aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2008-02-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (82 commits) [NET]: Make sure sockets implement splice_read netconsole: avoid null pointer dereference at show_local_mac() [IPV6]: Fix reversed local_df test in ip6_fragment [XFRM]: Avoid bogus BUG() when throwing new policy away. [AF_KEY]: Fix bug in spdadd [NETFILTER] nf_conntrack_proto_tcp.c: Mistyped state corrected. net: xfrm statistics depend on INET [NETFILTER]: make secmark_tg_destroy() static [INET]: Unexport inet_listen_wlock [INET]: Unexport __inet_hash_connect [NET]: Improve cache line coherency of ingress qdisc [NET]: Fix race in dev_close(). (Bug 9750) [IPSEC]: Fix bogus usage of u64 on input sequence number [RTNETLINK]: Send a single notification on device state changes. [NETLABLE]: Hide netlbl_unlabel_audit_addr6 under ifdef CONFIG_IPV6. [NETLABEL]: Don't produce unused variables when IPv6 is off. [NETLABEL]: Compilation for CONFIG_AUDIT=n case. [GENETLINK]: Relax dances with genl_lock. [NETLABEL]: Fix lookup logic of netlbl_domhsh_search_def. [IPV6]: remove unused method declaration (net/ndisc.h). ...
2008-02-15netconsole: avoid null pointer dereference at show_local_mac()Keiichi KII
This patch avoids a null pointer dereference when we read local_mac for netconsole in configfs and shows default local mac address value. A null pointer dereference occurs when we call show_local_mac() via local_mac entry in configfs before we setup the content of netpoll using netpoll_setup(). Signed-off-by: Keiichi KII <k-keiichi@bx.jp.nec.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-14mlx4_core: Move table_find from fmr_alloc to fmr_enableJack Morgenstein
mlx4_table_find (for FMR MPTs) requires that ICM memory already be mapped. Before this fix, FMR allocation depended on ICM memory already being mapped for the MPT entry. If all currently mapped entries are taken, the find operation fails (even if the MPT ICM table still had more entries, which were just not mapped yet). This fix moves the mpt find operation to fmr_enable, to guarantee that any required ICM memory mapping has already occurred. Found by Oren Duer of Mellanox. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-12Merge branch 'upstream-davem' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2008-02-11mlx4_core: Fix build break (missing include)Olof Johansson
Commit 313abe55 ("mlx4_core: For 64-bit systems, vmap() kernel queue buffers") caused this to pop up on powerpc allyesconfig, looks like a missing include file: drivers/net/mlx4/alloc.c: In function 'mlx4_buf_alloc': drivers/net/mlx4/alloc.c:162: error: implicit declaration of function 'vmap' drivers/net/mlx4/alloc.c:162: error: 'VM_MAP' undeclared (first use in this function) drivers/net/mlx4/alloc.c:162: error: (Each undeclared identifier is reported only once drivers/net/mlx4/alloc.c:162: error: for each function it appears in.) drivers/net/mlx4/alloc.c:162: warning: assignment makes pointer from integer without a cast drivers/net/mlx4/alloc.c: In function 'mlx4_buf_free': drivers/net/mlx4/alloc.c:187: error: implicit declaration of function 'vunmap' Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-11ixgbe: remove accidentally added #ifdefAuke Kok
Let's not add these #ifdef NETIF_F_TSO's back. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11ixgbe: Disallow device reset during ethtool testAuke Kok
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11ixgbe: warn when device is in a x4 or lower width slotAuke Kok
It's easy to oversee this issue when working with this card as evrything will work OK but performance is severely limited (something like 1.5gbit on a x1 link) if the pci-express slot does not offer more bandwidth. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11e1000e: Fix logic reversal keeping link activeAuke Kok
A logic mishap caused the adapter to keep link while we can disable it due to WoL not being active, and vice versa. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11e1000: warn if this driver is used for e1000e devicesAuke Kok
We're already starting to see reports from users still using e1000 where they should be using e1000e now that this is actually possible. Just to prevent some of this thrash, add a big warning on load on these devices that people should switch to e1000e. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11replace code with FIELD_SIZEOFJulia Lawall
Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11Tsi108_eth: Add ethtool supportAlex Bounine
Add ethtool support to tsi108_eth network driver. Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11Tsi108_eth: fix link recovery after disconnectAlex Bounine
Bug fix for tsi108_eth network driver. This patch fixes a problem with link recovery after connection was lost. Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11Tsi108_eth: remove not needed codeAlex Bounine
Code clean-up for tsi108_eth network driver. This patch removes not needed dummy read and the corresponding comment. The PHY logic requires two reads from the status register to get current link status. This is done correctly inside mii_check_media(). Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11Tsi108_eth: fix detection of 1000Mb modeAlex Bounine
Bug fix for tsi108_eth network driver. This patch fixes a problem with detection of 1000Mb speed. Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11Tsi108_eth: add missing linking to driver dataAlex Bounine
Bug fix for tsi108_eth network driver. This patch adds missing linking to driver data. Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11net/phy/fixed.c: fix a use-after-freeAdrian Bunk
This patch fixes a use-after-free introduced by commit a79d8e93d300adb84cccc38ac396cfb118c238ad and spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11drivers/net/sis190: fix section mismatch warning in sis190_get_mac_addrSergio Luis
