aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2008-08-14myri10ge: myri10ge_fw_name also overrides the rss firmwareBrice Goglin
When myri10ge_fw_name is given, use it to override the rss firmware name as well. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-14ixp4xx_eth: fix dma_mapping_error() compile errorsMikael Pettersson
The arm ixp4xx_eth driver doesn't compile in 2.6.27-rc1: CC [M] drivers/net/arm/ixp4xx_eth.o drivers/net/arm/ixp4xx_eth.c: In function 'eth_poll': drivers/net/arm/ixp4xx_eth.c:554: warning: passing argument 1 of 'dma_mapping_error' makes pointer from integer without a cast drivers/net/arm/ixp4xx_eth.c:554: error: too few arguments to function 'dma_mapping_error' drivers/net/arm/ixp4xx_eth.c: In function 'eth_xmit': drivers/net/arm/ixp4xx_eth.c:701: warning: passing argument 1 of 'dma_mapping_error' makes pointer from integer without a cast drivers/net/arm/ixp4xx_eth.c:701: error: too few arguments to function 'dma_mapping_error' drivers/net/arm/ixp4xx_eth.c: In function 'init_queues': drivers/net/arm/ixp4xx_eth.c:886: warning: passing argument 1 of 'dma_mapping_error' makes pointer from integer without a cast drivers/net/arm/ixp4xx_eth.c:886: error: too few arguments to function 'dma_mapping_error' make[3]: *** [drivers/net/arm/ixp4xx_eth.o] Error 1 make[2]: *** [drivers/net/arm] Error 2 make[1]: *** [drivers/net] Error 2 make: *** [drivers] Error 2 dma_mapping_error() changed in 2.6.27-rc1 to also take a device parameter, but nobody bothered updating ixp4xx_eth.c. Fixed by passing the appropriate device value in the dma_mapping_error() calls. Tested on an ixp425 box. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Acked-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-14gianfar: Call gfar_halt_nodisable() from gfar_halt().Scott Wood
gfar_halt() was factored out into halting and disabling by commit d87eb12785c14de1586e3bad86ca2c0991300339, as the suspend() method only wants to do the former. However, the call to gfar_halt_nodisable() from gfar_halt() apparently got lost during the patch respin process. This adds it back. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-14[netdrvr] remove unnecessary #includeHuang Weiyi
The drivers below do not use LINUX_VERSION_CODE nor KERNEL_VERSION. drivers/net/acenic.c drivers/net/bnx2x_link.c drivers/net/bnx2x_main.c drivers/net/cpmac.c drivers/net/gianfar_sysfs.c drivers/net/ipg.h drivers/net/ppp_mppe.c drivers/net/pppol2tp.c drivers/net/r6040.c drivers/net/sh_eth.c drivers/net/sky2.c drivers/net/tehuti.h drivers/net/typhoon.c This patch removes the said #include <linux/version.h>. Signed-off-by: Huang Weiyi <hwy@cn.fujitsu.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-13bnx2x: Version updateEilon Greenstein
Version update Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13bnx2x: Checkpatch complianceEilon Greenstein
Checkpatch compliance The latest version of checkpatch found the following style errors in the code Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13bnx2x: Spelling mistakesEilon Greenstein
Spelling mistakes Spelling has to L's in it... Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13bnx2x: Minor code improvementsEilon Greenstein
Minor code improvements Small changes to make the code a little bit more efficient and mostly more readable: - Using unified macros for EMAC_RD/WR which looks like normal REG_RD/WR - Removing the NIG_WR since it did nothing and was only confusing - On bnx2x_panic_dump, print only the used parts of the rings - define parameters only on the branch they are needed and not at the beginning of the function - using NETIF_MSG_INTR and not private BNX2X_MSG_SP for debug prints Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13bnx2x: Driver infoEilon Greenstein
Driver info The internal FW which is downloaded by the driver should not be displayed - it is only causing confusion and it is redundant since it can be concluded from the driver version. Display only FW which is burned on the board nvram Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13bnx2x: 1G LED does not turn offEilon Greenstein
1G LED does not turn off The 1G LED was not switched to off when the link was lost Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13bnx2x: 8073 PHY changesYaniv Rosner
8073 PHY changes The initial support we had for this PHY needs some serious changing. The major change is that this PHY should be initialized only when the first function is loaded and not for each function. The official SPI-ROM of this PHY was released and it requires some changes in the initialization code as well Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13bnx2x: Change GPIO for any portEilon Greenstein
Change GPIO for any port The set GPIO function should receive the port index to allow changing the GPIO of another port. This is needed for the common init phase (one the first driver is loaded for the chip) Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13bnx2x: Pause settingsYaniv Rosner
Pause settings - 1G pause was not working due to missing write to the emac block (TX_MODE_FLOW_EN) - The flow control should use the negotiated result (after autoneg) so we should save both the requested autoneg and the result - The HW credits with flow control at 1G speed were not optimized and caused low throughput - It is recommended to turn off flow control if the MTU is bigger than 5000B due to internal buffers size Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13bnx2x: Link order with external PHYYaniv Rosner
