aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci/pci-sysfs.c
AgeCommit message (Collapse)Author
2009-04-22docbooks: add/fix PCI kernel-docRandy Dunlap
Add drivers/pci/*.c source files to DocBook/kernel-api.tmpl and update those pci/*.c source files that need kernel-doc fixes. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-06PCI: allow PCI core hotplug to remove PCI root busAlex Chiang
There is no reason to prevent removal of root bus devices. A subsequent rescan will find them just fine. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-06PCI: Setup disabled bridges even if buses are addedYuji Shimada
This patch sets up disabled bridges even if buses have already been added. pci_assign_unassigned_resources is called after buses are added. pci_assign_unassigned_resources calls pci_bus_assign_resources. pci_bus_assign_resources calls pci_setup_bridge to configure BARs of bridges. Currently pci_setup_bridge returns immediately if the bus have already been added. So pci_assign_unassigned_resources can't configure BARs of bridges that were added in a disabled state; this patch fixes the issue. On logical hot-add, we need to prevent the kernel from re-initializing bridges that have already been initialized. To achieve this, pci_setup_bridge returns immediately if the bridge have already been enabled. We don't need to check whether the specified bus is a root bus or not. pci_setup_bridge is not called on a root bus, because a root bus does not have a bridge. The patch adds a new helper function, pci_is_enabled. I made the function name similar to pci_is_managed. The codes which use enable_cnt directly are changed to use pci_is_enabled. Acked-by: Alex Chiang <achiang@hp.com> Signed-off-by: Yuji Shimada <shimada-yxb@necst.nec.co.jp> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20PCI: Introduce /sys/bus/pci/devices/.../rescanAlex Chiang
This interface allows the user to force a rescan of the device's parent bus and all subordinate buses, and rediscover devices removed earlier from this part of the device tree. Cc: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20PCI: Introduce /sys/bus/pci/devices/.../removeAlex Chiang
This patch adds an attribute named "remove" to a PCI device's sysfs directory. Writing a non-zero value to this attribute will remove the PCI device and any children of it. Trent Piepho wrote the original implementation and documentation. Thanks to Vegard Nossum for testing under kmemcheck and finding locking issues with the sysfs interface. Cc: Trent Piepho <xyzzy@speakeasy.org> Tested-by: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20PCI: Introduce /sys/bus/pci/rescanAlex Chiang
This interface allows the user to force a rescan of all PCI buses in system, and rediscover devices that have been removed earlier. pci_bus_attrs implementation from Trent Piepho. Thanks to Vegard Nossum for discovering locking issues with the sysfs interface. Cc: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20PCI: expose boot VGA device via sysfs.Dave Airlie
X really would like to know which VGA device was considered the boot device by the system. The x86 PCI fixups have support for discovering this but we provide no way to expose it to userspace. This adds a sysfs file per VGA class device which has the value 0 for non the boot device or unknown, and 1 if the VGA device is the boot device. Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-19PCI/alpha: pci sysfs resourcesIvan Kokshaysky
This closes http://bugzilla.kernel.org/show_bug.cgi?id=10893 which is a showstopper for X development on alpha. The generic HAVE_PCI_MMAP code (drivers/pci-sysfs.c) is not very useful since we have to deal with three different types of MMIO address spaces: sparse and dense mappings for old ev4/ev5 machines and "normal" 1:1 MMIO space (bwx) for ev56 and later. Also "write combine" mappings are meaningless on alpha - roughly speaking, alpha does write combining, IO reordering and other optimizations by default, unless user splits IO accesses with memory barriers. I think the cleanest way to deal with resource files on alpha is to convert the default no-op pci_create_resource_files() and pci_remove_resource_files() for !HAVE_PCI_MMAP case into __weak functions and override them with alpha specific ones. Another alpha hook is needed for "legacy_" resource files to handle sparse addressing (pci_adjust_legacy_attr). With the "standard" resourceN files on ev56/ev6 libpciaccess works "out of the box". Handling of resourceN_sparse/resourceN_dense files on older machines obviously requires some userland work. Sparse/dense stuff has been tested on sx164 (pca56/pyxis, normally uses bwx IO) with the kernel hacked into "cia compatible" mode. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-02-04PCI: return error on failure to read PCI ROMsTimothy S. Nelson
This patch makes the ROM reading code return an error to user space if the size of the ROM read is equal to 0. The patch also emits a warnings if the contents of the ROM are invalid, and documents the effects of the "enable" file on ROM reading. Signed-off-by: Timothy S. Nelson <wayland@wayland.id.au> Acked-by: Alex Villacis-Lasso <a_villacis@palosanto.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-10Merge branch 'cpus4096-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'cpus4096-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: [IA64] fix typo in cpumask_of_pcibus() x86: fix x86_32 builds for summit and es7000 arch's cpumask: use work_on_cpu in acpi-cpufreq.c for read_measured_perf_ctrs cpumask: use work_on_cpu in acpi-cpufreq.c for drv_read and drv_write cpumask: use cpumask_var_t in acpi-cpufreq.c cpumask: use work_on_cpu in acpi/cstate.c cpumask: convert struct cpufreq_policy to cpumask_var_t cpumask: replace CPUMASK_ALLOC etc with cpumask_var_t x86: cleanup remaining cpumask_t ops in smpboot code cpumask: update pci_bus_show_cpuaffinity to use new cpumask API cpumask: update local_cpus_show to use new cpumask API ia64: cpumask fix for is_affinity_mask_valid()
2009-01-07PCI: revise VPD access interfaceStephen Hemminger
Change PCI VPD API which was only used by sysfs to something usable in drivers. * move iteration over multiple words to the low level * use conventional types for arguments * add exportable wrapper Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07PCI: define PCI resource names in an 'enum'Yu Zhao
This patch moves all definitions of the PCI resource names to an 'enum', and also replaces some hard-coded resource variables with symbol names. This change eases introduction of device specific resources. Reviewed-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07PCI: Make settable sysfs attributes more consistentTrent Piepho
PCI devices have three settable boolean attributes, enable, broken_parity_status, and msi_bus. The store functions for these would silently interpret "0x01" as false, "1llogical" as true, and "true" would be (silently!) ignored and do nothing. This is inconsistent with typical sysfs handling of settable attributes, and just plain doesn't make much sense. So, use strict_strtoul(), which was created for this purpose. The store functions will treat a value of 0 as false, non-zero as true, and return -EINVAL for a parse failure. Additionally, is_enabled_store() and msi_bus_store() return -EPERM if CAP_SYS_ADMIN is lacking, rather than silently doing nothing. This is more typical behavior for sysfs attributes that need a capability. And msi_bus_store() will only print the "forced subordinate bus ..." warning if the MSI flag was actually forced to a different value. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07resource: allow MMIO exclusivity for device driversArjan van de Ven
Device drivers that use pci_request_regions() (and similar APIs) have a reasonable expectation that they are the only ones accessing their device. As part of the e1000e hunt, we were afraid that some userland (X or some bootsplash stuff) was mapping the MMIO region that the driver thought it had exclusively via /dev/mem or via various sysfs resource mappings. This patch adds the option for device drivers to cause their reserved regions to the "banned from /dev/mem use" list, so now both kernel memory and device-exclusive MMIO regions are banned. NOTE: This is only active when CONFIG_STRICT_DEVMEM is set. In addition to the config option, a kernel parameter iomem=relaxed is provided for the cases where developers want to diagnose, in the field, drivers issues from userspace. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07PCI: check mmap range of /proc/bus/pci files tooJesse Barnes
/proc/bus/pci allows you to mmap resource ranges too, so we should probably be checking to make sure the mapping is somewhat valid. Uses the same code as the recent sysfs mmap range checking patch from Linus. Acked-by: David Miller <davem@davemloft.net> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-04cpumask: update local_cpus_show to use new cpumask APIMike Travis
Impact: use new cpumask API to reduce stack usage Replace the local cpumask_t variable with a pointer to the const cpumask that needs to be printed. Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-13cpumask: change cpumask_scnprintf, cpumask_parse_user, cpulist_parse, and ↵Rusty Russell
cpulist_scnprintf to take pointers. Impact: change calling convention of existing cpumask APIs Most cpumask functions started with cpus_: these have been replaced by cpumask_ ones which take struct cpumask pointers as expected. These four functions don't have good replacement names; fortunately they're rarely used, so we just change them over. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: paulus@samba.org Cc: mingo@redhat.com Cc: tony.luck@intel.com Cc: ralf@linux-mips.org Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: cl@linux-foundation.org Cc: srostedt@redhat.com
2008-11-03PCI: fix range check on mmapped sysfs resource filesEd Swierk
pci_mmap_fits() returns the wrong answer if the sysfs resource file size is not a multiple of the page size. vm_end and vm_start are already page-aligned, so size - start < nr, causing mmap() to return EINVAL. Signed-off-by: Ed Swierk <eswierk@aristanetworks.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20PCI: Add ability to mmap legacy_io on some platformsBenjamin Herrenschmidt
This adds the ability to mmap legacy IO space to the legacy_io files in sysfs on platforms that support it. This will allow to clean up X to use this instead of /dev/mem for legacy IO accesses such as those performed by Int10. While at it I moved pci_create/remove_legacy_files() to pci-sysfs.c where I think they belong, thus making more things statis in there and cleaned up some spurrious prototypes in the ia64 pci.h file Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20PCI: centralize the capabilities code in pci-sysfs.cZhao, Yu
This patch centralizes functions used to add and remove sysfs entries for various capabilities. With this cleanup, the code is more readable and easier for adding new capability related functions. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20PCI: replace cfg space size (256/4096) by macros.Zhao, Yu
This is a cleanup that changes all PCI configuration space size representations to the macros (PCI_CFG_SPACE_SIZE and PCI_CFG_SPACE_EXP_SIZE). And the macros are also moved from drivers/pci/probe.c to drivers/pci/pci.h. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-02Check mapped ranges on sysfs resource filesLinus Torvalds
This is loosely based on a patch by Jesse Barnes to check the user-space PCI mappings though the sysfs interfaces. Quoting Jesse's original explanation: It's fairly common for applications to map PCI resources through sysfs. However, with the current implementation, it's possible for an application to map far more than the range corresponding to the resourceN file it opened. This patch plugs that hole by checking the range at mmap time, similar to what is done on platforms like sparc64 in their lower level PCI remapping routines. It was initially put together to help debug the e1000e NVRAM corruption problem, since we initially thought an X driver might be walking past the end of one of its mappings and clobbering the NVRAM. It now looks like that's not the case, but doing the check is still important for obvious reasons. and this version of the patch differs in that it uses a helper function to clarify the code, and does all the checks in pages (instead of bytes) in order to avoid overflows when doing "<< PAGE_SHIFT" etc. Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-02PCI: Limit VPD read/write lengths for Broadcom 5706, 5708, 5709 rev.Benjamin Li
For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the VPD end tag will hang the device. This problem was initially observed when a vpd entry was created in sysfs ('/sys/bus/pci/devices/<id>/vpd'). A read to this sysfs entry will dump 32k of data. