aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2006-12-02e1000: Only set IDE for tx when we are using TIDV/TADVJesse Brandeburg
Spec fix: don't set IDE unless we are actually setting the tx int delay time. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
2006-12-02e1000: rename ICH8 flash macrosJeff Kirsher
ICH8 will soon be followed by newer chipsets bearing the same acronym, thus we remove the '8' and make it independent of the version number in the platform name. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-12-02e1000: add queue restart counterJesse Brandeburg
Add a netif_wake/start_queue counter to the ethtool statistics to indicated to the user that their transmit ring could be too small for their workload. Signed-off-by: Jesse brandeburg <jesse.brandeburg@intel.com> Cc: Jamal Hadi <hadi@cyberus.ca> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-12-02e1000: New hardware supportAuke Kok
Add support for a Low Profile quad-port PCI-E adapter and 2 variants of the ICH8 systems' onboard NIC's. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-12-02e1000: Remove unneeded and unwanted memsetsJesse Brandeburg
This memsetting was added in a paranoid rage debugging TX hangs, but are no longer of importance. We can beef up the performance quite a bit removing them. Make sure to fill in next_to_watch to allow this. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
2006-12-02e1000: simplify skb_put call.Auke Kok
Simplify two calls to skb_put by removing one call to it. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-12-02e1000: reorder pci-e infor structJeff Kirsher
Order pci-e capability struct according to bus/pci bus width ordering preserving the hard pci spec numbers. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2006-12-02e1000: fix VR powerdown codeJeff Kirsher
On ich systems during PHY power down to D3, the voltage regulators were left on. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2006-12-02e1000: add mmiowb() for IA64 to sync tail writesJesse Brandeburg
IA64 SMP systems were seeing TX issues with multiple cpu's attempting to write tail registers unordered. This mmiowb() fixes the issue. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
2006-12-02e1000: Enble early receive (ERT) on 82573Auke Kok
Enable early receives on 82573 for jumbo frame performance. Jumbo's are only supported on 82573L with ASPM disabled. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-12-02e1000: FIX: enable hw TSO for IPV6Auke Kok
Enable TSO for IPV6. All e1000 hardware supports it. This reduces CPU utilizations by 50% when transmitting IPv6 frames. Fix symbol naming enabling ipv6 TSO. Turn off TSO6 for 10/100. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-12-02e1000: Remove DISABLE_MULR debug codeAuke Kok
Remove debugging code disabling MULR (multiple reads). It's not usable for a wide audience and there are no known problems with MULR right now. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-12-02e1000: whitespace changes, comments, typosAuke Kok
Small whitespace changes, comment changes, typo fixes. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-12-02[PATCH] zd1211rw: Add ID for ZyXEL G-220Daniel Drake
Tested by Newsome on IRC zd1211 chip 0586:3401 v4330 high 00-13-49 AL2230_RF pa0 g--- Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02Add NetXen 1G/10G ethernet driver.Amit S. Kale
Signed-off-by: Amit S. Kale <amitkale@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] bcm43xx: add PCI-E codeStefano Brivio
The current bcm43xx driver does not contain code to handle PCI-E interfaces such as the BCM4311 and BCM4312. This patch, originally written by Stefano Brivio adds the necessary code to enable these interfaces. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] prism54: use BUILD_BUG_ONAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] atmel: output signal strength informationHolden Karau
Output signal strength information as part of iwlist scan - before it did not output any signal strength related information. Signed-off-by: Holden Karau <holden@pigscanfly.ca> Cc: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] prism54: whitespace cleanupDmitry Torokhov
NET: prism54 - whitespace cleanup Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] prism54: fix potential race in reset schedulingDmitry Torokhov
NET: prism54 - fix potential race in reset scheduling There appears to be a race in reset scheduling logic - thread responsible for reseting the interface should clear "reset pending" flag before restarting the queue, otherwise timeout handler might not schedule another reset even if it is needed. This race is mostly theoretical as far as I can see but a race nonetheless. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] atmel: whitespace cleanupDmitry Torokhov
NET: atmel: whitespace cleanup Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] atmel: use ARRAY_SIZE()Dmitry Torokhov
NET: atmel - switch to using ARRAY_SIZE() Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] atmel: save on array initializationDmitry Torokhov
NET: atmel - do not initialize array over and over again Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] ieee80211: Move IV/ICV stripping into ieee80211_rxDaniel Drake
This patch adds a host_strip_iv_icv flag to ieee80211 which indicates that ieee80211_rx should strip the IV/ICV/other security features from the payload. This saves on some memmove() calls in the driver and seems like something that belongs in the stack as it can be used by bcm43xx, ipw2200, and zd1211rw I will submit the ipw2200 patch separately as it needs testing. This patch also adds some sensible variable reuse (idx vs keyidx) in ieee80211_rx Signed-off-by: Daniel Drake <dsd@gentoo.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: Add 3 more device IDsDaniel Drake
iNexQ UR055g: Tested by Todor T Zviskov zd1211 chip 1435:0711 v4330 high 00-10-a7 AL2230_RF pa0 g-- ZyXEL AG-225, FCC ID SI5WUB410: Tested by Nathan zd1211 chip 0586:3409 v4810 full 00-13-49 AL7230B_RF pa0 g--- Yakumo QuickWLAN USB: Tested by EdB zd1211 chip 0b3b:1630 v4330 high 00-01-36 RF2959_RF pa0 --- Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] bcm43xx: output proper link quality with scansLarry Finger
