aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2006-06-17[IRDA]: Initial support for MCS7780 based donglesSamuel Ortiz
The MosChip MCS7780 chipset is an IrDA USB bridge that doesn't conform with the IrDA-USB standard and thus needs its separate driver. Tested on an actual MCS7780 based dongle. Original implementation by Brian Pugh <bpugh@cs.pdx.edu> Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[PATCH] sky2: netconsole suspend/resume interactionStephen Hemminger
A couple of fixes that should prevent crashes when using netconsole and suspend/resume. First, netconsole poll routine shouldn't run unless the device is up; second, the NAPI poll should be disabled during suspend. This is only an issue on sky2, because it has to have one NAPI poll routine for both ports on dual port boards. Normal drivers use netif_rx_schedule_prep and that checks for netif_running. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-13[PATCH] sky2: stop/start hardware idle timer on suspend/resumeStephen Hemminger
The resume bug was caused not by an early interrupt but because the idle timeout was not being stopped on suspend. Also disable hardware IRQ's on suspend. Will need to revisit this with hotplug? Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-13[PATCH] sky2: save/restore base hardware irq during suspend/resumeStephen Hemminger
The hardware should be fully shut off during suspend, and the base irq mask restored during resume. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-13[PATCH] sky2: fix hotplug detect during pollStephen Hemminger
If the poll routine detects no hardware available, it needs to dequeue it self from the network poll list. Linus didn't understand NAPI. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-13[PATCH] sky2: don't hard code number of portsStephen Hemminger
It is cleaner, to not loop over both ports if only one exists. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-13[PATCH] sky2: set_power_state should be voidStephen Hemminger
The set power state function is cleaner if it doesn't return anything. The only caller that could fail is in suspend() and it can check the argument there. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-12[sky2] Fix sky2 network driver suspend/resumeLinus Torvalds
This fixes two independent problems: it would not save the PCI state on suspend (and thus try to resume a nonexistent state on resume), and while shut off, if an interrupt happened on the same shared irq, the irq handler would react very badly to the interrupt status being an invalid all-ones state. Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-09[TG3]: Handle Sun onboard tg3 chips more correctly.David S. Miller
Get rid of all the SUN_570X logic and instead: 1) Make sure MEMARB_ENABLE is set when we probe the SRAM for config information. If that is off we will get timeouts. 2) Always try to sync with the firmware, if there is no firmware running do not treat it as an error and instead just report it the first time we notice this condition. 3) If there is no valid SRAM signature, assume the device is onboard by setting TG3_FLAG_EEPROM_WRITE_PROT. Update driver version and release date. With help from Michael Chan and Fabio Massimo Di Nitto. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-08Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://lost.foo-projects.org/~ahkok/git/netdev-2.6 into upstream-fixes
2006-06-08Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2006-06-08e1000: remove risky prefetch on next_skb->dataAuke Kok
It was brought to our attention that the prefetches break e1000 traffic on xscale/arm architectures. Remove them for now. We'll let them stay in mm for a while, or find a better solution to enable. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-08e1000: fix ethtool test irq alloc as "probe"Auke Kok
New code added in 2.6.17 caused setup_irq to print a warning when running ethtool -t eth0 offline. This test marks the request_irq call made by this test as a "probe" to see if the interrupt is shared or not. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-05[PPPOE]: Missing result check in __pppoe_xmit().Florin Malita
skb_clone() may fail, we should check the result. Coverity CID: 1215. Signed-off-by: Florin Malita <fmalita@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-05[NETCONSOLE]: Clean up initcall warning.Matt Mackall
From: Matt Mackall <mpm@selenic.com> netconsole is being wrong here. If it wasn't enabled there's no error. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-05[PATCH] Implement get / set tso for forcedeth driverZachary Amsden
From: Zachary Amsden <zach@vmware.com> Signed-off-by: Zachary Amsden <zach@vmware.com> Cc: Ayaz Abdulla <aabdulla@nvidia.com> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-05[PATCH] nmclan_cs: dereferencing skb after netif_rx()Florin Malita
From: Florin Malita <fmalita@gmail.com> The skb may be gone after netif_rx(), we can't use 'skb->len' to update the stats. 'pkt_len' should work instead. Coverity CID: 911. Signed-off-by: Florin Malita <fmalita@gmail.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-05[PATCH] bcm43xx: add DMA rx poll workaround to DMA4Michael Buesch
Also add the Poll RX DMA Memory workaround to the DMA4 (xmitstatus) path. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-05-26[PATCH] pcnet32: remove incorrect pcnet32_free_ringDon Fry
