aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2006-08-03[PATCH] myri10ge - Fix spurious invokations of the watchdog reset handlerBrice Goglin
Fix spurious invocations of the watchdog reset handler. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-03[PATCH] myri10ge - Write the firmware in 256-bytes chunksBrice Goglin
When writing the firmware to the NIC, the FIFO is 256-bytes long, so we use 256-bytes chunks and a read to wait until the previous write is done. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-03[PATCH] Stop calling phy_stop_interrupts() twiceSergei Shtylylov
Prevent phylib from freeing PHY IRQ twice on closing an eth device: phy_disconnect() first calls phy_stop_interrupts(), then it calls phy_stop_machine() which in turn calls phy_stop_interrupts() making the kernel complain on each bootup... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-03[PATCH] s2io driver bug fixes #2Ananda Raju
This patch contains some of the bug fixes and enhancements done to s2io driver. Following are the brief description of changes 1. code cleanup to handle gso modification better 2. Move repeated code in rx path, to a common function s2io_chk_rx_buffers() 3. Bug fix in MSI interrupt 4. clear statistics when card is down 5. Avoid linked list traversing in lro aggregation. 6. Use pci_dma_sync_single_for_cpu for buffer0 in case of 2/3 buffer mode. 7. ethtool tso get/set functions to set clear NETIF_F_TSO6 8. Stop LRO aggregation when we receive ECN notification Signed-off-by: Ananda Raju <ananda.raju@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-03[PATCH] s2io driver bug fixes #1Ananda Raju
This patch contains some of the bug fixes and enhancements done to s2io driver. Following are the brief description of changes 1. Introduced macro "S2IO_PARM_INT" for declaring integer load parameter 2. UDP_RR test failure, memset txdl after Tx completion 3. PXE boot may leave adapter in unknown state so do reset in probe. 4. Add Tx completion code in netpoll 5. In s2io_vpd_read() move array vpd_data[] to pointer, saves stack memory 6. Fix bug in ethtool online test Signed-off-by: Ananda Raju <ananda.raju@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-03Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2006-08-02[E1000]: Convert to netdev_alloc_skbDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-02[TG3]: Convert to netdev_alloc_skbDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-02[ATALK]: Make CONFIG_DEV_APPLETALK a tristate.David S. Miller
Otherwise we allow building appletalk drivers in-kernel when CONFIG_ATALK is modular. That doesn't work because these drivers use symbols such as "alloc_talkdev" which is exported from code built by CONFIG_ATALK. Noticed by Toralf Förster. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-02[PATCH] zd1211rw: Packet filter fix for managed (STA) modeUlrich Kunitz
I had problems with my AVM Fritz!Box access point. It appeared that the AP deauthorized me and the softmac didn't reconnect me. This patch handles the problem. Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-02[PATCH] zd1211rw: Fixed endianess issue with length info tag detectionUlrich Kunitz
Discovered a problem while accessing www.python.org on my PPC32. The problem was pretty consistent for all sticks. The reason was that while testing for the length info tag, I ignored the endianess of the host system. Please recognize that converting the constant to little endian, we create faster code. Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-02[PATCH] zd1211rw: Remove bogus assertDaniel Drake
This function is never called in interrupt context, and it doesn't matter if it is called in IRQ context or not. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-02[PATCH] zd1211rw: Fix software encryption/decryptionDaniel Drake
Apparently the ZD1211 doesn't mind, but the ZD1211B absolutely must be told that encryption is happening in software. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-02[PATCH] zd1211rw: Pass more management frame types up to hostDaniel Drake
We'll be needing these at some point... Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-02[PATCH] zd1211rw: Fixes radiotap headerUlrich Kunitz
There has been a problem in the radiotap header. Monitor mode works now with tcpdump 3.94 + libpcap 0.9.4. ethereal 0.99.0 + libpcap 0.9.4 is broken, because it doesn't find the right offset for the IEEE 802.11 header. Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-29Merge branch 'upstream' of ↵Jeff Garzik
git://electric-eye.fr.zoreil.com/home/romieu/linux-2.6 into upstream-fixes
2006-07-29[PATCH] skge: chip clock rate typoStephen Hemminger
Okay, Fix both typo's in one patch .The impact is that the incorrect value was being computed for blinking LED and interrupt moderation values. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-29[PATCH] myri10ge - Always do a dummy RDMA after loading the firmwareBrice Goglin
