aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2007-08-25DM9000: fix interface hang under loadFlorian Westphal
When transferring data at full speed, the DM9000 network interface sometimes stops sending/receiving data. Worse, ksoftirqd consumes 100% cpu and the net tx watchdog never triggers. Fix by spin_lock_irqsave() in dm9000_start_xmit() to prevent the interrupt handler from interfering. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25phy layer: fix genphy_setup_forced (don't reset)Domen Puncer
Writing BMCR_RESET bit will reset MII_BMCR to default values. This is clearly not what we want. Signed-off-by: Domen Puncer <domen.puncer@telargo.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25Don't use GFP_DMA for zone allocation.Ralf Baechle
IP32 doesn't even have a ZONE_DMA so no point in using GFP_DMA in any IP32-specific device driver. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25fix realtek phy id in forcedethWilly Tarreau
As noticed by Chuck Ebbert, commit c5e3ae8823693b260ce1f217adca8add1bc0b3de introduced a copy-paste typo, as realtek phy is 0x732 and not 0x1c1. Obvious fix below suggested by Ayaz Abdulla. Signed-off-by: Willy Tarreau <w@1wt.eu> Cc: Ayaz Abdulla <aabdulla@nvidia.com> Cc: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-21[PPP]: Fix output buffer size in ppp_decompress_frame().Konstantin Sharlaimov
This patch addresses the issue with "osize too small" errors in mppe encryption. The patch fixes the issue with wrong output buffer size being passed to ppp decompression routine. -------------------- As pointed out by Suresh Mahalingam, the issue addressed by ppp-fix-osize-too-small-errors-when-decoding patch is not fully resolved yet. The size of allocated output buffer is correct, however it size passed to ppp->rcomp->decompress in ppp_generic.c if wrong. The patch fixes that. -------------------- Signed-off-by: Konstantin Sharlaimov <konstantin.sharlaimov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-21sky2: don't clear phy power bitsStephen Hemminger
There are special PHY settings available on Yukon EC-U chip that should not get cleared. This should solve mysterious errors on some motherboards (like Gigabyte DS-3). Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-18fix random hang in forcedeth driver when using netconsoleTimo Jantunen
If the forcedeth driver receives too much work in an interrupt, it assumes it has a broken hardware with stuck IRQ. It works around the problem by disabling interrupts on the nic but makes a printk while holding device spinlog - which isn't smart thing to do if you have netconsole on the same nic. This patch moves the printk's out of the spinlock protected area. Without this patch the machine hangs hard. With this patch everything still works even when there is significant increase on CPU usage while using the nic. Signed-off-by: Timo Jantunen <jeti@iki.fi> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-18Add some help texts to recently-introduced kconfig itemsJan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (edited MACINTOSH_DRIVERS per Geert Uytterhoeven's remark) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mlx4: Incorrect semicolon after if statement mlx4_core: Wait 1 second after reset before accessing device IPoIB: Fix leak in ipoib_transport_dev_init() error path IB/mlx4: Fix opcode returned in RDMA read completion IB/srp: Add OUI for new Cisco targets IB/srp: Wrap OUI checking for workarounds in helper functions RDMA/cxgb3: Always call low level send function via cxgb3_ofld_send() IB: Move the macro IB_UMEM_MAX_PAGE_CHUNK() to umem.c IB: Include <linux/list.h> and <linux/rwsem.h> from <rdma/ib_verbs.h> IB: Include <linux/list.h> from <rdma/ib_mad.h> IB/mad: Fix address handle leak in mad_rmpp IB/mad: agent_send_response() should be void IB/mad: Fix memory leak in switch handling in ib_mad_recv_done_handler() IB/mad: Fix error path if response alloc fails in ib_mad_recv_done_handler() IB/sa: Don't need to check for default P_Key twice IB/core: Ignore membership bit in ib_find_pkey()
