aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci/hotplug/shpchp_hpc.c
AgeCommit message (Collapse)Author
2008-10-23PCI hotplug: shpchp: message refinementTaku Izumi
This patch refines messages in shpchp module. The main changes are as follows: - remove the trailing "." - remove __func__ as much as possible - capitalize the first letter of messages - show PCI device address including its domain Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-23PCI hotplug: shpchp: replace printk with dev_printkTaku Izumi
This patch replaces printks within shpchp module with dev_printks. Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-10shpchp: check firmware before taking controlKenji Kaneshige
Fix the following problems of shpchp driver about getting hotplug control from firmware. - The shpchp driver must not control the hotplug controller if it fails to get control from the firmware. But current shpchp controls the hotplug controller regardless the result, because it doesn't check the return value of get_hp_hw_control_from_firmware(). - Current shpchp driver doesn't support _OSC. The pciehp driver already have the code for evaluating _OSC and OSHP and shpchp and pciehp can share it. So this patch move that code from pciehp to acpi_pcihp.c. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-04-20PCI: replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01PCI: Spelling fixesJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07shpchp: delete trailing whitespaceKenji Kaneshige
This patch deletes trailing white space in SHPCHP driver. This has no functional change. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07shpchp: remove DBG_XXX_ROUTINEKenji Kaneshige
This patch removes DBG_ENTER_ROUTINE, DBG_LEAVE_ROUTINE and related code. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-20shpchp: remove unnecessary struct php_ctlrKenji Kaneshige
The struct php_ctlr seems to be only for complicating codes. This patch removes struct php_ctlr and related codes. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18PCI hotplug: ioremap balanced with iounmapAmol Lad
1. ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. 2. Handle return value correctly Tested (compilation only) with: - allmodconfig Signed-off-by: Amol Lad <amol@verismonetworks.com> Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18shpchp: remove unnecessary cmd_busy member from struct controllerKenji Kaneshige
This patch removes unnecessary cmd_busy member from struct controller. Read command status register instead of using cmd_busy. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18shpchp: fix command completion checkKenji Kaneshige
This patch fixes the problem that shpchp driver could mis-detect command failures if the system was under heavy load. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18shpchp: fix shpchp_wait_cmd in pollKenji Kaneshige
This patch fixes the problem that issuing SHPC command in poll mode always fails with the following message. shpchp: Command not completed in 2000 msec Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-07-02[PATCH] irq-flags: pci: Use the new IRQF_ constantsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-19[PATCH] shpchp: Remove Unused hpc_evelnt_lockKenji Kaneshige
This patch removes unused hpc_event_lock. This patch has no functional change. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Kristen Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-19[PATCH] shpchp: Cleanup interrupt polling timerKenji Kaneshige
This patch cleans up the interrupt polling timer code in shpchp_hpc.c. This has no functional changes. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Kristen Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-19[PATCH] shpchp: Cleanup SHPC commandsKenji Kaneshige
This patch cleans up the code related to issuing SHPC commands. This patch has no functional changes. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Kristen Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-19[PATCH] shpchp: Cleanup interrupt handlerKenji Kaneshige
This patch cleans up the interrupt handler of shpchp driver. This patch has no functional changes. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Kristen Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-19[PATCH] shpchp: Remove unnecessary hpc_ctlr_handle checkKenji Kaneshige
This patch removes unnecessary error check for hpc_ctlr_handle. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Kristen Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-19[PATCH] shpchp: Create shpchpd at controller probe timeKenji Kaneshige
The workqueue thread of shpchp driver should be created only when SHPC based hotplug slots are detected on the system. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Kristen Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-19[PATCH] shpchp: Mask Global SERR and Intr at controller release timeKenji Kaneshige
Global SERR and Interrupt should be masked at shpchp driver unload time. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Kristen Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-19[PATCH] SHPC: Fix SHPC Contoller SERR-INT Register bits accessKenji Kaneshige
Current SHPCHP driver doesn't take care of RsvdP/RsvdZ[*] bits in controller SERR-INT register. This might cause unpredicable results. This patch fixes this bug. [*] RsvdP and RsvdZ are defined in SHPC spec as follows: RsvdP - Reserved and Preserved. Register bits of this type are reserved for future use as R/W bits. The value read is undefined. Writes are ignored. Software must follow These rules when accessing RsvdP bits: - Software must ignore RsvdP bits when testing values read from these registers. - Software must not depend on RsvdP bit's ability to retain information when written - Software must always write back the value read in the RsvdP bits when writing one of these registers. RsvdZ - Reserved and Zero. Register bits of this type are reserved for future use as R/WC bits. The value read is undefined. Writes are ignored. Software must follow these rules when accessing RsvdZ bits: - Software must ignore RsvdZ bits when testing values read from these registers. - Software must not depends on a RsvdZ bit's ability to retain information when written. - Software must always write 0 to RsvdZ bits when writing one of these register. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Kristen Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-19[PATCH] SHPC: Fix SHPC Logical Slot Register bits accessKenji Kaneshige
