aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2006-11-06[PATCH] ehea: Removed redundant defineThomas Klein
Removed define H_CB_ALIGNMENT which is already defined in include/asm-powerpc/hvcall.h Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-06[PATCH] ehea: Nullpointer dereferencation fixThomas Klein
Fix: Must check for nullpointer before dereferencing it - not afterwards. Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-05[TG3]: Fix 2nd ifup failure on 5752M.Michael Chan
This fixes a bug reported in: http://bugzilla.kernel.org/show_bug.cgi?id=7438 tg3_close() turns off the PHY if WoL and ASF are both disabled. On the next tg3_open(), some devices such as the 5752M will not be brought up correctly without a PHY reset early in the reset sequence. The PHY clock is needed for some internal MAC blocks to function correctly. This problem is fixed by always resetting the PHY early in tg3_reset_hw() when it is called from tg3_open() or tg3_resume(). tg3_setup_phy() can then be called later in the sequence without the reset_phy parameter set to 1, since the PHY reset is already done. Update version to 3.68. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-31[PATCH] sky2: netpoll on dual port cardsStephen Hemminger
The sky2 driver uses a single NAPI poll routine for both ports on dual ported cards (because there is a single IRQ and status ring). Netpoll makes assumptions about the relationship between network device and NAPI that aren't correct on the second port, this will cause the port to never clear work. Most systems, just have single port, so not a big issue. The easy fix is just make the second port, not netpoll capable. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-31[PATCH] skge, sky2, et all. gplv2 onlyStephen Hemminger
I don't want my code to downgraded to GPLv3 because of cut-n-pasted the comments. These files which I hold copyright on were started before it was clear what GPLv3 was going to be. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-31[PATCH] net s2io: return on NULL dev_alloc_skb()David Rientjes
Checks for NULL dev_alloc_skb() and returns on true to avoid subsequent dereference. Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Christoph Hellwig <hch@infrared.org> Signed-off-by: David Rientjes <rientjes@cs.washington.edu> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-31[PATCH] ehea: kzalloc GFP_ATOMIC fixJan-Bernd Themann
This patch fixes kzalloc parameters (GFP_ATOMIC instead of GFP_KERNEL) Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-31[PATCH] myri10ge: ServerWorks HT2000 PCI id is already defined in pci_ids.hBrice Goglin
No need to keep defining PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE in the driver code since it is now defined in pci_ids.h. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-31[PATCH] sky2: not experimentalStephen Hemminger
The sky2 driver is no longer in experimental state. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-31[PATCH] n2: fix confusing error codeAkinobu Mita
modprobe n2 with no parameters or no such devices will get confusing error message. # modprobe n2 ... Kernel does not have module support This patch replaces return code from -ENOSYS to -EINVAL. Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> drivers/net/wan/n2.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-31[PATCH] tokenring: fix module_init error handlingAkinobu Mita
- Call platform_driver_unregister() before return when no cards found. (fixes data corruption when no cards found) - Check platform_device_register_simple() return value Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Mike Phillips <mikep@linuxtr.net> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> drivers/net/tokenring/proteon.c | 9 +++++++-- drivers/net/tokenring/skisa.c | 9 +++++++-- 2 files changed, 14 insertions(+), 4 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-31[PATCH] ep93xx_eth: don't report RX errorsLennert Buytenhek
Flooding the console with error messages for every RX FIFO overrun, checksum error and framing error isn't very sensible. Each of these errors can occur during normal operation, so stop printk'ing error messages for RX errors at all. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-31[PATCH] ep93xx_eth: fix unlikely(x) > y testLennert Buytenhek
Fix unlikely(x) > y test in ep93xx_eth. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-31[PATCH] ep93xx_eth: fix RX/TXstatus ring full handlingLennert Buytenhek