2007-08-14Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IPVS]: Use IP_VS_WAIT_WHILE when encessary. [NET]: Share correct feature code between bridging and bonding [ATM] drivers/atm/iphase.c: mostly kmalloc + memset conversion to kzalloc [IRDA] irda-usb.c: mostly kmalloc + memset conversion to k[cz]alloc [WAN] drivers/net/wan/hdlc_fr.c: kmalloc + memset conversion to kzalloc [DCCP]: fix memory leak and clean up style - dccp_feat_empty_confirm() [DCCP]: fix theoretical ccids_{read,write}_lock() race [XFRM]: Clean up duplicate includes in net/xfrm/ [TIPC]: Clean up duplicate includes in net/tipc/ [SUNRPC]: Clean up duplicate includes in net/sunrpc/ [PKT_SCHED]: Clean up duplicate includes in net/sched/ [IPV6]: Clean up duplicate includes in net/ipv6/ [IPV4]: Clean up duplicate includes in net/ipv4/ [ATM]: Clean up duplicate includes in net/atm/ [ATM]: Clean up duplicate includes in drivers/atm/ [IPCONFIG]: ip_auto_config fix [ATM]: fore200e_param_bs_queue() must be __devinit
2007-08-14e1000: Add device IDs of new 82571 board variantsAuke Kok
This patch adds support for 2 new board variants: - A Quad port fiber 82571 board - A blade version of the 82571 quad copper board Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-13[NET]: Share correct feature code between bridging and bondingHerbert Xu
http://bugzilla.kernel.org/show_bug.cgi?id=8797 shows that the bonding driver may produce bogus combinations of the checksum flags and SG/TSO. For example, if you bond devices with NETIF_F_HW_CSUM and NETIF_F_IP_CSUM you'll end up with a bonding device that has neither flag set. If both have TSO then this produces an illegal combination. The bridge device on the other hand has the correct code to deal with this. In fact, the same code can be used for both. So this patch moves that logic into net/core/dev.c and uses it for both bonding and bridging. In the process I've made small adjustments such as only setting GSO_ROBUST if at least one constituent device supports it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-13[IRDA] irda-usb.c: mostly kmalloc + memset conversion to k[cz]allocMariusz Kozlowski
drivers/net/irda/irda-usb.c | 59694 -> 59541 (-153 bytes) drivers/net/irda/irda-usb.o | 170588 -> 169256 (-1332 bytes) Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-13[WAN] drivers/net/wan/hdlc_fr.c: kmalloc + memset conversion to kzallocMariusz Kozlowski
drivers/net/wan/hdlc_fr.c | 31260 -> 31223 (-37 bytes) drivers/net/wan/hdlc_fr.o | 144872 -> 144728 (-144 bytes) Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Acked-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-08-14xen-netfront: Avoid deref'ing skbafter it is potentially freed.Jeremy Fitzhardinge
xennet_tx_bug_gc can free the skb before we use it, so make sure we don't. Signed-off-by: Keir Fraser <keir@xensource.com> Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-143c59x: fix duplex configurationSteffen Klassert
A special sequence of ifconfig up/down and plug/unplug the cable can break the duplex configuration of the driver. Setting vp->mii.full_duplex = vp->full_duplex in vortex_up should fix this. Addresses Bug 8575 3c59x duplex configuration broken http://bugzilla.kernel.org/show_bug.cgi?id=8575 Cc: Martin Buck <mb-tmp-ohtmvyyn.xreary.bet@gromit.dyndns.org> Signed-off-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de> Cc: Natalie Protasevich <protasnb@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-14natsemi: fix netdev error acountingAndrew Morton
When a detailed netdev error is counted, we also must account for it in the aggregated error count. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=8106 Cc: Tim Hockin <thockin@hockin.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Chongfeng Hu <loveminix@yahoo.com.cn> Cc: Natalie Protasevich <protasnb@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-14ax88796 printk fixesAndrew Morton
drivers/net/ax88796.c: In function `ax_probe': drivers/net/ax88796.c:825: warning: size_t format, different type arg (arg 4) drivers/net/ax88796.c:825: warning: size_t format, different type arg (arg 5) resource_size_t isn't size_t. Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-14myri10ge: Use the pause counter to avoid a needless device resetBrice Goglin
