aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2008-10-26r8169: revert "read MAC address from EEPROM on init"Francois Romieu
This reverts commit 7bf6bf4803df1adc927f585168d2135fb019c698. The code has both a short existence and an increasing track of failures despite some work to amend it for -rc1. It is not just a matter of reading the eeprom: sometimes the eeprom is read correctly, then the mac address is not written correctly back into the mac registers. Some chipsets seem to work reliably but it is not clear at this point if the code can simply be made to work on a per-chipset basis and post -rc1 is not the place where I want to experiment these things. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (29 commits) tcp: Restore ordering of TCP options for the sake of inter-operability net: Fix disjunct computation of netdev features sctp: Fix to handle SHUTDOWN in SHUTDOWN_RECEIVED state sctp: Fix to handle SHUTDOWN in SHUTDOWN-PENDING state sctp: Add check for the TSN field of the SHUTDOWN chunk sctp: Drop ICMP packet too big message with MTU larger than current PMTU p54: enable 2.4/5GHz spectrum by eeprom bits. orinoco: reduce stack usage in firmware download path ath5k: fix suspend-related oops on rmmod [netdrvr] fec_mpc52xx: Implement polling, to make netconsole work. qlge: Fix MSI/legacy single interrupt bug. smc911x: Make the driver safer on SMP smc911x: Add IRQ polarity configuration smc911x: Allow Kconfig dependency on ARM sis190: add identifier for Atheros AR8021 PHY 8139x: reduce message severity on driver overlap igb: add IGB_DCA instead of selecting INTEL_IOATDMA igb: fix tx data corruption with transition to L0s on 82575 ehea: Fix memory hotplug support netdev: DM9000: remove BLACKFIN hacking in DM9000 netdev driver ...
2008-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6: xtensa: Add config files for Diamond 232L - Rev B processor variant xtensa: Fix io regions xtensa: Add support for the Sonic Ethernet device for the XT2000 board. xtensa: replace remaining __FUNCTION__ occurrences xtensa: use newer __SPIN_LOCK_UNLOCKED macro XTENSA: warn about including <asm/rwsem.h> directly.
2008-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (53 commits) powerpc: Support for relocatable kdump kernel powerpc: Don't use a 16G page if beyond mem= limits powerpc: Add del_node() for early boot code to prune inapplicable devices. powerpc: Further compile fixup for STRICT_MM_TYPECHECKS powerpc: Remove empty #else from signal_64.c powerpc: Move memory size print into common show_cpuinfo for 32-bit hvc_console: Remove __devexit annotation of hvc_remove() hvc_console: Add support for tty window resizing hvc_console: Fix loop if put_char() returns 0 hvc_console: Add tty driver flag TTY_DRIVER_RESET_TERMIOS hvc_console: Add a hangup notifier for backends powerpc/83xx: Add DS1339 RTC support for MPC8349E-mITX boards .dts powerpc/83xx: Add support for MCU microcontroller in .dts files powerpc/85xx: Move mpc8572ds.dts to address-cells/size-cells = <2> of/spi: Support specifying chip select as active high via device tree powerpc: Remove device_type = "board_control" properties in .dts files i2c-cpm: Suppress autoprobing for devices powerpc/85xx: Fix mpc8536ds dma interrupt numbers powerpc/85xx: Enable enhanced functions for 8536 TSEC powerpc: Delete unused prom_strtoul and prom_memparse ...