Ray Lehtiniemi reported that an incoming UDP packet flood can lock up the ep93xx ethernet driver. Herbert Valerio Riedel noted that due to the way ep93xx_eth manages the RX/TXstatus rings, it cannot distinguish a full ring from an empty one, and correctly suggested that this was likely to be causing this lockup to occur. Instead of looking at the hardware's RX/TXstatus ring write pointers to determine when to stop reading from those rings, we should just check every individual RX/TXstatus descriptor's valid bit instead, since there is no other way to distinguish an empty ring from a full ring, and if there is a descriptor waiting, we take the hit of reading the descriptor from memory anyway. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-31[MIPS] Sort out missuse of __init for prom_getcmdline()Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-30[NET] sealevel: uses arp_broken_opsRandy Dunlap
On Wed, 25 Oct 2006 18:03:13 +0200 Toralf Förster wrote: > WARNING: "arp_broken_ops" [drivers/net/wan/sealevel.ko] undefined! > make[1]: *** [__modpost] Error 1 > make: *** [modules] Error 2 > > Here's the config: ... > # CONFIG_INET is not set > CONFIG_SEALEVEL_4021=m Sealevel uses arp_broken_ops so it needs to depend on INET. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-29Revert "r8169: mac address change support"Linus Torvalds
This reverts commit a2b98a697fa4e7564f78905b83db122824916cf9. As per Guennadi Liakhovetski, the mac address change support code breaks some normal uses (_without_ any address changes), and until it's all sorted out, we're better off without it. Says Francois: "Go revert it. Despite what I claimed, I can not find a third-party confirmation by email that it works elsewhere. It would probably be enough to remove the call to __rtl8169_set_mac_addr() in rtl8169_hw_start() though." See also http://bugzilla.kernel.org/show_bug.cgi?id=6032 Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6: [PATCH] PCMCIA: fix __must_check warnings [PATCH] PCMCIA: handle sysfs, PCI errors [PATCH] Export soc_common_drv_pcmcia_remove to allow modular PCMCIA. [PATCH] ioremap balanced with iounmap for drivers/pcmcia [PATCH] pcmcia: au1000_generic fix [PATCH] i82092: wire up errors from pci_register_driver() [PATCH] CONFIG_PM=n slim: drivers/pcmcia/* [PATCH] pcmcia/ds: driver layer error checking [PATCH] pcmcia: update alloc_io_space for conflict checking for multifunction PC card [PATCH] pcmcia: add more IDs to hostap_cs.c [PATCH] pcmcia: at91_cf update
2006-10-25Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://lost.foo-projects.org/~ahkok/git/netdev-2.6 into upstream-fixes
2006-10-25Merge master.kernel.org:/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/herbert/crypto-2.6: [CRYPTO] users: Select ECB/CBC where needed
2006-10-25[PATCH] pcmcia: add more IDs to hostap_cs.cDominik Brodowski
As a replacement for the broad manufactor/card ID match we commented out because of conflicts with pcnet_cs, add two product ID matches. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-10-25[CRYPTO] users: Select ECB/CBC where neededPatrick McHardy
CRYPTO_MANAGER is selected automatically by CONFIG_ECB and CONFIG_CBC. config CRYPTO_ECB tristate "ECB support" select CRYPTO_BLKCIPHER select CRYPTO_MANAGER I've added CONFIG_ECB to the ones you mentioned and CONFIG_CBC to gssapi. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-10-24[PATCH] missing include of dma-mapping.hAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-24e100: account for closed interface when shutting downAuke Kok
Account for the interface being closed before disabling polling on a device, to fix shutdown on some systems that explcitly close the netdevice before calling shutdown. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-10-24e1000: Increment version to 7.2.9-k4Auke Kok
Significant fixes -> increment driver version. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-10-24e1000: FIX: move length adjustment due to crc stripping disabled.Jesse Brandeburg
Move the length (rx_bytes counter) adjustment of 4 bytes down to after the TBI_ACCEPT workaround. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-10-24e1000: FIX: Don't limit descriptor size to 4kb for PCI-E adaptersJesse Brandeburg
82571 and newer chispets don't need to limit desc. length to 4kb and can handle 8kb sizes. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-10-24e1000: FIX: Disable Packet Split for non jumbo framesJesse Brandeburg
Allocations using alloc_page are taking too long for normal MTU, so use LPE only for jumbo frames. Signed-off-bu: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-10-24e1000: FIX: fix wrong txdctl threshold bitmasksBruce Allan
Threshold bitmasks for prefetch, host and writeback were clearing bits that they were not supposed to. The leftmost 2 bits in the byte for each threshold are reserved. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-10-24e1000: FIX: 82542 doesn't support WoLAuke Kok
