aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2009-10-02cnic: Fix NETDEV_UP event processing.Michael Chan
This fixes the problem of not handling the NETDEV_UP event properly during hot-plug or modprobe of bnx2 after cnic. The handling was skipped by mistakenly using "else if" to check for the event. Also update version to 2.0.1. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-02e1000e/igb/ixgbe: Don't report an error if devices don't support AERFrans Pop
The only error returned by pci_{en,dis}able_pcie_error_reporting() is -EIO which simply means that Advanced Error Reporting is not supported. There is no need to report that, so remove the error check from e1000e, igb and ixgbe. Signed-off-by: Frans Pop <elendil@planet.nl> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-02net: Fix wrong sizeofJean Delvare
Which is why I have always preferred sizeof(struct foo) over sizeof(var). Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-01sky2: irqname based on pci addressStephen Hemminger
This is based on Michal Schmidt fix for skge. Most network drivers request their IRQ when the interface is activated. sky2 does it in ->probe() instead, because it can work with two-port cards where the two net_devices use the same IRQ. This works fine most of the time, except in some situations when the interface gets renamed. Consider this example: 1. modprobe sky2 The card is detected as eth0 and requests IRQ 17. Directory /proc/irq/17/eth0 is created. 2. There is an udev rule which says this interface should be called eth1, so udev renames eth0 -> eth1. 3. modprobe 8139too The Realtek card is detected as eth0. It will be using IRQ 17 too. 4. ip link set eth0 up Now 8139too requests IRQ 17. The result is: WARNING: at fs/proc/generic.c:590 proc_register ... proc_dir_entry '17/eth0' already registered The fix is for sky2 to name the irq based on the pci device, as is done by some other devices DRM, infiniband, ... ie. sky2@pci:0000:00:00 Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-01skge: use unique IRQ nameMichal Schmidt
Most network drivers request their IRQ when the interface is activated. skge does it in ->probe() instead, because it can work with two-port cards where the two net_devices use the same IRQ. This works fine most of the time, except in some situations when the interface gets renamed. Consider this example: 1. modprobe skge The card is detected as eth0 and requests IRQ 17. Directory /proc/irq/17/eth0 is created. 2. There is an udev rule which says this interface should be called eth1, so udev renames eth0 -> eth1. 3. modprobe 8139too The Realtek card is detected as eth0. It will be using IRQ 17 too. 4. ip link set eth0 up Now 8139too requests IRQ 17. The result is: WARNING: at fs/proc/generic.c:590 proc_register ... proc_dir_entry '17/eth0' already registered ... And "ls /proc/irq/17" shows two subdirectories, both called eth0. Fix it by using a unique name for skge's IRQ, based on the PCI address. The naming from the example then looks like this: $ grep skge /proc/interrupts 17: 169 IO-APIC-fasteoi skge@pci:0000:00:0a.0, eth0 irqbalance daemon will have to be taught to recognize "skge@" as an Ethernet interrupt. This will be a one-liner addition in classify.c. I will send a patch to irqbalance if this change is accepted. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-01Kconfig: STRIP: Remove stale bits of STRIP help textRalf Baechle
Remove references to dead web site mosquitonet.Stanford.EDU. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-01NET: mkiss: Fix typoRalf Baechle
This typo was introduced by 5793f4be23f0171b4999ca68a39a9157b44139f3 on October 14, 2005 ... Reported-by: Matti Aarnio <matti.aarnio@zmailer.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-01tg3: Remove prev_vlan_tag from struct tx_ring_infoEric Dumazet
prev_vlan_tag field is not used. Patch saves 512*8 bytes per tx queue ring on 64bit arches. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Matthew Carlson <mcarlson@broadcom.com>
2009-10-01move virtnet_remove to .devexit.textUwe Kleine-König