2008-10-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/ehca: Reject dynamic memory add/remove when ehca adapter is present IB/ehca: Fix reported max number of QPs and CQs in systems with >1 adapter IPoIB: Set netdev offload features properly for child (VLAN) interfaces IPoIB: Clean up ethtool support mlx4_core: Add Ethernet PCI device IDs mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC mlx4_core: Multiple port type support mlx4_core: Ethernet MAC/VLAN management mlx4_core: Get ethernet MTU and default address from firmware mlx4_core: Support multiple pre-reserved QP regions Update NetEffect maintainer emails to Intel emails RDMA/cxgb3: Remove cmid reference on tid allocation failures IB/mad: Use krealloc() to resize snoop table IPoIB: Always initialize poll_timer to avoid crash on unload IB/ehca: Don't allow creating UC QP with SRQ mlx4_core: Add QP range reservation support RDMA/ucma: Test ucma_alloc_multicast() return against NULL, not with IS_ERR()
2008-10-23net: Fix disjunct computation of netdev featuresHerbert Xu
My change commit e2a6b85247aacc52d6ba0d9b37a99b8d1a3e0d83 net: Enable TSO if supported by at least one device didn't do what was intended because the netdev_compute_features function was designed for conjunctions. So what happened was that it would simply take the TSO status of the last constituent device. This patch extends it to support both conjunctions and disjunctions under the new name of netdev_increment_features. It also adds a new function netdev_fix_features which does the sanity checking that usually occurs upon registration. This ensures that the computation doesn't result in an illegal combination since this checking is absent when the change is initiated via ethtool. The two users of netdev_compute_features have been converted. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-23Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2008-10-22mlx4_core: Add Ethernet PCI device IDsYevgeny Petrilin
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22mlx4_en: Add driver for Mellanox ConnectX 10GbE NICYevgeny Petrilin
The Mellanox ConnectX can operate as an InfiniBand adapter, as an Ethernet NIC, or as a Fibre Channel (FC) HBA. The kernel has a low-level driver, mlx4_core, which handles multiplexing access to the device, and there is also already an InfiniBad driver, mlx4_ib. This patch adds a new driver, mlx4_en, which implements a standard Ethernet NIC driver. Signed-off-by: Liran Liss <liranl@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22mlx4_core: Multiple port type supportYevgeny Petrilin
Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22p54: enable 2.4/5GHz spectrum by eeprom bits.Christian Lamparter
Badness at /home/proski/src/linux-2.6/net/mac80211/rx.c:2200 NIP: c02bc850 LR: c02ab268 CTR: 00000000 REGS: ef01fcc0 TRAP: 0700 Tainted: G W (2.6.27-wl) MSR: 00029032 <EE,ME,IR,DR> CR: 22004084 XER: 20000000 TASK = c1a58800[1778] 'p54pci' THREAD: ef01e000 [...] NIP [c02bc850] __ieee80211_rx+0x17c/0x638 LR [c02ab268] ieee80211_tasklet_handler+0x104/0x120 Call Trace: [ef01fd70] [c1a0c020] 0xc1a0c020 (unreliable) [ef01fdb0] [c02ab268] ieee80211_tasklet_handler+0x104/0x120 [...] the problem was that some older cards are mis-identified and didn't support 5GHz rates, while they have the right MAC & Synth chip. This patch changes the way how p54 decides if it should enable 11a channels or not. Reported-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-22orinoco: reduce stack usage in firmware download pathAndrey Borzenkov
orinoco_dl_firmware and symbol_dl_mage allocate large local variables (1K); at least orinoco fails with panic or hung kernel if 4K stacks is enabled. Allocate large buffers dynamically at run time. Tested-By: Andrey Borzenkov <arvidjaar@mail.ru> for Agere case Signed-off-by: Andrey Borzenkov < arvidjaar@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-22ath5k: fix suspend-related oops on rmmodBob Copeland
Based on a patch by Elias Oltmanns, we call ath5k_init in resume even if we didn't previously open the device. Besides starting up the device unnecessarily, this also causes an oops on rmmod because mac80211 will not invoke ath5k_stop and softirqs are left running after the module has been unloaded. Add a new state bit, ATH_STAT_STARTED, to indicate that we have been started up. Reported-by: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: Elias Oltmanns <eo@nebensachen.de> Signed-off-by: Bob Copeland <me@bobcopeland.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-22mlx4_core: Ethernet MAC/VLAN managementYevgeny Petrilin
