aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2009-04-22iwlwifi: rename PROBE_OPTION_MAX_API1 to PROBE_OPTION_MAX_3945Johannes Berg
This limit applies to current (APIv1 and APIv2) 3945 firmware only, not supported firmware of any of the other cards. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ar9170: rework rxstream codeChristian Lamparter
With this patch ar9170 is capable of receiving aggregated 802.11n frames and sniffing on most networks without having a "debug message overhead". (Includes phy initialization requested by Johannes Berg <johannes@sipsolutions.net> -- JWL) Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ar9170: support HT receive and channel configJohannes Berg
This patch adds support for configuring HT40 channels and receiving HT40 to ar9170. Receiving aggregation doesn't seem to work right now, so it's not enabled. Same goes for TX aggregation, but that probably needs even more work. With this, I can receive roughly 33 Mbits/sec. The HT capabilities are a little odd, I tried following otus here -- in particular having SGI_40 but not SGI_20 is a little weird but afaict that's what otus does. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22rndis_wlan: remove nickname supportJohannes Berg
Supporting wireless extension nickname is pointless and no other modern driver supports this, so remove it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22cfg80211: clean up includesJohannes Berg
Trying to separate header files into net/wireless.h and net/cfg80211.h has been a source of confusion. Remove net/wireless.h (because there also is the linux/wireless.h) and subsume everything into net/cfg80211.h -- except the definitions for regulatory structures which get moved to a new header net/regulatory.h. The "new" net/cfg80211.h is now divided into sections. There are no real changes in this patch but code shuffling and some very minor documentation fixes. I have also, to make things reflect reality, put in a copyright line for Luis to net/regulatory.h since that is probably exclusively written by him but was formerly in a file that only had my copyright line. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54: fix ps-poll delivery in ap modeChristian Lamparter
PS-Polled frames must be sent with OUT_NOCANCEL flag set, or the firmware will reject all of them, at the station is still blacklisted. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22rtl8187: Implement TX/RX blink for LEDLarry Finger
The following patch implements some control over the LED on RTL8187B and RTL8187L devices. Triggers are registered for TX and RX. Whenever the trigger event occurs, the LED is turned off for 1/20 second, then turned back on. Note: For those RTL8187X devices that are built into the computer and have a LED that is expected to be controlled with a radio switch, this patch will not operate that LED. That will take a separate patch to be prepared later. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Tested-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22Add support for CF8381 WiFi card.Marek Vasut
A detection function was added for identifying CF8381. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54: deactivate broken powersave function (part 2)Christian Lamparter
This patch deactivates powersave in station mode. It does not work correctly yet, so the code does more harm than good. (I split the original patch and sent part of it for 2.6.30, which didn't have the IEEE80211_HW_BEACON_FILTER flag. -- JWL) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22atheros: fix propagation of bad EEPROM on regulatory initLuis R. Rodriguez
When the EEPROM is not in good condition we cannot continue so we currently bail out but only ath5k is bailing out properly. Both ath9k and ar9170 were proceeding and if a user were to run into this they'd see an obscure panic. Lets propagate the error as intended and make sure we inform the user by lifting the error message from debug to a kernel error. Stable note: You can find a port of this page here: http://bombadil.infradead.org/~mcgrof/patches/ath9k/ath9k-fix-eeprom.patch.txt Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath5k: manipulate rxlink and descriptor address under rxbuf lockBob Copeland
Grabbing an ath5k_buf then dropping the lock is racy because the referenced descriptor can be obtained in another thread and released before the buffer is handed to the hardware. Likewise, manipulating sc->rxlink without the lock can lead to having multiple self-linked hardware descriptors. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath5k: use rx hw descriptor pointer for self-linked checkBob Copeland
This patch simplifies the code used to detect when the self-linked DMA buffer is still in use by hardware, by checking the hardware's rxdp register instead of looking at the software buffer list. Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath5k: use bool for modparamsBob Copeland