The function virtnet_remove is used only wrapped by __devexit_p so define it using __devexit. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: David S. Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Alex Williamson <alex.williamson@hp.com> Cc: Mark McLoughlin <markmc@redhat.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-01don't use __devexit_p to wrap sgiseeq_removeUwe Kleine-König
The function sgiseeq_remove is defined using __exit, so don't use __devexit_p but __exit_p to wrap it. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: David S. Miller <davem@davemloft.net> Cc: Wang Chen <wangchen@cn.fujitsu.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Patrick McHardy <kaber@trash.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-01don't use __devexit_p to wrap meth_removeUwe Kleine-König
The function meth_remove is defined using __exit, so don't use __devexit_p but __exit_p to wrap it. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: David S. Miller <davem@davemloft.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Patrick McHardy <kaber@trash.net> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-01bonding: set primary param via sysfsJiri Pirko
Primary module parameter passed to bonding is pernament. That means if you release the primary slave and enslave it again, it becomes the primary slave again. But if you set primary slave via sysfs, the primary slave is only set once and it's not remembered in bond->params structure. Therefore the setting is lost after releasing the primary slave. This simple one-liner fixes this. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-01Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-10-01ixgbe: correct the parameter descriptionJiri Pirko
ccffad25b5136958d4769ed6de5e87992dd9c65c changed parameters for function ixgbe_update_uc_addr_list_generic but parameter description was not updated. This patch corrects it. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30be2net: Workaround to fix a bug in Rx Completion processing.Ajit Khaparde
vtp bit in RX completion descriptor could be wrongly set in some skews of BladEngine. Ignore this bit if vtm is not set. Resending because the previous patch was against net-next tree. This patch is against the net-2.6 tree. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-303c59x: Rework suspend and resumeAnton Vorontsov
As noticed by Alan Stern, there is still one issue with the driver: we disable PCI IRQ on suspend, but other devices on the same IRQ line might still need the IRQ enabled to suspend properly. Nowadays, PCI core handles all power management work by itself, with one condition though: if we use dev_pm_ops. So, rework the driver to only quiesce 3c59x internal logic on suspend, while PCI core will manage PCI device power state with IRQs disabled. Suggested-by: Rafael J. Wysocki <rjw@sisk.pl> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30drivers/net: ks8851_mll ethernet network driverChoi, David
This is the first registration of ks8851 network driver with MLL(address/data multiplexed) interface. Signed-off-by : David J. Choi <david.choi@micrel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30skge: Make sure both ports initialize correctlyMike McCormack
If allocation of the second ports fails, make sure that hw->ports is not 2 otherwise we'll crash trying to access the second port. This fix is copied from a similar fix in the sky2 driver (ca519274...), but is untested, as I don't have a skge card. Signed-off-by: Mike McCormack <mikem@ring3k.org> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30bcm63xx_enet: timeout off by one in do_mdio_op()roel kluin
`while (limit-- >= 0)' reaches -2 after the loop upon timeout. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30qlge: Fix error exit for probe call.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30qlge: Protect reset recovery with rtnl_lock().Ron Mercer
Move the call to rtnl_lock() to before the internal call to ql_adapter_down()/ql_adapter_up(). This prevents collisions that can happen when recovering from an asic error. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30qlge: Fix spin_lock warning.Ron Mercer
