu> Reported-by: Peter Korsgaard <jacmet@sunsite.dk> Bisected-by: Ira Snyder <iws@ovro.caltech.edu> Tested-by: Peter Korsgaard <jacmet@sunsite.dk> Tested-by: Ira Snyder <iws@ovro.caltech.edu> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-08netxen: fix msi-x interrupt handlingDhananjay Phadke
o Cut down msi-x vectors from 8 to 1 since only one is used for now. o Use separate handler for msi-x, that doesn't unnecessarily scrub msi status register. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-08de2104x: force correct order when writing to rx ringRisto Suominen
DescOwn should not be set, thus allowing the chip to use the descriptor, before everything else is set up correctly. Signed-off-by: Risto Suominen <Risto.Suominen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-08tun: Fix unicast filter overflowAlex Williamson
Tap devices can make use of a small MAC filter set via the TUNSETTXFILTER ioctl. The filter has a set of exact matches plus a hash for imperfect filtering of additional multicast addresses. The current code is unbalanced, adding unicast addresses to the multicast hash, but only checking the hash against multicast addresses. This results in the filter dropping unicast addresses that overflow the exact filter. The fix is simply to disable the filter by leaving count set to zero if we find non-multicast addresses after the exact match table is filled. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-07sunhme: Don't match PCI devices in SBUS probe.David S. Miller
Unfortunately, the OF device tree nodes for SBUS and PCI hme devices have the same device node name on some systems. So if the name of the parent node isn't 'sbus', skip it. Based upon an excellent report and detective work by Meelis Roos and Eric Brower. Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Meelis Roos <mroos@linux.ee>
2009-02-063c509: Fix resume from hibernation for PnP mode.Ondrej Zary
From: Ondrej Zary <linux@rainbow-software.org> last year, I posted a patch which fixed hibernation on 3c509 cards. That was back in 2.6.24. It worked fine in 2.6.25. But then I stopped using hibernation (as it did not work with my new IT8212 RAID controller). Now I fixed it and noticed that 3c509 does not wake up properly anymore (in 2.6.28) - neither in PnP nor in ISA modes. ifconfig down/up makes the card work again in PnP mode. However, in ISA mode, ifconfig up ends with "No such device" error. Comparing the 3c509 driver between 2.6.25 and 2.6.28, there's only some statistics-related change. So the cause of the problem must be somewhere else. This patch makes the resume work in PnP mode, but it's still not enough for ISA mode. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-06sungem: Soft lockup in sungem on Netra AC200 when switching interface upIlkka Virta
From: Ilkka Virta <itvirta@iki.fi> In the lockup situation the driver seems to go off in an eternal storm of interrupts right after calling request_irq(). It doesn't actually do anything interesting in the interrupt handler. Since connecting the link afterwards works, something later in initialization must fix this. Looking at gem_do_start() and gem_open(), it seems that the only thing done while opening the device after the request_irq(), is a call to napi_enable(). I don't know what the ordering requirements are for the initialization, but I boldly tried to move the napi_enable() call inside gem_do_start() before the link state is checked and interrupts subsequently enabled, and it seems to work for me. Doesn't even break anything too obvious... Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-06r8169: Don't update statistics counters when interface is downIvan Vecera
Some Realtek chips (RTL8169sb/8110sb in my case) are unable to retrieve ethtool statistics when the interface is down. The process stays in endless loop in rtl8169_get_ethtool_stats. This is because these chips need to have receiver enabled (CmdRxEnb bit in ChipCmd register) that is cleared when the interface is going down. It's better to update statistics only when the interface is up and otherwise return copy of statistics grabbed when the interface was up (in rtl8169_close). It is interesting that PCI-E NICs (like 8168b/8111b...) are not affected. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-05Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-02-04gianfar: Fix potential soft reset raceAndy Fleming
