aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2007-05-24Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: forcedeth: fix cpu irq mask chelsio parenthesis fix spidernet: skb used after netif_receive_skb meth driver renovation remove unnecessary dependency on VIA velocity config fix compiler warning in fixed.c asix.c - Add Belkin F5D5055 ids ucc_geth:trivial fix ucc_geth: Fix MODULE_DEVICE_TABLE() duplication [PATCH] drivers/net/wireless/libertas/rx.c: fix use-after-free [PATCH] drivers/net/wireless/libertas/fw.c: fix use-before-check [PATCH] libertas: skb dereferenced after netif_rx
2007-05-24forcedeth: fix cpu irq maskAyaz Abdulla
This patch fixes the cpu irq mask define to include the timer irq. Another flag check was setting up the timer bit in all cases so we didn't notice the issue. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-24chelsio parenthesis fixMariusz Kozlowski
Hello, Balanance parenthesis in chelsio header file. Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> drivers/net/chelsio/suni1x10gexp_regs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-24spidernet: skb used after netif_receive_skbFlorin Malita
The stats update code in spider_net_pass_skb_up() is touching the skb after it's been passed up to the stack. To avoid that, just update the stats first. Signed-off-by: Florin Malita <fmalita@gmail.com> Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-24meth driver renovationRalf Baechle
The meth ethernet driver for the SGI IP32 aka O2 is so far still an old style driver which does not use the device driver model. This is now causing issues with some udev based gadgetry in debian-stable. Fixed by converting the meth driver to a platform device. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> -- Fixes since previous patch: o Fixed typo in meth_exit_module() Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-24remove unnecessary dependency on VIA velocity configYoichi Yuasa
Hi, This patch has removed unnecessary dependency on VIA velocity config. Yoichi Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-24fix compiler warning in fixed.cDenver Gingerich
Correct the following compiler warning (and warnings resulting from the correction): warning: 'fixed_mdio_register_device' defined but not used Signed-off-by: Denver Gingerich <denver@ossguy.com> Cc: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-24asix.c - Add Belkin F5D5055 idsDavid Hollis
(Originally sent to linux-usb-devel) The attached patch adds the device IDs for the Belkin F5D5055 device. Reported by Andy Juniper <ajuniper@freeuk.com> Signed-off-by: David Hollis <dhollis@davehollis.com> -- David Hollis <dhollis@davehollis.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-24ucc_geth:trivial fixLi Yang
Remove redundant includes. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-24ucc_geth: Fix MODULE_DEVICE_TABLE() duplicationLi Yang
Fix MODULE_DEVICE_TABLE() duplication in ucc_geth.c and ucc_geth_mii.c for ucc_geth to be compiled as module. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-24Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2007-05-22USB: address FIXME in usbnet w.r.t drivers claiming multiple interfacesOliver Neukum
This fixes the issue of drivers claiming multiple interfaces. Operations are stopped as soon as an interface is suspend and resumed only as all interfaces have been resumed. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: handle more rndis_host odditiesDavid Brownell
Workaround another device firmware bug, wherein CDC descriptors get placed in a wrong place never previously observed in the wild. Fix a bug where a seeming RNDIS device returns a bogus response during device initialization. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22[PATCH] drivers/net/wireless/libertas/rx.c: fix use-after-freeEugene Teo
skb could have been freed by then. Also, in libertas_upload_rx_packet(), skb->protocol is initialized by eth_type_trans(). Signed-off-by: Eugene Teo <eugeneteo@kernel.sg> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-05-22[PATCH] drivers/net/wireless/libertas/fw.c: fix use-before-checkEugene Teo
NULL checks should be performed before the dereference. Spotted by the Coverity checker. Signed-off-by: Eugene Teo <eteo@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-05-22[PATCH] libertas: skb dereferenced after netif_rxFlorin Malita
In libertas_process_rxed_packet() and process_rxed_802_11_packet() the skb is dereferenced after being passed to netif_rx (called from libertas_upload_rx_packet). Spotted by Coverity (1658, 1659). Also, libertas_upload_rx_packet() unconditionally returns 0 so the error check is dead code - might as well take it out and change the signature. Signed-off-by: Florin Malita <fmalita@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-05-21declance: Remove a dangling spin_unlock_irq() thingyMaciej W. Rozycki