Use the pause counter to avoid a needless device reset, and print a message telling the admin that our link partner is flow controlling us down to 0 pkts/sec. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-14via-rhine: disable rx_copybreak on archs that don't allow unaligned DMA accessDustin Marquess
Patch to disable the rx_copybreak feature on hardware architectures that don't allow unaligned DMA access. #ifdef code taken from tulip_core.c. Problem pointed out by Ivan Kokshaysky. Signed-off-by: Dustin Marquess <jailbird@alcatraz.fdf.net> Cc: Francois Romieu <romieu@fr.zoreil.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-13mlx4_core: Wait 1 second after reset before accessing deviceEli Cohen
Put a 1000 msec delay after resetting the device before attempting to do config cycles on it. Not waiting causes system hangs on some chipsets, e.g. Intel E7520, when the driver is loaded. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-07drivers/net/ibmveth.c: memset fixMariusz Kozlowski
> >> Looks like memset() is zeroing wrong nr of bytes. > > > > Good catch, however, I think we can just remove this memset altogether > > since the memory gets allocated via kzalloc. > > Correct, that memset() is superfluous. Ok. Then this should do it. Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> drivers/net/ibmveth.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-07phy layer: fix phy_mii_ioctl for autonegotiationDomen Puncer
Fix a thinko (?) in setting phydev->autoneg. Signed-off-by: Domen Puncer <domen.puncer@telargo.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-07ehea: Eliminated some compiler warningsThomas Klein
Fixed wrongly casted pointers Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-07ehea: Simplify resource usage checkThomas Klein
Use shorter method to determine whether adapter has configured ports Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-07ehea: Fix workqueue handlingThomas Klein
Fix: Workqueue ehea_driver_wq was not destroyed Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-07ibmveth: Fix rx pool deactivate oopsBrian King
This fixes the following oops which can occur when trying to deallocate receive buffer pools using sysfs with the ibmveth driver. NIP: d00000000024f954 LR: d00000000024fa58 CTR: c0000000000d7478 REGS: c00000000ffef9f0 TRAP: 0300 Not tainted (2.6.22-ppc64) MSR: 8000000000009032 <EE,ME,IR,DR> CR: 24242442 XER: 00000010 DAR: 00000000000007f0, DSISR: 0000000042000000 TASK = c000000002f91360[2967] 'bash' THREAD: c00000001398c000 CPU: 2 GPR00: 0000000000000000 c00000000ffefc70 d000000000262d30 c00000001c4087a0 GPR04: 00000003000000fe 0000000000000000 000000000000000f c000000000579d80 GPR08: 0000000000365688 c00000001c408998 00000000000007f0 0000000000000000 GPR12: d000000000251e88 c000000000579d80 00000000200957ec 0000000000000000 GPR16: 00000000100b8808 00000000100feb30 0000000000000000 0000000010084828 GPR20: 0000000000000000 000000001014d4d0 0000000000000010 c00000000ffefeb0 GPR24: c00000001c408000 0000000000000000 c00000001c408000 00000000ffffb054 GPR28: 00000000000000fe 0000000000000003 d000000000262700 c00000001c4087a0 NIP [d00000000024f954] .ibmveth_remove_buffer_from_pool+0x38/0x108 [ibmveth] LR [d00000000024fa58] .ibmveth_rxq_harvest_buffer+0x34/0x78 [ibmveth] Call Trace: [c00000000ffefc70] [c0000000000280a8] .dma_iommu_unmap_single+0x14/0x28 (unreliable) [c00000000ffefd00] [d00000000024fa58] .ibmveth_rxq_harvest_buffer+0x34/0x78 [ibmveth] [c00000000ffefd80] [d000000000250e40] .ibmveth_poll+0xd8/0x434 [ibmveth] [c00000000ffefe40] [c00000000032da8c] .net_rx_action+0xdc/0x248 [c00000000ffefef0] [c000000000068b4c] .__do_softirq+0xa8/0x164 [c00000000ffeff90] [c00000000002789c] .call_do_softirq+0x14/0x24 [c00000001398f6f0] [c00000000000c04c] .do_softirq+0x68/0xac [c00000001398f780] [c000000000068ca0] .irq_exit+0x54/0x6c [c00000001398f800] [c00000000000c8e4] .do_IRQ+0x170/0x1ac [c00000001398f890] [c000000000004790] hardware_interrupt_entry+0x18/0x1c Exception: 501 at .plpar_hcall_norets+0x24/0x94 LR = .veth_pool_store+0x15c/0x298 [ibmveth] [c00000001398fb80] [d000000000250b2c] .veth_pool_store+0x5c/0x298 [ibmveth] (unreliable) [c00000001398fc30] [c000000000145530] .sysfs_write_file+0x140/0x1d8 [c00000001398fcf0] [c0000000000de89c] .vfs_write+0x120/0x208 [c00000001398fd90] [c0000000000df2c8] .sys_write+0x4c/0x8c [c00000001398fe30] [c0000000000086ac] syscall_exit+0x0/0x40 Instruction dump: fba1ffe8 fbe1fff8 789d0022 f8010010 f821ff71 789c0020 1d3d00a8 7b8a1f24 38000000 7c7f1b78 7d291a14 e9690128 <7c0a592a> e8030000 e9690120 80a90100 Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-07Merge branch 'r8169-for-jeff-20070806' of ↵Jeff Garzik