SOFT_RESET must be asserted for at least 3 TX clocks in order for it to work properly. The syncs in the gfar_write() commands have been hiding this, but we need to guarantee it. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-04gianfar: Fix BD_LENGTH_MASK definitionAndy Fleming
BD_LENGTH_MASK is supposed to catch the low 16-bits of the status field, not the low byte. The old way, we would never be able to clean up tx packets with sizes divisible by 256. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-04cxgb3: Fix lro switchDivy Le Ray
The LRO switch is always set to 1 in the rx processing loop. It breaks the accelerated iSCSI receive traffic. Fix its computation. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-04iwlwifi: save PCI state before suspend, restore after resumeReinette Chatre
This is the right thing to do and fixes the following warning: [ 115.012278] ------------[ cut here ]------------ [ 115.012281] WARNING: at drivers/pci/pci-driver.c:370 pci_legacy_suspend+0x85/0xc2() [ 115.012285] Hardware name: Latitude D630 [ 115.012301] PCI PM: Device state not saved by iwl3945_pci_suspend+0x0/0x4c [iwl3945] [ 115.012304] Modules linked in: fuse nfsd lockd nfs_acl auth_rpcgss exportfs sunrpc ipv6 acpi_cpufreq kvm_intel kvm snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep arc4 snd_seq_device snd_pcm_oss snd_mixer_oss ecb snd_pcm cryptomgr aead snd_timer crypto_blkcipher snd snd_page_alloc ohci1394 crypto_hash crypto_algapi ch341 ieee1394 usbserial thermal iwl3945 mac80211 led_class lib80211 tg3 processor i2c_i801 i2c_core sg cfg80211 libphy usbhid battery ac button sr_mod cdrom evdev dcdbas ata_generic ata_piix libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd usbcore [last unloaded: microcode] [ 115.012374] Pid: 4163, comm: pm-suspend Not tainted 2.6.29-rc3-00227-gf1dd849-dirty #67 [ 115.012377] Call Trace: [ 115.012382] [<ffffffff8023d04d>] warn_slowpath+0xb1/0xed [ 115.012387] [<ffffffff80450b5e>] ? _spin_unlock_irqrestore+0x5c/0x78 [ 115.012390] [<ffffffff80254f08>] ? up+0x34/0x39 [ 115.012394] [<ffffffff80362319>] ? acpi_ut_release_mutex+0x5d/0x61 [ 115.012397] [<ffffffff803584b2>] ? acpi_get_data+0x5e/0x70 [ 115.012400] [<ffffffff80363dd9>] ? acpi_bus_get_device+0x25/0x39 [ 115.012403] [<ffffffff80363e98>] ? acpi_bus_power_manageable+0x11/0x29 [ 115.012406] [<ffffffff803462f7>] ? acpi_pci_power_manageable+0x17/0x19 [ 115.012410] [<ffffffff8033ddfd>] ? pci_set_power_state+0xcc/0x101 [ 115.012418] [<ffffffffa01f28e9>] ? iwl3945_pci_suspend+0x0/0x4c [iwl3945] [ 115.012422] [<ffffffff803401e6>] pci_legacy_suspend+0x85/0xc2 [ 115.012425] [<ffffffff80340316>] pci_pm_suspend+0x34/0x86 [ 115.012429] [<ffffffff8039d7ce>] pm_op+0x52/0xe5 [ 115.012432] [<ffffffff8039dd78>] device_suspend+0x32a/0x451 [ 115.012436] [<ffffffff80269ec2>] suspend_devices_and_enter+0x3e/0x13a [ 115.012439] [<ffffffff8026a128>] enter_state+0x110/0x164 [ 115.012442] [<ffffffff8026a233>] state_store+0xb7/0xd7 [ 115.012446] [<ffffffff8032f95f>] kobj_attr_store+0x17/0x19 [ 115.012449] [<ffffffff80307d64>] sysfs_write_file+0xe4/0x119 [ 115.012453] [<ffffffff802baa7a>] vfs_write+0xae/0x137 [ 115.012456] [<ffffffff802babc7>] sys_write+0x47/0x70 [ 115.012459] [<ffffffff8020b73a>] system_call_fastpath+0x16/0x1b [ 115.012467] ---[ end trace 829828966f6f24dc ]--- Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Tested-by: Ming Lei <tom.leiming@gmail.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-04iwlwifi: clean key table in iwl_clear_stations_tableReinette Chatre
Cleans uCode key table bit map iwl_clear_stations_table since all stations are cleared also the key table must be. Since the keys are not removed properly on suspend by mac80211 this may result in exhausting key table on resume leading to memory corruption during removal Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-03e1000: Fix PCI enable to honor the need_ioport flagKarsten Keil
