aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2008-06-03iwlwifi: mark 4965 ucode typesTomas Winkler
This patch marks 4965 ucode types. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwifi: create drivers debugfs dir under wiphy->debugfsdirZhu Yi
This patch creates driver's debugfs tree under wiphy->debugfsdir. This patch fixes collision in debugfs if two or more NICs are plugged. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwifi: increase max payload of iwl_cmdRon Rindjunsky
This patch increases iwl_cmd payload maximum size from 360 to 640 to fit some of iwl5000 commands as well. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwifi: use uCode error and event tables pointer w.r.t loaded imageGregory Greenman
This patch updates the usage of the pointers to error and log tables received in alive response w.r.t. the current uCode image. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwifi: add RTC data address for iwl5000Ron Rindjunsky
This patch fills the valid_rtc_data_addr handler in iwl5000. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03iwlwifi: move iwl_dump_nic_error_log to iwlcore moduleEster Kummer
This patch moves the function iwl_dump_nic_error_log to iwlcore. Remove sysfs entry it cannot be really triggered. Signed-off-by: Ester Kummer <ester.kummer@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03libertas: fix compact flash interrupt handlingHolger Schurig
The old code misbehaved because it polled card status and always called the "tx over" code-path. This also fixes a hard lockup by not allowing and card interrupts while transferring a TX frame or a command into the card. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03libertas: rate adaptation configuration via iwconfig.Javier Cardona
Implemented rate adaptation support via 'iwconfig rate' API. It is now possible to specify a bit-rate value and append 'auto'. That will configure rate adaptation to use all bit-rates equal or lower than than selected value. Made lbs_cmd_802_11_rate_adapt_rateset a direct command. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03b43legacy: fix build errors when DMA or PIO are not selectedJohannes Berg
Currently, b43legacy is broken due to commit fbad4598ca826b994d0fd4ce3deebc9cd1960b31 Author: Johannes Berg <johannes@sipsolutions.net> Date: Thu May 15 12:55:29 2008 +0200 mac80211: move TX info into skb->cb when compiled with only PIO or only DMA because I forgot to update two stubs. This patch fixes it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03rndis_wlan: use ARRAY_SIZE instead of sizeof when adding 11g ratesScott Ashcroft
While figuring out the TKIP problem I found a bug in the code which adds the 11g rates. It's using sizeof instead of ARRAY_SIZE to terminate the for loop. This makes it fall off the end of the rates array start into the frequency array instead. Running "iwlist rate" should show the problem as there will always be 32 rates with the last few being bogus. The following patch will fix it. Signed-off-by: Scott Ashcroft <scott.ashcroft@talk21.com> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03ath5k: use IEEE80211_SKB_CBJohannes Berg
ath5k still uses the "(void*) skb->cb" direct cast, use IEEE80211_SKB_CB instead. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03libertas: before sleeping, check for a command resultHolger Schurig
If we don't check for a command response early, but rather sleep, then we might sleep despite an already-received command response. This will lead to a command-timeout. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03libertas: use lbs_pr_XX instead of printkHolger Schurig
... because lbs_pr_XXX prefixes all messages with "libertas: " Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03libertas: speeds up downloading of CF firmwareHolger Schurig
Keep the timeout the same (1000*500 == 100000 * 5), but take shorter naps. Makes downloading the firmware slightly faster. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03libertas: don't spin_unlock_irq() twiceHolger Schurig
priv->driver_lock has already been unlocked some lines above. This patch fixes the sparse warning: drivers/net/wireless/libertas/main.c:792:6: warning: context problem in 'lbs_thread': '_spin_unlock_irq' expected different context drivers/net/wireless/libertas/main.c:792:6: context 'lock': wanted >= 1, got 0 Signed-of-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03ps3: gelic: updown_lock semaphore to mutexDaniel Walker
Signed-off-by: Daniel Walker <dwalker@mvista.com> Acked-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03ps3: gelic: assoc_stat_lock semaphore to mutexDaniel Walker
Signed-off-by: Daniel Walker <dwalker@mvista.com> Acked-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03ps3: gelic: scan_lock semaphore to mutexDaniel Walker
Signed-off-by: Daniel Walker <dwalker@mvista.com> Acked-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03libertas: provide reset_card() callback on OLPCDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03b43: enable meshJohannes Berg
This patch enables b43 to do mesh networking, tested against my zd1211rw dongle. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21b43: Add firmware markers supportMichael Buesch
This adds support for firmware markers. With firmware markers it's easily possible to check whether the firmware runs some codepath or not. The driver will throw a message when the firmware executes a MARKER(x). Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21b43: Add panic reason code that doesn't trigger restartMichael Buesch
Add a firmware panic reason code that doesn't trigger a restart. This is useful for firmware debugging and avoiding endless restart loops. We can use FWPANIC_DIE to halt the firmware at a well defined point. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21b43: Allow running without PCM firmwareMichael Buesch
This patch adds code to allow running the device without PCM firmware loaded. Without PCM firmware we don't have hardware accelerated crypto on devices with a core rev <= 10. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21b43: Add hooks for firmware debuggingMichael Buesch
This patch adds some hooks for firmware debugging. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21mac80211: use multi-queue master netdeviceJohannes Berg
This patch updates mac80211 and drivers to be multi-queue aware and use that instead of the internal queue mapping. Also does a number of cleanups in various pieces of the code that fall out and reduces internal mac80211 state size. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21b43: Fix typo in firmware file name for 802.11 cores with rev 13Larry.Finger@lwfinger.net
