aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2010-04-27drivers/usb/net/kaweth.c: add device "Allied Telesyn AT-USB10 USB Ethernet ↵Andreas Hartmann
Adapter" akpm: reluctantly typed in from https://bugzilla.kernel.org/show_bug.cgi?id=15599 Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27bnx2: Update version to 2.0.9.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27bnx2: Prevent "scheduling while atomic" warning with cnic, bonding and vlan.Michael Chan
The bonding driver calls ndo_vlan_rx_register() while holding bond->lock. The bnx2 driver calls bnx2_netif_stop() to stop the rx handling while changing the vlgrp. The call also stops the cnic driver which sleeps while the bond->lock is held and cause the warning. This code path only needs to stop the NAPI rx handling while we are changing the vlgrp. Since no reset is going to occur, there is no need to stop cnic in this case. By adding a parameter to bnx2_netif_stop() to skip stopping cnic, we can avoid the warning. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27bnx2: Fix lost MSI-X problem on 5709 NICs.Michael Chan
It has been reported that under certain heavy traffic conditions in MSI-X mode, the driver can lose an MSI-X vector causing all packets in the associated rx/tx ring pair to be dropped. The problem is caused by the chip dropping the write to unmask the MSI-X vector by the kernel (when migrating the IRQ for example). This can be prevented by increasing the GRC timeout value for these register read and write operations. Thanks to Dell for helping us debug this problem. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27cxgb3: Wait longer for control packets on initializationAndre Detsch
In some Power7 platforms, when using VIOS (Virtual I/O Server), we need to wait longer for control packets to finish transfer during initialization. Without this change, initialization may fail prematurely. Signed-off-by: Wen Xiong <wenxiong@us.ibm.com> Signed-off-by: Andre Detsch <adetsch@br.ibm.com> Acked-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27e1000e: enable/disable ASPM L0s and L1 and ERT according to hardware errataBruce Allan
Prompted by a previous patch submitted by Matthew Garret <mjg@redhat.com>, further digging into errata documentation reveals the current enabling or disabling of ASPM L0s and L1 states for certain parts supported by this driver are incorrect. 82571 and 82572 should always disable L1. For standard frames, 82573/82574/82583 can enable L1 but L0s must be disabled, and for jumbo frames 82573/82574 must disable L1. This allows for some parts to enable L1 in certain configurations leading to better power savings. Also according to the same errata, Early Receive (ERT) should be disabled on 82573 when using jumbo frames. Cc: Matthew Garret <mjg@redhat.com> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27ixgbe: Power down PHY during driver resetsPeter Waskiewicz
The PHY laser is still on during driver init. It's allowing garbage to hit our FIFO, which eventually can cause the entire device to die. Power down the laser while setting up the device, and re-enable the laser before getting link. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-26r8169: more broken register writes workaroundfrançois romieu
78f1cd02457252e1ffbc6caa44a17424a45286b8 ("fix broken register writes") does not work for Al Viro's r8169 (XID 18000000). Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-26r8169: failure to enable mwi should not be fatalfrançois romieu
Few (6) network drivers enable mwi explicitly. Fewer worry about a failure. It is not a fix but it should avoid some annoyance like http://bugzilla.kernel.org/show_bug.cgi?id=15454 Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Conrad Kostecki <conikost@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-26tg3: Fix INTx fallback when MSI failsAndre Detsch
tg3: Fix INTx fallback when MSI fails MSI setup changes the value of irq_vec in struct tg3 *tp. This attribute must be taken into account and restored before we try to do a new request_irq for INTx fallback. In powerpc, the original code was leading to an EINVAL return within request_irq, because the driver was trying to use the disabled MSI virtual irq number instead of tp->pdev->irq. Signed-off-by: Andre Detsch <adetsch@br.ibm.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-24e100: Fix the TX workqueue raceAlan Cox
