aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2008-09-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IPoIB: Fix deadlock on RTNL between bcast join comp and ipoib_stop() RDMA/nes: Fix client side QP destroy IB/mlx4: Fix up fast register page list format mlx4_core: Set RAE and init mtt_sz field in FRMR MPT entries
2008-09-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: e100: Use pci_pme_active to clear PME_Status and disable PME# e1000: prevent corruption of EEPROM/NVM forcedeth: call restore mac addr in nv_shutdown path bnx2: Promote vector field in bnx2_irq structure from u16 to unsigned int sctp: Fix oops when INIT-ACK indicates that peer doesn't support AUTH sctp: do not enable peer features if we can't do them. sctp: set the skb->ip_summed correctly when sending over loopback. udp: Fix rcv socket locking
2008-09-18e100: Use pci_pme_active to clear PME_Status and disable PME#Rafael J. Wysocki
Currently e100 uses pci_enable_wake() to clear pending wake-up events and disable PME# during intitialization, but that function is not suitable for this purpose, because it immediately returns error code if device_may_wakeup() returns false for given device. Make e100 use pci_pme_active(), which carries out exactly the required operations, instead. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-18e1000: prevent corruption of EEPROM/NVMChristopher Li
Andrey reports e1000 corruption, and that a patch in vmware's ESX fixed it. The EEPROM corruption is triggered by concurrent access of the EEPROM read/write. Putting a lock around it solve the problem. [akpm@linux-foundation.org: use DEFINE_SPINLOCK to avoid confusing lockdep] Signed-off-by: Christopher Li <chrisl@vmware.com> Reported-by: Andrey Borzenkov <arvidjaar@mail.ru> Cc: Zach Amsden <zach@vmware.com> Cc: Pratap Subrahmanyam <pratap@vmware.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com> Cc: John Ronciak <john.ronciak@intel.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-18forcedeth: call restore mac addr in nv_shutdown pathYinghai Lu
after | commit f735a2a1a4f2a0f5cd823ce323e82675990469e2 | Author: Tobias Diedrich <ranma+kernel@tdiedrich.de> | Date: Sun May 18 15:02:37 2008 +0200 | | [netdrvr] forcedeth: setup wake-on-lan before shutting down | | When hibernating in 'shutdown' mode, after saving the image the suspend hook | is not called again. | However, if the device is in promiscous mode, wake-on-lan will not work. | This adds a shutdown hook to setup wake-on-lan before the final shutdown. | | Signed-off-by: Tobias Diedrich <ranma+kernel@tdiedrich.de> | Signed-off-by: Jeff Garzik <jgarzik@redhat.com> my servers with nvidia ck804 and mcp55 will reverse mac address with kexec. it turns out that we need to restore the mac addr in nv_shutdown(). [akpm@linux-foundation.org: fix typo in printk] Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Tobias Diedrich <ranma+kernel@tdiedrich.de> Cc: Ayaz Abdulla <aabdulla@nvidia.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-18bnx2: Promote vector field in bnx2_irq structure from u16 to unsigned intBenjamin Li
The bnx2 driver stores/uses the irq value from the pci_dev internally. But when it stores the irq value, it has been performing an integer demotion. Because of the recent changes made to arch/x86/kernel/io_apic.c, the new method in creating the irq value (using build_irq_for_pci_dev()) has exposed this bug on x86 systems. Because of this demotion when calling request_irq() from bnx2_request_irq(), the driver would get a return code of -EINVAL. This is because the kernel could not find the requested irq descriptor. By storing the irq value properly, the kernel can find the correct irq descriptor and the bnx2 driver can operate normally. Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-16hpplus: fix build regressionStephen Hemminger
This fixes kernel regression for 2.6.27-rc in http://bugzilla.kernel.org/show_bug.cgi?id=11547 The change to split 8390 into old isa and non-isa versions overlooked this driver. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-16Revert "b43/b43legacy: add RFKILL_STATE_HARD_BLOCKED support"Linus Torvalds