During a code scan for another change I discovered that this call to pcnet32_free_ring must be removed. If the open fails due to a lack of memory all the ring structures are removed via the call to free_ring and a subsequent call to open will dereference a null pointer in pcnet32_init_ring. Please apply to 2.6.17. Signed-off-by: Don Fry <brazilnut@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-26e1000: add shutdown handler back to fix WOLAuke Kok
Someone was waaay too aggressive and removed e1000's reboot notifier instead of porting it to the new way of the shutdown handler. This change broke wake on lan. Add the shutdown handler back in using the same method as e100 uses. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> (cherry picked from c653e6351e371b33b29871e5eedf610ffb3be037 commit)
2006-05-26Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2006-05-26[PATCH] arlan: fix section mismatch warningsRandy Dunlap
Fix section mismatch warnings: WARNING: drivers/net/wireless/arlan.o - Section mismatch: reference to .init.text:arlan_probe from .text between 'init_module' (at offset 0x3526) and 'cleanup_module' WARNING: drivers/net/wireless/arlan.o - Section mismatch: reference to .init.text:init_arlan_proc from .text between 'init_module' (at offset 0x3539) and 'cleanup_module' WARNING: drivers/net/wireless/arlan.o - Section mismatch: reference to .exit.text:cleanup_arlan_proc from .text between 'cleanup_module' (at offset 0x356c) and 'arlan_diagnostic_info_string' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-05-26[PATCH] wavelan: fix section mismatchRandy Dunlap
Fix section mismatch warning: WARNING: drivers/net/wireless/wavelan.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x371e) and 'cleanup_module' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-05-25[IRDA]: *_DONGLE should depend on IRTTY_SIRSamuel Ortiz
If a SIR dongle is built in the kernel while IRTTY_SIR is built as a module, kernel compilation will fail. Thus, the SIR dongle config should depend on the IRTTY_SIR. Closes kernel bug# 6512 (http://bugzilla.kernel.org/show_bug.cgi?id=6512) Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-24[PATCH] sky2: fix jumbo packet supportStephen Hemminger
The truncate threshold calculation to prevent receiver from getting stuck was incorrect, and it didn't take into account the upper limit on bits in the register so the jumbo packet support was broken. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-23Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NETFILTER]: SNMP NAT: fix memory corruption [IRDA]: fixup type of ->lsap_state [IRDA]: fix 16/32 bit confusion [NET]: Fix "ntohl(ntohs" bugs [BNX2]: Use kmalloc instead of array [BNX2]: Fix bug in bnx2_nvram_write() [TG3]: Add some missing rx error counters
2006-05-23[PATCH] orinoco: possible null pointer dereference in orinoco_rx_monitor()Florin Malita
If the skb allocation fails, the current error path calls dev_kfree_skb_irq() with a NULL argument. Also, 'err' is not being used. Coverity CID: 275. Signed-off-by: Florin Malita <fmalita@gmail.com> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-22[BNX2]: Use kmalloc instead of arrayMichael Chan
Use kmalloc() instead of a local array in bnx2_nvram_write(). Update version to 1.4.40. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-22[BNX2]: Fix bug in bnx2_nvram_write()Michael Chan
Fix a bug in bnx2_nvram_write() caused by a counter variable not correctly incremented by 4. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-22[TG3]: Add some missing rx error countersMichael Chan
Add some missing rx error counters for 5705 and newer chips. Update version to 3.58. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-21[PATCH] forcedeth: fix multi irq issuesAyaz Abdulla
With Manfred Spraul <manfred@colorfullife.com> and Andrew Morton <akpm@osdl.org> Bring back this recently-reverted patch, only fixed. Original changelog: From: Ayaz Abdulla <aabdulla@nvidia.com> This patch fixes the issues with multiple irqs. I am resending based on feedback. I decoupled the dma mask for consistent memory and fixed leak with multiple irq in error path. Thanks to Manfred for catching the spin lock problem. Fix it: From: Manfred Spraul <manfred@colorfullife.com> Fix bug introduced by ebf34c9b6fcd22338ef764b039b3ac55ed0e297b, covered in http://bugzilla.kernel.org/show_bug.cgi?id=6568. Remove second instance of the request_irq() calls: they were moved from nv_open into nv_request_irq. Thanks to Alistair Strachan <alistair@devzero.co.uk> for reporting and persisting. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-20[PATCH] winbond-840-remove-badness-in-pci_map_singleErling A. Jacobsen
Call pci_map_single() with the actual size of the receive buffers, not 0 (which skb->len is initialized to by dev_alloc_skb()). Signed-off-by: Erling A. Jacobsen <linuxcub@email.dk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-20[PATCH] network: axnet_cs: bug fix multicast code (support older ax88190 ↵Komuro
chipset) Dear Jeff axnet_cs: bug fix multicast code (support older ax88190 chipset) Signed-off-by: komurojun-mbn@nifty.com Best Regards Komuro Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-20[PATCH] skge: don't allow transmit ring to be too smallStephen Hemminger
The driver will get stuck (permanent transmit timeout), if the transmit ring size is set too small. It needs to have enough ring elements to hold one maximum size transmit. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-20[PATCH] skge: bad checksums on big-endian platformsStephen Hemminger