Current SHPCHP driver doesn't take care of RsvdP/RsvdZ[*] bits in logical slot registers. This might cause unpredicable results. This patch fixes this bug. [*] RsvdP and RsvdZ are defined in SHPC spec as follows: RsvdP - Reserved and Preserved. Register bits of this type are reserved for future use as R/W bits. The value read is undefined. Writes are ignored. Software must follow These rules when accessing RsvdP bits: - Software must ignore RsvdP bits when testing values read from these registers. - Software must not depend on RsvdP bit's ability to retain information when written - Software must always write back the value read in the RsvdP bits when writing one of these registers. RsvdZ - Reserved and Zero. Register bits of this type are reserved for future use as R/WC bits. The value read is undefined. Writes are ignored. Software must follow these rules when accessing RsvdZ bits: - Software must ignore RsvdZ bits when testing values read from these registers. - Software must not depends on a RsvdZ bit's ability to retain information when written. - Software must always write 0 to RsvdZ bits when writing one of these register. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Kristen Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-19[PATCH] SHPC: Cleanup SHPC Logical Slot Register bits accessKenji Kaneshige
This patch cleans up the code to access bits in slot logical registers. This patch has no functional change. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Kristen Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-19[PATCH] SHPC: Cleanup SHPC Logical Slot Register accessKenji Kaneshige
This patch cleans up the code to access slot logical registers. This patch has no functional changes. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Kristen Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-19[PATCH] SHPC: Cleanup SHPC register accessKenji Kaneshige
This patch cleans up the code to access SHPC working register sets. This patch has no functional changes. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Kristen Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] shpchp: cleanup bus speed handlingKenji Kaneshige
The code related to handling bus speed in SHPCHP driver is unnecessarily complex. This patch cleans up and simplify that. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] shpchp: event handling reworkKenji Kaneshige
The event handler of SHPCHP driver is unnecessarily very complex. In addition, current event handler can only a fixed number of events at the same time, and some of events would be lost if several number of events happened at the same time. This patch simplify the event handler by using 'work queue', and it also fix the above-mentioned issue. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] shpchp - Fix incorrect return value of interrupt handlerKenji Kaneshige
Current SHPCHP driver has a bug in its interrupt handler which cause "IRQ #: nobody cared" oops. This problem can be reproduced easily by the following operation. # cd /sys/bus/pci/slots/<slot#> # while true; do echo 1 > attention ; done & The reason is that when command complete interrupt is raised, current SHPCHP driver's interrupt handler returns IRQ_NONE regardless of if the interrupt is handled or not. This patch fixes this issue. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] shpchp - replace kmalloc() with kzalloc() and cleanup arg of sizeof()Kenji Kaneshige
This patch replaces kmalloc() and memset() pair with kzalloc() and cleans up the arg of sizeof() in SHPCHP driver. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] shpchp - cleanup check command statusKenji Kaneshige
This patch cleanups codes that check the command status. For this, it introduces a new semaphore "cmd_sem" for each controller. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] PCI hotplug: convert semaphores to mutexIngo Molnar
semaphore to mutex conversion. the conversion was generated via scripts, and the result was validated automatically via a script as well. build tested with allyesconfig. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] shpchp: fix improper wait for command completionKenji Kaneshige
Current SHPCHP driver uses msleep_interruptible() function to wait for a command completion event. But I think this would cause an unnecessary long wait until timeout, if command completion interrupt came before task state was changed to TASK_INTERRUPTIBLE. This patch fixes this issue. With this patch, command completion becomes faster as follows: o Without this patch # time echo 1 > power real 0m4.708s user 0m0.000s sys 0m0.524s o With this patch # time echo 1 > power real 0m2.221s user 0m0.000s sys 0m0.532s Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] shpchp: fix improper write to Command Completion Detect bitKenji Kaneshige
Current SHPCHP driver writes a '0' to the Command Completion Detect bit to clear the Command Complete Interrupt Pending. But according to the SHPC spec (See 4.7.3.1 System Interrupts), SHPCHP driver must write '1'. This patch fixes this bug. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] shpchp: fix improper mmio mappingKenji Kaneshige
Current SHPCHP driver seems not to map MMIO region properly. This patch fixes this bug. This patch also cleanup the code. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] shpchp: fix improper reference to Mode 1 ECC Capability" bitKenji Kaneshige
The hpc_get_mode1_ECC_cap() function of SHPCHP driver seems to refer the wrong bit for refering the "Mode 1 ECC Capability" bit. This bug seems not to cause any problem so far. But I think this should be fixed. This patch fixes this bug. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09[PATCH] shpchp: fix improper reference to Slot Avail RegsisterKenji Kaneshige
The hpc_get_max_bus_speed() function of the SHPCHP driver seems to refer wrong bits in the "Slot Avail Register I" and "Slot Avail Register II". This patch fixes this bug. And this also cleanup the code. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-13[PATCH] shpchp_hpc build fixAndrew Morton
Missing include. Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28[PATCH] shpchp: reduce debug message verbosityrajesh.shah@intel.com
Reduce the number of debug messages generated if shpchp debug is enabled. I tried to restrict this to removing debug messages that are either early-driver-debug type messages, or print information that can be inferred through other debug prints. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] shpchp: miscellaneous cleanupsrajesh.shah@intel.com
Remove un-necessary header includes, remove dead code, remove some type casts, receive function return in the correct data type... Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] shpchp: reduce dependence on ACPIrajesh.shah@intel.com
Reduce the SHPC hotplug driver's dependence on ACPI. We don't walk the acpi namespace anymore to build a list of bridges and devices. The remaining interaction with ACPI is to run the _OSHP method to transition control of hotplug hardware from system BIOS to the shpc hotplug driver, and to run the _HPP method to get hotplug device parameters like cache line size, latency timer and SERR/PERR enable from BIOS. Note that one of the side effects of this patch is that shpchp does not enable the hot-added device or its DMA bus mastering automatically now. It expects the device driver to do that. This may break some drivers and we will have to fix them as they are reported. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-16[PATCH] PCI Hotplug: new contact infoKristen Accardi
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!