aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2008-02-28rt2x00: Add link tuner safe RX toggle statesIvo van Doorn
This adds 2 new states which both are used to toggle the RX. These new states are required for usage inside the link tuner thread, because the normal RX toggling will stop the link tuner thread. While it is possible that the link tuner thread itself is the caller of the RX toggle (when using software antenna diversity). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-28rt2x00: Fix antenna diversityIvo van Doorn
Fix 2 issues in antenna diversity selection. 1) the following statement will always return true. if ((rssi_curr - rssi_old) > -5 || (rssi_curr - rssi_old) < 5) It is cleaner to check if the absolute value is smaller then 5. 2) Only enable software diversity when default antenna setup indicates support for it. Don't select it when the hardware does not indicate support for it... Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-28gelic wireless driver needs WIRELESS_EXT supportSebastian Siewior
| CC drivers/net/ps3_gelic_wireless.o | /home/bigeasy/git/linux-2.6/drivers/net/ps3_gelic_wireless.c: In function 'gelic_wl_setup_netdev_ops': | /home/bigeasy/git/linux-2.6/drivers/net/ps3_gelic_wireless.c:2660: error: 'struct net_device' has no member named 'wireless_data' | /home/bigeasy/git/linux-2.6/drivers/net/ps3_gelic_wireless.c:2661: error: 'struct net_device' has no member named 'wireless_handlers' | make[3]: *** [drivers/net/ps3_gelic_wireless.o] Error 1 | make[2]: *** [drivers/net] Error 2 | make[1]: *** [drivers] Error 2 | make[1]: *** Waiting for unfinished jobs.... | make: *** [sub-make] Error 2 Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Acked-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-28PS3: gelic: Link the wireless net_device structure to the corresponding ↵Masakazu Mokuno
device structure Link the net_device structure of the wireless part to the corresponding device structure. Without this, the sysfs node for this net_device would not have 'device' link. Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-28rndis_wlan: fix sparse warningsJohannes Berg
It is obviously wrong to use an enum in a little endian struct, and those other enums should be declared differently. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-26[MACVLAN]: Update Kconfig to refer to iproutePatrick McHardy
Since the macvlan release I had at least 5 users asking how to configure it since the old userspace tool doesn't work with the version in the kernel. Add a pointer to the Kconfig help. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-24e1000e: remove unused read value in ASPM disable code.Auke Kok
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-24e1000e: fix spelling errors in commentsAuke Kok
Fix some spelling errors and inconsistencies in comment blocks. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-24e1000e: fix flow control denial of service possibilityJesse Brandeburg
this patch avoids a denial of service from an evildoer sending a continuous stream of flow control at our adapter that is plugged into a non-flow control enabled switch. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-24e1000e: fix flow control when using ethtool overridesJesse Brandeburg
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-24e1000e: fix link up message to show ethX:Jesse Brandeburg
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-24e1000e: 82573 can use eerd method to read eepromAuke Kok
This simplifies the 82571/2/3 family initialization a bit and removes an initialization table no longer needed. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-24ixgb: add RNBC counter - no buffer count - to ethtool statsAuke Kok
This counter is valuable to determine if the system is unable to timely return buffers to the hardware and this counter starts to increase well before the hardware starts to drop packets. If users experience rx_no_buffer_count increasing, they should increase the amount of descriptors. That will provide more buffers for the hardware and will decrease the chance of hard drops. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-24macb: Fix speed settingAtsushi Nemoto
Fix NCFGR.SPD setting on 10Mbps. This bug was introduced by conversion to generic PHY layer in kernel 2.6.23. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-24sky2: fix LED managementStephen Hemminger
Fix problems in LED management, so ethtool -p works correctly on Yukon-EC and other chips. The driver was incorrectly setting the PHY LED overide bits. Moral: read the spec sheet, not the vendor driver. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-24[netdrvr] via-rhine: Use register offset definition for WOLcgClrLaura Garcia
Use register offset definition for WOLcgClr, rather than a magic number. This patch does not change the driver behaviour. Signed-off-by: Laura Garcia Liebana <nevola@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-23net/phy/mdio_bus.c: fix a check-after-useAdrian Bunk
This patch fixes a check-after-use spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-23igb: Fix panic with NICs with 1000BASE-SX PHYBill Hayes
This patch eliminates a kernel panic with the igb driver in 2.6.25-rc2 when running on a Intel 82575 Ethernet controller with a 1000BASE-SX PHY. The panic does not happen with the 1000BASE-T PHY, only with a SX connection. Signed-off-by: Bill Hayes <bill.hayes@hp.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-23gianfar: don't pass NULL dev ptr to DMA opsBecky Bruce
