aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2008-11-10iwl3945: remove dead codeJohannes Berg
Was wondering about this code since supposedly the firmware will add the SSID element. Turns out it's dead, so remove it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: remove useless NULL initialisersJohannes Berg
When I added .set_frag_threshold I didn't realise it was already there which now generated a sparse warning. Therefore, remove the .set_frag_threshold NULL initialiser, and while at it all the other useless ones. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10p54: eliminate warning for uninitialized variable 'tim_len'John W. Linville
drivers/net/wireless/p54/p54common.c: In function ‘p54_tx’: drivers/net/wireless/p54/p54common.c:1058: warning: ‘tim_len’ may be used uninitialized in this function Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10p54: AP & Ad-hoc testingChristian Lamparter
This patch finally adds all necessary code to test Ad-hoc & AP mode with p54. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10p54: put broadcast frames into the right queuesChristian Lamparter
stlc45xx's specs finally brought some light what all the 4 extra queues for. now CAB data and managment frames have their own queue. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10p54: more definitions form lmac_longbow.h and pda.hChristian Lamparter
This patch ports more useful features to p54 - PDR definitions for the synth chips & regulatory domain. - honour IEEE80211_TX_CTL_ASSIGN_SEQ flag, if it's set. - adds some lost mutex_lock & mutex_unlock. - replace two more "magic values" that sneaked past. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10p54: introduce new names for device firmwaresChristian Lamparter
Johannes thought it would have been a good idea to change the firmware names. Note: we still have fallbacks in case our users don't want to "break their running system", but we won't advertise them with MODULE_FIRMWARE. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10netdevice libertas: Fix directly reference of netdev->privWang Chen
We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. OK, becasue Dave S. Miller said, "every direct netdev->priv usage is a bug", and I want to kill netdev->priv later, I decided to convert all the direct reference of netdev->priv first. Different to readonly reference of netdev->priv, in this driver, netdev->priv was changed. I use netdev->ml_priv to replace netdev->priv. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-07net: Guaranetee the proper ordering of the loopback device. v2Eric W. Biederman
I was recently hunting a bug that occurred in network namespace cleanup. In looking at the code it became apparrent that we have and will continue to have cases where if we have anything going on in a network namespace there will be assumptions that the loopback device is present. Things like sending igmp unsubscribe messages when we bring down network devices invokes the routing code which assumes that at least the loopback driver is present. Therefore to avoid magic initcall ordering hackery that is hard to follow and hard to get right insert a call to register the loopback device directly from net_dev_init(). This guarantes that the loopback device is the first device registered and the last network device to go away. But do it carefully so we register the loopback device after we clear dev_boot_phase. Signed-off-by: Eric W. Biederman <ebiederm@maxwell.aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-07Revert "net: Guaranetee the proper ordering of the loopback device."David S. Miller
This reverts commit ae33bc40c0d96d02f51a996482ea7e41c5152695.
2008-11-07Merge branch 'davem-next' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2008-11-07fmvj18x_cs: write interrupt ack bit for lan and modem to work simultaneously.Komuro
Write interrupt ack bit in fjn_interrupt for lan and modem to work simultaneously. Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-06Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/ath5k/base.c net/8021q/vlan_core.c
2008-11-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net: Fix recursive descent in __scm_destroy(). iwl3945: fix deadlock on suspend iwl3945: do not send scan command if channel count zero iwl3945: clear scanning bits upon failure ath5k: correct handling of rx status fields zd1211rw: Add 2 device IDs Fix logic error in rfkill_check_duplicity iwlagn: avoid sleep in softirq context iwlwifi: clear scanning bits upon failure Revert "ath5k: honor FIF_BCN_PRBRESP_PROMISC in STA mode" tcp: Fix recvmsg MSG_PEEK influence of blocking behavior. netfilter: netns ct: walk netns list under RTNL ipv6: fix run pending DAD when interface becomes ready net/9p: fix printk format warnings net: fix packet socket delivery in rx irq handler xfrm: Have af-specific init_tempsel() initialize family field of temporary selector
2008-11-06iwl3945: fix deadlock on suspendZhu, Yi
This patch fixes iwl3945 deadlock during suspend by moving notify_mac out of iwl3945 mutex. This is a portion of the same fix for iwlwifi by Tomas. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-06iwl3945: do not send scan command if channel count zeroReinette Chatre
