aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2009-06-02mlx4_en: Updated driver versionYevgeny Petrilin
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-02mlx4_en: Added vlan_features supportYevgeny Petrilin
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-02mlx4_en: multiqueue supportYevgeny Petrilin
By default the driver opens 8 TX queues (defined by MLX4_EN_NUM_TX_RINGS). If the driver is configured to support Per Priority Flow Control, we open 8 additional TX rings. dev->real_num_tx_queues is always set to be MLX4_EN_NUM_TX_RINGS. The mlx4_en_select_queue() function uses standard hashing (skb_tx_hash) in case that PPFC is not supported or the skb contain a vlan tag, otherwise the queue is selected according to vlan priority. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-02mlx4_en: Coalescing target is equal for all mtu'sYevgeny Petrilin
The interrupt moderation should not depend on number of incoming bytes, but on number of incoming packets. The previous scheme caused very high interrupts rate for small messages when big MTU was configured. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-02mlx4_en: Work with part of the ports.Yevgeny Petrilin
If the initialization of one of the ports failed, there is no need to fail the other one as well. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-02mlx4_en renamed en_params.c to en_ethtool.cYevgeny Petrilin
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-02mlx4_en: Moved all module parameters handling to en_main.cYevgeny Petrilin
en_params.c file now only handles Ethtool functionality Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-02mlx4_en: Giving interface name in debug messagesYevgeny Petrilin
For each debug message, the message will show interface name in case that the net device was registered, and PCI bus ID with port number if we were not registered yet. Messages that are not port/netdev specific stayed in the old format Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-01atl1c_main.c: add wait_for_idle routineJoe Perches
Slight refactoring of duplicated wait for idle checks Spelling fix Signed-off-by: Joe Perches <joe@perches.com> Acked-by: jie.yang@atheros.com Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-01cpmac: prevent fatal exception in cpmac_end_xmitStefan Weil
We should not be stopping the subqueues in cpmac_end_xmit but rather test the status of them. Replace the calls to netif_subqueue_stop by __netif_subqueue_stopped. This fixes an unrecoverable exception from happening when running the driver. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-01cpmac: remove unused variable.Florian Fainelli
This patch removes the unused variables in cpmac_hw_error, cpmac_tx_timeout and cpmac_probe. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-01can: sja1000: generic OF platform bus driverWolfgang Grandegger
This patch adds a generic driver for SJA1000 chips on the OpenFirmware platform bus found on embedded PowerPC systems. You need a SJA1000 node definition in your flattened device tree source (DTS) file similar to: can@3,100 { compatible = "nxp,sja1000"; reg = <3 0x100 0x80>; interrupts = <2 0>; interrupt-parent = <&mpic>; nxp,external-clock-frequency = <16000000>; }; See also Documentation/powerpc/dts-bindings/can/sja1000.txt. CC: devicetree-discuss@ozlabs.org Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-01can: sja1000: stop misusing member base_addr of struct net_deviceWolfgang Grandegger
As discussed on the netdev mailing list, the member "base_addr" of "struct net_device" should not be (mis)used to store the virtual address to the SJA1000 register area. According to David Miller, it's only use is to allow ISA and similar primitive bus devices to have their I/O ports changed via ifconfig. The virtual address is now stored in the private data structure of the SJA1000 device and the callback functions use "struct sja1000_priv" instead of the unneeded "struct net_device". Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-01can: some fixes and cleanups to the initial device driver interfaceWolfgang Grandegger
This patch fixes a few errors sneaked into the initial version of the device driver interface. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29usbnet: ratelimit warning messages invoked from callback handlerAndré Goddard Rosa
Warning messages coming from rtl8150 driver can flood the console and make a DTV/set-top-box unable to decode video/audio frames. 'Pegasus' driver handles this situation similarly, preventing this from happening there. It happens with a low cost BCM MIPS embedded platform, whenever timeout errors were coming from usbnet device, making platform unusable for viewer watching. Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29fec: Add FEC support for MX35 processorFabio Estevam
Add FEC support for MX35 processor. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29irda-usb: suspend/resume supportTadashi Abe
This patch adds power management suspend/resume hooks for irda-usb. Signed-off-by: Tadashi Abe <tabe@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29mac8390: use printk MAC address formatFinn Thain
mac8390: use printk MAC address format Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29net: convert unicast addr listJiri Pirko