Nothing stops the workqueue being left to run in parallel with close or a few other operations. This causes double unmaps and the like. See kerneloops.org #1041230 for an example Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-23gianfar: Fix potential oops during OF address translationAnton Vorontsov
gianfar driver may pass NULL pointer to the of_translate_address(), which may lead to a kernel oops. Fix this by using of_iomap(), which is also much simpler and shorter. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-23fsl_pq_mdio: Fix kernel oops during OF address translationAnton Vorontsov
Old P1020RDB device trees were not specifing tbipa address for MDIO nodes, which is now causing this kernel oops: ... eth2: TX BD ring size for Q[6]: 256 eth2: TX BD ring size for Q[7]: 256 Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc0015504 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c0015504] memcpy+0x3c/0x9c LR [c000a9f8] __of_translate_address+0xfc/0x21c Call Trace: [df839e00] [c000a94c] __of_translate_address+0x50/0x21c (unreliable) [df839e50] [c01a33e8] get_gfar_tbipa+0xb0/0xe0 ... The old device trees are buggy, though having a dead ethernet is better than a dead kernel, so fix the issue by using of_iomap(). Also, a somewhat similar issue exist in the probe() routine, though there the oops is only a possibility. Nonetheless, fix it too. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21drivers/net/usb: Add new driver iphethDiego Giagio
Add new driver to use tethering with an iPhone device. After initial submission, apply fixes to fit the new driver into the kernel standards. There are still a couple of minor (almost cosmetic-level) issues, but the driver is fully functional right now. Signed-off-by: L. Alberto Giménez <agimenez@sysvalve.es> Signed-off-by: Diego Giagio <diego@giagio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21cxgb3: fix linkup issueHiroshi Shimamoto
I encountered an issue that not to link up on cxgb3 fabric. I bisected and found that this regression was introduced by 0f07c4ee8c800923ae7918c231532a9256233eed. Correct to pass phy_addr to cphy_init() at t3_xaui_direct_phy_prep(). Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Acked-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21KS8851: NULL pointer dereference if list is emptyAbraham Arce
Fix NULL pointer dereference in ks8851_tx_work by checking if dequeued list is already empty before writing the packet to TX FIFO Unable to handle kernel NULL pointer dereference at virtual address 00000050 PC is at ks8851_tx_work+0xdc/0x1b0 LR is at wait_for_common+0x148/0x164 pc : [<c01c0df4>] lr : [<c025a980>] psr: 20000013 Backtrace: ks8851_tx_work+0x0/0x1b0 worker_thread+0x0/0x190 kthread+0x0/0x90 Signed-off-by: Abraham Arce <x0066660@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21net: 3c574_cs fix stats.tx_bytes counterAlexander Kurz
Update the stats counter calculation in 3c574_cs, similar to the method used in 3c589_cs. This corrects the contents of the counter on tests using a "Megahertz 574B" card. [linux@dominikbrodowski.net: clean up commit message] Signed-off-by: Alexander Kurz <linux@kbdbabel.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21can: Fix possible NULL pointer dereference in ems_usb.cHans J. Koch
In ems_usb_probe(), a pointer is dereferenced after making sure it is NULL... This patch replaces netdev->dev.parent with &intf->dev in dev_err() calls to avoid this. Signed-off-by: "Hans J. Koch" <hjk@linutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-20Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-04-198139too: Fix a typo in the function name.Alexander Kuznetsov
Signed-off-by: Alexander Kuznetsov <alr.kuznetsov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-16WAN: flush tx_queue in hdlc_ppp to prevent panic on rmmod hw_driver.Krzysztof Halasa