Do not send scan command if no channels to scan. This avoids a Microcode error as reported in: http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1650 http://bugzilla.kernel.org/show_bug.cgi?id=11806 http://marc.info/?l=linux-wireless&m=122437145211886&w=2 Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-06iwl3945: clear scanning bits upon failureMohamed Abbas
This patch ensures we clear any scan status bit when an error occurs while sending the scan command. It is the implementation of patch: "iwlwifi: clear scanning bits upon failure" for iwl3945. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-06ath5k: correct handling of rx status fieldsBob Copeland
ath5k_rx_status fields rs_antenna and rs_more are u8s, but we were setting them with bitwise ANDs of 32-bit values. As a consequence, jumbo frames would not be discarded as intended. Then, because the hw rate value of such frames is zero, and, since "ath5k: rates cleanup", we do not fall back to the basic rate, such packets would trigger the following WARN_ON: ------------[ cut here ]------------ WARNING: at net/mac80211/rx.c:2192 __ieee80211_rx+0x4d/0x57e [mac80211]() Modules linked in: ath5k af_packet sha256_generic aes_i586 aes_generic cbc loop i915 drm binfmt_misc acpi_cpufreq fan container nls_utf8 hfsplus dm_crypt dm_mod kvm_intel kvm fuse sbp2 snd_hda_intel snd_pcm_oss snd_pcm snd_mixer_oss snd_seq_dummy snd_seq_oss arc4 joydev hid_apple ecb snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device usbhid appletouch mac80211 sky2 snd ehci_hcd ohci1394 bitrev crc32 sr_mod cdrom rtc sg uhci_hcd snd_page_alloc cfg80211 ieee1394 thermal ac battery processor button evdev unix [last unloaded: ath5k] Pid: 0, comm: swapper Tainted: G W 2.6.28-rc2-wl #14 Call Trace: [<c0123d1e>] warn_on_slowpath+0x41/0x5b [<c012005d>] ? sched_debug_show+0x31e/0x9c6 [<c012489f>] ? vprintk+0x369/0x389 [<c0309539>] ? _spin_unlock_irqrestore+0x54/0x58 [<c011cd8f>] ? try_to_wake_up+0x14f/0x15a [<f81918cb>] __ieee80211_rx+0x4d/0x57e [mac80211] [<f828872a>] ath5k_tasklet_rx+0x5a1/0x5e4 [ath5k] [<c013b9cd>] ? clockevents_program_event+0xd4/0xe3 [<c01283a9>] tasklet_action+0x94/0xfd [<c0127d19>] __do_softirq+0x8c/0x13e [<c0127e04>] do_softirq+0x39/0x55 [<c0128082>] irq_exit+0x46/0x85 [<c010576c>] do_IRQ+0x9a/0xb2 [<c010461c>] common_interrupt+0x28/0x30 [<f80e934a>] ? acpi_idle_enter_bm+0x2ad/0x31b [processor] [<c02976bf>] cpuidle_idle_call+0x65/0x9a [<c010262c>] cpu_idle+0x76/0xa6 [<c02fb402>] rest_init+0x62/0x64 Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-06zd1211rw: Add 2 device IDsDaniel Drake
07fa/1196 Bewan BWIFI-USB54AR: Tested by night1308, this device is a ZD1211B with an AL2230S radio. 0ace/b215 HP 802.11abg: Tested by Robert Philippe Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-06iwlagn: avoid sleep in softirq contextJohn W. Linville
__ieee80211_tasklet_handler -> __ieee80211_rx -> __ieee80211_rx_handle_packet -> ieee80211_invoke_rx_handlers -> ieee80211_rx_h_decrypt -> ieee80211_crypto_tkip_decrypt -> ieee80211_tkip_decrypt_data -> iwl4965_mac_update_tkip_key -> iwl_scan_cancel_timeout -> msleep Ooops! Avoid the sleep by changing iwl_scan_cancel_timeout with iwl_scan_cancel and simply returning on failure if the scan persists. This will cause hardware decryption to fail and we'll handle a few more frames with software decryption. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-06iwlwifi: clear scanning bits upon failureMohamed Abbas
In iwl_bg_request_scan function, if we could not send a scan command it will go to done. In done it does the right thing to call mac80211 with scan complete, but the problem is STATUS_SCAN_HW is still set causing any future scan to fail. Fix by clearing the scanning status bits if scan fails. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-06Revert "ath5k: honor FIF_BCN_PRBRESP_PROMISC in STA mode"John W. Linville
Unfortunately, the result was that mac80211 didn't see all the beacons it actually wanted to see. This caused lost associations. Hopefully we can revisit this when mac80211 is less greedy about seeing beacons directly... This reverts commit 063279062a8c530cc90fb77797db16c49c905b26. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-06SMSC LAN911x and LAN921x vendor driverSteve Glendinning
Attached is a driver for SMSC's LAN911x and LAN921x families of embedded ethernet controllers. There is an existing smc911x driver in the tree; this is intended to replace it. Dustin McIntire (the author of the smc911x driver) has expressed his support for switching to this driver. This driver contains workarounds for all known hardware issues, and has been tested on all flavours of the chip on multiple architectures. This driver now uses phylib, so this patch also adds support for the device's internal phy Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: Bahadir Balban <Bahadir.Balban@arm.com> Signed-off-by: Dustin Mcintire <dustin@sensoria.com> Signed-off-by: Bill Gatliff <bgat@billgatliff.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-06ehea: Fix some whitespace issuesHannes Hering
This patch removes some trailing whitespaces and spaces before tabs. Signed-off-by: Hannes Hering <hering2@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-06sfc: Do not reset when hardware monitor detects a faultBen Hutchings
The TX watchdog should trigger a reset, but a temperature/power alarm should not as this is unlikely to solve the problem. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-06sfc: Use lm87 and lm90 drivers for board temperature/power monitoringBen Hutchings
