aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2008-09-08iwlwifi: remove obsolete 4965 forward declarationsRon Rindjunsky
This patch removes unused forward declarations functions. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: clean up hw scan handlerTomas Winkler
This patch cleans up iwl_mac_hw_scan handler. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi : Added bss_info_changed callback to 3945Abhijeet Kolekar
Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08p54: better firmware supportChristian Lamparter
This patch hopefully contains all necessary changes to support firmwares for all devices up to atleast 2.13.3.0. (or: LowerMAC Protocol Rev: 5.5 ) And this is a big win, since: * newer firmwares are more stable and reliable than the old ones. * no problems anymore with packages > 1399 octets (without lowering the MTU). * monitor mode finally works on USB for more than just a few seconds. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08p54: set_filter refactoringChristian Lamparter
p54_set_filter has a way too many unnecessary "magic" parameters and values. This patch axes all superfluous parameters and gives most of the magic values appropriate names. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08b43: Replace hardcoded Analog switchMichael Buesch
Replace a hardcoded Analog switch (which breaks on N-PHY) by a call to the switch_analog PHY operation. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08b43: Move Analog switching into phy codeMichael Buesch
This moves the Analog switching code into the PHY files. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05p54usb: support LM87 firmwaresChristian Lamparter
This patch adds the necessary changes to support LM87 firmwares. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05ath9k: uses/needs led_classdev_[un]registerRandy Dunlap
ath9k uses LED classdev functions, so it needs to either select or depend on them. This patch uses the same selects that ath5k uses... drivers/built-in.o: In function `ath_unregister_led': main.c:(.text+0x138c1d): undefined reference to `led_classdev_unregister' drivers/built-in.o: In function `ath_register_led': main.c:(.text+0x139c16): undefined reference to `led_classdev_register' make[1]: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> cc: Jouni Malinen <jmalinen@atheros.com> Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05b43: Split PHY alloc and initMichael Buesch
This splits the PHY allocation from the PHY init. This is needed in order to properly support Analog handling. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05p54: move eeprom code into common libraryChristian Lamparter
Both p54pci and p54usb uses a good chunk of device specific code to get the data from the device's eeprom into the drivers memory. So, this patch reduces the code size and will it make life easier if someone wants to implement ethtool eeprom dumping features. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05p54: enhance firmware parser to reduce memory wasteChristian Lamparter
This patch greatly reduces one of biggest memory waste in the driver. The firmware headers provides the right values for extra head-/tailroom and mtu size which are usually much lower than the old hardcoded ones. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05p54pci: increase ring buffer index counter when skippingChristian Lamparter
I'm afraid, I forgot to add the following lines to 7262d59366 ("p54pci: rx tasklet refactoring"). These changes are necessary to ensure loop termination. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05b43: Add LP-PHY radio register definitionsMichael Buesch
This adds definitions for the LP-PHY radios. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05b43: Add LP-PHY read/write phyopsMichael Buesch
This adds read/write phyops for the LP-PHY and LP-PHY radios. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05b43: Add LP-PHY templateMichael Buesch
This adds template code for the LP-PHY. No actual functionality is implemented. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05b43: Move code from nphy.* to phy_n.*Michael Buesch
Sourcecode files for PHY code are named by phy_XXX.{c,h} where XXX is the PHY type. Move the N-PHY code to match the other files. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05b43: Move remaining code from phy.c to phy_a.cMichael Buesch
This moves the remaining code from phy.c to phy_a.c phy.c is removed. No functional change. Just moving code and removing dead code. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05cfg80211: keep track of supported interface modesLuis R. Rodriguez