This reverts commit bc19d6e0b74ef03a3baf035412c95192b54dfc6f, which as Larry Finger reports causes the radio LED on his system to no longer respond to rfkill switch events. Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Requested-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-15IB/mlx4: Fix up fast register page list formatVladimir Sokolovsky
Byte swap the addresses in the page list for fast register work requests to big endian to match what the HCA expectx. Also, the addresses must have the "present" bit set so that the HCA knows it can access them. Otherwise the HCA will fault the first time it accesses the memory region. Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-12niu: panic on resetSantwona Behera
The reset_task function in the niu driver does not reset the tx and rx buffers properly. This leads to panic on reset. This patch is a modified implementation of the previously posted fix. Signed-off-by: Santwona Behera <santwona.behera@sun.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-11ath9k: Assign seq# when mac80211 requests thisJouni Malinen
Use TX control flag IEEE80211_TX_CTL_ASSIGN_SEQ as a request to update the seq# for the frames. This will likely require some further cleanup to get seq# correctly for Beacons vs. other frames and also potentially for multiple BSSes. Anyway, this is better than ending up sending out most frames with seq# 0. (This is a backport of patch w/ same title already in net-next-2.6. It is verified to fix http://bugzilla.kernel.org/show_bug.cgi?id=11394 and it should be acceptable for -rc due to the driver being new in 2.6.27.) Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05forcedeth: fix kexec regressionRafael J. Wysocki
Fix regression tracked as http://bugzilla.kernel.org/show_bug.cgi?id=11361 and caused by commit f735a2a1a4f2a0f5cd823ce323e82675990469e2 ("[netdrvr] forcedeth: setup wake-on-lan before shutting down") that makes network adapters integrated into the NVidia MCP55 chipsets fail to work in kexeced kernels. The problem appears to be that if the adapter is put into D3_hot during ->shutdown(), it cannot be brought back into D0 after kexec (ref. http://marc.info/?l=linux-kernel&m=121900062814967&w=4). Therefore, only put forcedeth into D3 during ->shutdown() if the system is to be powered off. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Ayaz Abdulla <aabdulla@nvidia.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: bnx2x: Accessing un-mapped page ath9k: Fix TX control flag use for no ACK and RTS/CTS ath9k: Fix TX status reporting iwlwifi: fix STATUS_EXIT_PENDING is not set on pci_remove iwlwifi: call apm stop on exit iwlwifi: fix Tx cmd memory allocation failure handling iwlwifi: fix rx_chain computation iwlwifi: fix station mimo power save values iwlwifi: remove false rxon if rx chain changes iwlwifi: fix hidden ssid discovery in passive channels iwlwifi: W/A for the TSF correction in IBSS netxen: Remove workaround for chipset quirk pcnet-cs, axnet_cs: add new IDs, remove dup ID with less info ixgbe: initialize interrupt throttle rate net/usb/pegasus: avoid hundreds of diagnostics tipc: Don't use structure names which easily globally conflict.
2008-09-03Merge branch 'davem-fixes' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2008-09-03bnx2x: Accessing un-mapped pageEilon Greenstein
The allocated RX buffer size was 64 bytes bigger than the PCI mapped size with no good reason. If the packet was actually using the buffer up to its limit and if the last 64 bytes of the buffer crossed 4KB boundary then an unmapped PCI page was accessed. The fix is to use only one parameter for the buffer size - there is no need to differentiate between the buffer size and the PCI mapping size since the extra 64 bytes can actually be used by the FW to align the Ethernet payload to 64 bytes. Also updating the driver version and date Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-03ath9k: Fix TX control flag use for no ACK and RTS/CTSJouni Malinen
Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-03ath9k: Fix TX status reportingJouni Malinen
Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-03iwlwifi: fix STATUS_EXIT_PENDING is not set on pci_removeGregory Greenman
This patch sets STATUS_EXIT_PENDING on pci_remove. Otherwise iwl4965_down may fail to uninitialize the driver. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-03iwlwifi: call apm stop on exitGregory Greenman
This patch calls apm stop on exit and suspend. Without this patch hardware consumes power even after driver is removed or suspended. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-03iwlwifi: fix Tx cmd memory allocation failure handlingTomas Winkler
This patch "iwlwifi: do not use GFP_DMA in iwl_tx_queue_init" removes GFP_DMA from allocation tx command buffers. GFP_DMA allows allocation only for memory under 16M which causes allocation problems suspend/resume flows. Using kmalloc is temporal solution and some consistent/coherent allocation schema will be more correct. Since iwlwifi hardware supports 64bit address this solution should work on x86 (32 and 64bit) for now. This patch fixes memory freeing problem in the previous patch. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Ian Schram <ischram@telenet.be> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-03iwlwifi: fix rx_chain computationTomas Winkler
This patch fixes rx_chain computation. The code that adjusts number of rx chains to number supported by HW was missing. Miss configuration causes firmware error. Note: iwlwifi supports HW with up to 3 RX chains (2x2, 2x3, 1x2, and 3x3 MIMO). This patch also simplifies the whole RX chain computation. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-03iwlwifi: fix station mimo power save valuesRon Rindjunsky
This patch fixes the wrong use MIMO power save values. Our TX was configured with our MIMO power save values instead of peer's MIMO power save values, this may affect connectivity. The peer STA/AP may not sense our traffic at all as it doesn't have all RX chains opened. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-03iwlwifi: remove false rxon if rx chain changesMohamed Abbas
Rx chain might change during power save transitions but it doesn't require sending Full-ROXN command to the firmware. Full-RXON requires reconnection to an AP and thus affects user experience. The patch avoids the Full-RXON by removing the rx_chain modification check in iwl_full_rxon_required function. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-03iwlwifi: fix hidden ssid discovery in passive channelsRon Rindjunsky
This enables sending of direct probes on passive channels, as long as traffic was detected on that channel. This enables connectivity to hidden/non broadcasting SSIDs APs on passive channels. Note 5000 HW declares all 5.2 spectrum as passive. Signed-off-by: Cahill Ben <ben.m.cahill@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-03iwlwifi: W/A for the TSF correction in IBSSAssaf Krauss
This patch is a W/A for the TSF sync issue in IBSS merging. HW is not capable to sync TSF (it's constantly little behind). This creates constant IBSS merging upon reception of each beacon, adding and removing station which in turn creates above 50% packet loss and thus dramatically degrade the throughput. The W/A simply stops the driver from declaring it has a reliable TSF value and thus eliminates IBSS merging. Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-03netxen: Remove workaround for chipset quirkDhananjay Phadke
Remove chipset-specific quirk workaround; the workaround caused unrecoverable DMA lockups when the driver was loaded following a PXE boot. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Michael Brown <mbrown@fensystems.co.uk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03pcnet-cs, axnet_cs: add new IDs, remove dup ID with less infoKomuro
pcnet_cs: add new ID: "corega Ether PCC-TD". remove duplicate ID: "IC-CARD". axnet_cs: add new ID: "IO DATA ETXPCM". Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03ixgbe: initialize interrupt throttle rateAndy Gospodarek