tx_queue is used as a temporary queue when not allowed to queue skb directly to the hw device driver (which may sleep). Most paths flush it before returning, but ppp_start() currently cannot. Make sure we don't leave skbs pointing to a non-existent device. Thanks to Michael Barkowski for reporting this problem. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-16iwlwifi: correct 6000 EEPROM regulatory addressShanyu Zhao
For 6000 series, the 2.4G HT40 band regulatory settings address in EEPROM was off by 2. Before the fix, you'll see this in dmesg: [79535.788877] ieee80211 phy8: U iwl_mod_ht40_chan_info HT40 Ch. 7 [2.4GHz] WIDE (0x61 0dBm): Ad-Hoc not supported [79535.788880] ieee80211 phy8: U iwl_mod_ht40_chan_info HT40 Ch. 11 [2.4GHz] WIDE (0x61 0dBm): Ad-Hoc not supported And after the fix: [91132.688706] ieee80211 phy14: U iwl_mod_ht40_chan_info HT40 Ch. 7 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported [91132.688709] ieee80211 phy14: U iwl_mod_ht40_chan_info HT40 Ch. 11 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: fix scan racesJohannes Berg
When an internal scan is started, nothing protects the is_internal_short_scan variable which can cause crashes, cf. https://bugzilla.kernel.org/show_bug.cgi?id=15667. Fix this by making the short scan request use the mutex for locking, which requires making the request go to a work struct so that it can sleep. Reported-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-15Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-04-14tun: orphan an skb on txMichael S. Tsirkin
The following situation was observed in the field: tap1 sends packets, tap2 does not consume them, as a result tap1 can not be closed. This happens because tun/tap devices can hang on to skbs undefinitely. As noted by Herbert, possible solutions include a timeout followed by a copy/change of ownership of the skb, or always copying/changing ownership if we're going into a hostile device. This patch implements the second approach. Note: one issue still remaining is that since skbs keep reference to tun socket and tun socket has a reference to tun device, we won't flush backlog, instead simply waiting for all skbs to get transmitted. At least this is not user-triggerable, and this was not reported in practice, my assumption is other devices besides tap complete an skb within finite time after it has been queued. A possible solution for the second issue would not to have socket reference the device, instead, implement dev->destructor for tun, and wait for all skbs to complete there, but this needs some thought, probably too risky for 2.6.34. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Yan Vugenfirer <yvugenfi@redhat.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-13forcedeth: fix tx limit2 flag checkAyaz Abdulla
This is a fix for bug 572201 @ bugs.debian.org This patch fixes the TX_LIMIT feature flag. The previous logic check for TX_LIMIT2 also took into account a device that only had TX_LIMIT set. Reported-by: Stephen Mulcahu <stephen.mulcahy@deri.org> Reported-by: Ben Huchings <ben@decadent.org.uk> Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-13smc91c92_cs: define multicast_table as unsigned charKen Kawasaki
smc91c92_cs: * define multicast_table as unsigned char * remove unnecessary "#ifndef final_version" Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-13e1000e: stop cleaning when we reach tx_ring->next_to_useTerry Loftin
Tx ring buffers after tx_ring->next_to_use are volatile and could change, possibly causing a crash. Stop cleaning when we hit tx_ring->next_to_use. Signed-off-by: Terry Loftin <terry.loftin@hp.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-13igb: restrict WoL for 82576 ET2 Quad Port Server AdapterStefan Assmann
Restrict Wake-on-LAN to first port on 82576 ET2 quad port NICs, as it is only supported there. Signed-off-by: Stefan Assmann <sassmann@redhat.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-12virtio_net: missing sg_init_tableShirley Ma
Add missing sg_init_table for sg_set_buf in virtio_net which induced in defer skb patch. Reported-by: Thomas Müller <thomas@mathtm.de> Tested-by: Thomas Müller <thomas@mathtm.de> Signed-off-by: Shirley Ma <xma@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-11Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
2010-04-09iwlwifi: work around bogus active chains detectionJohannes Berg
