aboutsummaryrefslogtreecommitdiff
path: root/drivers/of/base.c
AgeCommit message (Collapse)Author
2009-04-01powerpc: add mmc-spi-slot bindingsAnton Vorontsov
The bindings describes a case where MMC/SD/SDIO slot directly connected to a SPI bus. Such setups are widely used on embedded PowerPC boards. The patch also adds the mmc-spi-slot entry to the OpenFirmware modalias table. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <david-b@pacbell.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-21of: of_parse_phandles_with_args() learns to differentiate 'hole' cellsAnton Vorontsov
Given this list (contains three gpio specifiers, one of which is a hole): gpios = <&phandle1 1 2 3 0 /* a hole */ &phandle2 4 5 6>; of_parse_phandles_with_args() would report -ENOENT for the `hole' specifier item, the same error value is used to report the end of the list, for example. Sometimes we want to differentiate holes from real errors -- for example when we want to count all the [syntax correct] specifiers. With this patch of_parse_phandles_with_args() will report -EEXITS when somebody requested to parse a hole. Also, make the out_{node,args} arguments optional, when counting we don't really need the out values. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21of: Minor simplification for the of_parse_phandles_with_args()Anton Vorontsov
By using 'list++' in the beginning we can simplify the code a little bit. Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-19of: Add helpers for finding device nodes which have a given propertyMichael Ellerman
This commit adds a routine for finding a device node which has a certain property. The contents of the property are not taken into account, merely the presence or absence of the property. Based on that routine, we add a for_each_ macro for iterating over all nodes that have a certain property. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-14Merge commit 'gcl/gcl-next'Benjamin Herrenschmidt
2008-10-13of: Add new helper of_parse_phandles_with_args()Anton Vorontsov
The helper is factored out of of_get_gpio(). Will be used by the QE pin multiplexing functions (they need to parse the gpios = <> too). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-10powerpc/of-bindings: Don't support linux,<modalias> "compatible" valuesGrant Likely
Compatible property values in the form linux,<modalias> is not documented anywhere and using it leaks Linux implementation details into the device tree data (which is bad). Remove support for compatible values of this form. If any platforms exist which depended on this code (and I don't know of any), then they can be fixed up by adding legacy translations to the lookup table in this file. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-08OF: add fsl,mcu-mpc8349emitx to the exception listAnton Vorontsov
of/base.c matches on the first (most specific) entries, which isn't quite practical but it was discussed[1] that this won't change. The bindings specifies verbose information for the devices, but it doesn't fit in the I2C ID's 20 characters limit. The limit won't change[2], and the bindings won't change either as they're correct. So we have to put an exception for the MPC8349E-mITX-compatible MCUs. [1] http://www.mail-archive.com/linuxppc-dev@ozlabs.org/msg21196.html [2] http://www.nabble.com/-PATCH-1-2--i2c:-expand-I2C's-id.name-to-23-characters-td19577063.html Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-07-25of: adapt of_find_i2c_driver() to be usable by SPI alsoGrant Likely
SPI has a similar problem as I2C in that it needs to determine an appropriate modalias value for each device node. This patch adapts the of_i2c of_find_i2c_driver() function to be usable by of_spi also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-05-15[POWERPC] Add null pointer check to of_find_propertyTimur Tabi
Update function of_find_property() to return NULL if the device_node passed to it is also NULL. Otherwise, passing NULL will cause a null pointer dereference. Without this, the legacy_serial driver will crash if there's no 'chosen' node in the device tree. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-07[POWERPC] Add of_device_is_available functionJosh Boyer
IEEE 1275 defined a standard "status" property to indicate the operational status of a device. The property has four possible values: okay, disabled, fail, fail-xxx. The absence of this property means the operational status of the device is unknown or okay. This adds a function called of_device_is_available that checks the state of the status property of a device. If the property is absent or set to either "okay" or "ok", it returns 1. Otherwise it returns 0. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-06[POWERPC] Add of_get_next_parent()Michael Ellerman
Iterating through a device node's parents is simple enough, but dealing with the refcounts properly is a little ugly, and replicating that logic is asking for someone to get it wrong or forget it all together, eg: while (dn != NULL) { /* loop body */ tmp = of_get_parent(dn); of_node_put(dn); dn = tmp; } So add of_get_next_parent(), inspired by of_get_next_child(). The contract is that it returns the parent and drops the reference on the current node, this makes the loop look like: while (dn != NULL) { /* loop body */ dn = of_get_next_parent(dn); } Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] Add of_find_matching_node() helper functionGrant Likely
Similar to of_find_compatible_node(), of_find_matching_node() and for_each_matching_node() allow you to iterate over the device tree looking for specific nodes, except that they take of_device_id tables instead of strings. This also moves of_match_node() from driver/of/device.c to driver/of/base.c to colocate it with the of_find_matching_node which depends on it. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-20Consolidate of_find_node_by routinesStephen Rothwell
This consolidates the routines of_find_node_by_path, of_find_node_by_name, of_find_node_by_type and of_find_compatible_device. Again, the comparison of strings are done differently by Sparc and PowerPC and also these add read_locks around the iterations. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Paul Mackerras <paulus@samba.org> Acked-by: David S. Miller <davem@davemloft.net>
2007-07-20Consolidate of_get_next_childStephen Rothwell
This adds a read_lock around the child/next accesses on Sparc. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Paul Mackerras <paulus@samba.org> Acked-by: David S. Miller <davem@davemloft.net>
2007-07-20Consolidate of_get_parentStephen Rothwell
This requires creating dummy of_node_{get,put} routines for sparc and sparc64. It also adds a read_lock around the parent accesses. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Paul Mackerras <paulus@samba.org> Acked-by: David S. Miller <davem@davemloft.net>
2007-07-20Consolidate of_find_propertyStephen Rothwell
The only change here is that a readlock is taken while the property list is being traversed on Sparc where it was not taken previously. Also, Sparc uses strcasecmp to compare property names while PowerPC uses strcmp. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Paul Mackerras <paulus@samba.org> Acked-by: David S. Miller <davem@davemloft.net>
2007-07-20Consolidate of_device_is_compatibleStephen Rothwell
The only difference here is that Sparc uses strncmp to match compatibility names while PowerPC uses strncasecmp. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Paul Mackerras <paulus@samba.org> Acked-by: David S. Miller <davem@davemloft.net>
2007-07-20Start split out of common open firmware codeStephen Rothwell
This creates drivers/of/base.c (depending on CONFIG_OF) and puts the first trivially common bits from the prom.c files into it. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Paul Mackerras <paulus@samba.org> Acked-by: David S. Miller <davem@davemloft.net>