The spin_unlock_irq() invocation in lance_start_xmit() has no matching locking request. The call is already protected by netif_tx_lock, so remove the statement. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-21e1000: Don't enable polling in open() (was: e1000: assertion hit in ↵Auke Kok
e1000_clean(), kernel 2.6.21.1) Herbert Xu wrote: "netif_poll_enable can only be called if you've previously called netif_poll_disable. Otherwise a poll might already be in action and you may get a crash like this." Removing the call to netif_poll_enable in e1000_open should fix this issue, the only other call to netif_poll_enable is in e1000_up() which is only reached after a device reset or resume. Bugzilla: http://bugzilla.kernel.org/show_bug.cgi?id=8455 https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=240339 Tested by Doug Chapman <doug.chapman@hp.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-19mlx4_core: Fix array overrun in dump_dev_cap_flags()Roland Dreier
Don't overrun fname[] array when decoding device flags. This was spotted by the Coverity checker (CID 1642). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-17e1000: Fix msi enable leak on error, don't print error message, cleanupAuke Kok
pci_enable_msi failure is a normal event so we should not print any error. Going over the code I spotted a missing pci_disable_msi() leak when irq allocation fails. The whole code also needed a cleanup, so I combined the two different calls to pci_request_irq into a single call making this look a lot better. All #ifdef CONFIG_PCI_MSI's have been removed. Compile tested with both CONFIG_PCI_MSI enabled and disabled. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-17ixgb: don't print error if pci_enable_msi() fails, cleanup minor leakAuke Kok
pci_enable_msi calls can fail for normal operational reasons. Driver should not print an error message in that case. Fix a leak that leaves msi enabled if pci_request_irq fails. We can remove CONFIG_PCI_MSI ifdefs alltogether Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-17NetXen: Fix NetXen driver ping on system-pMithlesh Thukral
NetXen: Fix for driver on System-p This patch will fix a ping issue on system-p Signed-off by: Milan Bag <mbag@netxen.com> Signed-off by: Adhiraj Joshi <adhiraj@netxen.com> Signed-by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-17spidernet: node-aware skbuff allocationChristoph Hellwig
Spidernet was the driver I original did all the node-aware netdevice allocation for, but after a year it still hasn't hit mainline. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-17gianfar: Add I/O barriers when touching buffer descriptor ownership.Scott Wood
The hardware must not see that is given ownership of a buffer until it is completely written, and when the driver receives ownership of a buffer, it must ensure that any other reads to the buffer reflect its final state. Thus, I/O barriers are added where required. Without this patch, I have observed GCC reordering the setting of bdp->length and bdp->status in gfar_new_skb. Hardware reordering was also theoretically possible. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-17ibm_emac: fix link speed detection changeEugene Surovegin
Fix link speed detection change. Thanks to Stefan Roese <sr@denx.de> for finding this bug. CC: Stefan Roese <sr@denx.de> Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-17ibm_emac: improved PHY supportEugene Surovegin
Original patch is from Jeff Haran <jharan@brocade.com> with my minor style fixes. His comments follow: The first problem was in the function that configures the PHY for autonegotiation, genmii_setup_aneg(). The original code does a read/modify/write of the autonegotiation advertizement register (reg 4), followed by a read/modify/write of the control register (reg 0). While the original code follows the proper procedure as per reading the IEEE specs, what I found is that on at least one PHY model (National DP83843) the read of the control register comes back with the soft reset bit set (bit 15). Because of the read/modify/write operation, this causes the write to write a 1 back to the reset bit, which initiates a software reset of the PHY. This software reset causes the PHY to return to its power up state which advertizes all modes of operation, thus negating the write to the autoneg advertizement register. The modification is to spin reading the control register until the soft reset bit is clear before doing the modify/write. The second problem was in the function that configures the PHY for forced operation, genmii_setup_forced(). The original code initiates a software reset operation via a write of a 1 to bit 15 of the control register (reg 0), but then proceeds to do a second write to that same register without waiting until that reset bit is cleared by the PHY itself (which according to the IEEE specs indicates that the PHY reset is complete). This is a violation of how one is supposed to use this software reset feature of these PHYs and I believe was the cause of mysterious, difficult to reproduce link failures that we've observed on some of our systems that use this driver. The fix is to modify the function so that it spins waiting for the reset bit to clear after doing the soft reset and before doing the subsequent write. Signed-off-by: Jeff Haran <jharan@brocade.com> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-17ibm_emac: fix section mismatch warningsEugene Surovegin