Add board monitoring to periodic work whenever link is down. For SFE4001, report when a fault has caused the PHY to turn off. For SFE4002, switch XFP PHY into low-power state in case of a fault. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-06sfc: Expose flash region storing boot code as MTDBen Hutchings
The boot code that appears as a PCI expansion ROM on the SFC4000 is stored in flash. Expose this as a standard MTD device to allow for in-place upgrades. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-06sfc: Clean up non-volatile memory partitioningBen Hutchings
Move flash and EEPROM partition boundary constants into spi.h and rename them to be consistent. Add a comment on the partitioning. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-06sfc: Correct address of gPXE boot configuration in EEPROMBen Hutchings
Due to a hardware bug, the originally assigned range cannot reliably be used for boot configuration and must not be modifiable through ethtool. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-06bonding: alternate agg selection policies for 802.3adJay Vosburgh
This patch implements alternative aggregator selection policies for 802.3ad. The existing policy, now termed "stable," selects the active aggregator by greatest bandwidth, and only reselects a new aggregator if the active aggregator is entirely disabled (no more ports or all ports down). This patch adds two new policies: bandwidth and count, selecting the active aggregator by total bandwidth (like the stable policy) or by the number of ports in the aggregator, respectively. These two policies also differ from the stable policy in that they will reselect the active aggregator when availability-related changes occur in the bond (e.g., link state change). This permits "gang failover" within 802.3ad, allowing redundant aggregators along parallel paths to always maintain the "best" aggregator as the active aggregator (rather than having to wait for the active to entirely fail). This patch also updates the driver version to 3.5.0. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-06bonding: Fix ALB mode to balance traffic on VLANsJay Vosburgh
The current ALB function that processes incoming ARPs does not handle traffic for VLANs configured above bonding. This causes traffic on those VLANs to all be assigned the same slave. This patch corrects that misbehavior by locating the bonding interface nested below the VLAN interface. Bug reported by Sven Anders <anders@anduras.de>, who also tested an earlier version of this patch and confirmed that it resolved the problem. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-06bonding: send IPv6 neighbor advertisement on failoverBrian Haley
This patch adds better IPv6 failover support for bonding devices, especially when in active-backup mode and there are only IPv6 addresses configured, as reported by Alex Sidorenko. - Creates a new file, net/drivers/bonding/bond_ipv6.c, for the IPv6-specific routines. Both regular bonds and VLANs over bonds are supported. - Adds a new tunable, num_unsol_na, to limit the number of unsolicited IPv6 Neighbor Advertisements that are sent on a failover event. Default is 1. - Creates two new IPv6 neighbor discovery functions: ndisc_build_skb() ndisc_send_skb() These were required to support VLANs since we have to be able to add the VLAN id to the skb since ndisc_send_na() and friends shouldn't be asked to do this. These two routines are basically __ndisc_send() split into two pieces, in a slightly different order. - Updates Documentation/networking/bonding.txt and bumps the rev of bond support to 3.4.0. On failover, this new code will generate one packet: - An unsolicited IPv6 Neighbor Advertisement, which helps the switch learn that the address has moved to the new slave. Testing has shown that sending just the NA results in pretty good behavior when in active-back mode, I saw no lost ping packets for example. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-05net: Guaranetee the proper ordering of the loopback device.Eric W. Biederman
I was recently hunting a bug that occurred in network namespace cleanup. In looking at the code it became apparrent that we have and will continue to have cases where if we have anything going on in a network namespace there will be assumptions that the loopback device is present. Things like sending igmp unsubscribe messages when we bring down network devices invokes the routing code which assumes that at least the loopback driver is present. Therefore to avoid magic initcall ordering hackery that is hard to follow and hard to get right insert a call to register the loopback device directly from net_dev_init(). This guarantes that the loopback device is the first device registered and the last network device to go away. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: xfrm: Fix xfrm_policy_gc_lock handling. niu: Use pci_ioremap_bar(). bnx2x: Version Update bnx2x: Calling netif_carrier_off at the end of the probe bnx2x: PCI configuration bug on big-endian bnx2x: Removing the PMF indication when unloading mv643xx_eth: fix SMI bus access timeouts net: kconfig cleanup fs_enet: fix polling XFRM: copy_to_user_kmaddress() reports local address twice SMC91x: Fix compilation on some platforms. udp: Fix the SNMP counter of UDP_MIB_INERRORS udp: Fix the SNMP counter of UDP_MIB_INDATAGRAMS drivers/net/smc911x.c: Fix lockdep warning on xmit.