Add support for managing MAC and VLAN filters for each port. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Oren Duer <oren@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22mlx4_core: Get ethernet MTU and default address from firmwareYevgeny Petrilin
Get maximum ethernet MTU and default MAC address from the firmware QUERY_DEV_CAP command. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22mlx4_core: Support multiple pre-reserved QP regionsYevgeny Petrilin
For ethernet support, we need to reserve QPs for the ethernet and fibre channel driver. The QPs are reserved at the end of the QP table. (This way we assure that they are aligned to their size) We need to consider these reserved ranges in bitmap creation, so we extend the mlx4 bitmap utility functions to allow reserved ranges at both the bottom and the top of the range. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22[netdrvr] fec_mpc52xx: Implement polling, to make netconsole work.Jon Smirl
Implement polling for 5200FEC to make netconsole work. Tested on Phytec pcm030 and Efika. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-22qlge: Fix MSI/legacy single interrupt bug.Ron Mercer
The chip can issue spurious interrupts for single interrupt modes. We use disable to clear the condition and allow processing to continue. Also got rid of legacy specific code since it now needs to be done on MSI single irq also. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-22smc911x: Make the driver safer on SMPCatalin Marinas
This patch extends the critical regions covered by lp->lock to make it safer on SMP. The main failure point was the smc911x_hard_start_xmit function being called from different CPUs. It was tested on the ARM SMP platforms. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-22smc911x: Add IRQ polarity configurationCatalin Marinas
Platforms like ARM Ltd's RealView require the IRQ polarity bit to be set for the SMC9118 chip. This patch allows the dynamic configuration via the smc911x_platdata structure. This patch also changes the smc91x_platdata structure name to the correct smc911x_platdata in the smc911x_drv_probe() function. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-22smc911x: Allow Kconfig dependency on ARMCatalin Marinas
Since more ARM platforms use this device, it is easier to add a dependency on ARM rather than individual platforms. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-22sis190: add identifier for Atheros AR8021 PHYFrancois Romieu
Fixes http://bugzilla.kernel.org/show_bug.cgi?id=10994 Contributed by pablomme@googlemail.com, coenraad@wish.org.za and a few others. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-228139x: reduce message severity on driver overlapStephen Hemminger
The 8139 drivers are a source of error messages that confuse users. Since this device can not be disambiguated by normal PCI device id's two drivers match the same info. But the module utilities seem to correctly handle this overlap, they try one driver, then if that doesn't load try the other. Therefore there is no need for a message to be logged with error level severity, just using info level instead. Can't be completely silent because user might have configure one driver and forgot the other one. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-22igb: add IGB_DCA instead of selecting INTEL_IOATDMAJeff Kirsher
Add a bool IGB_DCA defined to y if IGB and DCA are enabled, but IGB isn't y while DCA=m. And thus remove the need to select INTEL_IOATDMA when IGB is enabled, so that non-x86 architectures can build the igb driver. Based on work/patch from Brice Goglin <brice@myri.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-22igb: fix tx data corruption with transition to L0s on 82575Alexander Duyck
The 82575 has an issue in which the DMA will go out of sync if the link partner goes into an L0s state. To prevent this we set the pci-e link partner capability bits to disable the L0s transition on the hw. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-22ehea: Fix memory hotplug supportHannes Hering
This patch implements the memory notifier to update the busmap instantly instead of rebuilding the whole map. This is necessary because walk_memory_resource provides different information than required during memory hotplug. Signed-off-by: Hannes Hering <hering2@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-22netdev: DM9000: remove BLACKFIN hacking in DM9000 netdev driverBryan Wu
remove integer casting in the read/write IO accessors, because Blackfin now provides those functions Tested-by: Javier Herrero <jherrero@hvsistemas.es> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-22cxgb3: Fix kernel crash caused by uninitialized l2t_entry.arpqRoland Dreier