The current algorithm will sometimes "detect" that more chains are enabled than are really present in the device because, for unknown reasons, the ucode sends up all-zeroes signal values. The simplest way of solving this is to restrict the active chains mask to the chains we know are really present on the device. This fixes a bug with some devices where, since sometimes more chains are enabled than really present, the system would hang. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-09Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-04-08iwlwifi: need check for valid qos packet before freeWey-Yi Guy
For 4965, need to check it is valid qos frame before free, only valid QoS frame has the tid used to free the packets. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-07myri10ge: fix rx_pause in myri10ge_set_pauseparamBrice Goglin
Fix rx_pause management in myri10ge_set_pauseparam(). Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07stmmac: use resource_size()Dan Carpenter
Resource size should be calculated as end - start + 1 because we start counting at zero. I changed the code to resource_size() to do the calculation. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07cnic: Fix crash during bnx2x MTU change.Michael Chan
cnic_service_bnx2x() irq handler can be called during chip reset from MTU change. Need to check that the cnic's device state is up before handling the irq. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07qlcnic: fix set mac addrAmit Kumar Salecha
If interface is down, mac address request are not sent to fw but it is getting add in driver mac list. Driver mac list should be in sync with fw i.e addresses communicated to fw. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07r6040: fix r6040_multicast_listFlorian Fainelli
As reported in <https://bugzilla.kernel.org/show_bug.cgi?id=15355>, r6040_ multicast_list currently crashes. This is due a wrong maximum of multicast entries. This patch fixes the following issues with multicast: - number of maximum entries if off-by-one (4 instead of 3) - the writing of the hash table index is not necessary and leads to invalid values being written into the MCR1 register, so the MAC is simply put in a non coherent state - when we exceed the maximum number of mutlticast address, writing the broadcast address should be done in registers MID_1{L,M,H} instead of MID_O{L,M,H}, otherwise we would loose the adapter's MAC address Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-04-06ath9k: fix double calls to ath_radio_enableFelix Fietkau
With the enable_radio being uninitialized, ath_radio_enable() might be called twice, which can leave some hardware in an undefined state. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits) smc91c92_cs: fix the problem of "Unable to find hardware address" r8169: clean up my printk uglyness net: Hook up cxgb4 to Kconfig and Makefile cxgb4: Add main driver file and driver Makefile cxgb4: Add remaining driver headers and L2T management cxgb4: Add packet queues and packet DMA code cxgb4: Add HW and FW support code cxgb4: Add register, message, and FW definitions netlabel: Fix several rcu_dereference() calls used without RCU read locks bonding: fix potential deadlock in bond_uninit() net: check the length of the socket address passed to connect(2) stmmac: add documentation for the driver. stmmac: fix kconfig for crc32 build error be2net: fix bug in vlan rx path for big endian architecture be2net: fix flashing on big endian architectures be2net: fix a bug in flashing the redboot section bonding: bond_xmit_roundrobin() fix drivers/net: Add missing unlock net: gianfar - align BD ring size console messages net: gianfar - initialize per-queue statistics ...
2010-04-03smc91c92_cs: fix the problem of "Unable to find hardware address"Ken Kawasaki
smc91c92_cs: *cvt_ascii_address returns 0, if success. *call free_netdev, if we can't find hardware address. Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-02iwlwifi: avoid Tx queue memory allocation in interface downZhu Yi