Link order with external PHY When external PHY exists (second chip with the PHY to translate to another physical medium) the link with the eternal PHY and the network should be established before setting the link between the 5771x and the PHY. This is the right order and it is important when using autoneg - the link to the network should use the autoneg and the link between the two chips should be forced to the network result. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13bnx2x: No LRO without Rx checksumVladislav Zolotarov
No LRO without Rx checksum Disabling LRO when Rx checksum is disabled Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13bnx2x: Wrong structure sizeYitchak Gertner
Wrong structure size The wrong structure was used in the sizeof to clear (luckily both structures have the same size in this version...) Signed-off-by: Yitchak Gertner <gertner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13bnx2x: WoL capabilityEilon Greenstein
WoL capability All designs reported WoL capability regardless of HW limitations - check if this device is actually capable of WoL Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13bnx2x: Clearing MAC addresses filtersYitchak Gertner
Clearing MAC addresses filters When the driver unloads, it should clear the MAC addresses filters in the HW - this prevents packets from entering the chip when the driver is re-loaded before initializing the right filters Signed-off-by: Yitchak Gertner <gertner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13bnx2x: Delay in while loopsYitchak Gertner
Delay in while loops The delay in the loop should be after the change. This has very little effect (can save one delay) but it is the right thing to do Signed-off-by: Yitchak Gertner <gertner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13bnx2x: PBA Table Page Alignment WorkaroundEilon Greenstein
PBA Table Page Alignment Workaround The PBA table starts on the middle of the page and that's causing very low performance with virtualization. The solution is not to update via the BAR directly but via chip access to the same memory Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13bnx2x: Self-test false positiveYitchak Gertner
Self-test false positive - The memory test should use a mask according to the chip type - In the register test, check the port only once and not inside the for loop (not causing a failure - just ugly) Signed-off-by: Yitchak Gertner <gertner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13bnx2x: Memory allocationEilon Greenstein
Memory allocation - The CQE ring was allocated to the max size even for a chip that does not support it. Fixed to allocate according to the chip type to save memory - The rx_page_ring was not freed on driver unload Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13bnx2x: HW attention lockEilon Greenstein
HW attention lock Making sure that only one function will handle the HW attention. This makes the device parameter aeu_mask redundant so it is removed Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13bnx2x: HW lock mechanismYitchak Gertner
HW lock mechanism Enhancing the HW lock to work per function and not only per port - this is needed for the next patch that protects races over HW attention detection between the different functions. At this chance, changing the functions names to be more inline with the current naming convention Signed-off-by: Yitchak Gertner <gertner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13bnx2x: Load/Unload under trafficVladislav Zolotarov
Load/Unload under traffic Few issues were found when loading and unloading under traffic: - When receiving Tx interrupt call netif_wake_queue if the queue is stopped but the state is open - Check that interrupts are enabled before doing anything else on the msix_fp_int function - In nic_load, enable the interrupts only when needed and ready for it - Function stop_leading returns status since it can fail - Add 1ms delay when unloading the driver to validate that there are no open transactions that already started by the FW - Splitting the "has work" function into Tx and Rx so the same function will be used on unload and interrupts - Do not request for WoL if only resetting the device (save the time that it takes the FW to set the link after reset) - Fixing the device reset after iSCSI boot and before driver load - all internal buffers must be cleared before the driver is loaded Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13bnx2x: FW Internal Memory structureEilon Greenstein
FW Internal Memory structure The FW uses data structures on the chip internal memory to aggregate the connections when TPA is enabled. The driver was clearing the wrong offsets and therefore one function could cause another function to loose packets. Changing the initialization of the chip internal memory to clear only the relevant memory for each function which is being loaded Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13bnx2x: StatisticsYitchak Gertner
Statistics - Making sure that each drop is accounted for in the driver statistics - Clearing the FW statistics when driver is loaded to prevent inconsistency with HW statistics - Once error is detected (bnx2x_panic_dump), stop the statistics before other actions (currently it is stopped last and can corrupt the data) - Adding HW checksum error counter to the statistics - Removing unused variable stats_ticks - Using macros instead of magic numbers to indicate which statistics are shared per port and which are per function Signed-off-by: Yitchak Gertner <gertner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13bnx2x: Not dropping packets with L3/L4 checksum errorEilon Greenstein
Not dropping packets with L3/L4 checksum error Those packets should be passed to the OS. The problem is clear in forwarding mode. Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13bnx2x: FW (bootcode) interface fixesEilon Greenstein