The bcm43xx-softmac driver fails to set two quantities needed for iwlist to compute wireless quality when scanning. As a result, userland programs using the quality to determine the best connection fail. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] 8390 fixes - the final chunk (h8300)Al Viro
The rest of 8390 conversions; ifdef cascade in 8390.h is gone now. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] 8390 cleanup - etherh iomem annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] 8390 fixes - m68k oddballsAl Viro
more 8390 conversions - mac8390, zorro8390 and hydra got the same treatment as arm etherh; one more case in 8390.h ifdef cascade is gone. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] beginning of 8390 fixes - generic and arm/etherhAl Viro
etherh and a handful of other odd drivers use different macros when building 8390.c. Since we generate a single 8390.o and then link with it, in any config with both oddball and normal 8390-based driver we will end up with breakage in at least one of them. Solution: take most of 8390.c into lib8390.c and have 8390.c, etherh.c and the rest of oddballs #include it. Helper macros are taken from 8390.h to whoever includes lib8390.c. That way odd drivers get separate instances of compiled 8390 stuff and stop stepping on each other's toes. 8390.h gets cleaned up - we don't have the cascade of ifdefs in there and are left with the stuff that can be used by any 8390-based driver. Current problems are exactly because of that cascade - we attempt to choose the set of helpers by looking at config and that, of course, doesn't work well when we have several sets needed by various drivers in our config. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] sk98lin: MII ioctl supportStephen Hemminger
Add MII ioctl support to the deprecated sk98lin driver. This allows comparison with skge driver's PHY settings. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] sk98lin: ethtool register dumpStephen Hemminger
Add support for dumping the registers in the deprecated sk98lin driver. This is allows for easier comparison with settings in new skge driver. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] pci_module_init() convertion in olympic.cHenrik Kretzschmar
pci_module_init() convertion in olympic.c Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] Remove unnecessary check in drivers/net/depca.cEric Sesterhenn
This was spotted by coverity (cid #793). All callers dereference dev before calling this functions, and we dereference it earlier in the function, when initializing lp. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] forcedeth: power management supportFrancois Romieu
Tobias Diedrich <ranma@tdiedrich.de> sayeth: Vanilla forcedeth doesn't seem to support suspend and an ifdown/up-cycle is needed to get it working again after suspend. Francois Romieu's "Awfully experimental" patch is working just fine for me (with message signalled interrupts disabled) and has survived quite a few suspend/resume cycles. So I'd very much like to see (at least partial, with msi disabled) suspend support for forcedeth in mainline. (Addresses http://bugzilla.kernel.org/show_bug.cgi?id=6398) Cc: Francois Romieu <romieu@fr.zoreil.com> Cc; Jeff Garzik <jeff@garzik.org> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] 2.6.18: sb1250-mac: Phylib IRQ handling fixesMaciej W. Rozycki
This patch fixes a couple of problems discovered with interrupt handling in the phylib core, namely: 1. The driver uses timer and workqueue calls, but does not include <linux/timer.h> nor <linux/workqueue.h>. 2. The driver uses schedule_work() for handling interrupts, but does not make sure any pending work scheduled thus has been completed before driver's structures get freed from memory. This is especially important as interrupts may keep arriving if the line is shared with another PHY. The solution is to ignore phy_interrupt() calls if the reported device has already been halted and calling flush_scheduled_work() from phy_stop_interrupts() (but guarded with current_is_keventd() in case the function has been called through keventd from the MAC device's close call to avoid a deadlock on the netlink lock). Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> patch-mips-2.6.18-20060920-phy-irq-16 Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] 2.6.18: sb1250-mac: Broadcom PHY supportMaciej W. Rozycki
This patch adds support for interrupt-driven operation of the Broadcom Gigabit Ethernet PHYs. I have included device IDs for the parts used on Broadcom SiByte evaluation boards; more can be added as a need arises. They are apparently generally software-compatible with one another. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> patch-mips-2.6.18-20060920-broadcom-phy-15 Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-01Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [PATCH] Fix an offset error when reading the CS89x0 ADD_PORT register [PATCH] spidernet: poor network performance [PATCH] Spidernet: remove ETH_ZLEN check in earlier patch [PATCH] bonding: fix an oops when slave device does not provide get_stats [PATCH] drivers/net: SAA9730: Fix build error Revert "[PATCH] zd1211rw: Removed unneeded packed attributes" [PATCH] zd1211rw: Fix of a locking bug [PATCH] softmac: remove netif_tx_disable when scanning [PATCH] ieee80211: Fix kernel panic when QoS is enabled
2006-12-01Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (103 commits) usbcore: remove unused argument in autosuspend USB: keep count of unsuspended children USB hub: simplify remote-wakeup handling USB: struct usb_device: change flag to bitflag OHCI: make autostop conditional on CONFIG_PM USB: Add autosuspend support to the hub driver EHCI: Fix root-hub and port suspend/resume problems USB: create a new thread for every USB device found during the probe sequence USB: add driver for the USB debug devices USB: added dynamic major number for USB endpoints USB: pegasus error path not resetting task's state USB: endianness fix for asix.c USB: build the appledisplay driver USB serial: replace kmalloc+memset with kzalloc USB: hid-core: canonical defines for Apple USB device IDs USB: idmouse cleanup USB: make drivers/usb/core/driver.c:usb_device_match() static USB: lh7a40x_udc remove double declaration USB: pxa2xx_udc recognizes ixp425 rev b0 chip usbtouchscreen: add support for DMC TSC-10/25 devices ...
2006-12-01Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (36 commits) Driver core: show drivers in /sys/module/ Documentation/driver-model/platform.txt update/rewrite Driver core: platform_driver_probe(), can save codespace driver core: Use klist_remove() in device_move() driver core: Introduce device_move(): move a device to a new parent. Driver core: make drivers/base/core.c:setup_parent() static driver core: Introduce device_find_child(). sysfs: sysfs_write_file() writes zero terminated data cpu topology: consider sysfs_create_group return value Driver core: Call platform_notify_remove later ACPI: Change ACPI to use dev_archdata instead of firmware_data Driver core: add dev_archdata to struct device Driver core: convert sound core to use struct device Driver core: change mem class_devices to be real devices Driver core: convert fb code to use struct device Driver core: convert firmware code to use struct device Driver core: convert mmc code to use struct device Driver core: convert ppdev code to use struct device Driver core: convert PPP code to use struct device Driver core: convert cpuid code to use struct device ...
2006-12-01Driver core: convert PPP code to use struct deviceGreg Kroah-Hartman
Converts from using struct "class_device" to "struct device" making everything show up properly in /sys/devices/ with symlinks from the /sys/class directory. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01usb: zd1201 free urb cleanupMariusz Kozlowski
- usb_free_urb() cleanup Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01usb: irda-usb free urb cleanupMariusz Kozlowski
- usb_free_urb() cleanup Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-30[PATCH] Fix an offset error when reading the CS89x0 ADD_PORT registerGeorge G. Davis
Fix an offset error when reading the CS89x0 ADD_PORT register. Signed-off-by: George G. Davis Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-30[PATCH] spidernet: poor network performanceLinas Vepstas
Correct a problem seen on later kernels running the NetPIPE application. Specifically, NetPIPE would begin running very slowly at the 1533 packet size. It was determined that Spidernet slowed with an idle DMA engine. Signed-off-by: James K Lewis <jklewis@us.ibm.com> Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-30[PATCH] Spidernet: remove ETH_ZLEN check in earlier patchJames K Lewis
In an earlier patch, code was added to pad packets that were less that ETH_ZLEN (60) bytes using the skb_pad function. This has caused hangs when accessing certain NFS mounted file systems. This patch removes the check and solves the NFS problem. The driver, with this patch, has been tested extensively. Please apply. Signed-off-by: James K Lewis <jklewis@us.ibm.com> Cc: Stephen Hemminger <shemminger@osdl.org> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-30[PATCH] bonding: fix an oops when slave device does not provide get_statsLaurent Riffard
Bonding driver unconditionnaly dereference get_stats function pointer for each of its slave device. This patch - adds a check for NULL dev->get_stats pointer in bond_get_stats - prints a notice when the bonding device enslave a device without get_stats function. Signed-off-by: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-30Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2006-11-30[PATCH] drivers/net: SAA9730: Fix build errorRalf Baechle
Confusingly NET_PCI is also set for for non-PCI EISA configurations where building this driver will result in a build error due to a reference to pci_release_regions. While at it, remove the EXPERIMENTAL - in all its uglyness and despite the sincerest attempts of the buggy hardware the driver is known to work. Also limit the driver to the Atlas board - the only known system to ever use the SAA9730 before Phillips ended the short live of the SAA9730. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-30Fix misc .c/.h comment typosMatt LaPlante
Fix various .c/.h typos in comments (no code changes). Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 04:16:25 +0000