aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci/hotplug
AgeCommit message (Collapse)Author
2007-02-02Altix: Add ACPI SSDT PCI device support (hotplug)John Keller
Support for dynamic loading and unloading of ACPI SSDT tables upon slot hotplugs and unplugs. On SN platforms, we now represent every populated root bus slot with a single ACPI SSDT table containing info for every device and PPB attached to the slot. These SSDTs are generated by the prom at initial boot and hotplug time. The info in these SSDT tables is used by the SN kernel IO "fixup" code (which is called at boot and hotplug time). On hotplugs (i.e. enable_slot()), if running with an ACPI capable prom, attempt to obtain a new ACPI SSDT table for the slot being hotplugged. If successful, add the table to the ACPI namespace (acpi_load_table()) and then walk the new devices and add them to the ACPI infrastructure (acpi_bus_add()). On hot unplugs (i.e. disable_slot()), if running with an ACPI capable prom, attempt to remove the SSDT table associated with the slot from the ACPI namespace (acpi_unload_table_id()) and infastructure (acpi_bus_trim()). From: John Keller <jpk@sgi.com> A bug was fixed where the sgi hotplug driver was removing the slot's SSDT table from the ACPI namespace a bit too early in disable_slot(). Also, we now call acpi_bus_start() subsequent to acpi_bus_add(). Signed-off-by: Aaron Young <ayoung@sgi.com> Cc: Greg KH <greg@kroah.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown<len.brown@intel.com>
2007-02-02ACPICA: Remove duplicate table definitions (non-conflicting), contAlexey Starikovskiy
Signed-off-by: Len Brown <len.brown@intel.com>
2006-12-22Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (68 commits) ACPI: replace kmalloc+memset with kzalloc ACPI: Add support for acpi_load_table/acpi_unload_table_id fbdev: update after backlight argument change ACPI: video: Add dev argument for backlight_device_register ACPI: Implement acpi_video_get_next_level() ACPI: Kconfig - depend on PM rather than selecting it ACPI: fix NULL check in drivers/acpi/osl.c ACPI: make drivers/acpi/ec.c:ec_ecdt static ACPI: prevent processor module from loading on failures ACPI: fix single linked list manipulation ACPI: ibm_acpi: allow clean removal ACPI: fix git automerge failure ACPI: ibm_acpi: respond to workqueue update ACPI: dock: add uevent to indicate change in device status ACPI: ec: Lindent once again ACPI: ec: Change #define to enums there possible. ACPI: ec: Style changes. ACPI: ec: Acquire Global Lock under EC mutex. ACPI: ec: Drop udelay() from poll mode. Loop by reading status field instead. ACPI: ec: Rename gpe_bit to gpe ...
2006-12-20ACPI: replace kmalloc+memset with kzallocBurman Yan
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2006-12-20acpiphp: Link-time error for PCI HotplugKristen Carlson Accardi
I'm seeing: `acpiphp_glue_exit' referenced in section `.init.text' of drivers/built-in.o: defined in discarded section `.exit.text' of drivers/built-in.o when trying to compile an IA64 kernel with PCI hotplug enabled. I suggest this patch: Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-20shpchp: cleanup shpchp.hKenji Kaneshige
This patch cleans up shpchp.h. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-20shpchp: remove shpchprm_get_physical_slot_numberKenji Kaneshige
This patch removes unnecessary shpchprm_get_physical_slot_number() function. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-20shpchp: cleanup struct controllerKenji Kaneshige
This patch removes unused/unnecessary members from struct controller. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-20shpchp: remove unnecessary struct php_ctlrKenji Kaneshige
The struct php_ctlr seems to be only for complicating codes. This patch removes struct php_ctlr and related codes. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-20rpaphp: compiler warning cleanupLinas Vepstas
This janitorial patch removes the following annoying compile-time message: drivers/pci/hotplug/rpaphp_slot.c:57: warning: ignoring return value of sfs_create_file declared with attribute warn_unused_result It also fixes a typo, removes some misc crud. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: John Rose <johnrose@us.ibm.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-13[PATCH] getting rid of all casts of k[cmz]alloc() callsRobert P. J. Day
Run this: #!/bin/sh for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do echo "De-casting $f..." perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f done And then go through and reinstate those cases where code is casting pointers to non-pointers. And then drop a few hunks which conflicted with outstanding work. Cc: Russell King <rmk@arm.linux.org.uk>, Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Greg KH <greg@kroah.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Karsten Keil <kkeil@suse.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Ian Kent <raven@themaw.net> Cc: Steven French <sfrench@us.ibm.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10[PATCH] Kconfig refactoring for better menu nestingDon Mullis
Refactor Kconfig content to maximize nesting of menus by menuconfig and xconfig. Tested by simultaneously running `make xconfig` with and without patch, and comparing displays. Signed-off-by: Don Mullis <dwm@meer.net> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-05Merge branch 'master' of ↵David Howells
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/infiniband/core/iwcm.c drivers/net/chelsio/cxgb2.c drivers/net/wireless/bcm43xx/bcm43xx_main.c drivers/net/wireless/prism54/islpci_eth.c drivers/usb/core/hub.h drivers/usb/input/hid-core.c net/core/netpoll.c Fix up merge failures with Linus's head and fix new compilation failures. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-01Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (28 commits) PCI: make arch/i386/pci/common.c:pci_bf_sort static PCI: ibmphp_pci.c: fix NULL dereference pciehp: remove unnecessary pci_disable_msi pciehp: remove unnecessary free_irq PCI: rpaphp: change device tree examination PCI: Change memory allocation for acpiphp slots i2c-i801: SMBus patch for Intel ICH9 PCI: irq: irq and pci_ids patch for Intel ICH9 PCI: pci_{enable,disable}_device() nestable ports PCI: switch pci_{enable,disable}_device() to be nestable PCI: arch/i386/kernel/pci-dma.c: ioremap balanced with iounmap pci/i386: style cleanups PCI: Block on access to temporarily unavailable pci device pci: fix __pci_register_driver error handling pci: clear osc support flags if no _OSC method acpiphp: fix missing acpiphp_glue_exit() acpiphp: fix use of list_for_each macro Altix: Initial ACPI support - ROM shadowing. Altix: SN ACPI hotplug support. Altix: Add initial ACPI IO support ...
