aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2006-12-02[BNX2]: Remove udelay() in copper PHY code.Michael Chan
Change a long udelay() in bnx2_setup_copper_phy() to msleep(). Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[BNX2]: Add 5708S parallel detection.Michael Chan
Add code to parallel detect 1Gbps and 2.5Gbps link speeds. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[BNX2]: Add bnx2_5706_serdes_timer().Michael Chan
Separate the 5706S SerDes handling code in bnx2_timer() and put it in a new function. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[BNX2]: Improve SerDes handling.Michael Chan
1. Add support for 2.5Gbps forced speed setting. 2. Remove a long udelay() loop and change to msleep(). 3. Other misc. SerDes fixes. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[BNX2]: Fix Xen problem.Michael Chan
This fixes the problem of not receiving packets in the Xen bridging environment. The Xen script sets the device's MAC address to FE:FF:FF:FF:FF:FF and puts the device in promiscuous mode. The firmware had problem receiving all packets in this configuration. New firmware and setting the PROM_VLAN bit when in promiscuous mode will fix this problem. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[NET]: Conditionally use bh_lock_sock_nested in sk_receive_skbArnaldo Carvalho de Melo
Spotted by Ian McDonald, tentatively fixed by Gerrit Renker: http://www.mail-archive.com/dccp%40vger.kernel.org/msg00599.html Rewritten not to unroll sk_receive_skb, in the common case, i.e. no lock debugging, its optimized away. Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2006-12-02[NET]: Kill direct includes of asm/checksum.hAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02netpoll queue cleanupStephen Hemminger
The beast had a long and not very happy history. At one point, a friend (netdump) had asked that he open up a little. Well, the friend was long gone now, and the beast had this dangling piece hanging (netpoll_queue). It wasn't hard to stitch the netpoll_queue back in where it belonged and make everything tidy. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-12-02netpoll setup error handlingStephen Hemminger
The beast was not always healthy. When it was sick, it tended to be laconic and not tell anyone the real problem. A few small changes had it telling the world about its problems, if they really wanted to hear. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-12-02[NET]: The scheduled removal of the frame diverter.Adrian Bunk
This patch contains the scheduled removal of the frame diverter. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[netdrvr] skge: build fixJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] NetXen: driver cleanup, removed unnecessary __iomem type castsAmit S. Kale
Signed-off-by: Amit S. Kale <amitkale@netxen.com> netxen_nic.h | 38 ++++++++------------------------------ netxen_nic_ethtool.c | 5 ++--- netxen_nic_hw.c | 12 +++++------- netxen_nic_main.c | 8 +++----- 4 files changed, 18 insertions(+), 45 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] PHY: Add support for configuring the PHY connection interfaceAndy Fleming
Most PHYs connect to an ethernet controller over a GMII or MII interface. However, a growing number are connected over different interfaces, such as RGMII or SGMII. The ethernet driver will tell the PHY what type of connection it is by setting it manually, or passing it in through phy_connect (or phy_attach). Changes include: * Updates to documentation * Updates to PHY Lib consumers * Changes to PHY Lib to add interface support * Some minor changes to whitespace in phy.h * gianfar driver now detects interface and passes appropriate value to PHY Lib Signed-off-by: Andrew Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] chelesio: transmit locking (plus bug fix).Stephen Hemminger
If transmit lock is contended on, then push return code back and retry at higher level. Bugfix: If buffer is reallocated because of lack of headroom and the send is blocked, then drop packet. This is necessary because caller would end up requeuing a freed skb. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] chelsio: statistics improvementStephen Hemminger
Cleanup statistics management: * Get rid of duplicate or unused statistics * Convert high volume stats to per-cpu and 64 bit Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] chelsio: add MSI supportStephen Hemminger
Using MSI can avoid sharing IRQ and associated overhead. Tested on PCI-X. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] chelsio: use standard CRC routinesStephen Hemminger
Replace driver crc calculation with existing library. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] chelsio: cleanup pm3393 codeStephen Hemminger