Commit 147e70e6 ("cxgb3: Use SKB list interfaces instead of home-grown implementation.") causes a crash in t3_l2t_send_slow() when an iWARP connection request is received. This is because the new l2t_entry.arpq skb queue is never initialized, and therefore trying to add an skb to it causes a NULL dereference. With the old code there was no need to initialize the queues because the l2t_entry structures were zeroed, and the code used NULL to mean empty. Fix this by adding __skb_queue_head_init() when all the l2t_entry structures get allocated. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-22SMC911x: unbreak PXA buildsDmitry Baryshkov
Currently SMC911x driver is broken on ARM/PXA builds. Unbreak such configurations. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-22myri10ge: disable NAPI on failure to setup the interfaceBrice Goglin
Disable NAPI if a failure occurs when setting up the interface. Leaving it enabled could cause a BUG the next time an ifconfig up is issued. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-22net: Make SMC91X selectable on other MIPS boardsAtsushi Nemoto
RBTX4939 board has SMC91X chip and there can be other MIPS boards with that chip. Make SMC91X selectable on all MIPS board would be better than enumerating each boards in Kconfig. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: jeff@garzik.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-22AX88796: ax_probe() fix irq assignmentroel kluin
dev->irq is unsigned Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-22gianfar: fix handle errors returned by platform_get_irq*()roel kluin
platform_get_irq*() returns on -ENXIO when the resource cannot be found, but this remains unnoticed if stored in an unsigned. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-22r8169: checks against wrong mac addresse initFrancois Romieu
Checking the signature of the eeprom and the validity of the MAC address should be enough to filter out the bad addresses observed so far. Contributed by Ivan Vecera and Martin Capitanio. Tested on 8102el, 8168b and 8169 for a start. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-22r8169: verbose mac address initFrancois Romieu
I prefer the debug information to be displayed until the issue is properly handled. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-21xtensa: Add support for the Sonic Ethernet device for the XT2000 board.Chris Zankel
Add support for the on-board Sonic Ethernet device for the XT2000 evaluation board. Signed-off-by: Chris Zankel <chris@zankel.net>
2008-10-21Merge commit 'origin' into masterBenjamin Herrenschmidt
Manual merge of: arch/powerpc/Kconfig arch/powerpc/include/asm/page.h
2008-10-21Merge commit 'gcl/gcl-next'Benjamin Herrenschmidt
2008-10-20ibm_newemac: Fix new MAL feature handlingJosh Boyer
Support for new features needed by the PPC 405EZ boards introduced some errors in the MAL and EMAC feature handling. This broke 'allmodconfig' builds as CONFIG_PPC_DCR_NATIVE is not set for those. This patch fixes these errors by wrapping the code in the appropriate #ifdefs. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-10-20misc: replace remaining __FUNCTION__ with __func__Harvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20Merge branch 'genirq-v28-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip This merges branches irq/genirq, irq/sparseirq-v4, timers/hpet-percpu and x86/uv. The sparseirq branch is just preliminary groundwork: no sparse IRQs are actually implemented by this tree anymore - just the new APIs are added while keeping the old way intact as well (the new APIs map 1:1 to irq_desc[]). The 'real' sparse IRQ support will then be a relatively small patch ontop of this - with a v2.6.29 merge target. * 'genirq-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (178 commits) genirq: improve include files intr_remapping: fix typo io_apic: make irq_mis_count available on 64-bit too genirq: fix name space collisions of nr_irqs in arch/* genirq: fix name space collision of nr_irqs in autoprobe.c genirq: use iterators for irq_desc loops proc: fixup irq iterator genirq: add reverse iterator for irq_desc x86: move ack_bad_irq() to irq.c x86: unify show_interrupts() and proc helpers x86: cleanup show_interrupts genirq: cleanup the sparseirq modifications genirq: remove artifacts from sparseirq removal genirq: revert dynarray genirq: remove irq_to_desc_alloc genirq: remove sparse irq code genirq: use inline function for irq_to_desc genirq: consolidate nr_irqs and for_each_irq_desc() x86: remove sparse irq from Kconfig genirq: define nr_irqs for architectures with GENERIC_HARDIRQS=n ...