2006-12-01PCI: ibmphp_pci.c: fix NULL dereferenceAdrian Bunk
The correct order is: NULL check before dereference Spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01pciehp: remove unnecessary pci_disable_msiKenji Kaneshige
This patch fixes the problem that "irq XX: nobody cared" kernel oops is reported when pciehp is once rmmoded and insmoded again. The cause of this problem is pciehp driver calls pci_disable_msi() at controller release time, even though it must be done by PCI Express Port Bus driver. This patch removes unnecessary pci_disable_msi() call from pciehp driver. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01pciehp: remove unnecessary free_irqKenji Kaneshige
This patch fixes the problem that the following error messages is reported when pciehp driver is rmmoded. Trying to free already-free IRQ XX The cause of this problem is that pciehp driver is doing unknown 2nd free_irq at driver unloading. This patch removes this unknown 2nd free_irq call. Note: The pciehp driver should be adapted to standard device driver mode. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01PCI: rpaphp: change device tree examinationJohn Rose
Change the criterion that RPA PCI Hotplug and RPA DLPAR use when determining the hotplug capabilities of a given device node. The "device_type" property is less consistent than "name" across PCI nodes on newer hardware. Signed-off-by: John Rose <johnrose@austin.ibm.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01PCI: Change memory allocation for acpiphp slotsRolf Eike Beer
Change memory allocation for acpiphp slots Change the "struct slot" that acpiphp uses for managing it's slots to directly contain the memory for the needed struct hotplug_slot_info and the slot's name. This way we need only two memory allocations per slot instead of four. While we are at it: make_slot_name() is just a wrapper around snprintf() knowing the right arguments to call it. Since the function makes just one function call and is only called from one place I inlined it by hand. Finally this fixes a possible bug waiting for someone to hit it. There were two unused local variables in acpiphp_register_hotplug_slot(). gcc did not find them because they were used in memory allocations with sizeof(*var). They had the same types as the target of the allocation, but nevertheless this was just weird. Signed-off-by: Rolf Eike Beer <eike-hotplug@sf-tec.de> Acked-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01acpiphp: fix missing acpiphp_glue_exit()Akinobu Mita
acpiphp_glue_exit() needs to be called to unwind when no slots found. (It fixes data corruption when reloading acpiphp driver with no such devices) Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01acpiphp: fix use of list_for_each macroAkinobu Mita
This patch fixes invalid usage of list_for_each() list_for_each (node, &bridge_list) { bridge = (struct acpiphp_bridge *)node; ... } This code works while the member of list node is located at the head of struct acpiphp_bridge. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01Altix: SN ACPI hotplug support.John Keller
A few minor changes to the way slot/device fixup is done. No need to be calling sn_pci_controller_fixup(), as a root bus cannot be hotplugged. Signed-off-by: John Keller <jpk@sgi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-30Fix misc .c/.h comment typosMatt LaPlante
Fix various .c/.h typos in comments (no code changes). Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-22WorkStruct: make allyesconfigDavid Howells
Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-10-27acpiphp: fix latch statusMUNEDA Takahiro
pci_hotplug.h says: * @latch_status: if the latch (if any) is open or closed (1/0) However, acpiphp returns opposite value. This patch fixes this issue. I tested this patch on my ia64 machine that has some apciphp based hotplug slots. Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-20[PATCH] Fix up rpaphp driver for pci hotplug header moveOlaf Hering
Use grep instead of make during interface changes. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-18PCI Hotplug: move pci_hotplug.h to include/linux/Greg Kroah-Hartman
This makes it possible to build pci hotplug drivers outside of the main kernel tree, and Sam keeps telling me to move local header files to their proper places... Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18change pci hotplug subsystem maintainer to KristenKristen Carlson Accardi
Here's a patch adding me to the maintainers file for the pci hotplug subsystem, as we discussed. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18cpcihp_generic: prevent loading without "bridge" parameterAkinobu Mita
cpcihp_generic module requires configured "bridge" module parameter. But it can be loaded successfully without that parameter. Because module init call ends up returning positive value. This patch prevents from loading without setting "bridge" module parameter. Signed-off-by: Akinbou Mita <akinobu.mita@gmail.com> Signed-off-by: Scott Murray <scottm@somanetworks.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18PCI hotplug: ioremap balanced with iounmapAmol Lad
1. ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. 2. Handle return value correctly Tested (compilation only) with: - allmodconfig Signed-off-by: Amol Lad <amol@verismonetworks.com> Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18shpchp: remove unnecessary cmd_busy member from struct controllerKenji Kaneshige