Remove the unnecessary locking around the call to ql_adapter_reset(). Sep 25 08:17:29 localhost kernel: SOFTIRQ-ON-W at: Sep 25 08:17:29 localhost kernel: [<c0000000000a2964>] .lock_acquire+0x10c/0x158 Sep 25 08:17:29 localhost kernel: [<c0000000004542e0>] ._spin_lock+0x34/0x58 Sep 25 08:17:29 localhost kernel: [<d000000006723070>] .ql_adapter_down+0x40c/0x4a0 [qlge] Sep 25 08:17:29 localhost kernel: [<d0000000067256d8>] .qlge_close+0x38/0x58 [qlge] Sep 25 08:17:29 localhost kernel: [<c0000000003ada6c>] .dev_close+0xdc/0x118 Sep 25 08:17:29 localhost kernel: [<c0000000003adb48>] .rollback_registered+0xa0/0x158 Sep 25 08:17:29 localhost kernel: [<c0000000003adc50>] .unregister_netdevice+0x50/0x7c Sep 25 08:17:29 localhost kernel: [<c0000000003adca0>] .unregister_netdev+0x24/0x40 Sep 25 08:17:29 localhost kernel: [<d00000000672e0c0>] .qlge_remove+0x28/0x64 [qlge] Sep 25 08:17:29 localhost kernel: [<c000000000253fdc>] .pci_device_remove+0x50/0x90 Sep 25 08:17:29 localhost kernel: [<c0000000002f5434>] .__device_release_driver+0x94/0xf8 Sep 25 08:17:29 localhost kernel: [<c0000000002f5560>] .driver_detach+0xc8/0xfc Sep 25 08:17:29 localhost kernel: [<c0000000002f3fd8>] .bus_remove_driver+0xb4/0x114 Sep 25 08:17:29 localhost kernel: [<c0000000002f5d4c>] .driver_unregister+0x80/0xa4 Sep 25 08:17:29 localhost kernel: [<c00000000025421c>] .pci_unregister_driver+0x50/0xc8 Sep 25 08:17:29 localhost kernel: [<d00000000672e044>] .qlge_exit+0x1c/0x34 [qlge] Sep 25 08:17:29 localhost kernel: [<c0000000000ac8b0>] .SyS_delete_module+0x234/0x2d0 Sep 25 08:17:29 localhost kernel: [<c000000000008554>] syscall_exit+0x0/0x40 Sep 25 08:17:29 localhost kernel: INITIAL USE at: Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30qlge: Fix out of sync hardware semaphore.Ron Mercer
ql_clear_routing_entries() takes/gives it's own hardware semaphore since it is called from more than one place. ql_route_initialize() should make this call and THEN take it's own semaphore before doing it's work. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30qlge: Fix bad bit definitions.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30ixgbe: Remove ATR computation for UDP trafficPeter P Waskiewicz Jr
ATR support for UDP on 82599 needs to be redesigned, since the current model doesn't make much sense. The fallout from having it in though is it causes all UDP traffic to still compute the ATR hashes on transmit, which are useless. This removal will return upwards of 10% of relative computational overhead in forwarding tests. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30ixgbe patch to provide NIC's tx/rx counters via ethtoolBen Greear
When LRO is enabled, the received packet and byte counters represent the LRO'd packets, not the packets/bytes on the wire. The Intel 82599 NIC has registers that keep count of the physical packets. Add these counters to the ethtool stats. The byte counters are 36-bit, but the high 4 bits were being ignored in the 2.6.31 ixgbe driver: Read those as well to allow longer time between polling the stats to detect wraps. Signed-off-by: Ben Greear <greearb@candelatech.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30ixgbe: Bump driver version numberPeter P Waskiewicz Jr
A number of changes have gone in since the last version bump. Bump it to reflect the changes. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30ixgbe: Fix backplane flow control autonegPeter P Waskiewicz Jr
Backplane flow control autonegotiation is currently broken for ixgbe devices. This patch fixes the flow control issues with clause 37 autoneg. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30ixgbe: Fix disabling of relaxed ordering with Tx DCAPeter P Waskiewicz Jr
82599 has a different register offset for the Tx DCA control registers. We disable relaxed ordering of the descriptor writebacks for Tx head writeback, but didn't disable it properly for 82599. However, this shouldn't be a visible issue, since ixgbe doesn't use Tx head writeback. This patch just makes sure we're not doing blind writes to offsets we don't expect. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30net: Make setsockopt() optlen be unsigned.David S. Miller
This provides safety against negative optlen at the type level instead of depending upon (sometimes non-trivial) checks against this sprinkled all over the the place, in each and every implementation. Based upon work done by Arjan van de Ven and feedback from Linus Torvalds. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-29ar9170: fix bug in iq-auto calibration value calculationChristian Lamparter