Always do a dummy RDMA after loading the firmware to work around buggy PCIe chipsets which do not implement resending properly. This is so cheap as to be almost free, and should never have been conditional on the tx boundary != 4096. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-29Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2006-07-28[SUNLANCE]: fix compilation on sparc-UPAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-27[PATCH] orinoco: fix setting transmit key onlyDan Williams
When determining whether there's a key to set or not, orinoco should be looking at the key length, not the key data. Otherwise confusion reigns when trying to set TX key only, passing in zero-length key, but non-NULL pointer. Key length takes precedence over non-NULL key data. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-27[PATCH] softmac: do shared key auth in workqueueDaniel Drake
Johann Uhrmann reported a bcm43xx crash and Michael Buesch tracked it down to a problem with the new shared key auth code (recursive calls into the driver) This patch (effectively Michael's patch with a couple of small modifications) solves the problem by sending the authentication challenge response frame from a workqueue entry. I also removed a lone \n from the bcm43xx messages relating to authentication mode - this small change was previously discussed but not patched in. Signed-off-by: Daniel Drake <dsd@gentoo.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-27[PATCH] airo: should select crypto_aesRobert Schulze
The driver airo (for Cisco Wlan-Cards) complains about "failed to load transform for AES", when it is loaded and CRYPTO_AES is not selected in Kconfig. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-27[PATCH] zd1201: workaround interference problemPavel Machek
zd1201 has nasty tendency to emit magicall anti-wifi cloud when it is inserted into slot, but not used. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-25[TG3]: Update version and reldateMichael Chan
Update version to 3.63. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-25[TG3]: Handle tg3_init_rings() failuresMichael Chan
Handle dev_alloc_skb() failures when initializing the RX rings. Without proper handling, the driver will crash when using a partial ring. Thanks to Stephane Doyon <sdoyon@max-t.com> for reporting the bug and providing the initial patch. Howie Xu <howie@vmware.com> also reported the same issue. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-25[TG3]: Add tg3_restart_hw()Michael Chan
Add tg3_restart_hw() to handle failures when re-initializing the device. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-21[DUMMY]: Avoid an oops when dummy_init_one() failedNicolas Dichtel
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-21[IFB] After ifb_init_one() failed, i is increased. DecreaseNicolas Dichtel
It before entering in the loop for freeing the other ifb devices. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-21[NET]: sun happymeal, little pci cleanupJiri Slaby
Use pci_register_driver instead of pci_module_init. Use PCI_DEVICE macro. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-21[WAN]: Cosmetic changes to N2 and C101 driversKrzysztof Halasa
WAN: Cosmetic changes to N2 and C101 drivers Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-21[WAN]: Added missing netif_dormant_off() to generic HDLCKrzysztof Halasa
WAN: Fixed a problem with PPP/raw HDLC/X.25 protocols not doing netif_dormant_off() at startup. Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-20via-velocity: fix speed and link status reported by ethtoolJay Cliburn
The via-velocity driver reports incorrect speed and link detected status as viewed by ethtool (and probably other tools). This patch fixes those incorrect reports and prettifies a long line. Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-07-17[PATCH] spidernet: rework tx queue handlingJens Osterkamp
With this patch TX queue descriptors are not chained per default any more. The pointer to next descriptor is set only when next descriptor is prepaired for transfer. Also the mechanism of checking wether Spider is ready has been changed: it checks not for CARDOWNED flag in status of previous descriptor but for a TXDMAENABLED flag in Spider's register. Signed-off-by: Maxim Shchetynin <maxim@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Jens Osterkamp <Jens.Osterkamp@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-17[PATCH] spidernet: bug fix for init codeJens Osterkamp
We want to intitialize addr instead of data register first. Signed-off-by: Jens Osterkamp <Jens.Osterkamp@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-17[PATCH] sky2: NAPI poll fixStephen Hemminger
When sky2 driver gets lots of received packets at once, it can get stuck. The NAPI poll routine gets called back to keep going, but since no IRQ bits are set it doesn't make progress. Increase version, since this is serious enough problem that I want to be able to tell new from old problems. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-17Merge branch 'upstream-fixes-jgarzik' of ↵Jeff Garzik
