aboutsummaryrefslogtreecommitdiff
path: root/drivers/parport/parport_pc.c
AgeCommit message (Collapse)Author
2008-04-30drivers: replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29parport_pc: wrap PNP probe code in #ifdef CONFIG_PNPBjorn Helgaas
Wrap PNP probe code in #ifdef CONFIG_PNP. We already do the same for CONFIG_PCI. Without this change, we'll have unresolved references to pnp_get_resource() function when CONFIG_PNP=n. (This is a new interface that's not in mainline yet.) Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-04parport_pc: make sure to release IO ports after probing for IT87XXLinus Torvalds
Commit f63fd7e299ee13da071ecfce2b90b58c5e1562b1 ("parport_pc: detection for SuperIO IT87XX POST") only released the IO port region on success, not when the probe for the IT87XX chip failed. That caused not only a reserved region to leak, but also caused an oops when the driver module was unloaded and somebody tried to cat /proc/ioports - because the string that was assigned to the IO port region was a static string in the module virtual address area. Reported-by: Lubos Lunak <l.lunak@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Petr Cvek <petr.cvek@tul.cz> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-13parport: section fixupDavid Brownell
Fix section warning for parport_ECP_supported(); it's called from a routine exported to modules, so it can't be removed with __devinit section pruning. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06parport_pc: detection for SuperIO IT87XX POSTPetr Cvek
Add detection for IT87XX SuperIO chip and disabling its POST feature, which made noise on parallel port's pins. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06parport: add support for the Quatech SPPXP-100 Parallel port PCI ExpressCardLuís P Mendes
Added pci device id for the Quatech SPPXP-100 ExpressCard - 0x278 - to include/linux/pci_id.h Modified drivers/parport/parport_pc.c to support the Quatech SPPXP-100 Parallel port PCI ExpressCard [akpm@linux-foundation.org: build fix] Signed-off-by: Luís P Mendes <luis.p.mendes@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-23[PARPORT] Consolidate code copies into a single generic irq handlerJeff Garzik
Several arches used the exact same code for their parport irq handling. Make that code generic, in parport_irq_handler(). Also, s/__inline__/inline/ in include/linux/parport.h. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-07-31parport_pc locking fixAndrew Morton
http://bugzilla.kernel.org/show_bug.cgi?id=8821 reports a might_sleep() warning due to parport_pc_exit() running platform_device_unregister() while holding ports_lock. Just remove the locking: nobody else can access ports_list during module_exit. Cc: "Mike Sharkey" <mike@pikeaero.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Stas Sergeev <stsp@aknet.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16parport_pc: it887x fixNiels de Vos
The IO port range requested by parport_pc.c:sio_ite_8872_probe is too small. The IO-ports of ttyS1 (0x2f8) will be missconfigured by the ITE-chip. The ITE starts looking for the chip a 0x2a0. An IO-portrange of 32 will not overwrite the ports of ttyS1. Therefore register 0x60 should be written with 0xe5000000, enabling the ITE and setting IO-portsize to 32 bytes. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-16parport_pc needs dma-mapping.hAndrew Morton
alpha: drivers/parport/parport_pc.c: In function 'parport_pc_fifo_write_block_dma': drivers/parport/parport_pc.c:636: warning: implicit declaration of function 'dma_map_single' drivers/parport/parport_pc.c:637: error: 'DMA_TO_DEVICE' undeclared (first use in this function) drivers/parport/parport_pc.c:637: error: (Each undeclared identifier is reported only once drivers/parport/parport_pc.c:637: error: for each function it appears in.) Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08legacy PC parports support parport->devJean Delvare
Give legacy parallel ports a platform device in the device tree. This is a quick and dirty implementation; it doesn't actually convert the legacy parport code to the device driver model (by splitting out probing from device creation). But at least parallel port device drivers will finally have a device to work with. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08parport->dev driver model supportDavid Brownell
Currently a parport_driver can't get a handle on the device node for the underlying parport (PNPACPI, PCI, etc). That prevents correct placement of sysfs child nodes, which can affect things like power management. This patch adds a field to "struct parport" pointing to that device node, and updates non-legacy port drivers to initialize that device pointer. That field replaces the analagous PCI-only support in parport_pc. [akpm@linux-foundation.org: fix powerpc build] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] parport_pc: fix parport_pc_probe_port section warningJean Delvare
WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text between 'parport_pc_probe_port' (at offset 0x14f7) and 'parport_pc_unregister_port' parport_dma_probe() cannot be declared __devinit as it is called from parport_pc_probe_port() which isn't. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-12-07[PATCH] parport: section mismatches with HOTPLUG=nRandy Dunlap
When CONFIG_HOTPLUG=n, parport_pc calls some __devinit == __init code that could be discarded. These calls are made from parport_irq_probe(), which is called from parport_pc_probe_port(), which is an exported symbol, so the calls could (possibly) happen after init time. WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text between 'parport_irq_probe' (at offset 0x31d) and 'parport_pc_probe_port' WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text between 'parport_irq_probe' (at offset 0x346) and 'parport_pc_probe_port' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] parport_pc: Add support for OX16PCI952 parallel portRyan Underwood
Add support for the parallel port (implemented as separate PCI function) on the Oxford Semiconductor OX16PCI952. Signed-off-by: Ryan Underwood <nemesis@icequake.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-03[PATCH] restore parport_pc probing on powermacOlaf Hering
The last change for partport_pc did fix the common case for all PowerMacs, but it broke the case for PCI multiport IO cards. In fact, the config option CONFIG_PARPORT_PC_SUPERIO=y lead to a hard crash when cups probed the parport driver. It enables the winbond and smsc probing. Remove the PARPORT_BASE check again, parport_pc_find_nonpci_ports() will take care of it. All powerpc configs should have CONFIG_PARPORT_PC_SUPERIO=n, the code did not find anything on the chrp boards we tested it on. Tested on a G4/466 with a PCI card: 0001:10:13.0 Serial controller: Timedia Technology Co Ltd PCI2S550 (Dual 16550 UART) (rev 01) (prog-if 02 [16550]) Subsystem: Timedia Technology Co Ltd Unknown device 5079 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 53 Region 0: I/O ports at f2000800 [size=32] Region 2: I/O ports at f2000870 [size=8] Region 3: I/O ports at f2000860 [size=8] Signed-off-by: Olaf Hering <olaf@aepfle.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01[PATCH] update legacy io handling for pmacOlaf Hering