This patch removes unnecessary cmd_busy member from struct controller. Read command status register instead of using cmd_busy. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18shpchp: fix command completion checkKenji Kaneshige
This patch fixes the problem that shpchp driver could mis-detect command failures if the system was under heavy load. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18pci: Stamp out pci_find_* usage in fakephpAlan Cox
pci_find is not hotplug safe, so it really doesn't want to be in an actual hotplug driver either. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18pciehp: Remove unnecessary check in pciehp_ctrl.cEric Sesterhenn
this was spotted by coverity (cid #819). We dereference p_slot earlier in the function, and i found no way it could become NULL anywhere. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18pciehp - add missing lockingKenji Kaneshige
This patch fixes the problem that system will panic if multiple power on/off operations are issued to the same slot in parallel. This problem can be easily reproduced by commands below. # while true; do echo 1 > power; echo 0 > power; done & # while true; do echo 1 > power; echo 0 > power; done & The cause is lack of locking for enable/disable operations. This patch fixes this problem. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18pciehp: fix improper info messagesKenji Kaneshige
The slot number displayed in info messages would cause a confusion because those are displayed in several ways (decimal and hex). Furthermore, those slot number is not same as slot name (directory name). This patch fixes those improper info messages. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18shpchp: fix shpchp_wait_cmd in pollKenji Kaneshige
This patch fixes the problem that issuing SHPC command in poll mode always fails with the following message. shpchp: Command not completed in 2000 msec Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-03Still more typo fixesMatt LaPlante
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-09-27[PATCH] inode_diet: Replace inode.u.generic_ip with inode.i_privateTheodore Ts'o
The following patches reduce the size of the VFS inode structure by 28 bytes on a UP x86. (It would be more on an x86_64 system). This is a 10% reduction in the inode size on a UP kernel that is configured in a production mode (i.e., with no spinlock or other debugging functions enabled; if you want to save memory taken up by in-core inodes, the first thing you should do is disable the debugging options; they are responsible for a huge amount of bloat in the VFS inode structure). This patch: The filesystem or device-specific pointer in the inode is inside a union, which is pretty pointless given that all 30+ users of this field have been using the void pointer. Get rid of the union and rename it to i_private, with a comment to explain who is allowed to use the void pointer. This is just a cleanup, but it allows us to reuse the union 'u' for something something where the union will actually be used. [judith@osdl.org: powerpc build fix] Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Judith Lebzelter <judith@osdl.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26pciehp - fix wrong return valueKenji Kaneshige
This patch fixes the problem that trying to enable already enabled slot disables the slot by returning the proper value from pciehp_enable_slot()/pciehp_disable_slot(). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26acpiphp: add support for ioapic hot-removeSatoru Takeuchi
This patch adds support for ioapics hot-remove. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26acpiphp: disable bridgesSatoru Takeuchi
Currently acpiphp calls pci_enable_device() against all hot-added bridges, but acpiphp does not call pci_disable_device() against them in hot-remove. So ioapic hot-remove would fail. This patch fixes this issue. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26acpiphp: stop bus device before acpi_bus_trimSatoru Takeuchi
Contrary to PCI bridge hot-add, we need to follow the sequence below for PCI bridge hot-removal. (1) Stop devices (detach drivers, remove from the global list, etc.) (2) Unbind ACPI node from the devices (remove the _PRT entries) (3) Remove devices (remove from the device list, etc.) This patch fixes acpiphp driver to follow above sequence for P2P bridge hot-removal. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26acpiphp: do not initialize existing ioapicsSatoru Takeuchi
Currently acpiphp initializes all ioapics under the bus on which hot-add event occured. It also initializes already working ioapics. This patch fixes this bug. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26acpiphp: initialize ioapics before starting devicesSatoru Takeuchi
Currently acpiphp initializes ioapics after starting devices, but ioapics should be initialized before starting devices. This patch fixes this bug. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26acpiphp: set hpp values before starting devicesSatoru Takeuchi
Currently acpiphp sets hpp values after starting devices, but the values should be set before starting devices. This patch fixes this bug. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26PCI Hotplug: cleanup pcihp skeleton code.Satoru Takeuchi
Cleanup pcihp skeleton code. Fix some typos and remove some unnecessary blank lines. Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26PCI: drivers/pci/hotplug/acpiphp_glue.c: make a function staticAdrian Bunk
Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26PCI: fix __must_check warningsGreg Kroah-Hartman
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>