aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2009-12-05Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
Conflicts: drivers/net/pcmcia/fmvj18x_cs.c drivers/net/pcmcia/nmclan_cs.c drivers/net/pcmcia/xirc2ps_cs.c drivers/net/wireless/ray_cs.c
2009-12-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (50 commits) pcmcia: rework the irq_req_t typedef pcmcia: remove deprecated handle_to_dev() macro pcmcia: pcmcia_request_window() doesn't need a pointer to a pointer pcmcia: remove unused "window_t" typedef pcmcia: move some window-related code to pcmcia_ioctl.c pcmcia: Change window_handle_t logic to unsigned long pcmcia: Pass struct pcmcia_socket to pcmcia_get_mem_page() pcmcia: Pass struct pcmcia_device to pcmcia_map_mem_page() pcmcia: Pass struct pcmcia_device to pcmcia_release_window() drivers/pcmcia: remove unnecessary kzalloc pcmcia: correct handling for Zoomed Video registers in topic.h pcmcia: fix printk formats pcmcia: autoload module pcmcia pcmcia/staging: update comedi drivers PCMCIA: stop duplicating pci_irq in soc_pcmcia_socket PCMCIA: ss: allow PCI IRQs > 255 PCMCIA: soc_common: remove 'dev' member from soc_pcmcia_socket PCMCIA: soc_common: constify soc_pcmcia_socket ops member PCMCIA: sa1111: remove duplicated initializers PCMCIA: sa1111: wrap soc_pcmcia_socket to contain sa1111 specific data ...
2009-12-04Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-12-04iwmc3200wifi: Enable wimax core through module parameterSamuel Ortiz
When debugging the wifi firmware, we need to disable the wimax core to gain some memory space. The default value will keep the wimax core enabled. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-04iwmc3200wifi: Add wifi-wimax coexistence mode as a module parameterSamuel Ortiz
Wifi and wimax coexistence mode is set by wifi at boot time. There can be several modes, defined by priority tables. User space components can decide which one to select by writing to /sys/module/iwmc3200wifi/parameters/wiwi with this patch, before bringing the interface up. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-04iwmc3200wifi: Coex table command does not expect a responseSamuel Ortiz
When sending the wiwi coexistence priority table, we should not tell the LMAC that we want a response. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-04iwmc3200wifi: Update wiwi priority tableSamuel Ortiz
This update follows the firmware engineers recommendations. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-04iwlwifi: driver version track kernel versionReinette Chatre
The driver version number is a remnant from when there was an out-of-tree iwlwifi driver. Now that the driver forms part of kernel source we do not need a separate driver version. Instead, we now use the kernel version as driver version. We maintain the previous tags used to indicate which components the driver has been compiled with. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-04iwlwifi: indicate uCode type when fail dump error/event logWey-Yi Guy
error_event_table_ptr is only set upon receipt of REPLY_ALIVE. Until then both event log and error log will fail. Add information to indicate which uCode encounter the failure case. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-04iwl3945: remove duplicated event logging codeWey-Yi Guy
In the process of improving uCode event logging capability, the new implementation was introduced without removing the existing implementation. The event log will be dumped to dmesg twice. Remove the old implementation to only log the event once upon sys assert or request by user. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-04b43: fix two warningsJohannes Berg
My gcc appears to be able to see past the function boundary and notices that the variable 'behaviour' could be used uninitialised: drivers/net/wireless/b43/leds.c: In function ‘b43_leds_register’: drivers/net/wireless/b43/leds.c:339: warning: ‘behaviour’ may be used uninitialized in this function drivers/net/wireless/b43/leds.c: In function ‘b43_leds_init’: drivers/net/wireless/b43/leds.c:262: warning: ‘behaviour’ may be used uninitialized in this function because b43_led_get_sprominfo() didn't initialise it in all cases. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-04ipw2100: fix rebooting hang with driver loadedZhu Yi
Add PCI .shutdown method so that we can disable the device during shutdown or reboot. Without this, the reboot doesn't work well on some platforms. This fixes http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2124 Tested-by: pablo <pablolm2005@gmail.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-04iwmc3200wifi: fix NULL pointer dereference in pmkid updateZhu Yi
When handling IWM_CMD_PMKID_FLUSH command, the bssid and pmkid in pmksa are all NULL. Check it before memcpy. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-04ath9k: enable 2GHz band only if the device supports itGabor Juhos
Currently, the 2GHz band is enabled unconditionally, even if the device does not support it. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-04airo: Fix integer overflow warningMichael Buesch
On BigEndian gcc complains: drivers/net/wireless/airo.c: In function ‘sniffing_mode’: drivers/net/wireless/airo.c:4809: warning: integer overflow in expression Fix this by doing the bitwise AND on the host-endian value. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-04rt2x00: Fix padding bug on L2PAD devices.Gertjan van Wingerde