This patch converts unicast address list to standard list_head using previously introduced struct netdev_hw_addr. It also relaxes the locking. Original spinlock (still used for multicast addresses) is not needed and is no longer used for a protection of this list. All reading and writing takes place under rtnl (with no changes). I also removed a possibility to specify the length of the address while adding or deleting unicast address. It's always dev->addr_len. The convertion touched especially e1000 and ixgbe codes when the change is not so trivial. Signed-off-by: Jiri Pirko <jpirko@redhat.com> drivers/net/bnx2.c | 13 +-- drivers/net/e1000/e1000_main.c | 24 +++-- drivers/net/ixgbe/ixgbe_common.c | 14 ++-- drivers/net/ixgbe/ixgbe_common.h | 4 +- drivers/net/ixgbe/ixgbe_main.c | 6 +- drivers/net/ixgbe/ixgbe_type.h | 4 +- drivers/net/macvlan.c | 11 +- drivers/net/mv643xx_eth.c | 11 +- drivers/net/niu.c | 7 +- drivers/net/virtio_net.c | 7 +- drivers/s390/net/qeth_l2_main.c | 6 +- drivers/scsi/fcoe/fcoe.c | 16 ++-- include/linux/netdevice.h | 18 ++-- net/8021q/vlan.c | 4 +- net/8021q/vlan_dev.c | 10 +- net/core/dev.c | 195 +++++++++++++++++++++++++++----------- net/dsa/slave.c | 10 +- net/packet/af_packet.c | 4 +- 18 files changed, 227 insertions(+), 137 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29bonding: use bond_is_lb() when it's appropriateJiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29cxgb3: add support for the Aquantia 10G-BT phyDivy Le Ray
Add support for the Aquantia AQ1002 10G-BaseT phy. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29cxgb3: Add Aeluros 2020 phy supportDivy Le Ray
Add support for the AEL2020 phy. Add PCI IDs of the boards using this phy. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29cxgb3: move away from LLTXDivy Le Ray
cxgb3 no longer advertizes LLTX. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29netdev: bfin_mac: add Blackfin MII bus to platform bus to allow DSA accessGraf Yang
When we register the MII bus to the platfrom bus, the Distributed Switch Architecture can hook in transparently. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29netdev: bfin_mac: fix performance issue found by netperfMichael Hennerich
- Remove dead long delay - Use proper defines - Remove broken implementation of the TX DMA Data Alignment TXDWA feature Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29netdev: bfin_mac: fix malformed UDP packet transmission when polling with KGDBSonic Zhang
Writes to the DMA descriptors may sit in the internal Blackfin data buffers and not actually be available when the DMA engine goes to fetch them. This does not typically happen, but when dealing with short/fast packets such as UDP and polling KGDB, this occurs much more frequently. Same goes for heavy loads as seen by netperf tests or large scp transfers. So force the buffers to drain with SSYNC otherwise we get random malformed packets. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29netdev: bfin_mac: drop useless IRQF_SHARED from Blackfin EMAC interruptMichael Hennerich
The IRQ used by the Blackfin EMAC is internal to the peripheral and cannot be used to generate any other interrupt, so there is no point in marking it as IRQF_SHARED. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29veth: dont release skb->dst in veth_xmit()Eric Dumazet
No need to release skb->dst, its now done by core network. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29korina: periodically poll the mediaFlorian Fainelli
This patch makes the korina driver poll the media for link change. This is actually required on Mikrotik RB532 (not RB532A) for korina to operate properly. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29net: replace dma_sync_single with dma_sync_single_for_cpuFUJITA Tomonori
This replaces dma_sync_single() with dma_sync_single_for_cpu() because dma_sync_single() is an obsolete API; include/linux/dma-mapping.h says: /* Backwards compat, remove in 2.7.x */ #define dma_sync_single dma_sync_single_for_cpu #define dma_sync_sg dma_sync_sg_for_cpu Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29net: dont update dev->trans_startEric Dumazet
Second round of drivers for Gb cards (and NIU one I forgot in the 10GB round) Now that core network takes care of trans_start updates, dont do it in drivers themselves, if possible. Drivers can avoid one cache miss (on dev->trans_start) in their start_xmit() handler. Exceptions are NETIF_F_LLTX drivers Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29net: dont update dev->trans_start in 10GB driversEric Dumazet
Followup of commits 9d21493b4beb8f918ba248032fefa393074a5e2b and 08baf561083bc27a953aa087dd8a664bb2b88e8e (net: tx scalability works : trans_start) (net: txq_trans_update() helper) Now that core network takes care of trans_start updates, dont do it in drivers themselves, if possible. Multi queue drivers can avoid one cache miss (on dev->trans_start) in their start_xmit() handler. Exceptions are NETIF_F_LLTX drivers (vxge & tehuti) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29Merge branch 'linux-2.6.31.y' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/inaky/wimax
2009-05-28wimax/i2400m: usb: fix device reset on autosuspend while not yet idleInaky Perez-Gonzalez