When the patch for the BCM4311 rev 2 was prepared, I misread the specs and coded the wrong file name for the initvals firmware. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21zd1211rw: Use DMA-aware buffer for usb transferAtsushi Nemoto
The zd1211rw driver uses unaligned stack buffer for USB control message. But it might cause stack corruption on non-coherent platform, such as MIPS. Use DMA-aware buffers for USB transfer. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21mac80211: move TX info into skb->cbJohannes Berg
This patch converts mac80211 and all drivers to have transmit information and status in skb->cb rather than allocating extra memory for it and copying all the data around. To make it fit, a union is used where only data that is necessary for all steps is kept outside of the union. A number of fixes were done by Ivo, as well as the rt2x00 part of this patch. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21mac80211: use rate index in TX controlJohannes Berg
This patch modifies struct ieee80211_tx_control to give band info and the rate index (instead of rate pointers) to drivers. This mostly serves to reduce the TX control structure size to make it fit into skb->cb so that the fragmentation code can put it there and we can think about passing it to drivers that way in the future. The rt2x00 driver update was done by Ivo, thanks. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21mac80211: let drivers wake but not start queuesJohannes Berg
Having drivers start queues is just confusing, their ->start() callback can block and do whatever is necessary, so let mac80211 start queues and have drivers wake queues when necessary (to get packets flowing again right away.) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: trigger event log from debugfsEster Kummer
This patch adds a trigger for event log printing to debugfs. It removes the triger from sysfs. Signed-off-by: Ester Kummer <ester.kummer@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: refactor pci prob flowTomas Winkler
This patch refactores pci prob flow. It moves mac80211 registration to the end, otherwise there is a race between error path in pci_probe and mac_start. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: add debugfs to disable/enable run time calibrationTomas Winkler
This patch adds functionality to debugfs to enable or disable chain noise or sensitivity calibrations. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: remove 4965 remainings in iwl-eeprom.c fileTomas Winkler
The patch cleans up 4965 remaings from iwl-eeprom.c file. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: iwl5000 WiFi/WiMax coexistenceRon Rindjunsky
This patch adds WiFi/WiMax coexistence to iwl5000. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: add ucode init flow handling for iwl5000Ron Rindjunsky
This patch adds all the handlers and functions needed for ucode initialization flow. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: add ucode loaders for iwl5000Ron Rindjunsky
This patch adds ucode initialization handler and functions to load ucode for iwl5000 NIC. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: add rx_handlers stub for iwl5000Ron Rindjunsky
This patch adds rx_handler_setup stub to iwl5000. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: rename and move Tx queue activation/deactivationRon Rindjunsky
This patch moves iwl4965_txq_ctx_activate and iwl4965_txq_ctx_deactivate to iwl-dev.h and removes 4965 prefix from their names. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: clean up and bug fix for securityEmmanuel Grumbach
This patch cleans up code in security. 1) uses the new pointer to ieee80211_key_conf passed with the tx_control. 2) resolves bug reported by Mirco Tischler (sends ADD_STA in ASYNC mode) 3) resolves bug reported by Volker Braun regarding dynamic WEP 4) drops a WEP packet which has been garbaged by firmware. This can happen upon rekeying. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: don't switch to SGI if not supported by APEmmanuel Grumbach
This patch fixes SGI support. RS didn't look at the capabilities of the AP before switching to SGI, this should lead to a stall in the traffic with an AP that doesn't support SGI. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Guy Cohen <guy.cohen@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: move TX code into iwl-tx.cTomas Winkler
This patch moves the sending part of the TX code into iwl-tx.c including sending host commands. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: refactor ieee80211_get_qos_ctrlTomas Winkler
This patch refactors ieee80211_get_qos_ctrl function and its usage in iwlwifi drivers. Function is moved as inline into iwl-helpers.h. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: remove 4956 form iwl4965_tx_cmdTomas Winkler
This patch renames iwl4965_tx_cmd to iwl_tx_cmd and cleans collateral code. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: move more station managment into iwl-sta.cTomas Winkler
This patch moves station management functions into iwl-sta.c (iwlcore). Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: move iwl_bcast_addr to iwlcoreTomas Winkler
This patch renames iwl4965_broadcast_addr to iwl_bcast_addr and moves it to iwlcore. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: remove 4965 from iwl4965_rate_infoTomas Winkler
This patch removes 4965 from iwl4965_rate_info structure and associated variables. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: remove 4965 prefix from iwl4965_frameTomas Winkler
This patch removes 4965 from iwl4965_frame struct and handling functions. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: remove 4965 from iwl4965_tx_queue_update_write_ptrTomas Winkler
This patch renames iwl4965_tx_queue_update_write_ptr to iwl_txq_update_write_ptr. This is a preparation for moving to iwl-tx.c. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21iwlwifi: get_hw_cmd_sizeGregory Greenman
This patch introduces a new handler get_hw_cmd_size in hcmd_utils, which should adjust the size of the command sent to the microcode according to the current nic. It also changes the RXON flow to make usage of this new handler. The patch also adds iwl_rxon_cmd structure which is supperset for 5000 HW and 4965. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 21:23:47 +0000