Replace macro with function for updating RMON values Cleanups: * remove unused enum's * Fix comment format Signed-off-by: Stephen HEmminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] chelsio: add 1G swcixw aupportStephen Hemminger
Add support for 1G versions of Chelsio devices. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] chelsio: add support for other 10G boardsStephen Hemminger
Add support for other versions of the 10G Chelsio boards. This is basically a port of the vendor driver with the TOE features removed. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] chelsio: remove unused mutexStephen Hemminger
This mutex is unused in current (non TOE) code. Signed-off-by: Stephen Hemminger<shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] chelsio: use kzallocStephen Hemminger
Use kzalloc in several places. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] chelsio: whitespace fixesStephen Hemminger
Fix indentation and blank/tab issues. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] amd8111e use standard CRC libStephen Hemminger
I noticed this driver (and several others) reinvent their own copy of the existing CRC library. Don't have the hardware, but tested by extracting code and comparing result. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] sky2: msi enhancements.Stephen Hemminger
If using Message Signaled Interrupts (MSI) then the IRQ will never be shared. Don't call pci_disable_msi() unless using MSI. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] sky2: kfree_skb_any neededStephen Hemminger
It is possible for the sky2 driver NAPI poll routine to be called with IRQ's disabled if netpoll is trying to make space in the tx queue. This is an obscure path, but if it happens, the kfree_skb needs to happen via softirq. Calling kfree_skb with IRQ's disabled is a not allowed. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] sky2: fixes for Yukon EC_U chip revisionsStephen Hemminger
Update workarounds for 88E803X based on the latest SysKonnect vendor driver version (8.41). Tested on EC_U rev A1, only. These up the receive performance. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] sky2: add Dlink 560SX idStephen Hemminger
Add new PCI ID for DLink 560SX. This from the latest SysKonnect vendor driver (version 8.41). Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] sky2: receive error handling fixStephen Hemminger
If sky2 detects out of memory, or gets a bad frame, it reuses the same receive buffer, but forgets to poke the hardware. This could lead to the receiver getting stuck if there were lots of errors. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] skge: don't clear MC state on link downStephen Hemminger
I would rather fix Andy's problem by not clearing multicast information on link down. Also, add code to restore multicast state after ethtool phy reset. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02drivers/net/tulip/dmfe: support basic carrier detectionSamuel Thibault
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] netxen: uses PCIRandy Dunlap
drivers/built-in.o: In function `netxen_nic_remove': netxen_nic_main.c:(.text+0x31b4d): undefined reference to `pci_disable_msi' netxen_nic_main.c:(.text+0x31b8e): undefined reference to `pci_release_regions' drivers/built-in.o: In function `netxen_init_module': netxen_nic_main.c:(.init.text+0x3f17): undefined reference to `pci_module_init' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] chelsio: use kzallocStephen Hemminger
Use kzalloc() in chelsio driver. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] chelsio: use __netif_rx_schedule_prepStephen Hemminger
The chelsio driver can use __netif_rx_schedule_prep instead of it's own test_and_set inline. Applies after the previous 4 patches. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] chelsio: free_netdevStephen Hemminger
Network devices need to be free'd with free_netdev() not kfree() otherwise the kernel will panic if an application has /sys/class/net/ethX/value open and reads it. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] chelsio: procectomyStephen Hemminger
Complete removal of proc stuff from chelsio. The orignal driver had a debug proc interface, but not all the code got removed. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] chelsio: whitespace cleanupStephen Hemminger
Whitespace cleanups. Replace leading spaces with tabs and fix indentation Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] chelsio: remove leftover codeStephen Hemminger
The chelsio network driver has some extra ifdef's that got in because the driver was originally based on code that worked on 2.4 as well as 2.6. This patch removes the dead code. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] Adapt ucc_geth driver to use new of_platform_device supportKim Phillips