Fix "Section mismatch" warnings Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-17sky2: memory barriers changeStephen Hemminger
Do some memory barrier changes for safety/perfomance: Don't need read after update to index, mmiowb() followed by read at end of irq is sufficient. Signed-off-by: Stephn Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-17sky2: remove dual port workaroundStephen Hemminger
This workaround was added to deal with NAPI core and how it affected dual port shared polling. It turned out not to be necessary. Stopping device 0 only doesn't stop NAPI from working completely after that. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-17sky2: MIB counter overflow handlingStephen Hemminger
Make sure that if we ever get a MIB counter overflow interrupt (normally masked off), that the IRQ is cleared. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-17sky2: keep track of receive alloc failuresStephen Hemminger
When driver can't allocate receive buffer it drops incoming packet. Keep a counter. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-17sky2: PHY register settingsStephen Hemminger
Align the PHY setup of the sky2 driver with the vendor sk98lin (10.0.4.3) driver. The PHY register settings are mostly black magic, even with access to the documentation it isn't clear what the right values are. The changes are mostly comments, the code change only affects the Yukon FE (100 mbit only) version. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-17sky2: remove Gigabyte 88e8056 restrictionStephen Hemminger
The problems with Gigabyte motherboards are system configuration dependent. Since it works fine for some users, it doesn't make sense to deprive them. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-15missing includes in mlx4Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Jeff Garzik <jeff@garzik.org> Acked-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-15ucc_geth: eliminate max-speed, change interface-type to phy-connection-typeKim Phillips
It was agreed that phy-connection-type was a better name for the interface-type property, so this patch renames it. Also, the max-speed property name was determined too generic, and is therefore eliminated in favour of phy-connection-type derivation logic. includes corrections to copyright text. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-15smc911x: fix compilation breakageVitaly Wool
Looks like the new version of this patch has been overlooked, so I'm resending it. It just adapts the driver to the new IRQ API according to what Russell has pointed out. drivers/net/smc911x.c | 6 ++---- 1 files changed, 2 insertions(+), 4 deletions(-) Signed-off-by: Vitaly Wool <vitalywool@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-15pasemi_mac: Fix local-mac-address parsingolof@lixom.net
Turns out we have an old version of firmware that stores the mac address in 'mac-address' as a string instead of a byte array. All versions that use local-mac-address should have it as byte array, so no need to do string parsing for that case. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-15pasemi_mac: Terminate PCI ID listolof@lixom.net
This caused some very interesting behaviour depending on what happened to be built at the same time. Add terminating empty entry to the list of IDs. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-15pasemi_mac: Interrupt ack fixesOlof Johansson
Interrupt ack fixes Fix the packet count resets at interrupt time, using the cacheable packet count status to set number of processed/received packets, since the ack count is the cumulative number of packets processed, and not incremental. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-15pasemi_mac: Fix register definesolof@lixom.net
Some shift values were obviously wrong. Fix them to correspond with the masks. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-15Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IPoIB/cm: Optimize stale connection detection IB/mthca: Set cleaned CQEs back to HW ownership when cleaning CQ IB/mthca: Fix posting >255 recv WRs for Tavor RDMA/cma: Add check to validate that cm_id is bound to a device RDMA/cma: Fix synchronization with device removal in cma_iw_handler RDMA/cma: Simplify device removal handling code IB/ehca: Disable scaling code by default, bump version number IB/ehca: Beautify sysfs attribute code and fix compiler warnings IB/ehca: Remove _irqsave, move #ifdef IB/ehca: Fix AQP0/1 QP number IB/ehca: Correctly set GRH mask bit in ehca_modify_qp() IB/ehca: Serialize hypervisor calls in ehca_register_mr() IB/ipath: Shadow the gpio_mask register IB/mlx4: Fix uninitialized spinlock for 32-bit archs mlx4_core: Remove unused doorbell_lock net: Trivial MLX4_DEBUG dependency fix.
