aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2005-09-21[PATCH] r8169: call proper VLAN receive functionTommy Christensen
vlan_hwaccel_rx should be used when in interrupt context. Fixes bug http://bugzilla.kernel.org/show_bug.cgi?id=5284 Signed-off-by: Tommy S. Christensen <tommy.christensen@tpack.net> Cc: Francois Romieu <romieu@fr.zoreil.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-21[PATCH] skge: check length from PHYStephen Hemminger
Cleanup receive buffer allocation and management, Add more error handling checks from PHY and bump version. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-21[PATCH] skge: expand ethtool debug register dumpStephen Hemminger
Expand the returned data for ethtool debug access to include all of the mapped PCI area; except for the small set of registers that are for diagnostic RAM access. Access to those registers will hang the system. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-21[PATCH] bonding: Fix link monitor capability check (was skge: set mac ↵nsxfreddy@gmail.com
address oops with bonding) Fix bond_enslave link monitoring warning to check use_carrier status and ethtool_ops in addition to do_ioctl. This version checks ethtool_ops as well as do_ioctl, and also uses the per-bond params.use_carrier instead of the global use_carrier. Signed-off-by: Jason R. Martin <nsxfreddy@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-19[WAN] hdlc_cisco: Fix regression introduced by skb->tail changes.Krzysztof Halasa
The following commit breaks cisco mode with my WAN drivers: author David S. Miller <davem@davemloft.net> Tue, 28 Jun 2005 22:25:31 +0000 (15:25 -0700) commit 689be43945e9ca7dd704522e55af1b8a73a994d3 "[NET]: Remove gratuitous use of skb->tail in network drivers." The following patch fixes it - please apply (cisco_hard_header does skb_push(4 bytes)). Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-18[BOND]: Fix bond_init() error path handling.Florin Malita
From: Florin Malita <fmalita@gmail.com> bond_init() is not releasing rtnl_sem after register_netdevice() and before calling unregister_netdevice() (from bond_free_all()) in the exception path. As the device registration is not completed (dev->reg_state == NETREG_REGISTERING), the call to unregister_netdevice() triggers BUG_ON(dev->reg_state != NETREG_REGISTERED). Signed-off-by: Florin Malita <fmalita@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-18Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6David S. Miller
2005-09-17[TG3]: Fix 4GB boundary tx handlingMichael Chan
Fix and simplify the workaround code for the 4GB boundary tx buffer hardware bug. 1. Need to unmap the original SKB's dma addresses if a new SKB cannot be allocated. 2. Need to pass the base flag to tigon3_4gb_hwbug_workaround() or TSO won't work properly. 3. The guilty entry and length parameters for tigon3_4gb_hwbug_workaround() are removed as they are not necessary. 4. Remove assumption that only one fragment can hit the 4GB boundary. Another fragment can hit 8GB for example. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-16[TG3]: Sparse fixes for tg3Peter Hagervall
Change 0 to NULL where appropriate. Signed-off-by: Peter Hagervall <hager@cs.umu.se> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-16[TG3]: Add AMD K8 to list of write-reorder chipsets.David S. Miller
Thanks to Andy Stewart for the report and testing debug patches from Michael Chan. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-16[PATCH] net: fix spider_net media detectionJens Osterkamp
This patch makes the driver work with any BladeCenter network switch, it used to work only with certain models. Please apply. Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-16[PATCH] 8139cp: allocate statistics space only when neededStephen Hemminger
Don't crash if ethtool statistics are requested and device is down. Fix is to allocate pci space for statistics only when needed. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-16[PATCH] bonding: plug reference count leakJay Vosburgh
Bonding leaks route structures when the ARP monitor is configured to send probes over VLANs. Originally reported by Ian Abel <ian.abel@mxtelecom.com>; his original fix was modified by Jay Vosburgh to correct coding style and to close a leak it missed. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-14[PATCH] skge: gmac register access errors in dual portStephen Hemminger
Merge of four previous patches and the Kconfig fix * Remove debug printk's * whitespace cleanup and version number change * clear interrupts, reset phy, and reset hardware on shutdown * ignore 64bit counter overflow interrupts * fix a couple of places where second port could clobber state of first port. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-14[PATCH] ixgb: correct rx_dropped countingJohn W. Linville