Current code uses int types, but both modparams are boolean values. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath5k: use tasklet_hi_schedule for beacon queueBob Copeland
For embedded platforms, beacon transmission can be starved when flooded with data packets. Prioritize beacons by giving the beacon queue the first shot when the isr completes. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath5k: fix initvals errorsBob Copeland
This patch corrects a few errors in the initvals tables to match those in the HAL tables. Namely, remove a couple of repetitions, fix some turbo mode errors, and correct a register for the CCK rate power table. Changes-licensed-under: ISC Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54: remove module_ stubsChristian Lamparter
Christoph Hellwig pointed out that these stubs are unnecessary. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath9k: Disable autosleep feature for AR9285 based chipsets.Vivek Natarajan
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath: add module informationChristian Lamparter
This patch adds licensing, author information and a description to the module. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22rtl8187: Remove the "8187B chip detected" message when probing RTL8187B cardsGábor Stefanik
This message appears to be nothing more than a leftover of the experimental-8187B era. Also, we print the HW type in the hwaddr line, making this message reduntant. And it's definitely not important enough to be a KERN_WARNING. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath9k: Remove CHANNEL_CW_INT handling in ath9k_hw_calibrateSujith
It is already handled properly in ath9k_hw_getnf. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath9k: Fix bug in calibration initializationSujith
This patch fixes a bug in ath9k_hw_init_cal() where the wrong calibration was being done for non-AR9285 chipsets. Also add a few helpful comments. Cc: stable@kernel.org Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath9k: Use a consistent naming conventionSujith
This patch replaces old 'hal_' prefixes with 'ath9k_'. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath9k: Cleanup calibration interfaceSujith
This patch cleans up the functions dealing with calibration, using proper return values. ath9k_hw_per_calibration(), ath9k_hw_calibrate now return bool values instead of setting error values in the function arguments. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath9k: Initialize ANI timersSujith
The various ANI timers have to be initialized properly when starting the calibration timer. Cc: stable@kernel.org Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath9k: Fix bug in determining calibration supportSujith
ADC gain calibration has to be done for all non 2GHZ-HT20 channels. Regression from "ath9k: use ieee80211_conf on ath9k_hw_iscal_supported()" Cc: stable@kernel.org Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath9k: Fix bug in checking HT flagSujith
The operating HT mode is stored in chanmode and not channelFlags. Cc: stable@kernel.org Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath9k: Remove unused channel flagsSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath9k: Fix bug in scan terminationSujith
A full HW reset needs to be done on termination of a scan run. Not setting SC_OP_FULL_RESET resulted in doing a fast channel change. Cc: stable@kernel.org Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath9k: Fix memleak on TX DMA failureSujith
The driver-specific region has to be freed in case of a DMA mapping failure. Cc: stable@kernel.org Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath9k: Handle ASPM properly for RFKILLSujith
Radio enable/disable have to handle ASPM state properly. This patch fixes it. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath9k: reset after PCI FATAL/PERR interruptsSteven Luo
ath9k_hw_getisr() doesn't appear to set anything in the status mask for PCI FATAL or PERR interrupts (AR_INTR_SYNC_HOST1_FATAL/PERR), which the open-source HAL seems to do. This means that the card isn't reset after these interrupts. This patch seems to fix a problem where the wireless drops out with an "ath9k: received PCI FATAL interrupt" in dmesg after some time; the hardware is an AR5416 in an ASUS WL-500W running 2.6.28.7 (OpenWRT) and compat-wireless 2009-03-31. Signed-off-by: Steven Luo <steven@steven676.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22b43legacy: Clean up beacon IRQLarry Finger
This patch ports commit c97a4ccc1fad35d3 "b43: Fix beacon BH update" to b43legacy. It fixes beacon updating in the bottomhalf. In case the device is busy, we will defer to later in the IRQ handler. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Michael Buesch <mb@bu3sch.de> Tested-by: David Ellingsworth <david@identd.dyndns.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22b43legacy: Fixes for beaconingLarry Finger
