aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2006-07-19[PATCH] Cleanup SLHC configurationRalf Baechle
Convert selection of serial line header compression to use CONFIG_SLHC rather than makefile ifeq uglyness. This makes it easier to select the SLHC module from other code. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-19[PATCH] sky2: add another PCI IDStephen Hemminger
Yet another PCI ID for 88E8056 Signed-off-by: Stephen Hemminger <sch@sch-laptop.localdomain> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-17[PATCH] spidernet: rework tx queue handlingJens Osterkamp
With this patch TX queue descriptors are not chained per default any more. The pointer to next descriptor is set only when next descriptor is prepaired for transfer. Also the mechanism of checking wether Spider is ready has been changed: it checks not for CARDOWNED flag in status of previous descriptor but for a TXDMAENABLED flag in Spider's register. Signed-off-by: Maxim Shchetynin <maxim@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Jens Osterkamp <Jens.Osterkamp@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-17[PATCH] spidernet: bug fix for init codeJens Osterkamp
We want to intitialize addr instead of data register first. Signed-off-by: Jens Osterkamp <Jens.Osterkamp@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-17[PATCH] sky2: NAPI poll fixStephen Hemminger
When sky2 driver gets lots of received packets at once, it can get stuck. The NAPI poll routine gets called back to keep going, but since no IRQ bits are set it doesn't make progress. Increase version, since this is serious enough problem that I want to be able to tell new from old problems. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-17Merge branch 'upstream-fixes-jgarzik' of ↵Jeff Garzik
git://lost.foo-projects.org/~ahkok/git/netdev-2.6 into upstream-fixes
2006-07-14e1000: bump version to 7.1.9-k4Auke Kok
Bump the version to 7.1.9-k4 to indicate three extra changes. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-07-14e1000: fix panic on large frame receive when mtu=defaultAuke Kok
A panic was reported when receiving 1522 size packets if using the default MTU. we should set the initial rx buffer length to the value that e1000changemtu sets so that we can receive any packet that would not be dropped by LPE=0. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke.jan.h.kok@intel.com>
2006-07-14e1000: remove CRC bytes from measured packet lengthAuke Kok
After removing the hardware CRC stripping which causes problems with SOL and related issues, we need to compensate for this changed size. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-07-14e1000: Redo netpoll fix to address community concernsAuke Kok
The original suggested fix for netpoll was found to be racy on SMP kernels. While it is highly unlikely that this race would ever be seen in the real world due to current netpoll usage models, we implemented this updated fix to address concerns. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-07-12Merge commit master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 of HEADLinus Torvalds
* HEAD: [NET]: fix __sk_stream_mem_reclaim [Bluetooth] Fix deadlock in the L2CAP layer [Bluetooth] Let BT_HIDP depend on INPUT [Bluetooth] Avoid NULL pointer dereference with tty->driver [Bluetooth] Remaining transitions to use kzalloc() [WAN]: converting generic HDLC to use netif_dormant*() [IPV4]: Fix error handling for fib_insert_node call [NETROM] lockdep: fix false positive [ROSE] lockdep: fix false positive [AX.25]: Optimize AX.25 socket list lock [IPCOMP]: Fix truesize after decompression [IPV6]: Use ipv6_addr_src_scope for link address sorting. [TCP] tcp_highspeed: Fix AI updates. [MAINTAINERS]: Add proper entry for TC classifier [NETROM]: Drop lock before calling nr_destroy_socket [NETROM]: Fix locking order when establishing a NETROM circuit. [AX.25]: Fix locking of ax25 protocol function list. [IPV6]: order addresses by scope
2006-07-12[PATCH] sky2: optimize receive restartStephen Hemminger
When the driver handles multiple packets per NAPI poll, it is better to reload the receive ring, then tell the hardware. Otherwise, under packet storm with flow control, the driver/hardware will degrade down to one packet getting through per pause-exchange. Likewise on transmit, don't wakeup until a little more than minimum ring space is available. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-12[PATCH] sky2: PHY power on delaysStephen Hemminger
The documentation says we need to wait after turning on the PHY. Also, don't enable WOL by default. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-12[PATCH] sky2: NAPI suspend/resume of dual port cardsStephen Hemminger
The changes to handle suspend/resume didn't handle the case where a dual port card has the first port down, but the second is running. In this driver, all NAPI polling is done on the primary port. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-12[PATCH] sky2: sky2_reset section mismatchStephen Hemminger