Include of_platform header, and use new of_[un]register_platform_driver() fns. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] sundance: use NULL for pointerRandy Dunlap
Use NULL instead of 0 for pointers (cures sparse warnings). drivers/net/sundance.c:1106:16: warning: Using plain integer as NULL pointer drivers/net/sundance.c:1652:16: warning: Using plain integer as NULL pointer Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] NetXen: temp monitoring, newer firmware support, mm footprint reductionAmit S. Kale
NetXen: 1G/10G Ethernet Driver updates - Temparature monitoring and device control - Memory footprint reduction - Driver changes to support newer version of firmware Signed-off-by: Amit S. Kale <amitkale@netxen.com> netxen_nic.h | 165 ++++++++++++++++++++++++++++++++-- netxen_nic_ethtool.c | 89 ++++++++++++------ netxen_nic_hdr.h | 71 +++++++++++++- netxen_nic_hw.c | 206 +++++++++++++++++++++++++++++-------------- netxen_nic_hw.h | 8 + netxen_nic_init.c | 239 +++++++++++++++++++++++++++++++++++++++++--------- netxen_nic_ioctl.h | 12 +- netxen_nic_isr.c | 54 +++++------ netxen_nic_main.c | 121 +++++++++++++++++-------- netxen_nic_niu.c | 172 +++++++++++++++++++++++++++-------- netxen_nic_phan_reg.h | 24 ++++- 11 files changed, 891 insertions(+), 270 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] NetXen: Fixed /sys mapping between device and driverAmit S. Kale
Signed-off-by: Amit S. Kale <amitkale@netxen.com> netxen_nic_main.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletion(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] ieee80211: Provide generic get_stats implementationDaniel Drake
bcm43xx and ipw2100 currently duplicate the same simplistic get_stats handler. Additionally, zd1211rw requires the same handler to fix a bug where all stats are reported as 0. This patch adds a generic implementation to the ieee80211 layer, which drivers are free to override. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: Use softmac ERP handling functionalityDaniel Drake
This adds zd1211rw driver support for the softmac functionality I added a while back. We now obey changes in basic rates, use short preamble if it is available (but long if the AP says it's not), and send self-CTS in the proper situations. Locking fixed and improved by Ulrich Kunitz. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: Rename cs_rate to zd_rateDaniel Drake
These controlset rate constants are also applicable in places outside the controlset, such as in the RTS/CTS control register. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: Allow channels 1-13 in JapanDaniel Drake
Eric Goff found that he could not use his ZD1211 device which is programmed for the Japan regulatory domain. It turns out that ZyDAS deviate from the spec here: they do not use the newer Japan region code (0x41) but their drivers do operate as if the newer Japan legal frequency range is in effect. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: Optimized handling of zero length entries in length infoUlrich Kunitz
There are a high number of split USB transactions, which contain only one packet but have a length info field. This patch optimizes this code by stopping parsing the length info structure if a zero length field is encountered. Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: cleanupsUlrich Kunitz
Bit-field constants in zd_chip.h are now defined using a shift expression. The value 0x08 is now (1 << 3). The fix is intended to improve readability. Remove misleading comment in zd_mac.c: The function already returns -EPERM in managed mode (IW_MODE_INFRA). Remove unused code in zd_mac.c: The unused code intended for debugging rx_status values is no longer useful. Added dump_stack() to ZD_ASSERT macro: Output of the stack helps to debug assertions. Keep in mind that the ZD_ASSERT() macro only results in code, if DEBUG is defined. Improved comments for filter_rx() zd_usb.c: Added driver name to module init and exit functions Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: Remove IW_FREQ_AUTO supportDaniel Drake
http://bugzilla.kernel.org/show_bug.cgi?id=7399 zd1211rw's support for IW_FREQ_AUTO is broken: when specified, the driver tries to change to a channel specified in an uninitialized integer. As IW_FREQ_AUTO is hard to implement properly, the solution (at least for now) is to drop support for it and start ignoring the flags like all other wireless drivers do. This has the added advantage that kismet also starts working with zd1211rw, even though kismet requesting IW_FREQ_AUTO is also a bug (fixed in their svn) Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: Add ID for Belkin F5D7050 v4000Daniel Drake
zd1211b chip 050d:705c v4810 high 00-17-3f AL2230_RF pa0 g--N Tested by Bryan Barnard Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 19:39:46 +0000