git://lost.foo-projects.org/~ahkok/git/netdev-2.6 into upstream-fixes
2006-07-14e1000: bump version to 7.1.9-k4Auke Kok
Bump the version to 7.1.9-k4 to indicate three extra changes. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-07-14e1000: fix panic on large frame receive when mtu=defaultAuke Kok
A panic was reported when receiving 1522 size packets if using the default MTU. we should set the initial rx buffer length to the value that e1000changemtu sets so that we can receive any packet that would not be dropped by LPE=0. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke.jan.h.kok@intel.com>
2006-07-14e1000: remove CRC bytes from measured packet lengthAuke Kok
After removing the hardware CRC stripping which causes problems with SOL and related issues, we need to compensate for this changed size. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-07-14e1000: Redo netpoll fix to address community concernsAuke Kok
The original suggested fix for netpoll was found to be racy on SMP kernels. While it is highly unlikely that this race would ever be seen in the real world due to current netpoll usage models, we implemented this updated fix to address concerns. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-07-12Merge commit master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 of HEADLinus Torvalds
* HEAD: [NET]: fix __sk_stream_mem_reclaim [Bluetooth] Fix deadlock in the L2CAP layer [Bluetooth] Let BT_HIDP depend on INPUT [Bluetooth] Avoid NULL pointer dereference with tty->driver [Bluetooth] Remaining transitions to use kzalloc() [WAN]: converting generic HDLC to use netif_dormant*() [IPV4]: Fix error handling for fib_insert_node call [NETROM] lockdep: fix false positive [ROSE] lockdep: fix false positive [AX.25]: Optimize AX.25 socket list lock [IPCOMP]: Fix truesize after decompression [IPV6]: Use ipv6_addr_src_scope for link address sorting. [TCP] tcp_highspeed: Fix AI updates. [MAINTAINERS]: Add proper entry for TC classifier [NETROM]: Drop lock before calling nr_destroy_socket [NETROM]: Fix locking order when establishing a NETROM circuit. [AX.25]: Fix locking of ax25 protocol function list. [IPV6]: order addresses by scope
2006-07-12[PATCH] sky2: optimize receive restartStephen Hemminger
When the driver handles multiple packets per NAPI poll, it is better to reload the receive ring, then tell the hardware. Otherwise, under packet storm with flow control, the driver/hardware will degrade down to one packet getting through per pause-exchange. Likewise on transmit, don't wakeup until a little more than minimum ring space is available. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-12[PATCH] sky2: PHY power on delaysStephen Hemminger
The documentation says we need to wait after turning on the PHY. Also, don't enable WOL by default. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-12[PATCH] sky2: NAPI suspend/resume of dual port cardsStephen Hemminger
The changes to handle suspend/resume didn't handle the case where a dual port card has the first port down, but the second is running. In this driver, all NAPI polling is done on the primary port. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-12[PATCH] sky2: sky2_reset section mismatchStephen Hemminger
Since sky2_reset gets call from sky2_resume it shouldn't be tagged with devinit. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-12[PATCH] sk98lin: fix truncated collision threshold maskStephen Hemminger
Patch to correct broken collision threshold mask in (same problem as sky2 driver). Should be three bits wide, but the mask only allows for 1 bit to be set. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-12[PATCH] skge: fix truncated collision threshold maskStephen Hemminger
Patch to correct broken collision threshold mask in (same problem as sky2 driver). Should be three bits wide, but the mask only allows for 1 bit to be set. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-12[PATCH] sky2: fix truncated collision threshold maskStephen Hemminger
Patch to correct broken collision threshold mask in sky2 driver. Should be three bits wide, but the mask only allows for 1 bit to be set. Thanks & Regards Neil Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Stephen Hemminger <shemminger@osdl.org> sky2.h | 2 +- 1 files changed, 1 insertion(+), 1 deletion(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-12[PATCH] myri10ge return value fixBrice Goglin
Andrew Morton wrote: > All these functions return error codes, and we're not checking them. We > should. So there's a patch which marks all these things as __must_check, > which causes around 1,500 new warnings. > The following patch fixes such a warning in myri10ge. Check pci_enable_device() return value in myri10ge_resume(). Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-24 01:27:11 +0000