Exclude 82542 when setting up WoL. This card does not do WoL at all. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-10-24e1000: FIX: don't poke at manageability registers for incompatible adaptersJesse Brandeburg
The MANC register should not be read for PCI-E adapters at all, as well as 82543 and older where 82543 would master abort when this register was accessed. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-10-21[PATCH] ibmveth: Fix index increment calculationDavid Gibson
On Thu, Oct 12, 2006 at 06:22:14PM +1000, David Gibson wrote: > Your recent ibmveth commit, 751ae21c6cd1493e3d0a4935b08fb298b9d89773 > ("fix int rollover panic"), causes a rapid oops on my test machine > (POWER5 LPAR). > > I've bisected it down to that commit, but am still investigating the > cause of the crash itself. Found the problem, I believe: an object lesson in the need for great caution using ++. [...] @@ -213,6 +213,7 @@ static void ibmveth_replenish_buffer_poo } free_index = pool->consumer_index++ % pool->size; + pool->consumer_index = free_index; index = pool->free_map[free_index]; ibmveth_assert(index != IBM_VETH_INVALID_MAP); Since the ++ is used as post-increment, the increment is not included in free_index, and so the added line effectively reverts the increment. The produced_index side has an analagous bug. The following change corrects this: The recent commit 751ae21c6cd1493e3d0a4935b08fb298b9d89773 introduced a bug in the producer/consumer index calculation in the ibmveth driver - incautious use of the post-increment ++ operator resulted in an increment being immediately reverted. This patch corrects the logic. Without this patch, the driver oopses almost immediately after activation on at least some machines. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-21Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2006-10-21[PATCH] Fix timer raceRalf Baechle
When closing the driver or reinitializing the hardware there is the usual del_timer() race condition that exists when timers re-add themselves. Fix by conversion to del_timer_sync(). Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-21[PATCH] Remove useless comment from sb1250Dave Jones
Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-21Merge tag 'jg-20061012-00' of ↵Jeff Garzik
git://electric-eye.fr.zoreil.com/home/romieu/linux-2.6 into tmp
2006-10-21[PATCH] ucc_geth: changes to ucc_geth driver as a result of qe_lib changes ↵Li Yang
and bugfixes changes due to qe_lib changes include: o removed inclusion of platform header file o removed platform_device code, replaced with of_device o removed typedefs o uint -> u32 conversions o removed following defines: QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER, BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET because they hid sizeof/in_be32/out_be32 operations from the reader. o removed irrelevant comments, added others to resemble removed BD_ defines o const'd and uncasted all get_property() assignments bugfixes, courtesy of Scott Wood, include: - Read phy_address as a u32, not u8. - Match on type == "network" as well as compatible == "ucc_geth", as device_is_compatible() will only compare up to the length of the test string, allowing "ucc_geth_phy" to match as well. - fixes the MAC setting code in ucc_geth.c. The old code was overwriting and dereferencing random stack contents. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-21[PATCH] sky2: 88E803X transmit lockupStephen Hemminger
The reason sky2 driver was locking up on transmit on the Yukon-FE chipset is that it was misconfiguring the internal RAM buffer so the transmitter and receiver were sharing the same space. The code assumed there was 16K of RAM on Yukon-FE (taken from vendor driver sk98lin which is even more f*cked up on this). Then it assigned based on that. The giveaway was that the registers would only hold 9bits so both RX/TX had 0..1ff for space. It is a wonder it worked at all! This patch addresses this, and fixes an easily reproducible hang on Transmit. Only the Yukon-FE chip is Marvell 88E803X (10/100 only) are affected. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-21[PATCH] e1000: Reset all functions after a PCI errorLinas Vepstas
During the handling of the PCI error recovery sequence, the current e1000 driver erroneously blocks a device reset for any but the first PCI function. It shouldn't -- this is a cut-n-paste error from a different driver (which tolerated only one hardware reset per hardware card). Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-21[PATCH] WAN/pc300: handle, propagate minor errorsJeff Garzik
- move definition of 'tmc' and 'br' locals closer to usage - handle clock_rate_calc() error - propagate errors back to upper level open routine Signed-off-by: Jeff Garzik <jeff@garzik.org> Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-21[PATCH] Update smc91x driver with ARM Versatile board infoDeepak Saxena