Since sky2_reset gets call from sky2_resume it shouldn't be tagged with devinit. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-12[PATCH] sk98lin: fix truncated collision threshold maskStephen Hemminger
Patch to correct broken collision threshold mask in (same problem as sky2 driver). Should be three bits wide, but the mask only allows for 1 bit to be set. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-12[PATCH] skge: fix truncated collision threshold maskStephen Hemminger
Patch to correct broken collision threshold mask in (same problem as sky2 driver). Should be three bits wide, but the mask only allows for 1 bit to be set. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-12[PATCH] sky2: fix truncated collision threshold maskStephen Hemminger
Patch to correct broken collision threshold mask in sky2 driver. Should be three bits wide, but the mask only allows for 1 bit to be set. Thanks & Regards Neil Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Stephen Hemminger <shemminger@osdl.org> sky2.h | 2 +- 1 files changed, 1 insertion(+), 1 deletion(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-12[PATCH] myri10ge return value fixBrice Goglin
Andrew Morton wrote: > All these functions return error codes, and we're not checking them. We > should. So there's a patch which marks all these things as __must_check, > which causes around 1,500 new warnings. > The following patch fixes such a warning in myri10ge. Check pci_enable_device() return value in myri10ge_resume(). Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-12[PATCH] Update smc91x driver with ARM Versatile board infoDeepak Saxena
We need to specify a Versatile-specific SMC_IRQ_FLAGS value or the new generic IRQ layer will complain thusly: No IRQF_TRIGGER set_type function for IRQ 25 (<NULL>) Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-12[PATCH] ixgb: fix tx unit hang - properly calculate desciptor countAuke Kok
There were some tso bugs that only showed up with heavy load and 16kB pages that this patch fixes by making the driver's internal use count of descriptors match the count that it was estimating it needed using the DESC_NEEDED macro. This bug caused NETDEV_WATCHDOG resets aka tx timeouts. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-12[PATCH] smsc-ircc2: fix section reference mismatchesDmitry Torokhov
subsystem_configurations array is only used by an __init function, therefore it should be marked __initdata, not __devinitdata. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-12[PATCH] 8139cp.c printk fixAndrew Morton
drivers/net/8139cp.c: In function 'cp_init_one': drivers/net/8139cp.c:1919: warning: format '%lx' expects type 'long unsigned int', but argument 4 has type 'resource_size_t' drivers/net/8139cp.c:1919: warning: format '%lx' expects type 'long unsigned int', but argument 5 has type 'resource_size_t' Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-12[PATCH] s2io driver irq fixAnanda Raju
Modification and bug fixes with respect to irq registration. - Enable interrupts after request_irq - Restored MSI data register value at driver unload time Signed-off-by: Ananda Raju <ananda.raju@neterion.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-12[PATCH] e1000: irq naming updateAndrew Morton
Use the new names. Cc: Auke Kok <auke-jan.h.kok@intel.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-12Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2006-07-12[PATCH] forcedeth: watermark fixupAyaz Abdulla
This patch defines the watermark registers and fixes up the use of this register. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-12[PATCH] forcedeth: deferral fixupAyaz Abdulla
This patch adds the definition for the deferral registers and fixes up the use of these registers. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-12[WAN]: converting generic HDLC to use netif_dormant*()Krzysztof Halasa
This patch converts generic HDLC (and WAN drivers using it) from hdlc_set_carrier() to netif_dormant*() interface. WAN hardware drivers should now use netif_carrier_on|off() like other network drivers. Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-10[BPQ] lockdep: fix false positiveRalf Baechle
Bpqether is encapsulating AX.25 frames into ethernet frames. There is a virtual bpqether device paired with each ethernet devices, so it's normal to pass through dev_queue_xmit twice for each frame which triggers the locking detector. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-10[PATCH] release_firmware() fixesMagnus Damm
Use release_firmware() to free requested resources. According to Documentation/firmware_class/README the request_firmware() call should be followed by a release_firmware(). Some drivers do not however free the firmware previously allocated with request_firmware(). This patch tries to fix this by making sure that release_firmware() is used as expected. Signed-off-by: Magnus Damm <magnus@valinux.co.jp> Acked-by: Marcel Holtmann <marcel@holtmann.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10[PATCH] zd1211rw: usb_clear_halt not allowed in IRQ contextDaniel Drake