Change all dma op invocations in gianfar.c to actually pass in the device pointer. Currently, the value is ignored, but it will be used going forward as we implement archdata for 32-bit powerpc. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-23sis190: read the mac address from the eeprom firstFrancois Romieu
Reading a serie of zero from the cmos sram area do not work well with is_valid_ether_addr(). Let's read the mac address from the eeprom first as it seems more reliable. Fix for http://bugzilla.kernel.org/show_bug.cgi?id=9831 Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-23tlan: add static to function definitionsHarvey Harrison
The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-23pcnet_cs: if AX88190-based card, printk "use axnet_cs instead" message.Komuro
* If ConfigBase is 0x03c0 && manfid is (0x0149,0xc1ab), printk "use axnet_cs instead" message. Actually, most of the card with manfid(0x0149, 0xc1ab) use pcnet_cs driver. * remove entry (0x021b, 0x0202) Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-23drivers/net/cs89x0.c: compilation warning fixLeonardo Potenza
Suppress the warning message about the 'netcard_portlist' defined but not used. Signed-off-by: Leonardo Potenza <lpotenza@inwind.it> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-23virtio_net: Fix oops on early interrupts - introduced by virtio reset codeChristian Borntraeger
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-23uli526x partially recognizing interfaceGrant Grundler
Patch fixes: http://bugzilla.kernel.org/show_bug.cgi?id=5839 Init sequence needs to poll phy until phy reset is complete. This is the same problem that I fixed in 2002 in tulip driver. Thanks to manty@manty.net for testing this patch. Thanks to Pozsar Balazs <pozsy@uhulinux.hu> for posting/testing a similar patch before: http://lkml.org/lkml/2006/8/21/45 Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-23igb: fix legacy mode irq issueAndy Gospodarek
I booted an igb kernel with the option pci=nomsi and instantly noticed that interrupts no longer worked on my igb device. I took a look at the interrupt initialization and quickly discovered a comment stating: "DO NOT USE EIAME or IAME in legacy mode" It seemed a bit odd that bits to enable IAM were being set in legacy interrupt mode, so I dropped out the following parts and interrupts began working fine again. [Updated code flow and a nitpick spelling error --Auke] Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-23fs_enet: Don't call phy_mii_ioctl() in atomic context.Scott Wood
The lock acquisition in fs_ioctl() does not appear to actually be necessary, and thus is simply removed. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-23ehea: add kdump supportThomas Klein
This patch adds kdump support to the ehea driver. As the firmware doesn't free resource handles automatically, the driver has to run an as simple as possible free resource function in case of a crash shutdown. The function iterates over two arrays freeing all resource handles which are stored there. The arrays are kept up-to-date during normal runtime. The crash handler fn is triggered by the recently introduced PPC crash shutdown reg/unreg functions. Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-23Merge branch 'master' of ../linux-2.6/David S. Miller
2008-02-23tg3: ethtool phys_id defaultStephen Hemminger
When asked to blink LEDs the tg3 driver behaves when using: ethtool -p ethX The default value for data is zero, and other drivers interpret this as blink forever (or at least a really long time). The tg3 driver interprets this as blink once. All drivers should have the same behaviour. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-23[BNX2]: Update version to 1.7.4.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-23[BNX2]: Disable parallel detect on an HP blade.Michael Chan
Because of some board issues, we need to disable parallel detect on an HP blade. Without this patch, the link state can become stuck when it goes into parallel detect mode. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-23[BNX2]: More 5706S link down workaround.Michael Chan
The previous patches to workaround the 5706S on an HP blade were not sufficient. The link state still does not change properly in some cases. This patch adds polling to make it completely reliable. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-21Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] pasemi: Remove warning in mpic_pasemi_msi.c [POWERPC] pasemi: Register i2c devices at boot [POWERPC] cell: fix spurious false return from spu_trap_data_{map,seg} [POWERPC] Fix warning in pseries/power.c [POWERPC] Fix bootwrapper builds with older gcc versions [POWERPC] Fix dt_mem_next_cell() to read the full address [POWERPC] Kill sparse warnings in kprobes [POWERPC] spufs: fix scheduler starvation by idle contexts [POWERPC] 44x: Add multiplatform defconfig [POWERPC] 44x: Fix Kconfig formatting [POWERPC] 4xx: Update defconfigs for 2.6.25 [POWERPC] 4xx: Remove "i2c" and "xxmii-interface" device_types from dts [POWERPC] PPC440EP Interrupt Triggering and Level Settings [POWERPC] net: NEWEMAC: Remove "rgmii-interface" from rgmii matching table
2008-02-20zd1211rw: fix sparse warningsJohannes Berg
This silences sparse when run on zd1211rw. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-20rtl818x: fix sparse warningsJohannes Berg
This silences a few sparse warnings. There are two more where I can't follow the code. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-20ath5k: Fix build warnings on some 64-bit platforms.David Miller