2007-05-13mlx4_core: Remove unused doorbell_lockRoland Dreier
struct mlx4_priv.doorbell_lock is never used, so delete it. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-13net: Trivial MLX4_DEBUG dependency fix.Paul Mundt
CONFIG_MLX4_DEBUG works out to a def_bool y for those that have CONFIG_EMBEDDED set. Make it depend on MLX4_CORE. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-12Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (30 commits) [ARM] Use new get_irqnr_preamble [ARM] Ensure machine class menu is sorted alphabetically [ARM] 4333/2: KS8695: Micrel Development board [ARM] 4332/2: KS8695: Serial driver [ARM] 4331/3: Support for Micrel/Kendin KS8695 processor [ARM] 4371/1: AT91: Support for Atmel AT91SAM9RL-EK development board [ARM] 4372/1: Define byte sizes in asm-arm/sizes.h [ARM] 4370/3: AT91: Support for Atmel AT91SAM9RL processors. [ARM] Update mach-types [ARM] export symbol csum_partial_copy_from_user [ARM] iop13xx: msi support [ARM] stacktrace fix [ARM] Spinlock initializer cleanup [ARM] remove useless config option GENERIC_BUST_SPINLOCK [ARM] 4303/3: base kernel support for TI DaVinci [ARM] 4369/1: AT91: Fix circular dependency in header files [ARM] 4368/1: S3C24xx: build fix [ARM] 4364/1: AT91: LEDS on AT91SAM9261-EK [ARM] Fix iop32x/iop33x build [ARM] EBSA110: fix build errors caused by missing "const" ...
2007-05-11Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (23 commits) [POWERPC] Add arch/powerpc support for the Motorola PrPMC2800 [POWERPC] Add bootwrapper support for Motorola PrPMC2800 platform [POWERPC] Add DTS file for the Motorola PrPMC2800 platform [POWERPC] Check cache coherency of kernel vs firmware [POWERPC] Add Marvell mv64x60 PCI bridge support [POWERPC] Create Marvell mv64x60 I2C platform_data [POWERPC] Create Marvell mv64x60 ethernet platform_data [POWERPC] Create Marvell mv64x60 MPSC (serial) platform_data [POWERPC] Add interrupt support for Marvell mv64x60 chips [POWERPC] Add bootwrapper support for Marvell/mv64x60 I2C [POWERPC] Add bootwrapper support for Marvell MPSC [POWERPC] Add bootwrapper support for Marvell/mv64x60 hostbridge [POWERPC] Add Makefile rules to wrap dts file in zImage [POWERPC] Spelling fixes: arch/ppc/ [POWERPC] U-boot passes the initrd as start/end, not start/size. [POWERPC] PS3: Update ps3_defconfig [POWERPC] PS3: Fix request_irq warning [POWERPC] Don't complain if size-cells == 0 in prom_parse() [POWERPC] Simplify smp_space_timers [POWERPC] Trivial ps3 warning fixes ...
2007-05-12[POWERPC] Create Marvell mv64x60 ethernet platform_dataDale Farnsworth
This patch creates platform_device entries for the Marvell mv64x60 ethernet controller ports, based on information contained in the device tree. This driver (like the other mv64x60 drivers) are unusual in that it works on both the MIPS and PowerPC architectures. Because of that, the drivers do not support the normal PowerPC of_platform_bus_type. They support platform_bus_type instead. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-11Merge branch 'libertas' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream
2007-05-11Add support for the Davicom DM9161A PHYKim Phillips
Distinguish between the Davicom DM9161A PHY and the DM9161E. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-11sky2: only disable 88e8056 on some boardsStephen Hemminger
Use DMI to add a blacklist of broken boards (so far only one). Hopefully, the problems will be solved later, and the the whole blacklist can disappear. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-11sky2: 88e8071 support not readyStephen Hemminger
The driver is not ready to support 88e8071 chip. If this chip is present, system will hang on boot. So remove it from PCI device id's for now. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 07:06:27 +0000