git://electric-eye.fr.zoreil.com/home/romieu/linux-2.6 into upstream-fixes
2007-08-07Merge branch 'fixes-jgarzik' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2007-08-07Merge branch 'ucc_geth' of ↵Jeff Garzik
master.kernel.org:/pub/scm/linux/kernel/git/leo/fsl-soc into upstream-fixes
2007-08-07sis190 check for ISA bridge on SiS966Neil Muller
sis190 driver assumes to find ISA only on SiS965. similar fix is in sis900 driver, see bug report http://bugs.debian.org/435547 Signed-off-by: maximilian attems <max@stro.at> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-07atl1: use spin_trylock_irqsave()Ingo Molnar
use the simpler spin_trylock_irqsave() API to get the adapter lock. [ this is also a fix for -rt where adapter->lock is a sleeping lock. ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-07net: smc91x: Build fixes for general sh boards.Paul Mundt
SH boards in general only wire this up in 8 or 16-bit mode, and as we never had the wrappers for 32-bit mode defined, SMC_CAN_USE_32BIT caused build failure for the non-Solution Engine boards. This gets it building again. Also kill off the straggling set_irq_type() definition, this is left over cruft that was missed when the rest of it switched to IRQ flags. Signed-off-by: Paul Mundt <lethal@linux-sh.org> -- drivers/net/smc91x.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-07r8169: avoid needless NAPI poll schedulingFrancois Romieu
Theory : though needless, it should not have hurt. Practice: it does not play nice with DEBUG_SHIRQ + LOCKDEP + UP (see https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=242572). The patch makes sense in itself but I should dig why it has an effect on #242572 (assuming that NAPI do not change in a near future). Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-08-06r8169: PHY power-on fixRoger So
Fix extracted from Realtek's driver (8.002.00/20070713) for the PHY attached to 8111/8168b chipsets. The check against mac_version is just usual paranoia during the bugfix period of the kernel cycle. -- FR Tested on Asus M2A-VM motherboard by Roger So. No regression on my Asrock 945G DVI either (built-in 8168 + 2x8169). Signed-off-by: Roger So <roger.so@gmail.com> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-08-06[PATCH] zd1211rw: fix filter for PSPOLL framesUlrich Kunitz
While filling the control set the driver tests for a PSPOLL frame. But it tested only the subtype of the packet. The full type needs to be tested to identify those packets reliably. [dsd@gentoo.org: backport to mainline] Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-08-06[PATCH] rtl8187: ensure priv->hwaddr is always validMichael Wu
conf->mac_addr is not guaranteed to be set. This ensures priv->hwaddr is always set to a valid mac address. Thanks to Johannes Berg <johannes@sipsolutions.net> for finding this problem. Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-08-06Revert "[PATCH] bcm43xx: Fix deviation from specifications in ↵John W. Linville
set_baseband_attenuation" This reverts commit 77548f58070894cf5970a110981e511ffe793369. David Woodhouse wrote: >This broke my shinybook. I seem to get absolutely _no_ outgoing packets, >although I can receive OK. Larry Finger wrote: >Please revert this patch. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-08-03[BNX2]: Fix suspend/resume problem.Michael Chan
The device would not resume properly if it was shutdown before the system was suspended. In such scenario where the netif_running state is 0, bnx2_suspend() would not save the PCI state and so the memory enable bit and bus master enable bit would be lost. We fix this by always saving and restoring the PCI state in bnx2_suspend() and bnx2_resume() regardless of netif_running() state. Update version to 1.6.4. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-03[TG3]: Fix suspend/resume problem.Michael Chan