Do not count frames dropped by the hardware as part of rx_dropped. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-14[PATCH] e100: correct rx_dropped and add rx_missed_errorsJohn W. Linville
Do not count non-error frames dropped by the hardware as part of rx_dropped. Instead, count those frames dropped as rx_missed_errors. Also, do not count other error frames as part of rx_dropped. Finally, do not count oversized frames in rx_dropped (since they are counted as part of rx_length_errors). Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-14[PATCH] e1000: correct rx_dropped countingJohn W. Linville
Do not count frames dropped by the hardware as part of rx_dropped. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-14[PATCH] airo : fix channel number in scanmatthieu castet
this patch display the correct channel number with iwlist scan Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-14[PATCH] Correct xircom_cb use of CONFIG_NET_POLL_CONTROLLERKeith Owens
xircom_cb.c does #if CONFIG_NET_POLL_CONTROLLER instead of #ifdef, resulting in drivers/net/tulip/xircom_cb.c:120:5: warning: "CONFIG_NET_POLL_CONTROLLER" is not defined. Signed-off-by: Keith Owens <kaos@sgi.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-14[PATCH] s2io warning fixesAndrew Morton
drivers/net/s2io.c: In function `init_shared_mem': drivers/net/s2io.c:431: warning: cast from pointer to integer of different size drivers/net/s2io.c: In function `free_shared_mem': drivers/net/s2io.c:662: warning: cast from pointer to integer of different size Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-14[PATCH] sk98lin: remove PCI id info for cards for conflicting devicesStephen Hemminger
Fix PCI device id issues with sk98lin driver. 1. DLINK 530-T card has no Vital Product Data (VPD) area so the sk98lin driver won't work. (skge does however) 2. Remove commented out Yukon2 stuff 3. Restrict Linksys card to revisions that don't conflict with r8169 version. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-13[PATCH] Remove unnecessary check_region references in commentsPeter Osterlund
Remove check_region references from comments and printk statements so that searching for real users of this deprecated function gets easier. Signed-off-by: Peter Osterlund <petero2@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13[PATCH] pcmcia: add another orinoco_cs idKomuro
Add new id to orinoco_cs (corega PCCB-11). Signed-off-by: <komurojun-mbn@nifty.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Linus Torvalds
2005-09-12[BNX2]: Add support for ETHTOOL_GPERMADDR.John W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-12[TG3]: Add support for ETHTOOL_GPERMADDR.John W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-12[TG3]: Do not count non-error frames dropped by the hardware as rx_errors.John W. Linville
Instead, count them as part of rx_missed_errors. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-12[AX.25]: Rename ax25_encapsulate to ax25_hard_headerRalf Baechle
Rename ax25_encapsulate to ax25_hard_header which these days more accurately describes what the function is supposed to do. Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-12[HAMRADIO]: driver cleanupsRalf Baechle
Misc related cleanups in hamradio drivers: o Use symbolic constants instead of magic numbers o Don't try to handle the case where AX.25 isn't configured - the kernel configuration doesn't permit that. o Remove useless headers Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-11[PATCH] m68knommu: FEC eth definitions support for the 523x Coldfire ↵Greg Ungerer
processor family Add support for the FEC ethernet driver of the Freescale 523x processor family to the FEC header definitions. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-11[PATCH] m68knommu: ColdFire FEC eth driver improvementsGreg Ungerer
A few improvements to the Freescale/ColdFire FEC driver: . some formatting cleanups . add support for the FEC device in the ColdFire 523x processor family . add support for MAC address setting on MOD5272 and M5272C3 boards . don't re-read the PHY status register many times . ack status interrupt before reading status register . move printing init message to after full init (so that the ethX name is filled out for printing) Some parts of this patch submitted by Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-11[PATCH] m68knommu: config support for FEC eth of 523x Coldfire processor familyGreg Ungerer
Add configuration support for the FEC ethernet controller in the Freescale 523x processor family. Also add and option to configure the second FEC controller on some Freescale processors. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-11[PATCH] Sun HME: enable and map PCI ROM properlyWilly Tarreau
This ports the Sun GEM ROM mapping/enable fixes it sunhme (which used the same PCI ROM mapping code). Without this, I get NULL MAC addresses for all 4 ports (it's a SUN QFE). With it, I get the correct addresses (the ones printed on the label on the card). Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-11Sun GEM ethernet: enable and map PCI ROM properlyLinus Torvalds