While reviewing the l2pad function to align both the header and the payload on a DMA-capable boundary a bug was discovered where the payload would not be properly aligned. The header_align value was used where the payload_align value should have been used. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-04b43legacy: avoid PPC fault during resumeLarry Finger
For PPC architecture with PHY Revision < 3, a read of the register B43_MMIO_HWENABLED_LO will cause a CPU fault unless b43legacy_status() returns a value of 2 (B43legacy_STAT_STARTED); however, one finds that the driver is unable to associate after resuming from hibernation unless this routine returns 1. To satisfy both conditions, the routine is rewritten to return TRUE whenever b43legacy_status() returns a value < 2. This patch fixes the second problem listed in the postings for Red Hat Bugzilla #538523. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-04b43: avoid PPC fault during resumeLarry Finger
The routine b43_is_hw_radio_enabled() has long been a problem. For PPC architecture with PHY Revision < 3, a read of the register B43_MMIO_HWENABLED_LO will cause a CPU fault unless b43_status() returns a value of 2 (B43_STAT_STARTED) (BUG 14181). Fixing that results in Bug 14538 in which the driver is unable to reassociate after resuming from hibernation because b43_status() returns 0. The correct fix would be to determine why the status is 0; however, I have not yet found why that happens. The correct value is found for my device, which has PHY revision >= 3. Returning TRUE when the PHY revision < 3 and b43_status() returns 0 fixes the regression for 2.6.32. This patch fixes the problem in Red Hat Bugzilla #538523. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Christian Casteyde <casteyde.christian@free.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-03be2net: Add support for ethtool self testSuresh R
This patch adds support for ethtool selftest. From: Suresh R <sureshr@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03net: Fix ks8851 snl NULL pointer dereference OopsTristram Ha
This fixes the NULL pointer dereference Oops in the ks8851 snl network driver during transmission. All socket buffers from the queue are processed inside the loop, but new workqueues have been scheduled to run. Signed-off-by: Tristram Ha <Tristram.Ha@micrel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03netdevice: provide common routine for macvlan and vlan operstate managementPatrick Mullaney
Provide common routine for the transition of operational state for a leaf device during a root device transition. Signed-off-by: Patrick Mullaney <pmullaney@novell.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03bnx2: Refine VPD logic.Michael Chan
- Replace magic values with constants - Simplify length calculation and fix a bug Based on valuable feedback from Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03ixgbe: use EIAM to automask MSI-XJesse Brandeburg
when disabling interrupts, driver was writing with IO, this is no necessary because on ixgbe parts the hardware can "oneshot" disable and clear the interrupt. So on 82598/82599 use of EIAM should avoid one posted write per interrupt when in MSI-X mode. This should improve performance and seems to in my limited testing, reduce CPU utilization VERY slightly. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03ixgbe: performance tweaksJesse Brandeburg
drop variables that had cache lines modified in simultaneous hot paths. keep some variables modified on hot paths but make their storage per queue. cache align DMA data buffer start addresses. cache align (padding) some structures that end within a cacheline. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03ixgbe: change default ring sizeJesse Brandeburg
decrease the memory utilization of the tx / rx queue allocation by changing the default ring size to 512 (from 1024). At 1024 rx entries of 2KB each (from 4kB slab) with 16 queues ixgbe was using 64 MB of memory per port, which is not necessary. Users can still change queue lengths with ethtool -k. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03ixgbe: select FCoE Tx queue in ndo_select_queueYi Zou
This removes the Tx queue selection for FCoE traffic from ixgbe_xmit_frame() and does it in the ndo_select_queue() call, moving all Tx queue selection into a single routine. Signed-off-by: Yi Zou <yi.zou@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03ixgbe: use known user priority for FCoE when DCB is enabledYi Zou
Store the user priority for FCoE and use it directly for outgoing FCoE traffic when DCB is enabled. Signed-off-by: Yi Zou <yi.zou@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03usbnet & cdc-ether: Autosuspend for online devicesOliver Neukum
Using remote wakeup and delayed transmission to allow online device to go into usb autosuspend. Minimal alternate support for devices that don't support remote wakeup. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03cdc-ether: Implement reset_resume()Oliver Neukum
Normal resume can do double duty as reset_resume() for this driver as it keeps no state in the device Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03bnx2: Update version to 2.0.3.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03bnx2: Read firmware version from VPD.Michael Chan