ppc can boot one single binary on prep, chrp and pmac boards. ppc64 can boot one single binary on pseries and G5 boards. pmac has no legacy io, probing for PC style legacy hardware (or accessing the legacy io area regulary) may lead to a hard crash: * add check for parport_pc, exit on pmac. 32bit chrp has no ->check_legacy_ioport, the probe is always called. 64bit chrp has check_legacy_ioport, check for a "parallel" node * add check for isapnp, only PReP boards may have real ISA slots. 32bit PReP will have no ->check_legacy_ioport, the probe is always called. * update code in i8042_platform_init. Run ->check_legacy_ioport first, always call request_region. No functional change. Remove whitespace before i8042_reset init. Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-26remove the bouncing email address of David CampbellAdrian Bunk
This patch removes a bouncing email address from the kernel sources. Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-04-19[PATCH] parport_pc: fix section mismatch warnings (v2)Randy.Dunlap
From: Randy Dunlap <rdunlap@xenotime.net> Fix all modpost section mismatch warnings in parport_pc: WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x230) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x283) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x3e6) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x400) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x463) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x488) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data:superios from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x54c) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x56a) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data: from .text.parport_pc_pci_probe after 'parport_pc_pci_probe' (at offset 0x67) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data: from .text.parport_pc_pci_probe after 'parport_pc_pci_probe' (at offset 0x9f) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data: from .text.parport_pc_pci_probe after 'parport_pc_pci_probe' (at offset 0xa7) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data:cards from .text.parport_pc_pci_probe after 'parport_pc_pci_probe' (at offset 0x132) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data: from .text.parport_pc_pci_probe after 'parport_pc_pci_probe' (at offset 0x142) Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27[PATCH] pnp: parport: adjust pnp_register_driver signatureBjorn Helgaas
Remove the assumption that pnp_register_driver() returns the number of devices claimed. parport_pc_init() does nothing with "count", so remove it. Then nobody uses the return value of parport_pc_find_ports(), so make it void. Finally, update pnp_register_driver() usage. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08[PATCH] parport_pc: arm build fixAndrew Morton
free_dma() isn't implemented on ARM unless HAS_DMA is set. Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] parport: constificationMarko Kohtala
Trivial "const" additions to places in parport that truly are const. Signed-off-by: Marko Kohtala <marko.kohtala@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] parport: fix-up schedule_timeout() usageNishanth Aravamudan
Use schedule_timeout_interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Also use human-time to jiffies units conversion functions rather than direct HZ division to avoid rounding issues. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08[PATCH] PCI: remove pci_find_device from parport_pc.cJiri Slaby
This patch changes pci_find_device to pci_get_device (encapsulated in for_each_pci_dev). Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-07[PATCH] parport: add NetMOS 9805 supportMaximilian Attems
This interface is said to be commonly used in germany: "The patch has been proven to work fine in a beige G3 Mac." http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=262324 Signed-off-by: maximilian attems <janitor@sternwelten.at> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-01[PATCH] PCI: clean up dynamic pci id logicGreg Kroah-Hartman
The dynamic pci id logic has been bothering me for a while, and now that I started to look into how to move some of this to the driver core, I thought it was time to clean it all up. It ends up making the code smaller, and easier to follow, and fixes a few bugs at the same time (dynamic ids were not being matched everywhere, and so could be missed on some call paths for new devices, semaphore not needed to be grabbed when adding a new id and calling the driver core, etc.) I also renamed the function pci_match_device() to pci_match_id() as that's what it really does. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-23[PATCH] parport: NetMos nm9855 fixMartin Schitter
kernel 2.6.12-rc2 adopted some code by Bjorn Helgaas supporting NetMos combo controller cards. this implementation doesn't work for nm9855 based cards! there are two reasons: a) the module 'parport_pc' doesn't want to give the resonsibility for the netmos_9855 to 'parport_serial' and can not handle the serial lines -- trivial to fix... http://lists.infradead.org/pipermail/linux-parport/2005-February/000250.html http://lkml.org/lkml/2005/3/24/199 b) the support for the nm9855 in 'parport_serial' still doesn't work because of wrong assumptions about the relevant BARs port address layout for this chip: 0000:00:09.0 Communication controller: NetMos Technology PCI 9855 Multi-I/O Controller (rev 01) (= 9710:9855) Subsystem: LSI Logic / Symbios Logic 1P4S (= 1000:0014) Flags: medium devsel, IRQ 177 I/O ports at a800 [size=8] (= parport) I/O ports at a400 [size=8] I/O ports at a000 [size=8] (= serial) I/O ports at 9800 [size=8] (= serial) I/O ports at 9400 [size=8] (= serial) I/O ports at 9000 [size=16] (= serial) the following patch will fix the problem. Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-04[PATCH] ISA_DMA Kconfig fixes - part 2 (parport_pc)Al Viro
Part of parport_pc that uses ISA DMA helpers made conditional on CONFIG_ISA_DMA_API. As the result, driver got usable for boxen that do not have ISA DMA stuff and have normal PCI parport card stuck into them - these never use DMA anyway. Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 21:39:33 +0000