This patch fixes a embarrassing bug which was introduced by: "[PATCH] ar9170: implement frequency calibration for one-stage/openfw" The phy_data variable initialization has to done outside the for-loop scope. This is because the for-loop uses u32 phy_data variable more like a 4-byte field. But in each run only a single byte is calculated. Therefore phy_data content needs to stay the same for at least 3 more iterations, before the complete set can be uploaded. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-29rt2x00: Thrustmaster FunAccess WIFI USB and rt73usbMichal Szalata
Thrustmaster FunAccess WIFI USB works with rt73usb with little modification of rt73usb.c. Tested with version 2.3.0 of driver. Signed-off-by: Michal Szalata <szalat@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-29mac80211_hwsim: Fix initial beacon timer configurationJouni Malinen
mac80211_hwsim does not start transmitting Beacon frames when hostapd is started for the first time and restarting hostapd fixes this. The issue is caused by the config() handler not being able to start beacon_timer when beacon interval is not yet known and bss_info_changed() handler not starting the timer. This can be fixed by making the bss_info_changed() update the timer. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-29b43: Always use block-I/O for the PIO data registersMichael Buesch
On SDIO the PIO data register seems to be hardwired to LE. So the MACCTL bit has no effect on the endianness. So also use block-I/O for the last word of the packet. block-I/O is always LE. Signed-off-by: Michael Buesch <mb@bu3sch.de> Tested-by: Albert Herranz <albert_herranz@yahoo.es> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-28iwlwifi: fix 3945 ucode info retrieval after failureReinette Chatre
When hardware or uCode problem occurs driver captures significant information from device to enable debugging. The format of this information is different between 3945 and 4965 and later devices, yet currently the 3945 uses the 4965 and later format. Fix this by adding a new library call that is initialized to the correct formatting routine based on device. This moves the iwlagn event and error log handling back to iwl-agn.c to make it part of iwlagn module. Also remove the 3945 sysfs file that triggers dump of event log - there is already a debugfs file that can do it for all drivers. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-28iwlwifi: fix memory leak in command queue handlingReinette Chatre
Also free the array of command pointers and meta data of each command buffer when command queue is freed. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-28iwlwifi: fix debugfs buffer handlingReinette Chatre
We keep track of where to write into a buffer by keeping a count of how much has been written so far. When writing to the buffer we thus take the buffer pointer and adding the count of what has been written so far. Keeping track of what has been written so far is done by incrementing this number every time something is written to the buffer with how much has been written at that time. Currently this number is incremented incorrectly when using the "hex_dump_to_buffer" call to add data to the buffer. Fix this by only adding what has been added to the buffer in that call instead of what has been added since beginning of buffer. Issue was discovered and discussed during testing of https://bugzilla.redhat.com/show_bug.cgi?id=464598 . When a user views any of these files they will see something like: [ 179.355202] ------------[ cut here ]------------ [ 179.355209] WARNING: at ../lib/vsprintf.c:989 vsnprintf+0x5ec/0x5f0() [ 179.355212] Hardware name: VGN-Z540N [ 179.355213] Modules linked in: i915 drm i2c_algo_bit i2c_core ipv6 acpi_cpufreq cpufreq_userspace cpufreq_powersave cpufreq_ondemand cpufreq_conservative cpufreq_stats freq_table container sbs sbshc arc4 ecb iwlagn iwlcore joydev led_class mac80211 af_packet pcmcia psmouse sony_laptop cfg80211 iTCO_wdt iTCO_vendor_support pcspkr serio_raw rfkill intel_agp video output tpm_infineon tpm tpm_bios button battery yenta_socket rsrc_nonstatic pcmcia_core processor ac