FW (bootcode) interface fixes - Making sure that the device will not cause kernel panic of the bootcode is corrupted or missing - Removing module debug parameter "nomcp" since no one should work without the bootcode (this is a left over from the chip bring up days) - Instead of waiting fix amount of time for bootcode response, sample it every 10ms (usually the answer is ready after less than 10ms) Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-07bnx2x: fix logical opRandy Dunlap
Fix dubious logical operation that was found by sparse: linux-next-20080807/drivers/net/bnx2x_main.c:7205:27: warning: dubious: !x & y Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-07Merge branch 'ath9k' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2008-08-07ath9k: Revamp wireless mode usageSujith
Use a single enum for managing modes, store supported modes by the HW in a bitmask. Register legacy rates with mac80211 only at init. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-07ath9k: More unused macrosSujith
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-07ath9k: Remove a few unused macros and fix indentationSujith
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-07ath9k: Use mac80211's band macros and remove enum hal_freq_bandSujith
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-07ath9k: Remove redundant data structure ath9k_txq_infoSujith
Use ath9k_tx_queue_info which contains the same elements, and merge get/set functions of tx queue properties. Also, fix whitespace damage in struct ath_softc. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-07ath9k: Cleanup data structures related to HW capabilitiesSujith
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-07ath9k: work around gcc ICEsAdrian Bunk
This patch works around an internal compiler error (gcc bug #37014) in all gcc 4.2 compilers and the gcc 4.3 series up to at least 4.3.1 on at least powerpc and mips. Many thanks to Andrew Pinski for analyzing the gcc bug. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-07ath9k: Add new Atheros IEEE 802.11n driverLuis R. Rodriguez
This adds the new mac80211 11n ath9k Atheros driver. Only STA support is currently enabled and tested. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Jack Howarth <howarth@bromo.msbb.uc.edu> Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-07ath5k: remove Atheros 11n devices from supported listLuis R. Rodriguez
Remove Atheros 11n devices from being claimed by ath5k as its now handled by ath9k. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-07p54: swap short slot time dcf valuesChristian Lamparter
these "magic" values must to be the other way round... Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-07rt2x00: Block all unsupported modesIvo van Doorn
It was possible for unsupported operating modes to be accepted by the add_interface callback function. This patch will block those modes until proper support has been implemented for them. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-07p54: Fix for TX sequence number problemLarry Finger
Following "mac80211: fix TX sequence numbers", if a packet has the IEEE80211_TX_CTL_ASSIGN_SEQ assigned, a sequence number must be supplied, either by hardware or software. AFAIK, no such hardware exists for the p54, thus it must be done in software. With this patch, a connection qith p54usb is stable, whereas the interface went off-line in 2-3 hours without this change. Note that this code will have to be reworked for proper sequence numbers on beacons. In addition, the sequence number has been placed in the hardware state, not the vif state. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-07iwlwifi: cleanup iwl_tx_skbTomas Winkler
This patch cleans up iwl_tx_skb function. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-07Merge branch 'for-jeff' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6 into tmp
2008-08-07WAN: remove extra help text from HDLC_PPP config optionKrzysztof Halasa
Remove extra help text from HDLC_PPP config option. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07bonding: Don't destroy bonding master when removing slave via sysfsMoni Shoua
It is wrong to destroy a bonding master from a context that uses the sysfs of that bond. When last IPoIB slave is unenslaved from by writing to a sysfs file (for bond0 this would be /sys/class/net/bond0/bonding/slaves) the driver tries to destroy the bond. This is wrong and can lead to a lockup or a crash. This fix lets the bonding master stay and relies on the user to destroy the bonding master if necessary (i.e. before module ib_ipoib is unloaded) This patch affects only bonds of IPoIB slaves. Ethernet slaves stay unaffected. Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07bonding: refactor mii monitorJay Vosburgh
Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07[netdrvr] Drivers should not set IFF_* flag themselvesWang Chen
Some hardware set promisc when they are requested to set IFF_ALLMULTI flag. It's ok, but if drivers set IFF_PROMISC flag when they set promisc, it will broken upper layer handle for promisc and allmulti. In addition, drivers can use their own hardware programming to make it. So do not allow drivers to set IFF_* flags. This is a general driver fix, so I didn't split it to pieces and send to specific driver maintainers. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07dm9000: Support MAC address setting through platform data.Laurent Pinchart
The dm9000 driver reads the chip's MAC address from the attached EEPROM. When no EEPROM is present, or when the MAC address is invalid, it falls back to reading the address from the chip. This patch lets platform code set the desired MAC address through platform data. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 18:01:25 +0000