And display it through ethtool -i. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03bnx2: Print warning when unable to allocate the full SKB/page ring.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03bnx2: Dump some state during tx timeout.Michael Chan
To help debug the problem. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03bnx2: Protect tx timeout reset with rtnl_lock().Michael Chan
To prevent race conditions with other reset events. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03tg3: Update version to 3.105Matt Carlson
This patch updates the tg3 version to 3.105. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03tg3: Clean tg3_init_one()Matt Carlson
Tg3's firmware is no longer loaded from tg3_init_one(). Remove the error path that releases the firmware back to the system. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03tg3: Use pci_read_vpd() instead of private methodMatt Carlson
If the driver needs to use PCI configuration space to read the VPD data, the accesses could collide with the pci_read_vpd() function. This patch converts the driver to use pci_read_vpd() to avoid any potential collisions. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03tg3: Add some VPD preprocessor constantsMatt Carlson
This patch cleans up the VPD code by creating preprocessor definitions and using them in the place of hardcoded constants. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03tg3: Add 57765 asic revMatt Carlson
This patch adds the 57765 asic revision. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03tg3: Make TSS enable independent of MSI-X enableMatt Carlson
The 57765 asic rev has MSI-X capability, but does not support TSS. This patch changes the tx paths so that TSS is explicitly mentioned, rather than implied through the ENABLE_MSIX flag. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03drivers/net: Move && and || to end of previous lineJoe Perches
Only files where David Miller is the primary git-signer. wireless, wimax, ixgbe, etc are not modified. Compile tested x86 allyesconfig only Not all files compiled (not x86 compatible) Added a few > 80 column lines, which I ignored. Existing checkpatch complaints ignored. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03be2net: Bump up the driver version numberAjit Khaparde
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03be2net: Support for WoL using magic packet after suspend.Ajit Khaparde
Add support for WOL using Magic Packet after suspend is done. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03be2net: Changes to print fw command opcode when command is failed by controller.Ajit Khaparde
When a firmware command fails, only the failure codes are printed. It is difficult to co-relate this to the actual command that has failed. These changes will now print the command code that has failed. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02sunhme: fix dma warning in Sun HMEMikulas Patocka
Fix dma-api-checking warnings in Sun HME Sun HME driver is mapping the first fragment with dma_map_single and subsequent fragments with dma_map_page. It is unmapping all fragments with dma_unmap_single and that produces the warning. This patch changes it so that it unmaps only the first fragment with dma_unmap_single and subsequent fragments are unmapped with dma_unmap_page. WARNING: at lib/dma-debug.c:816 check_unmap+0x3ac/0x780() hme 0000:01:01.1: DMA-API: device driver frees DMA memory with wrong function [device address=0x00000000c1082000] [size=32 bytes] [mapped as page] [unmapped as single] Modules linked in: nbd sunhme openpromfs sermouse unix Call Trace: [0000000000456910] warn_slowpath_common+0x50/0xa0 [0000000000571f4c] check_unmap+0x3ac/0x780 [0000000000572570] debug_dma_unmap_page+0x50/0x60 [000000001002f5fc] happy_meal_tx+0x11c/0x260 [sunhme] [000000001002fc4c] happy_meal_interrupt+0xcc/0xe0 [sunhme] [0000000000492d94] handle_fasteoi_irq+0x74/0x100 [000000000042ac0c] handler_irq+0xcc/0x100 [0000000000426a54] valid_addr_bitmap_patch+0x14/0x1c0 [0000000000665de0] _spin_unlock_irqrestore+0x40/0x60 [0000000000462bb8] mod_timer+0x118/0x1a0 [00000000005ec254] sk_reset_timer+0x14/0x40 [0000000000635e4c] tcp_event_new_data_sent+0x8c/0xc0 [0000000000639374] __tcp_push_pending_frames+0x34/0xc0 ---[ end trace 73d5c42c1e9f11c4 ]--- Mapped at: [<000000001002f148>] happy_meal_start_xmit+0x308/0x480 [sunhme] [<00000000005fc858>] dev_hard_start_xmit+0x318/0x3c0 [<000000000060fec4>] sch_direct_xmit+0x1a4/0x200 [<00000000005fced0>] dev_queue_xmit+0x410/0x560 [<0000000000604a1c>] neigh_resolve_output+0xfc/0x300 Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02atl1e: Remove non-implementation of ethtool set_msglevel() operationBen Hutchings
Unimplemented operations should not silently fail. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02atl1e: Remove redundant definitions of ethtool operationsBen Hutchings
These functions provide the default behaviour and do not need to be set in struct ethtool_ops. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02atl1e: Allow TX checksum offload and TSO to be disabled and reenabledBen Hutchings
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2009-12-02cnic: Use dma_alloc_coherent().Michael Chan
Replace pci_alloc_consistent() with dma_alloc_coherent() so that appropriate GFP flags can be used. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 15:50:07 +0000