On machine were no IO ports are assigned the call to pci_enable_device() will fail, even if need_ioport is false, we need to use pci_enable_device_mem() here. Signed-off-by: Karsten Keil <kkeil@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-03pcnet_cs: Fix misuse of the equality operator.Cord Walter
Signed-off-by: Cord Walter <qord@cwalter.net> Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-03hso: add new device id'sFilip Aben
This patch adds a few device ID's. It also removes an ID that was used in an internal engineering version of a device and will never see commercial light. Even if this ID will be 'recycled' in the future, which is very unlikely, we don't know what kind of device will be behind it. Therefore it's safer to remove it. Signed-off-by: Filip Aben <f.aben@option.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-02Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
2009-02-02cassini/sungem: limit reaches -1, but 0 testedRoel Kluin
while (limit--) if (test()) break; if (limit <= 0) goto test_failed; In the last iteration, limit is decremented after the test to 0. If just thereafter test() succeeds and a break occurs, the goto still occurs because limit is 0. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-02net: variables reach -1, but 0 testedRoel Kluin
while (timeout--) { ... } timeout becomes -1 if the loop isn't ended otherwise, not 0. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-02Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: fbdev/atyfb: Fix DSP config on some PowerMacs & PowerBooks powerpc: Fix oops on some machines due to incorrect pr_debug() powerpc/ps3: Printing fixups for l64 to ll64 convserion drivers/net powerpc/5200: update device tree binding documentation powerpc/5200: Bugfix for PCI mapping of memory and IMMR powerpc/5200: update defconfigs
2009-02-02qlge: bugfix: Add missing netif_napi_del call.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-02qlge: bugfix: Add flash offset for second port.Ron Mercer
Without this the 2nd port gets first ports MAC addr. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-02qlge: bugfix: Fix endian issue when reading flash.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-02powerpc/ps3: Printing fixups for l64 to ll64 convserion drivers/netStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: igb: fix link reporting when using sgmii igb: prevent skb_over panic w/ mtu smaller than 1K igb: Fix DCA errors and do not use context index for 82576 ipv6: compile fix for ip6mr.c packet: Avoid lock_sock in mmap handler sfc: Replace stats_enabled flag with a disable count sfc: SFX7101/SFT9001: Fix AN advertisements sfc: SFT9001: Always enable XNP exchange on SFT9001 rev B sfc: Update board info for hardware monitor on SFN4111T-R5 and later sfc: Test for PHYXS faults whenever we cannot test link state bits sfc: Reinitialise the PHY completely in case of a PHY or NIC reset sfc: Fix post-reset MAC selection sfc: SFN4111T: Fix GPIO sharing between I2C and FLASH_CFG_1 sfc: SFT9001: Fix speed reporting in 1G PHY loopback sfc: SFX7101: Remove workaround for bad link training sfc: SFT9001: Enable robust link training sky2: fix hard hang with netconsoling and iface going up
2009-01-31igb: fix link reporting when using sgmiiAlexander Duyck
When using sgmii the link was not being properly passed up to the driver from the underlying link management functions. This change corrects it so that get_link_status is cleared when a link has been found. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-31igb: prevent skb_over panic w/ mtu smaller than 1KAlexander Duyck
A panic has been observed with frame sizes smaller than 1K. This has been root caused to the hardware spanning larger frames across multiple buffers and then reporting the original frame size in the first descriptor. To prevent this we can enable set the LPE bit which in turn will restrict packet sizes to those set in the RLPML register. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 20:04:21 +0000