Fix following warnings: WARNING: drivers/net/sis190.o(.text+0x103): Section mismatch in reference from the function sis190_get_mac_addr() to the function .devinit.text:sis190_get_mac_addr_from_apc() WARNING: drivers/net/sis190.o(.text+0x10e): Section mismatch in reference from the function sis190_get_mac_addr() to the function .devinit.text:sis190_get_mac_addr_from_eeprom() Annotate sis190_get_mac_addr() with __devinit. Signed-off-by: Sergio Luis <sergio@uece.br> sis190.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11forcedeth: tx pause watermarksAyaz Abdulla
New chipsets introduced variant Rx FIFO sizes that need to be taken into account when setting up the tx pause watermarks. This patch introduces the new device feature flags based on a version and implements the new watermarks. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11forcedeth: tx collision fixAyaz Abdulla
This patch supports a new fix in hardware regarding tx collisions. In the cases where we are in autoneg mode and the link partner is in forced mode, we need to setup the tx deferral register differently in order to reduce collisions on the wire. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11cxgb3: Handle ARP completions that mark neighbors stale.Steve Wise
When ARP completes due to a request rather than a reply the neighbor is marked NUD_STALE instead of reachable (see arp_process()). The handler for the resulting netevent needs to check also for NUD_STALE. Failure to use the arp entry can cause RDMA connection failures. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Acked-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11Merge branch 'r6040' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/romieu/netdev-2.6 into upstream-fixes
2008-02-11DM9000: Show the MAC address source after printing MACBen Dooks
Show whether the MAC address was read from the EEPROM or the onboard PAR registers. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Update retry count whilst identifying chipBen Dooks
Reading the ID register does not always return the correct ID from the device, so we retry several times to see if we get a correct value. These failures seem to be excaserbated by the speed of the access to the chip (possibly time between issuing the address and then the data cycle). Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Add support for MII ioctl() callsBen Dooks
Add entry to handle the MII ioctl() calls via the generic_mii_ioctl call. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Add platform flag for no attached EEPROMBen Dooks
Allow the platform data to specify to the DM9000 driver that there is no posibility of an attached EEPROM on the device, so default all reads to 0xff and ignore any write operations. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Remove redudant use of "& 0xff"Ben Dooks
The writing of the data should implicitly truncate the data to 8bits, so do not bother with the ands in the code. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Remove cal_CRC() and use ether_crc_le insteadBen Dooks
Remove the cal_CRC as this is basically wrappering the ether_crc_le function, and is only being used by the multicast hash table functions. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Fix delays used by EEPROM read and writeBen Dooks
The code was using a delay of 8ms, when it should have been using the EEPROM status flag from the device to indicate the EEPROM transaction had finished. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Use netif_msg to enable debugging optionsBen Dooks
Use the netif_msg_*() macros to enable the debugging based on the board's msg_enable field. The output still goes via the dev_dbg() macros, so will be tagged and output as appropriate. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Remove unnecessary changelog in header commentBen Dooks
We have a perfectly good version control system, so we do not need to duplicate change comments in the header for this code. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Ensure spinlock held whilst accessing EEPROM registersBen Dooks
Ensure we hold the spinlock whilst the registers and being modified even though we hold the overall lock. This should protect against an interrupt happening whilst we are using the device. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Remove EEPROM initialisation code.Ben Dooks
Remove the old hack to program an initial EEPROM setting into the DM9000 as we now have ethtool support for reading and writing the EEPROM. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Add ethtool control of msg_enable valueBen Dooks
Allow the msg_enable value to be read and written by the ethtool interface. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Add ethtool support for reading and writing EEPROMBen Dooks
Add ethtool support to access the configuration EEPROM connected to the DM9000. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Add mutex to protect accessBen Dooks
Add a mutex to serialise access to the chip functions from entries such as the ethtool and the MII code. This should reduce the amount of time the spinlock is held to protect the address register. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Remove barely used SROM array read.Ben Dooks
The srom array in the board data is only being used in the device probe routines. The probe also only uses the first 6 bytes of an array we spend 512ms reading 128 bytes from. Change to reading the MAC area directly to the MAC address structure. As a side product, we rename the read_srom_word to dm9000_read_eeprom to bring it into line with the rest of the driver. No change is made to the delay in this function, which will be dealt with in a later patch. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Use msleep() instead of udelay()Ben Dooks