2008-10-20Merge branch 'master' of ↵Paul Mundt
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: Documentation/kernel-parameters.txt arch/sh/include/asm/elf.h
2008-10-17USB: remove info() macro from usb network driversGreg Kroah-Hartman
USB should not be having it's own printk macros, so remove info() and use the system-wide standard of dev_info() wherever possible. Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: remove warn() macro from usb net driversGreg Kroah-Hartman
USB should not be having it's own printk macros, so remove warn() and use the system-wide standard of dev_warn() wherever possible. In the few places that will not work out, use a basic printk(). Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net: Remove CONFIG_KMOD from net/ (towards removing CONFIG_KMOD entirely) ipv4: Add a missing rcu_assign_pointer() in routing cache. [netdrvr] ibmtr: PCMCIA IBMTR is ok on 64bit xen-netfront: Avoid unaligned accesses to IP header lmc: copy_*_user under spinlock [netdrvr] myri10ge, ixgbe: remove broken select INTEL_IOATDMA
2008-10-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (46 commits) UIO: Fix mapping of logical and virtual memory UIO: add automata sercos3 pci card support UIO: Change driver name of uio_pdrv UIO: Add alignment warnings for uio-mem Driver core: add bus_sort_breadthfirst() function NET: convert the phy_device file to use bus_find_device_by_name kobject: Cleanup kobject_rename and !CONFIG_SYSFS kobject: Fix kobject_rename and !CONFIG_SYSFS sysfs: Make dir and name args to sysfs_notify() const platform: add new device registration helper sysfs: use ilookup5() instead of ilookup5_nowait() PNP: create device attributes via default device attributes Driver core: make bus_find_device_by_name() more robust usb: turn dev_warn+WARN_ON combos into dev_WARN debug: use dev_WARN() rather than WARN_ON() in device_pm_add() debug: Introduce a dev_WARN() function sysfs: fix deadlock device model: Do a quickcheck for driver binding before doing an expensive check Driver core: Fix cleanup in device_create_vargs(). Driver core: Clarify device cleanup. ...
2008-10-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: module: remove CONFIG_KMOD in comment after #endif remove CONFIG_KMOD from fs remove CONFIG_KMOD from drivers Manually fix conflict due to include cleanups in drivers/md/md.c
2008-10-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (26 commits) decnet: Fix compiler warning in dn_dev.c IPV6: Fix default gateway criteria wrt. HIGH/LOW preference radv option net/802/fc.c: Fix compilation warnings netns: correct mib stats in ip6_route_me_harder() netns: fix net_generic array leak rt2x00: fix regression introduced by "mac80211: free up 2 bytes in skb->cb" rtl8187: Add USB ID for Belkin F5D7050 with RTL8187B chip p54usb: Device ID updates mac80211: fixme for kernel-doc ath9k/mac80211: disallow fragmentation in ath9k, report to userspace libertas : Remove unused variable warning for "old_channel" from cmd.c mac80211: Fix scan RX processing oops orinoco: fix unsafe locking in spectrum_cs_suspend orinoco: fix unsafe locking in orinoco_cs_resume cfg80211: fix debugfs error handling mac80211: fix debugfs netdev rename iwlwifi: fix ct kill configuration for 5350 mac80211: fix HT information element parsing p54: Fix compilation problem on PPC mac80211: fix debugfs lockup ...
2008-10-16drivers/net/xen-netfront.c: Use DIV_ROUND_UPJulia Lawall
The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. An extract of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression n,d; @@ ( - (n + d - 1) / d + DIV_ROUND_UP(n,d) | - (n + (d - 1)) / d + DIV_ROUND_UP(n,d) ) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP((n),d) + DIV_ROUND_UP(n,d) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP(n,(d)) + DIV_ROUND_UP(n,d) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16Remove Andrew Morton's old email accountsFrancois Cami
People can use the real name an an index into MAINTAINERS to find the current email address. Signed-off-by: Francois Cami <francois.cami@free.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>