This patch ports the beaconing fixes from commit a82d992261f "b43: Beaconing fixes" to b43legacy. Basically it prevents the card from triggering the beacon IRQ over and over again. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Michael Buesch <mb@bu3sch.de> Tested-by: David Ellingsworth <david@identd.dyndns.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54: remove obsolet signal quality calculationChristian Lamparter
The signal quality percentage is now calculated by mac80211 stack. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54: utilize all available key slots for decryption offloadChristian Lamparter
This patch takes care of outstanding TODOs: /* TODO: some devices have 4 more free slots for rx keys */ Now the driver can utilize all available key slots instead of just 4. Obviously, this helps most in AP/IBSS(/MESH) mode, when we have to use more different keys. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22b43: Remove unnecessary MMIO in interrupt hotpathMichael Buesch
This removes unnecessary MMIO accesses in the interrupt hotpath. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22libertas: fix warning about %zd:John W. Linville
drivers/net/wireless/libertas/rx.c: In function ‘lbs_process_rxed_packet’: drivers/net/wireless/libertas/rx.c:184: warning: format ‘%zd’ expects type ‘signed size_t’, but argument 4 has type ‘__le32’ drivers/net/wireless/libertas/rx.c:184: warning: format ‘%zd’ expects type ‘signed size_t’, but argument 5 has type ‘unsigned int’ Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwlwifi: adding interrupt counter in debugfs for debuggingWey-Yi Guy
This patch adds interrupt statistics report to debugfs, this can help to understand number of interrupts happened which including HW/SW error for easier and better debugging. in /sys/kernel/debug/ieee80211/phyN/iwlagn/data directory use "cat interrupt" to view the current interrupt counter use "echo 0 > interrupt" to clear interrupt counter Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwlcore: fix channel display in debugfsMohamed Abbas
Fix displaying of wrong channel information when user query channel through debugfs Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwlwifi: check triple_stream_basic_rates in iwl_full_rxon_requiredDaniel C Halperin
For completeness, we should also make sure that the 3x3 MIMO rates are also checked when seeing if one rxon struct matches another. Signed-off-by: Daniel C Halperin <daniel.c.halperin@intel.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwlagn: Sync rxon active with changesMohamed Abbas
We need to sync rxon_active with changes after we commit rxon_assoc, without rxon_active will still have the old data that cause iwl_send_rxon_assoc to fail with no change in rxon command. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwlwifi: do not set dual_stream_ant_msk for 3 streamsDaniel C Halperin
This patch fixes a bug introduced by commit "iwlwifi: adding MIMO3 support in rate scaling". We should not set the dual_stream_ant_msk (for 2x2 MIMO) when using a 3x3 rate, this will cause a SYSASSERT in uCode. Note: there is no triple_stream_ant_msk, because all three antennas are used. Signed-off-by: Daniel C Halperin <daniel.c.halperin@intel.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwlwifi: Display decoded rate/mcs informationWey-Yi Guy
This patch adding MCS information in rate_scale_table, it help for debugging rate scaling algorithm, easy to understand what is the current rate scale table and matching modulation, plus the last mcs used for tx. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwl3945: use iwl_mac_reset_tsf from iwlwifiAbhijeet Kolekar
3945 can now use iwl_mac_reset_tsf from iwlwifi. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwl3945: use iwl_mac_get_tx_stats from iwlwifiAbhijeet Kolekar
3945 can now use iwl_mac_get_tx_stats from iwlwifi. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwl3945: use iwl_mac_config_interface from iwlwifiAbhijeet Kolekar
3945 can now use iwl_mac_config_interface from iwlwifi. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwlwifi: add config_ap lib opAbhijeet Kolekar
add config_ap lib op to iwlwifi and iwl3945 in preparation of future 3945 porting actions. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwl3945: use iwl_mac_config from iwlwifiAbhijeet Kolekar
3945 can now use iwl_mac_config from iwlwifi Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwl3945: use iwl_mac_remove_interface from iwlwifiAbhijeet Kolekar
3945 can now use iwl_mac_remove_interface from iwlwifi Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwl3945: use iwl_mac_add_interface from iwlwifiAbhijeet Kolekar
Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 18:57:48 +0000