We can use sleeping functions when reading and writing the PHY registers, so let us sleep instead of busy waiting for the PHY. Note, this also fixes a bug reading the PHY where only 100uS was being used instead of 150uS Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Do not sleep with spinlock and IRQs heldBen Dooks
The phy read and write routines call udelay() with the board lock held, and with the posibility of IRQs being disabled. Since these delays can be up to 500usec, and are only required as we have to save the chip's address register. To improve the behaviour, hold the lock whilst we are writing and then restore the state before the delay and then repeat the process once the delay has happened. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Add initial ethtool supportBen Dooks
Add support for ethtool operations for the DM9000. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Remove old timer based poll routinesBen Dooks
Remove the timer based MII phy polling, as this is currently broken with the new EEPROM code that now uses mutexes to protect the phy access. This will need to be replaced in the future by some form of mutex safe mechanism for reading the MII phy status. The replacement has not been done here as changing this patch, which is early in the sequence has quite a knock-on effect. Once this series is merged, then a new presentation of an patch to poll the MII link status can be added. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Pass IRQ flags via platform resourcesBen Dooks
Use the flags in the IRQ resource to specify the type of IRQ being requested, so that systems which do not have level-based interrupts, or change the interrupt in some other way can specify this without making an #ifdef mess in the driver. This is specifically designed to undo the change in commit 4e4fc05a2b6e7bd2e0facd96e0c18dceb34d9349 which hardwires the type for everyone but blackfin to IRQT_RISING, which breaks all a number of Simtec boards which use (and setup in the bootloader) active low IRQs. Note, although there where originally objections due to the use of IORESOURCE_IRQ and IRQT_ flags not sharing the same definition, at least <include/linux/interrupt.h> notes these are the same. Signed-off-by: Ben Dooks <ben-linux@fluff.org> CC: Daniel Mack <daniel@caiaq.de> CC: Bryan Wu <bryan.wu@analog.com> CC: Alex Landau <landau.alex@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000 update debugging macros to use debug levelBen Dooks
Change the debug macros to use the compiler to elide any unnecessary debug level, and to allow device configurable debug control. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000 use dev_xxx() instead of printk for output.Ben Dooks
Move to using dev_dbg() and friends for the output of information to the user. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Add platform data to specify external phyBen Dooks
Patch from: Laurent Pinchart <laurentp@cse-semaphore.com> This patch adds a flag to the DM9000 platform data which, when set, configures the device to use an external PHY. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Ben Dooks <ben-linuy@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Fix endian-ness of data accesses.Ben Dooks
Patch from: Laurent Pinchart <laurentp@cse-semaphore.com> This patch splits the receive status in 8bit wide fields and convert the packet length from little endian to CPU byte order. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11Optimize cxgb3 xmit path (a bit)Krishna Kumar
1. Add common code for stopping queue. 2. No need to call netif_stop_queue followed by netif_wake_queue (and infact a netif_start_queue could have been used instead), instead call stop_queue if required, and remove code under USE_GTS macro. 3. There is no need to check for netif_queue_stopped, as the network core guarantees that for us (I am sure every driver could remove that check, eg e1000 - I have tested that path a few billion times with about a few hundred thousand qstops but the condition never hit even once). Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11e1000: Fix for 32 bits platforms with 64 bits resourcesBenjamin Herrenschmidt
The e1000 driver stores the content of the PCI resources into unsigned long's before ioremapping. This breaks on 32 bits platforms that support 64 bits MMIO resources such as ppc 44x. This fixes it by removing those temporary variables and passing directly the result of pci_resource_start/len to ioremap. The side effect is that I removed the assignments to the netdev fields mem_start, mem_end and base_addr, which are totally useless for PCI devices. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> -- drivers/net/e1000/e1000_main.c | 18 +++++------------- 1 file changed, 5 insertions(+), 13 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11PS3: gelic: Add wireless support for PS3Masakazu Mokuno
Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Acked-by: Dan Williams <dcbw@redhat.com> Acked-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11PS3: gelic: Add support for dual network interfaceMasakazu Mokuno
Add support for dual network (net_device) interface so that ethernet and wireless can own separate ethX interfaces. V2 - Fix the bug that bringing down and up the interface keeps rx disabled. - Make 'gelic_net_poll_controller()' extern , as David Woodhouse pointed out at the previous submission. - Fix weird usage of member names for the rx descriptor chain V1 - Export functions which are convenient for both interfaces - Move irq allocation/release code to driver probe/remove handlers because interfaces share interrupts. - Allocate skbs by using dev_alloc_skb() instead of netdev_alloc_skb() as the interfaces share the hardware rx queue. - Add gelic_port struct in order to abstract dual interface handling - Change handlers for hardware queues so that they can handle dual {source,destination} interfaces. - Use new NAPI functions This is a prerequisite for the new PS3 wireless support. Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-02 03:58:50 +0000