We will reimplement halt-clearing later, when we have periodic housekeeping routines in place. This will do as a temporary fix, the EPIPE case has not yet been seen. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-10[PATCH] bcm43xx-softmac: Fix an off-by-one condition in handle_irq_noiseLarry Finger
An assert statement near the start of handle_irq_noise in the softmac version of bcm43xx_main.c is there to protect against out of bound addressing using variable bcm->noisecalc.nr_samples. The arrays in question have a dimension of 8, thus the value must be < 8. Signed-Off-By: Larry.Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-09Merge commit master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 of HEADLinus Torvalds
* HEAD: [AX.25]: Use kzalloc [ATM] net/atm/clip.c: fix PROC_FS=n compile [PKT_SCHED]: act_api: Fix module leak while flushing actions [NET]: Fix IPv4/DECnet routing rule dumping [NET] gso: Fix up GSO packets with broken checksums [NET] gso: Add skb_is_gso [IRDA]: fix drivers/net/irda/ali-ircc.c:ali_ircc_init() [ATM]: fix possible recursive locking in skb_migrate() [ATM]: Typo in drivers/atm/Kconfig... [TG3]: add amd8131 to "write reorder" chipsets [NET]: Fix network device interface printk message priority
2006-07-08[NET] gso: Add skb_is_gsoHerbert Xu
This patch adds the wrapper function skb_is_gso which can be used instead of directly testing skb_shinfo(skb)->gso_size. This makes things a little nicer and allows us to change the primary key for indicating whether an skb is GSO (if we ever want to do that). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-08[IRDA]: fix drivers/net/irda/ali-ircc.c:ali_ircc_init()Adrian Bunk
The Coverity checker spotted, that from the changes from commit 898b1d16f8230fb912a0c2248df685735c6ceda3 the if (ret) platform_driver_unregister(&ali_ircc_driver); was dead code. This patch changes this function to what seems to have been the intention. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-08[TG3]: add amd8131 to "write reorder" chipsetsJohn W. Linville
Add the AMD 8131 bridge to the list of chipsets that reorder writes. Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-05Merge branch 'upstream' of git://lost.foo-projects.org/~ahkok/git/netdev-2.6 ↵Jeff Garzik
into upstream Conflicts: drivers/net/e1000/e1000_main.c
2006-07-05[PATCH] 8139too deadlock fixArjan van de Ven
> stack backtrace: > [<f9099d31>] rtl8139_start_xmit+0xd9/0xff [8139too] > [<c11ad5ea>] netpoll_send_skb+0x98/0xea This seems to be a real deadlock... So netpoll_send_skb takes the _xmit_lock, which is all nitty gritty but then rtl8139_start_xmit comes around while that lock is taken, and does spin_unlock_irq(&tp->lock); which.. enables interrupts and softirqs; this is quite bad because the xmit lock is taken in softirq context for the watchdog like this: [<c1200376>] _spin_lock+0x23/0x32 [<c11af282>] dev_watchdog+0x14/0xb1 [<c101dab2>] run_timer_softirq+0xf2/0x14a [<c101a691>] __do_softirq+0x55/0xb0 [<c1004a8d>] do_softirq+0x58/0xbd Which would deadlock now that the spin_unlock_irq() has enabled irqs/softirqs while the _xmit_lock is still held. The patch below turns this into a irqsave/irqrestore pair so that interrupts don't get enabled unconditionally. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[netdrvr] 3c59x: snip changelog from source codeJeff Garzik
Driver source code is not the preferred place to store change history. Acked-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] myri10ge - Export more parameters to ethtoolBrice Goglin
Add the IRQ line, the tx_boundary, and whether Write-combining and MSI are enabled to the list of parameters that are exported to ethtool. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] myri10ge - Use dev_info() when printing parameters after probeBrice Goglin
Displaying the interface name when listing the device parameters at the end of myri10ge_probe is not a good idea since udev might rename the interface soon afterwards. Print the bus id instead, using dev_info(). Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] myri10ge - Drop ununsed nvidia chipset idbrice@myri.com
The workaround for the AER capability of the nVidia chipset has been removed, we don't need this PCI id anymore. Drop it. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] myri10ge - Drop unused pm_statebrice@myri.com
The pm_state field in the myri10ge_priv structure is unused. Drop it. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] Fix freeing of net deviceRalf Baechle
Plus optical sugar. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] remove dead entry in net wan KconfigPaul Fulghum
Remove dead entry from net wan Kconfig and net wan Makefile.. This entry is left over from 2.4 where synclink used syncppp driver directly. synclink drivers now use generic HDLC Signed-off-by: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] NI5010 netcard cleanupAndreas Mohr