This commit dropped the setting of the default interrupt throttle rate. commit 021230d40ae0e6508d6c717b6e0d6d81cd77ac25 Author: Ayyappan Veeraiyan <ayyappan.veeraiyan@intel.com> Date: Mon Mar 3 15:03:45 2008 -0800 ixgbe: Introduce MSI-X queue vector code The following patch adds it back. Without this the default value of 0 causes the performance of this card to be awful. Restoring these to the default values yields much better performance. This regression has been around since 2.6.25. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: stable@kernel.org [2.6.25 and later] Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03net/usb/pegasus: avoid hundreds of diagnosticsDavid Brownell
Make the "pegasus" driver scream less loudly in the face of problems as it initializes, avoiding hundreds of messages: - ratelimit some key error messages - avoid some spurious diagnostics caused by strange codeflow And fix one instance of goofy indentation. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: ipsec: Fix deadlock in xfrm_state management. ipv: Re-enable IP when MTU > 68 net/xfrm: Use an IS_ERR test rather than a NULL test ath9: Fix ath_rx_flush_tid() for IRQs disabled kernel warning message. ath9k: Incorrect key used when group and pairwise ciphers are different. rt2x00: Compiler warning unmasked by fix of BUILD_BUG_ON mac80211: Fix debugfs union misuse and pointer corruption wireless/libertas/if_cs.c: fix memory leaks orinoco: Multicast to the specified addresses iwlwifi: fix 64bit platform firmware loading iwlwifi: fix apm_stop (wrong bit polarity for FLAG_INIT_DONE) iwlwifi: workaround interrupt handling no some platforms iwlwifi: do not use GFP_DMA in iwl_tx_queue_init net/wireless/Kconfig: clarify the description for CONFIG_WIRELESS_EXT_SYSFS net: Unbreak userspace usage of linux/mroute.h pkt_sched: Fix locking of qdisc_root with qdisc_root_sleeping_lock() ipv6: When we droped a packet, we should return NET_RX_DROP instead of 0
2008-09-02ath9: Fix ath_rx_flush_tid() for IRQs disabled kernel warning message.Senthil Balasubramanian
This patch addresses an issue with the locking order. ath_rx_flush_tid() uses spin_lock/unlock_bh when IRQs are disabled in sta_notify by mac80211. As node clean up is still pending with ath9k and this problematic portion of the code is expected to change anyway, thinking of a proper fix may not be worthwhile. So having this interim fix helps the users to get rid of the kernel warning message. Pasted the kernel warning message for reference. kernel: ath0: No ProbeResp from current AP 00:1b:11:60:7a:3d - assume out of range kernel: ------------[ cut here ]------------ kernel: WARNING: at kernel/softirq.c:136 local_bh_enable+0x3c/0xab() kernel: Pid: 1029, comm: ath9k Not tainted 2.6.27-rc4-wt-w1fi-wl kernel: kernel: Call Trace: kernel: [<ffffffff802278d8>] warn_on_slowpath+0x51/0x77 kernel: [<ffffffff80224c51>] check_preempt_wakeup+0xf3/0x123 kernel: [<ffffffff80239658>] autoremove_wake_function+0x9/0x2e kernel: [<ffffffff8022c281>] local_bh_enable+0x3c/0xab kernel: [<ffffffffa01ab75a>] ath_rx_node_cleanup+0x38/0x6e [ath9k] kernel: [<ffffffffa01b2280>] ath_node_detach+0x3b/0xb6 [ath9k] kernel: [<ffffffffa01ab09f>] ath9k_sta_notify+0x12b/0x165 [ath9k] kernel: [<ffffffff802366cf>] queue_work+0x1d/0x49 kernel: [<ffffffffa018c3fc>] add_todo+0x70/0x99 [mac80211] kernel: [<ffffffffa017de76>] __sta_info_unlink+0x16b/0x19e [mac80211] kernel: [<ffffffffa017e6ed>] sta_info_unlink+0x18/0x43 [mac80211] kernel: [<ffffffffa0182732>] ieee80211_associated+0xaa/0x16d [mac80211] kernel: [<ffffffffa0184a1a>] ieee80211_sta_work+0x4fb/0x6b4 [mac80211] kernel: [<ffffffff80469c58>] thread_return+0x30/0xa9 kernel: [<ffffffffa018451f>] ieee80211_sta_work+0x0/0x6b4 [mac80211] kernel: [<ffffffff802362c2>] run_workqueue+0xb1/0x17a kernel: [<ffffffff80236be9>] worker_thread+0xd0/0xdb kernel: [<ffffffff8023964f>] autoremove_wake_function+0x0/0x2e kernel: [<ffffffff80236b19>] worker_thread+0x0/0xdb kernel: [<ffffffff8023954a>] kthread+0x47/0x75 kernel: [<ffffffff80223121>] schedule_tail+0x18/0x50 kernel: [<ffffffff8020bc49>] child_rip+0xa/0x11 kernel: [<ffffffff80239503>] kthread+0x0/0x75 kernel: [<ffffffff8020bc3f>] child_rip+0x0/0x11 kernel: kernel: ---[ end trace e9bb5da661055827 ]--- Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-02ath9k: Incorrect key used when group and pairwise ciphers are different.Senthil Balasubramanian