Skge driver always causes bad checksums on big-endian. The checksum in the receive control block was being swapped when it doesn't need to be. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-20Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2006-05-20[PATCH] sky2 version 1.4Stephen Hemminger
Need to track impact of this group of changes. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-20[PATCH] sky2: force NAPI repoll if busyStephen Hemminger
If the status ring processing can't keep up with the incoming frames, it is more efficient to have NAPI keep scheduling the poll routine rather than causing another interrupt. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-20[PATCH] sky2: more fixes for Yukon UltraStephen Hemminger
Logic error in the phy initialization code. Also, turn on wake on lan bit in status control. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-20[PATCH] Subjec: sky2, skge: correct PCI id for DGE-560TStephen Hemminger
The Dlink DGE-560T uses Yukon2 chipset so it needs sky2 driver; and the DGE-530T uses Yukon1 so it uses skge driver. Bug: http://bugzilla.kernel.org/show_bug.cgi?id=6544 Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-20[PATCH] sky2: allow dual port usageStephen Hemminger
If both ports are receiving on the SysKonnect dual port cards, then it appears the bus interface unit can give an interrupt status for frame before DMA has completed. This leads to bogus frames and general confusion. This is why receive checksumming is also messed up on dual port cards. A workaround for the out of order receive problem is to eliminating split transactions on PCI-X. This version is based of the current linux-2.6.git including earlier patch to disable dual ports. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-20[PATCH] via-rhine: revert "change mdelay to msleep and remove from ISR path"John W. Linville
Revert previous patch with subject "change mdelay to msleep and remove from ISR path". This patch seems to have caused bigger problems than it solved, and it didn't solve much of a problem to begin with... Discussion about backing-out this patch can be found here: http://marc.theaimsgroup.com/?l=linux-netdev&m=114321570402396&w=2 The git commit associated w/ the original patch is: 6ba98d311d0a4ff7dc36d8f435ce60174f4c30ec Signed-off-by: John W. Linville <linville@tuxdriver.com Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-20[PATCH] revert "forcedeth: fix multi irq issues"Andrew Morton
Revert ebf34c9b6fcd22338ef764b039b3ac55ed0e297b. Maybe. Due to crashes at shutdown - see http://bugzilla.kernel.org/show_bug.cgi?id=6568. Cc: Ayaz Abdulla <aabdulla@nvidia.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/shemminger/netdev-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/shemminger/netdev-2.6: sky2: prevent dual port receiver problems x86_64: Check for bad dma address in b44 1GB DMA workaround The ixp2000 driver for the enp2611 was developed on a board with
2006-05-17[PATCH] bcm43xx: associate on 'ifconfig up'David Woodhouse
I still need this hack to work around the fact that softmac doesn't attempt to associate when we bring the device up... Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-05-16[PATCH] x86_64: Check for bad dma address in b44 1GB DMA workaroundAndi Kleen
Needed for interaction with the nommu code in x86-64 which will return bad_dma_address if the address exceeds dma_mask. Cc: netdev@vger.kernel.org Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-15sky2: prevent dual port receiver problemsStephen Hemminger
When both ports are receiving simultaneously, the receive logic gets confused and may pass up a packet before it is full. This causes hangs, and IP will see lots of garbage packets. There is even the potential for data corruption if a later arriving packet DMA's into freed memory. It looks like a hardware bug because status arrives for a packet but no data is there. Until this bug is worked out, block the user from bringing up both ports at once. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-05-15x86_64: Check for bad dma address in b44 1GB DMA workaroundAndi Kleen
Needed for interaction with the nommu code in x86-64 which will return bad_dma_address if the address exceeds dma_mask. Cc: netdev@vger.kernel.org Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-05-15The ixp2000 driver for the enp2611 was developed on a board withLennert Buytenhek
three gigabit ports, but some enp2611 models only have two ports (and only one onboard PM3386.) The current driver assumes there are always three ports and so it doesn't work on the two-port version of the board at all. This patch adds a bit of logic to the enp2611 driver to limit the number of ports to 2 if the second PM3386 isn't detected. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-05-15[PATCH] dl2k needs dma-mapping.hAndrew Morton
On alpha: drivers/net/dl2k.c: In function `rio_free_tx': drivers/net/dl2k.c:768: error: `DMA_48BIT_MASK' undeclared (first use in this function) drivers/net/dl2k.c:768: error: (Each undeclared identifier is reported only once drivers/net/dl2k.c:768: error: for each function it appears in.) drivers/net/dl2k.c: In function `receive_packet': drivers/net/dl2k.c:896: error: `DMA_48BIT_MASK' undeclared (first use in this function) drivers/net/dl2k.c: In function `rio_close': drivers/net/dl2k.c:1803: error: `DMA_48BIT_MASK' undeclared (first use in this function) Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-21 13:31:08 +0000