We need to specify a Versatile-specific SMC_IRQ_FLAGS value or the new generic IRQ layer will complain thusly: No IRQF_TRIGGER set_type function for IRQ 25 (<NULL>) Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Cc: Jeff Garzik <jeff@garzik.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Nicolas Pitre <nico@cam.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-20Revert "[mv643xx] Add pci device table for auto module loading."Linus Torvalds
This reverts commit 4596c75c23dde2623cbeec69357d5eb13d28387e as requested by Olaf Hering. It causes compile errors, and says Olaf: "This change is also wrong, the autoloading works perfect with 2.6.18, no need to add random PCI ids. See commit a0245f7ad5214cb00131d7cd176446e067c913dc, platform devices have now a modalias entry in sysfs. The network card is not a PCI device." Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-20Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (36 commits) [Bluetooth] Fix HID disconnect NULL pointer dereference [Bluetooth] Add missing entry for Nokia DTL-4 PCMCIA card [Bluetooth] Add support for newer ANYCOM USB dongles [NET]: Can use __get_cpu_var() instead of per_cpu() in loopback driver. [IPV4] inet_peer: Group together avl_left, avl_right, v4daddr to speedup lookups on some CPUS [TCP]: One NET_INC_STATS() could be NET_INC_STATS_BH in tcp_v4_err() [NETFILTER]: Missing check for CAP_NET_ADMIN in iptables compat layer [NETPOLL]: initialize skb for UDP [IPV6]: Fix route.c warnings when multiple tables are disabled. [TG3]: Bump driver version and release date. [TG3]: Add lower bound checks for tx ring size. [TG3]: Fix set ring params tx ring size implementation [NET]: reduce per cpu ram used for loopback stats [IPv6] route: Fix prohibit and blackhole routing decision [DECNET]: Fix input routing bug [TCP]: Bound TSO defer time [IPv4] fib: Remove unused fib_config members [IPV6]: Always copy rt->u.dst.error when copying a rt6_info. [IPV6]: Make IPV6_SUBTREES depend on IPV6_MULTIPLE_TABLES. [IPV6]: Clean up BACKTRACK(). ...
2006-10-20[PATCH] e100: fix reboot -f with netconsole enabledAuke Kok
When rebooting with netconsole over e100, the driver shutdown code would deadlock with netpoll. Reduce shutdown code to a bare minimum while retaining WoL and suspend functionality. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-20[NET]: Can use __get_cpu_var() instead of per_cpu() in loopback driver.Eric Dumazet
As BHs are off in loopback_xmit(), preemption cannot occurs, so we can use __get_cpu_var() instead of per_cpu() (and avoid a preempt_enable()/preempt_disable() pair) Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-18[TG3]: Bump driver version and release date.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-18[TG3]: Add lower bound checks for tx ring size.Michael Chan
The minimum tx ring size must be greater than MAX_SKB_FRAGS or 3 times that on some chips with TSO bugs. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-18[TG3]: Fix set ring params tx ring size implementationRanjit Manomohan
Fixes the implementation of the ethtool set ring parameters for the tg3 transmit ring. The size of tx_pending is taken into account before doing a netif_wake_queue. This prevents the interface from locking up when smaller transmit ring sizes are used. Signed-off-by: Ranjit Manomohan <ranjitm@google.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-18[NET]: reduce per cpu ram used for loopback statsEric Dumazet
We dont need a full struct net_device_stats (currently 23 long : 184 bytes on x86_64) per possible CPU, but only two counters : bytes and packets We save few CPU cycles too in loopback_xmit() not updating 4 fields, but 2. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-18Merge branch 'ubuntu-updates' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/bcollins/ubuntu-2.6 * 'ubuntu-updates' of master.kernel.org:/pub/scm/linux/kernel/git/bcollins/ubuntu-2.6: [pci_ids] Add Quicknet XJ vendor/device ID's. [valkyriefb] Ifdef for when CONFIG_NVRAM isn't enabled. [platinumfb] Ifdef for when CONFIG_NVRAM isn't enabled. [igafb] Add pci dev table for module auto loading. [controlfb] Ifdef for when CONFIG_NVRAM isn't enabled. [hid-core] TurboX Keyboard needs NOGET quirk. [ixj] Add pci dev table for module auto loading. [initio] Add pci dev table for module auto loading. [fdomain] Add pci dev table for module auto loading. [BusLogic] Add pci dev table for auto module loading. [mv643xx] Add pci device table for auto module loading. [alim7101] Add pci dev table for auto module loading.
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-28 23:20:05 +0000