- updated MAINTAINERS entry to new format - updated Jan-Pascal's (ACKed) and my email address - driver cleanup/modernization (runtime-, not hardware-tested) [bunk@stusta.de: build fix] Signed-off-by: Andreas Mohr <andi@lisas.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Jan-Pascal van Best <jvbest@qv3pluto.leidenuniv.nl> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] lock validator: fix ns83820.c irq-flags bugIngo Molnar
Barry K. Nathan reported the following lockdep warning: [ 197.343948] BUG: warning at kernel/lockdep.c:1856/trace_hardirqs_on() [ 197.345928] [<c010329b>] show_trace_log_lvl+0x5b/0x105 [ 197.346359] [<c0103896>] show_trace+0x1b/0x20 [ 197.346759] [<c01038ed>] dump_stack+0x1f/0x24 [ 197.347159] [<c012efa2>] trace_hardirqs_on+0xfb/0x185 [ 197.348873] [<c029b009>] _spin_unlock_irq+0x24/0x2d [ 197.350620] [<e09034e8>] do_tx_done+0x171/0x179 [ns83820] [ 197.350895] [<e090445c>] ns83820_irq+0x149/0x20b [ns83820] [ 197.351166] [<c013b4b8>] handle_IRQ_event+0x1d/0x52 [ 197.353216] [<c013c6c2>] handle_level_irq+0x97/0xe1 [ 197.355157] [<c01048c3>] do_IRQ+0x8b/0xac [ 197.355612] [<c0102d9d>] common_interrupt+0x25/0x2c this is caused because the ns83820 driver re-enables irq flags in hardirq context. While legal in theory, in practice it should only be done if the hardware is really old and has some very high overhead in its ISR. (such as PIO IDE) For modern hardware, running ISRs with irqs enabled is discouraged, because 1) new hardware is fast enough to not cause latency problems 2) allowing the nesting of hardware interrupts only 'spreads out' the handling of the current ISR, causing extra cachemisses that would otherwise not happen. Furthermore, on architectures where ISRs share the kernel stacks, enabling interrupts in ISRs introduces a much higher kernel-stack-nesting and thus kernel-stack-overflow risk. 3) not managing irq-flags via the _irqsave / _irqrestore variants is dangerous: it's easy to forget whether one function nests inside another, and irq flags might be mismanaged. In the few cases where re-enabling interrupts in an ISR is considered useful (and unavoidable), it has to be taught to the lock validator explicitly (because the lock validator needs the "no ISR ever enables hardirqs" artificial simplification to keep the IRQ/softirq locking dependencies manageable). This teaching is done via the explicit use local_irq_enable_in_hardirq(). On a stock kernel this maps to local_irq_enable(). If the lock validator is enabled then this does not enable interrupts. Now, the analysis of drivers/net/ns83820.c's irq flags use: the irq-enabling in irq context seems intentional, but i dont think it's justified. Furthermore, the driver suffers from problem #3 above too, in ns83820_tx_timeout() it disables irqs via local_irq_save(), but then it calls do_tx_done() which does a spin_unlock_irq(), re-enabling for a function that does not expect it! While currently this bug seems harmless (only some debug printout seems to be affected by it), it's nevertheless something to be fixed. So this patch makes the ns83820 ISR irq-flags-safe, and cleans up do_tx_done() use and locking to avoid the ns83820_tx_timeout() bug. From: Arjan van de Ven <arjan@linux.intel.com> ns83820_mib_isr takes the misc_lock in IRQ context. All other places that do this in the ISR already use _irqsave versions, make this consistent at least. At some point in the future someone should audit the driver to see if all _irqsave's in the ISR can go away, this is generally an iffy/fragile proposition though; for now get it safe, simple and consistent. From: Arjan van de Ven <arjan@linux.intel.com> ok this is a real driver deadlock: The ns83820 driver enabled interrupts (by unlocking the misc_lock with _irq) while still holding the rx_info.lock, which is required to be irq safe since it's used in the ISR like this: writel(1, dev->base + IER); spin_unlock_irq(&dev->misc_lock); kick_rx(ndev); spin_unlock_irq(&dev->rx_info.lock); This is can cause a deadlock if an irq was pending at the first spin_unlock_irq already, or if one would hit during kick_rx(). Simply remove the first _irq solves this Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] pcnet32: Cleanup rx buffers after loopback test.Don Fry
More cleanup to pcnet32_loopback_test to release receive buffers if device is not up. Created common routine to free rx buffers. Tested ia32 and ppc64 Signed-off-by: Don Fry <brazilnut@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] pcnet32: Suspend the chip rather than restart when changing ↵Don Fry
multicast/promisc Suspend the chip if possible rather than stop and discard all tx and rx frames, when changing the mcast list or entering/leaving promiscuous mode. Created common pcnet32_suspend routine. Tested ia32 and ppc64 Signed-off-by: Don Fry <brazilnut@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-12 20:56:09 +0000