Updating sc_keytype multiple times when groupwise and pairwise ciphers are different results in incorrect pairwise key type assumed for TX control and normal ping fails. This works fine for cases where both groupwise and pairwise ciphers are same. Also use mac80211 provided enums for key length calculation. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-02rt2x00: Compiler warning unmasked by fix of BUILD_BUG_ONBoaz Harrosh
A "Set" to a sign-bit in an "&" operation causes a compiler warning. Make calculations unsigned. [ The warning was masked by the old definition of BUILD_BUG_ON() ] Also remove __builtin_constant_p from FIELD_CHECK since BUILD_BUG_ON no longer permits non-const values. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> CC: Ingo Molnar <mingo@elte.hu> CC: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-02wireless/libertas/if_cs.c: fix memory leaksAdrian Bunk
The leak in if_cs_prog_helper() is obvious. It looks a bit as if not freeing "fw" in if_cs_prog_real() was done intentionally, but I'm not seeing why it shouldn't be freed. Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-02orinoco: Multicast to the specified addressesDavid Kilroy
When multicasting the driver sets the number of group addresses using the count from the previous set multicast command. In general this means you have to set the multicast addresses twice to get the behaviour you want. If we were multicasting, and reduce the number of addresses we are multicasting to, then the driver would write uninitialised data from the stack into the group addresses to multicast to. Only write the multicast addresses we have specifically set. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-02iwlwifi: fix 64bit platform firmware loadingTomas Winkler
This patch fixes loading firmware from memory above 32bit. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Acked-by: Marcel Holtmann <holtmann@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-02iwlwifi: fix apm_stop (wrong bit polarity for FLAG_INIT_DONE)Mohamed Abbas
The patch fixes CSR_GP_CNTRL_REG_FLAG_INIT_DONE was set instead of cleared which disabled moving device to D0U state. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-02iwlwifi: workaround interrupt handling no some platformsTomas Winkler
This patch adds workaround for an interrupt related hardware bug on some platforms. (Apparently these platforms boot-up w/ INTX_DISABLED set. -- JWL) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-02mlx4_core: Set RAE and init mtt_sz field in FRMR MPT entriesVladimir Sokolovsky
Set the RAE (remote access enable) bit and correctly initialize the MTT size in MPT entries being set up for fast register memory regions. Otherwise the callers can't enable remote access and in fact can't fast register at all (since the HCA will think no MTT entries are allocated). Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-02iwlwifi: do not use GFP_DMA in iwl_tx_queue_initJohn W. Linville
GFP_DMA is not necessary for the iwlwifi hardware and it can cause allocation failures and/or invoke the OOM killer on lots of systems. For reference: https://bugzilla.redhat.com/show_bug.cgi?id=459709 Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (55 commits) sctp: fix random memory dereference with SCTP_HMAC_IDENT option. sctp: correct bounds check in sctp_setsockopt_auth_key wan: Missing capability checks in sbni_ioctl() e100, fix iomap read qeth: preallocated header account offset qeth: l2 write unicast list to hardware qeth: use -EOPNOTSUPP instead of -ENOTSUPP. ibm_newemac: Don't call dev_mc_add() before device is registered net: don't grab a mutex within a timer context in gianfar forcedeth: fix checksum flag net/usb/mcs7830: add set_mac_address net/usb/mcs7830: new device IDs [netdrvr] smc91x: fix resource removal (null ptr deref) ibmveth: fix bad UDP checksums [netdrvr] hso: dev_kfree_skb crash fix [netdrvr] hso: icon 322 detection fix atl1: disable TSO by default atl1e: multistatement if missing braces igb: remove 82576 quad adapter drivers/net/skfp/ess.c: fix compile warnings ...