This same patch was reported to fix the MAC address detection on sunhme (next patch). Most people seem to be running this on Sparcs or PPC machines, where we get the MAC address from their respective firmware rather than from the (previously broken) ROM mapping routines. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] janitor: tulip/de4x5: list_for_eachDomen Puncer
s/for/list_for_each/ Signed-off-by: Maximilian Attems <janitor@sternwelten.at> Signed-off-by: Domen Puncer <domen@coderock.org> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] janitor: net/ppp-generic: list_for_each_entryDomen Puncer
Make code more readable with list_for_each_entry. Signed-off-by: Maximilian Attems <janitor@sternwelten.at> Signed-off-by: Domen Puncer <domen@coderock.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] vfree and kfree cleanup in drivers/Jesper Juhl
This patch does a full cleanup of 'NULL checks before vfree', and a partial cleanup of calls to kfree for all of drivers/ - the kfree bit is partial in that I only did the files that also had vfree calls in them. The patch also gets rid of some redundant (void *) casts of pointers being passed to [vk]free, and a some tiny whitespace corrections also crept in. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] more SPIN_LOCK_UNLOCKED -> DEFINE_SPINLOCK conversionsIngo Molnar
This converts the final 20 DEFINE_SPINLOCK holdouts. (another 580 places are already using DEFINE_SPINLOCK). Build tested on x86. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] timer initialization cleanup: DEFINE_TIMERIngo Molnar
Clean up timer initialization by introducing DEFINE_TIMER a'la DEFINE_SPINLOCK. Build and boot-tested on x86. A similar patch has been been in the -RT tree for some time. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] cs89x0: add netpoll supportDeepak Saxena
Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Cc: Matt Mackall <mpm@selenic.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6 Linus Torvalds
2005-09-08[PATCH] USB: URB_ASYNC_UNLINK flag removed from the kernelAlan Stern
29 July 2005, Cambridge, MA: This afternoon Alan Stern submitted a patch to remove the URB_ASYNC_UNLINK flag from the Linux kernel. Mr. Stern explained, "This flag is a relic from an earlier, less-well-designed system. For over a year it hasn't been used for anything other than printing warning messages." An anonymous spokesman for the Linux kernel development community commented, "This is exactly the sort of thing we see happening all the time. As the kernel evolves, support for old techniques and old code can be jettisoned and replaced by newer, better approaches. Proprietary operating systems do not have the freedom or flexibility to change so quickly." Mr. Stern, a staff member at Harvard University's Rowland Institute who works on Linux only as a hobby, noted that the patch (labelled as548) did not update two files, keyspan.c and option.c, in the USB drivers' "serial" subdirectory. "Those files need more extensive changes," he remarked. "They examine the status field of several URBs at times when they're not supposed to. That will need to be fixed before the URB_ASYNC_UNLINK flag is removed." Greg Kroah-Hartman, the kernel maintainer responsible for overseeing all of Linux's USB drivers, did not respond to our inquiries or return our calls. His only comment was "Applied, thanks." Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6 Linus Torvalds
2005-09-08[PATCH] PCI: remove CONFIG_PCI_NAMESAdrian Bunk
This patch removes CONFIG_PCI_NAMES. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08[BNX2]: Fix bug in irq handler and add prefetchMichael Chan
Fix bug in bnx2_interrupt() that caused an unnecessary register read. The BNX2_PCICFG_MISC_STATUS should only be read when the status tag has not changed. Add prefetch of the status block in bnx2_msi() similar to tg3_msi(). The status block is not touched in bnx2_msi() and prefetching it will speed up bnx2_poll() that will run on the same CPU that received the MSI. Update version. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-07Merge branch 'upstream' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6
2005-09-07Merge branch 'upstream' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2005-09-07Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Linus Torvalds
2005-09-07[PATCH] bogus #if (smc91x.h)viro@ZenIV.linux.org.uk
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07[PATCH] -Wundef fixes (hamachi)viro@ZenIV.linux.org.uk
All uses of ADDRLEN are comparisons with 64 (it's an address width). added define to 32 (again, we only care about comparisons with 64) if not defined. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>