'u64' is not necessarily 'unsigned long long' drivers/net/wireless/ath5k/base.c: In function 'ath5k_beacon_update_timers': drivers/net/wireless/ath5k/base.c:2130: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64' drivers/net/wireless/ath5k/base.c:2130: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64' drivers/net/wireless/ath5k/base.c: In function 'ath5k_intr': drivers/net/wireless/ath5k/base.c:2391: warning: format '%llx' expects type 'long long unsigned int', but argument 6 has type 'u64' Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-20WDEV, ath5k, don't return int from bool functionJiri Slaby
sparse sees int -> bool cast as an error: hw.c:3754:10: warning: cast truncates bits from constant value (ffffffea becomes 0) Fix it by converting the rettype to int and check appropriately. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Nick Kossifidis <mickflemm@gmail.com> Cc: Luis R. Rodriguez <mcgrof@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-20WDEV: ath5k, fix lock imbalanceJiri Slaby
Omitted lock causes sparse warning drivers/net/wireless/ath5k/base.c:1682:1: warning: context imbalance in 'ath5k_tasklet_rx' - different lock contexts for basic block Add the lock to the guilty fail path. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Cc: Luis R. Rodriguez <mcgrof@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-20p54usb: add USB ID for Linksys WUSB54G ver 2John W. Linville
Based on report from Cavan Carroll <cavancarroll@hotmail.com>: http://bugzilla.kernel.org/show_bug.cgi?id=9863 Cc: Cavan Carroll <cavancarroll@hotmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-20p54usb: add USB ID for Phillips CPWUA054Ivo Couckuyt
Retarget of an old patch against prism54usb in linux-wireless archive: http://marc.info/?l=linux-wireless&m=117449935810254&w=2 Cc: Ivo Couckuyt <iv0co@yahoo.co.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-20veth: fix dev refcount raceDaniel Lezcano
When deleting the veth driver, veth_close calls netif_carrier_off for the two extremities of the network device. netif_carrier_off on the peer device will fire an event and hold a reference on the peer device. Just after, the peer is unregistered taking the rtnl_lock while the linkwatch_event is scheduled. If __linkwatch_run_queue does not occurs before the unregistering, unregister_netdevice will wait for the dev refcount to reach zero holding the rtnl_lock and linkwatch_event will wait for the rtnl_lock and hold the dev refcount. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-20[NIU]: More BMAC alt MAC address fixes.Matheos Worku
From: Matheos Worku <Matheos.Worku@Sun.COM> 1) niu_enable_alt_mac() needs to be adjusted so that the mask is computed properly for the BMAC case. 2) BMAC has 6 alt MAC addresses available, not 7. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (60 commits) [NIU]: Bump driver version and release date. [NIU]: Fix BMAC alternate MAC address indexing. net: fix kernel-doc warnings in header files [IPV6]: Use BUG_ON instead of if + BUG in fib6_del_route. [IPV6]: dst_entry leak in ip4ip6_err. (resend) bluetooth: do not move child device other than rfcomm bluetooth: put hci dev after del conn [NET]: Elminate spurious print_mac() calls. [BLUETOOTH] hci_sysfs.c: Kill build warning. [NET]: Remove MAC_FMT net/8021q/vlan_dev.c: Use print_mac. [XFRM]: Fix ordering issue in xfrm_dst_hash_transfer(). [BLUETOOTH] net/bluetooth/hci_core.c: Use time_* macros [IPV6]: Fix hardcoded removing of old module code [NETLABEL]: Move some initialization code into __init section. [NETLABEL]: Shrink the genl-ops registration code. [AX25] ax25_out: check skb for NULL in ax25_kick() [TCP]: Fix tcp_v4_send_synack() comment [IPV4]: fix alignment of IP-Config output Documentation: fix tcp.txt ...
2008-02-18[NIU]: Bump driver version and release date.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-18[NIU]: Fix BMAC alternate MAC address indexing.Matheos Worku
BMAC port alternate MAC address index needs to start at 1. Index 0 is used for the main MAC address. Signed-off-by: Matheos Worku <matheos.worku@sun.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-15[POWERPC] net: NEWEMAC: Remove "rgmii-interface" from rgmii matching tableStefan Roese
With the removal the the "rgmii-interface" device_type property from the dts files, the newemac driver needs an update to only rely on compatible property. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-02-15Merge branch 'upstream-davem' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2008-02-15Merge branch 'fixes' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6
2008-02-15b43legacy: Add driver load messagesStefano Brivio
This adds printk messages with basic information about the driver being loaded. This information includes a summary of the compiled-in features, which simplifies bug-reporting and debugging a lot. Also a firmware ID is printed. This is a unique identifier blob for a specific version of the firmware. This ID is attached to a specific version of the firmware blob in b43-fwcutter (see fwcutter git). This helps users to select the right firmware for their device. This also makes it possible to use automated scripts to fetch and extract the right firmware for the driver. (The script will grep the .ko for the "Firmware-ID: xxx" string.) While the driver might still support other versions of the firmware for backward compatibility, this will always print out the officially supported version, which people _should_ use. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>