When the i2400m is connected to a network, the host interface (USB) cannot be suspended. For that to happen, the device has to have negotiated with the basestation to put the link on IDLE state. If the host tries to put the device in standby while it is connected but not idle, the device resets, as the driver should not do that. To avoid triggering that, when the USB susbsytem requires the driver to autosuspend the device, the driver checks if the device is not yet idle. If it is not, the request is requested (will be retried again later on after the autosuspend timeout). At some point the device will enter idle and the request will succeed (unless of course, there is network traffic, but at that point, there is no idle neither in the link or the host interface). Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-05-28wimax/i2400m: sdio: set the block size before enabling the functionInaky Perez-Gonzalez
From a fix by Cindy H Kao: Block size has to be set before sending IOE enable because the firmware reads the block size register before it reads IOE register. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-05-28wimax/i2400m: remove redundant readiness checks from i2400m_report_tlv_*()Inaky Perez-Gonzalez
Functions i2400m_report_tlv*() are only called from i2400m_report_hook(), called in a workqueue by i2400m_report_hook_work(). The scheduler checks for device readiness before scheduling. Added an extra check for readiness in i2400m_report_hook_work(), which makes all the checks down the line redundant. Obviously the device state could change in the middle, but error handling would take care of that. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-05-28wimax/i2400m: factor out 'state report's TLV handling to a functionInaky Perez-Gonzalez
i2400m_report_state_hook() is going to get messier as we add handling code. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-05-28wimax/i2400m: allow kernel commands to device to be logged tooInaky Perez-Gonzalez
By running 'echo 1 > /sys/kernel/debug/wimax:wmxX/i2400m/trace_msg_from_user', the driver will echo to user space all the commands being sent to the device from user space, along with the responses. However, this only helps with the commands being sent from user space; with this patch, the trace hook is moved to i2400m_msg_to_dev(), which is the single access point for running commands to the device (both by user space and the kernel driver). This allows better debugging by having a complete stream of commands/acks and reports. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-05-28wimax/i2400m: trace commands sent from user space on the "echo" pipeInaky Perez-Gonzalez
When commands are sent from user space, trace both the command sent and the answer received over the "echo" pipe instead of over the "trace" pipe when command tracing is enabled. As well, when the device sends a reports/indications, send it over the "echo" pipe. The "trace" pipe is used by the device to send firmware traces; gets confusing. Another named pipe makes it easier to split debug information. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-05-28wimax/i2400m: generate fake source MAC address with random_ether_addr()Inaky Perez-Gonzalez
The WiMAX i2400m driver needs to generate a fake source MAC address to fake an ethernet header (for destination, the card's MAC is used). This is the source of the packet, which is the basestation it came from. The basestation's mac address is not usable for this, as it uses its own namespace and it is not always available. Currently the fake source MAC address was being set to all zeros, which was causing trouble with bridging. Use random_ether_addr() to generate a proper one that creates no trouble. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-05-28rtl8187: Remove pointless check in rtl8187_rx_cb().David S. Miller
First of all, it exposes the SKB list implementation. Second of all it's not needed. If we get called here, we successfully enqueued the URB with the linked SKB and such a completion only gets called one time on such an SKB. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-28p54: Use SKB list handling helpers instead of by-hand code.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-27wavelan: Remove bogus debugging on skb->next being non-NULL.David S. Miller
This eliminates explicit references to the SKB list handling implementation. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-27appletalk: Add proper locking around IPDDP routing table.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-27net: use netdev stats in b44, sundance, via-rhine and via-velocityEric Dumazet
Use struct net_device_stats provided in struct net_device instead of private ones. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-27r6040: check and update media statusFlorian Fainelli
This patch removes the not-that-useful message in the r6040_timer which prints the PHY status. Instead replace it with a call to mii_check_media which will update the link status and print it on startup. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-26ixgbe: Fix build warningPeter P Waskiewicz Jr
This patch fixes a build warning due to an unused label. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-26sh_eth: Remove references to BUS_ID_SIZE, use MII_BUS_ID_SIZE instead.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-26cpmac: Remove references to BUS_ID_SIZE, use MII_BUS_ID_SIZE.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-26ixp4xx_eth: Remove references to BUS_ID_SIZE.David S. Miller
Use MII_BUS_ID_SIZE instead. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-19 10:27:26 +0000