Joachim Deguara <joachim.deguara@amd.com> reported that tg3 devices would not resume properly if the device was shutdown before the system was suspended. In such scenario where the netif_running state is 0, tg3_suspend() would not save the PCI state and so the memory enable bit and bus master enable bit would be lost. We fix this by always saving and restoring the PCI state in tg3_suspend() and tg3_resume() regardless of netif_running() state. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-03fix s2io regressionAl Viro
* wrong argument passed to pci_unmap_single() on failure exit paths * leak in the same area Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-03ucc_geth: remove get_perm_addr from ucc_geth_ethtool.cJan Altenberg
This is needed because commit 313674afa8fdced2fe79f50f38e1c387b63d8790 inlines the generic function to the caller. Signed-off-by: Jan Altenberg <jan.altenberg@linutronix.de> Signed-off-by: Li Yang <leoli@freescale.com>
2007-08-03ucc_geth: fix section mismatchDomen Puncer
This fix section mismatch: reference to .exit.text:uec_mdio_exit (between 'ucc_geth_init' and 'uec_mdio_init') void __exit uec_mdio_exit(void) is called from - static int __init ucc_geth_init(void) - static void __exit ucc_geth_exit(void) First one would make error path more than just an error. Signed-off-by: Domen Puncer <domen.puncer@telargo.com> Signed-off-by: Li Yang <leoli@freescale.com>
2007-07-31Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (41 commits) [RTNETLINK]: Fix warning for !CONFIG_KMOD [IPV4] ip_options.c: kmalloc + memset conversion to kzalloc [DECNET]: kmalloc + memset conversion to kzalloc [NET]: ethtool_perm_addr only has one implementation [NET]: ethtool ops are the only way [PPPOE]: Improve hashing function in hash_item(). [XFRM]: State selection update to use inner addresses. [IPSEC]: Ensure that state inner family is set [TCP]: Bidir flow must not disregard SACK blocks for lost marking [TCP]: Fix ratehalving with bidirectional flows [PPPOL2TP]: Add CONFIG_INET Kconfig dependency. [NET]: Page offsets and lengths need to be __u32. [AF_UNIX]: Make code static. [NETFILTER]: Make nf_ct_ipv6_skip_exthdr() static. [PKTGEN]: make get_ipsec_sa() static and non-inline [PPPoE]: move lock_sock() in pppoe_sendmsg() to the right location [PPPoX/E]: return ENOTTY on unknown ioctl requests [IPV6]: ipv6_addr_type() doesn't know about RFC4193 addresses. [NET]: Fix prio_tune() handling of root qdisc. [NET]: Fix sch_api to properly set sch->parent on the root. ...
2007-07-31Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [BBC_I2C]: kmalloc + memset conversion to kzalloc [BBC_ENVCTRL]: kmalloc + memset conversion to kzalloc [SPARC]: Fix exec failures on sun4c. [SPARC] Videopix Frame Grabber: Fix unreleased lock in vfc_debug() [SPARC64]: Add missing dma_get_cache_alignment(). [SUNLANCE]: Fix sparc32 crashes by using of_*() interfaces.
2007-07-31Typo fixes errror -> errorGabriel Craciunescu
Typo fixes errror -> error Signed-off-by: Gabriel Craciunescu <nix.or.die@googlemail.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31in-string typos of "error"Eddy L O Jansson
One patch for two trivial typos of 'error' with three R's, appearing in message strings. There's a bunch more of the same in comments, not dealt with here. Signed-off-by: Eddy L O Jansson <eddy@klopper.net> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31bpqether: fix rcu usagePaul E. McKenney
The rcu_dereference() primitive needs to be applied to an l-value in order to ensure that compiler writers don't get an opportunity to apply reordering optimizations that could result in multiple fetches or in other misbehavior. This patch pulls the rcu_dereference() calls in bpq_seq_next() up to the point at which the fetched pointers are still l-values, rather than after list_entry() has transformed them into r-values. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31DDB5477: remove driver bits of supportYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31[NET]: ethtool_perm_addr only has one implementationMatthew Wilcox
All drivers implement ethtool get_perm_addr the same way -- by calling the generic function. So we can inline the generic function into the caller and avoid going through the drivers. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 03:58:55 +0000