evdev ext3 jbd mbcache sr_mod sg cdrom sd_mod ahci libata scsi_mod ehci_hcd uhci_hcd usbcore thermal fan thermal_sys [ 179.355262] Pid: 5449, comm: cat Not tainted 2.6.31-wl-54419-ge881071 #62 [ 179.355264] Call Trace: [ 179.355267] [<ffffffff811ad14c>] ? vsnprintf+0x5ec/0x5f0 [ 179.355271] [<ffffffff81041348>] warn_slowpath_common+0x78/0xd0 [ 179.355275] [<ffffffff810413af>] warn_slowpath_null+0xf/0x20 [ 179.355277] [<ffffffff811ad14c>] vsnprintf+0x5ec/0x5f0 [ 179.355280] [<ffffffff811ad23d>] ? scnprintf+0x5d/0x80 [ 179.355283] [<ffffffff811ad23d>] scnprintf+0x5d/0x80 [ 179.355286] [<ffffffff811aed29>] ? hex_dump_to_buffer+0x189/0x340 [ 179.355290] [<ffffffff810e91d7>] ? __kmalloc+0x207/0x260 [ 179.355303] [<ffffffffa02a02f8>] iwl_dbgfs_nvm_read+0xe8/0x220 [iwlcore] [ 179.355306] [<ffffffff811a9b62>] ? __up_read+0x92/0xb0 [ 179.355310] [<ffffffff810f0988>] vfs_read+0xc8/0x1a0 [ 179.355313] [<ffffffff810f0b50>] sys_read+0x50/0x90 [ 179.355316] [<ffffffff8100bd6b>] system_call_fastpath+0x16/0x1b [ 179.355319] ---[ end trace 2383d0d5e0752ca0 ]--- Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-26e1000: cleanup unused prototypeDon Skidmore
The function e1000_enable_tx_pkt_filtering() was removed in a previous cleanup patch. this removes the no longer used prototype. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: fix namespacecheck warningsJesse Brandeburg
a couple of functions needed to be removed/declared static Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: drop unused functionality for eeprom write/readJesse Brandeburg
eerd and eewr don't exist on pre PCIe devices Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: updated whitespace and commentsJesse Brandeburg
A large whitespace change to e1000_hw.[ch] in order to update it to kernel coding style (by running lindent). Updated function header comments into kdoc style. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: drop redunant line of code, cleanupJesse Brandeburg
adapter was being assigned twice, also clarified variable name and unwrapped line. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: remove races when changing mtuJesse Brandeburg
this patch fixes a bug that occurs when routing packets and simultaneously changing the mtu. the rx_buffer_len variable is used during the rx cleanup and if that changes on the fly without stopping traffic bad things happen Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: two workarounds were incomplete, fix themJesse Brandeburg
1) 82544 does not need last_tx_tso workaround, it interferes with the 82544 workaround too 2) 82544 hang workaround was using the address of the page struct instead of the physical address as its "workaround decider" not sure how that ever worked Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: fix tx waking queue after queue stopped during shutdownJesse Brandeburg
This fix closes a race where the adapter can be shutting down while hard_start_xmit is being called and interrupts are being handled. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: test link state conclusivelyJesse Brandeburg
e1000 was using one particular way to detect link, but with the advent of some of the newer hardware designs using SERDES connections, tests for link must completely cover all cases. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: stop timers at appropriate timesJesse Brandeburg
there were some hotplug cases that made timers still run after the driver had been removed, make sure to stop all the timers and not allow racy reschedules. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: use netif_tx_disableJesse Brandeburg
we can use netif_tx_disable now because LLTX has been removed. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: remove unused functionsJesse Brandeburg
after removal of pcie, need to remove some unnecessary functions Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: drop dead pcie code from e1000Jesse Brandeburg
this patch is the first in a series of clean up patches for e1000 to drop unused code, and update the driver to kernel spec, and then, to update the driver to have all available bug fixes. Call it the e1000 weight loss plan. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-06 00:44:02 +0000