2008-08-27e1000: fix stack sizeLinus Torvalds
Here's the patch. It shrinks the stack from 1152 bytes to 192 bytes (the first version, that only did the e1000_option part, got it down to 600 bytes). About half comes from not using multiple "e1000_option" structures, the other half comes from turning the "e1000_opt_list[]" arrays into "static const" instead, so that gcc doesn't copy them onto the stack. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Reveiewed-by: Auke Kok <auke-jan.h.kok@intel.com> Tested-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-27wan: Missing capability checks in sbni_ioctl()Eugene Teo
There are missing capability checks in the following code: 1300 static int 1301 sbni_ioctl( struct net_device *dev, struct ifreq *ifr, int cmd) 1302 { [...] 1319 case SIOCDEVRESINSTATS : 1320 if( current->euid != 0 ) /* root only */ 1321 return -EPERM; [...] 1336 case SIOCDEVSHWSTATE : 1337 if( current->euid != 0 ) /* root only */ 1338 return -EPERM; [...] 1357 case SIOCDEVENSLAVE : 1358 if( current->euid != 0 ) /* root only */ 1359 return -EPERM; [...] 1372 case SIOCDEVEMANSIPATE : 1373 if( current->euid != 0 ) /* root only */ 1374 return -EPERM; Here's my proposed fix: Missing capability checks. Signed-off-by: Eugene Teo <eugeneteo@kernel.sg> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-27Merge branch 'no-iwlwifi' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2008-08-27e100, fix iomap readJiri Slaby
There were 2 omitted readb's used on an iomap space. eliminate them by using ioread8 instead. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com> Cc: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27ibm_newemac: Don't call dev_mc_add() before device is registeredBenjamin Herrenschmidt
We must not call dev_mc_add() from within our HW configure which happens before we initialize and register the netdev. Do it in open() instead. Thanks to Sebastian Siewior for tracking it down. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27net: don't grab a mutex within a timer context in gianfarSebastian Siewior
I got the following backtrace while network was unavailble: |NETDEV WATCHDOG: eth0: transmit timed out |BUG: sleeping function called from invalid context at /home/bigeasy/git/linux-2.6-powerpc/kernel/mutex.c:87 |in_atomic():1, irqs_disabled():0 |Call Trace: |[c0383d90] [c0006dd8] show_stack+0x48/0x184 (unreliable) |[c0383db0] [c001e938] __might_sleep+0xe0/0xf4 |[c0383dc0] [c025a43c] mutex_lock+0x24/0x3c |[c0383de0] [c019005c] phy_stop+0x20/0x70 |[c0383df0] [c018d4ec] stop_gfar+0x28/0xf4 |[c0383e10] [c018e8c4] gfar_timeout+0x30/0x60 |[c0383e20] [c01fe7c0] dev_watchdog+0xa8/0x144 |[c0383e30] [c002f93c] run_timer_softirq+0x148/0x1c8 |[c0383e60] [c002b084] __do_softirq+0x5c/0xc4 |[c0383e80] [c00046fc] do_softirq+0x3c/0x54 |[c0383e90] [c002ac60] irq_exit+0x3c/0x5c |[c0383ea0] [c000b378] timer_interrupt+0xe0/0xf8 |[c0383ec0] [c000e5ac] ret_from_except+0x0/0x18 |[c0383f80] [c000804c] cpu_idle+0xcc/0xdc |[c0383fa0] [c025c07c] etext+0x7c/0x90 |[c0383fc0] [c0338960] start_kernel+0x294/0x2a8 |[c0383ff0] [c00003dc] skpinv+0x304/0x340 |------------[ cut here ]------------ The phylock was once a spinlock but got changed into a mutex via commit 35b5f6b1a aka [PHYLIB: Locking fixes for PHY I/O potentially sleeping] Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27forcedeth: fix checksum flagAyaz Abdulla
Fix the checksum feature advertised in device flags. The hardware support TCP/UDP over IPv4 and TCP/UDP over IPv6 (without IPv6 extension headers). However, the kernel feature flags do not distinguish IPv6 with/without extension headers. Therefore, the driver needs to use NETIF_F_IP_CSUM instead of NETIF_F_HW_CSUM since the latter includes all IPv6 packets. A future patch can be created to check for extension headers and perform software checksum calculation. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Manfred Spraul <manfred@colorfullife.com Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27net/usb/mcs7830: add set_mac_addressOliver Martin
Implement set_mac_address for mcs7830. This enables me to use it with my cable modem. Signed-off-by: Oliver Martin <oliver.martin@student.tuwien.ac.at> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27net/usb/mcs7830: new device IDsArnd Bergmann
This adds USB device IDs for MosChip 7730 and Sitecom LN030 to the mcs7830 driver. The IDs have been reported to work without further modifications. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: David Brownell <david-b@pacbell.net> Cc: Viktor Horvath <ViktorHorvath@gmx.net> Cc: Robbert Wethmar <robbert@wethmar.nl> Cc: Bart van der Klip <bklip@xs4all.nl> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 09:23:24 +0000