2008-11-04drivers: remove duplicated #includeJianjun Kong
Signed-off-by: Jianjun Kong <jianjun@zeuux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-03drivers/net: Kill now superfluous ->last_rx stores.David S. Miller
The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Drivers need not do it any more. Some cases had to be skipped over because the drivers were making use of the ->last_rx value themselves. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03bonding, net: Move last_rx update into bonding recv logicJay Vosburgh
The only user of the net_device->last_rx field is bonding. This patch adds a conditional update of last_rx to the bonding special logic in skb_bond_should_drop, causing last_rx to only be updated when the ARP monitor is running. This frees network device drivers from the necessity of updating last_rx, which can have cache line thrash issues. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03niu: Use pci_ioremap_bar().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03tg3: Update version to 3.95Matt Carlson
This patch updates the version to 3.95. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03broadcom: Add support for BCM50610Matt Carlson
This patch adds the BCM50610 to the list of phys supported by the broadcom driver. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03broadcom: Refine expansion register access routineMatt Carlson
This patch makes the expansion register access routines a little more formal. They will be used by the following bcm50610 support patch. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03broadcom: Add flow control supportMatt Carlson
This patch adds flow control support to Broadcom phys. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03tg3: 5785 enhancementsMatt Carlson
This patch refines support for the 5785 device. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03tg3: Refine phylib supportMatt Carlson
This patch refines the phylib support in the tg3 driver. The patch does the following things : * Rename tg3_mdio_config() to tg3_mdio_config_5785(). The 5785 will be the only device that will use it so the name might as well reflect that. * Fix a memory leak if mdiobus_register() fails. * Add code to deal with phy device detection failures. * Add code to correct the supported list of phy features based on the MAC <=> PHY interface. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03tg3: Allow WOL for phylib controlled Broadcom physMatt Carlson
This patch allows WOL to be enabled for Broadcom phys under phylib control. The only exception is the AC131, which has a completely different register set. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03tg3: Refine power management and WOL codeMatt Carlson
Commit 12dac0756d357325b107fe6ec24921ec38661839 ("tg3: adapt tg3 to use reworked PCI PM code") introduced the new PCI PM API to the tg3 driver. The patch was understandably conservative, so this patch elaborates on that work. The patch starts by creating a single point in tg3_set_power_state() to decide whether or not to enable WOL. The rest of the code in tg3_set_power_state() was then pivoted to use the result of this decision. The patch then makes sure the device is allowed to wakeup before reporting whether or not WOL is currently enabled. The final hunks of the patch consolidate where the WOL capability and WOL enabled flags are set to a single location. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03tg3: Move phylib report to end of tg3_init_oneMatt Carlson
Currently, phylib reports appear with a eth%d prefix. Move the line after register_netdev() and place it alongside the other informative messages. Update nearby informative messages accordingly. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03tg3: Do not enable APE on bcm5700Matt Carlson
With older versions of the NVRAM format, the driver may mistakenly determine that APE is enabled. Make sure this doesn't happen by restricting the ENABLE_APE check to devices known to have more recent NVRAM image formats. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03tg3: Reclaim TG3_FLG3_5761_5784_AX_FIXES flagMatt Carlson
This patch reclaims the TG3_FLG3_5761_5784_AX_FIXES flag. It only used twice in non-fast paths. This patch also consolidates some other places where specific 5784 AX chip revisions can be generalized. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03tg3: Preserve LAA when device control is releasedMatt Carlson
This patch moves the __tg3_set_mac_addr() function earlier in the file listing, to avoid a function prototype, and calls the function to restore the LAA after a driver unload chip reset. With this code in place, the administrator can wake the machine using the LAA. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 13:06:06 +0000