We used to free all the Tx queues memory when interface is brought down and reallocate them again in interface up. This requires order-4 allocation for txq->cmd[]. In situations like s2ram, this usually leads to allocation failure in the memory subsystem. The patch fixed this problem by allocating the Tx queues memory only at the first time. Later iwl_down/iwl_up only initialize but don't free and reallocate them. The memory is freed at the device removal time. BTW, we have already done this for the Rx queue. This fixed bug https://bugzilla.kernel.org/show_bug.cgi?id=15551 Signed-off-by: Zhu Yi <yi.zhu@intel.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-02iwlwifi: use consistent table for tx data collectShanyu Zhao
When collecting tx data for non-aggregation packets in rate scaling, if the tx data matches "other table", it still uses current table to update the stats and calculate average throughput in function rs_collect_tx_data(). This can mess up the rate scaling data structure and cause a kernel panic in a BUG_ON statement in rs_rate_scale_perform(). To fix this bug, we pass table pointer instead of window pointer (pointed to by table pointer) to function rs_collect_tx_data() so that the table being used is consistent. Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Henry Zhang <hongx.c.zhang@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-02iwlwifi: fix DMA allocation warningsZhu Yi
Below warning is triggered sometimes at module removal time when CONFIG_DMA_API_DEBUG is enabled. This should be caused by we didn't unmap pending commands (enqueued, but no complete notification received) for the Tx command queue. [ 1583.107469] ------------[ cut here ]------------ [ 1583.107539] WARNING: at lib/dma-debug.c:688 dma_debug_device_change+0x13c/0x180() [ 1583.107617] Hardware name: ... [ 1583.107664] pci 0000:04:00.0: DMA-API: device driver has pending DMA allocations while released from device [count=1] [ 1583.107713] Modules linked in: ... [ 1583.111661] Pid: 16970, comm: modprobe Tainted: G W 2.6.34-rc1-wl #33 [ 1583.111727] Call Trace: [ 1583.111779] [<c02a281c>] ? dma_debug_device_change+0x13c/0x180 [ 1583.111833] [<c02a281c>] ? dma_debug_device_change+0x13c/0x180 [ 1583.111908] [<c0138e11>] warn_slowpath_common+0x71/0xd0 [ 1583.111963] [<c02a281c>] ? dma_debug_device_change+0x13c/0x180 [ 1583.112016] [<c0138ebb>] warn_slowpath_fmt+0x2b/0x30 [ 1583.112086] [<c02a281c>] dma_debug_device_change+0x13c/0x180 [ 1583.112142] [<c03e6c33>] notifier_call_chain+0x53/0x90 [ 1583.112198] [<c03e1ebe>] ? down_read+0x6e/0x90 [ 1583.112271] [<c015b229>] __blocking_notifier_call_chain+0x49/0x70 [ 1583.112326] [<c015b26f>] blocking_notifier_call_chain+0x1f/0x30 [ 1583.112380] [<c031931c>] __device_release_driver+0x8c/0xa0 [ 1583.112451] [<c03193bf>] driver_detach+0x8f/0xa0 [ 1583.112538] [<c0318382>] bus_remove_driver+0x82/0x100 [ 1583.112595] [<c0319ad9>] driver_unregister+0x49/0x80 [ 1583.112671] [<c024feb2>] ? sysfs_remove_file+0x12/0x20 [ 1583.112727] [<c02aa292>] pci_unregister_driver+0x32/0x80 [ 1583.112791] [<fc13a3c1>] iwl_exit+0x12/0x19 [iwlagn] [ 1583.112848] [<c017940a>] sys_delete_module+0x15a/0x210 [ 1583.112870] [<c015a5db>] ? up_read+0x1b/0x30 [ 1583.112893] [<c029600c>] ? trace_hardirqs_off_thunk+0xc/0x10 [ 1583.112924] [<c0295ffc>] ? trace_hardirqs_on_thunk+0xc/0x10 [ 1583.112947] [<c03e6a1f>] ? do_page_fault+0x1ff/0x3c0 [ 1583.112978] [<c03e36f6>] ? restore_all_notrace+0x0/0x18 [ 1583.113002] [<c016aa70>] ? trace_hardirqs_on_caller+0x20/0x190 [ 1583.113025] [<c0102d58>] sysenter_do_call+0x12/0x38 [ 1583.113054] ---[ end trace fc23e059cc4c2ced ]--- Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-01r8169: clean up my printk uglynessNeil Horman
Fix formatting on r8169 printk Brandon Philips noted that I had a spacing issue in my printk for the last r8169 patch that made it quite ugly. Fix that up and add the PFX macro to it as well so it looks like the other r8169 printks Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-01net: Hook up cxgb4 to Kconfig and MakefileDimitris Michailidis
Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-01cxgb4: Add main driver file and driver MakefileDimitris Michailidis
Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-01cxgb4: Add remaining driver headers and L2T managementDimitris Michailidis
Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 10:03:16 +0000