It is obviously good for userspace to know up front which interface modes a given piece of hardware might support (even if adding such an interface might fail later because of concurrency issues), so let's make cfg80211 aware of that. For good measure, disallow adding interfaces in all other modes so drivers don't forget to announce support for one mode when they add it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Stephen Blackheath <tramp.enshrine.stephen@blacksapphire.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05ath5k: HW code cleanupNick Kossifidis
* No code changes... * Split hw.c to multiple files for better maintenance and add some documentation on each file code is going to grow soon (eeprom.c for example is going to get much stuff currently developed on ath_info) so it's better this way. * Rename following functions to maintain naming scheme: ah_setup_xtx_desc -> ah_setup_mrr_tx_desc (Because xtx doesn't say much, it's actually a multi-rate-retry tx descriptor) ath5k_hw_put_tx/rx_buf - > ath5k_hw_set_tx/rxdp ath5k_hw_get_tx/rx_buf -> ath5k_hw_get_tx/rxdp (We don't put any "buf" we set descriptor pointers on hw) ath5k_hw_tx_start -> ath5k_hw_start_tx_dma ath5k_hw_start_rx -> ath5k_hw_start_rx_dma ath5k_hw_stop_pcu_recv -> ath5k_hw_stop_rx_pcu (It's easier this way to identify them, we also have ath5k_hw_start_rx_pcu which completes the set) ath5k_hw_set_intr -> ath5k_hw_set_imr (As in get_isr we set imr here, not "intr") * Move ath5k_hw_setup_rx_desc on ah->ah_setup_rx_desc so we can include support for different rx descriptors in the future * Further cleanups so that checkpatch doesn't complain (only some > 80 col warnings for eeprom.h and reg.h as usual due to comments) Tested on 5211 and 5213 cards and works ok. Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05b43: Don't use memcpy for overlapping areasMichael Buesch
It is valid to pass &gphy->rfatt and &gphy->bbatt as rfatt and bbatt pointer arguments to the function. So we have to use memmove for the possibly overlapping memory areas. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-03s2io: reindented misleading for loopIlpo Järvinen
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03[netdrvr] removed unused #include <version.h>Huang Weiyi
The drivers below do not use LINUX_VERSION_CODE nor KERNEL_VERSION. drivers/net/myri10ge/myri10ge.c drivers/net/netxen/netxen_nic_ethtool.c drivers/net/tokenring/lanstreamer.c This patch removes the said #include <version.h>. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-038139too: use netdev_alloc_skbKevin Lo
This patch uses netdev_alloc_skb. This sets skb->dev and allows arch specific allocation. Also cleanup the alignment code. Signed-off-by: Kevin Lo <kevlo@kevlo.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-038139cp: use netdev_alloc_skbKevin Lo
This patch uses netdev_alloc_skb. This sets skb->dev and allows arch specific allocation. Also cleanup the alignment code. Signed-off-by: Kevin Lo <kevlo@kevlo.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03via-rhine: changed to use netdev_alloc_skb() from dev_alloc_skbKevin Lo
Use netdev_alloc_skb. This sets skb->dev and allows arch specific allocation. Also cleanup the alignment code. Signed-off-by: Kevin Lo <kevlo@kevlo.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03sky2: display product info on boot.Stephen Hemminger
Change bootup messages to print more information. This is to help users who may have old buggy EEPROM image. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03sky2: EEPROM read/write bug fixesStephen Hemminger
Cleanup and harden the routines accessing the EEPROM. 1. Prevent spin forever waiting for the TWSI bus 2. Fix write eeprom to write full words rather than only 16 bits Luckly the vendor doesn't provide EEPROM in Linux format so it must never have been used. 3. Don't allow partial eeprom writes, not needed, not safe. These are non-urgent bug fixes. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03Merge branch 'r8169-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/romieu/netdev-2.6 into upstream-next
2008-09-03ixgbe: change config srrctl to only program one register per VMDq/RSS idAlexander Duyck
This change makes it so only one srrctl register is programmed per VMDq id, and if VMDq is not enabled it is one register per RSS queue. Currently this function is working correctly for the multiqueue RSS and single queue cases, but if any advances features such as VMDq or DCB would have been enabled this function would have caused issues as it was not correct. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03igb: clean up a stray fake netdev code left in rx pathAlexander Duyck
Remove code that was in place to support fake netdev Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03igb: remove unneeded cleaned variable in clean_tx_irq pathAlexander Duyck
The cleaned variable can be replaced by the count of packets cleaned during the tx interrupt routine so it can be removed. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03e1000e: add support for new 82574L partBruce Allan
This new part has the same feature set as previous parts with the addition of MSI-X support. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03e1000e: add support for 82567LM-3 and 82567LF-3 (ICH10D) partsBruce Allan
Add support for new LOM devices on the latest generation ICHx platforms. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03e1000e: add support for the 82567LM-4 deviceBruce Allan
Enable PCI device ID for a new combination of MAC and PHY already supported in the driver. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03ixgbe: use different context for tso and offloadPJ Waskiewicz
Change TSO offloads to use a different context than VLAN insertion and Tx checksumming. Hardware has separate registers internally for storing these so use them. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03ixgbe: fix dca hints going to wrong processorJesse Brandeburg
hardware was configured incorrectly which led all hints to be sent to queue[0]'s DCA configuration. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03ixgbe: fix bug where lro settings are per ringJesse Brandeburg
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03ixgbe: update dca to new interface, fix CONFIG_DCA_MODULEJesse Brandeburg
DCA related fixes ================= - ixgbe was not compiling and using DCA correctly if dca was a module - DCA interface changed with new kernel - ixgbe was not correctly configured to indicate DCA hints to the correct CPU. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03ixgbe: should not use HW_CSUM, should use IP* flagsJesse Brandeburg
as mentioned by Herbert, our hardware supports IP offloads, not full checksum offloads for any protocol in existence (even though the hardware just provides generic csum support over any range of bytes) Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03ixgbe: Lock RSS seed, move rx_buf_len to the rx_ringJesse Brandeburg
This locks the seed down so loading/unloading the driver will present predictable hashing from RSS. Also move the rx_buf_len out of the adapter struct, and into the Rx ring struct. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03ixgbe: Implement Tx Head WritebackJesse Brandeburg
Enable Tx Head Writeback in the hardware. This helps performance by removing adapter writebacks to descriptors on transmit completion. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03ixgbe: disable flow control by defaultJesse Brandeburg
Since the adapter cannot tell what the remote end's flow control capability is through auto-neg, we must turn off flow control by default. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03ixgbe: Cleanup references to Tx and Rx rings to becommon across the driverJesse Brandeburg
Cleanup all the different references to the Tx ring and Rx ring structures and make them common across the driver. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03ixgbe: do not update stats twice each receiveJesse Brandeburg
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03ixgbe: Implement HAVE_SET_RX_MODEChristopher Leech
Implement HAVE_SET_RX_MODE in the driver for MC and UC lists. Signed-off-by: Christopher Leech <christopher.leech@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03ixgbe: add little endian annotations for sparseJesse Brandeburg
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03ixgbe: fix rx csum return status misinterpretationJesse Brandeburg
the driver was misinterpreting rx_csum return value in the descriptor so occassionally we would indicate an rx_csum error in our stats when there was none. This would have no effect on traffic because we would just hand the packet to the stack anyway without the offload flag set, but would increase CPU for those packets that needed a recompute. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03ibm_newemac: MAL[12]_IER_EVENTS definition: 2x *_OTE -> *_DEroel kluin
MAL[12]_IER_EVENTS definitions have MAL_IER_OTE twice but lack MAL_IER_DE Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03hp-plus: fix link objectsRandy Dunlap
Fix hp-plus Makefile object file: drivers/built-in.o: In function `hpp_open': hp-plus.c:(.text+0xaf445): undefined reference to `ei_interrupt' hp-plus.c:(.text+0xaf4ac): undefined reference to `ei_open' drivers/built-in.o: In function `hpp_close': hp-plus.c:(.text+0xaf59d): undefined reference to `ei_close' drivers/built-in.o: In function `hpp_probe1': hp-plus.c:(.init.text+0x7314): undefined reference to `ei_poll' drivers/built-in.o: In function `hp_plus_probe': (.init.text+0x7407): undefined reference to `__alloc_ei_netdev' make[1]: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 13:00:08 +0000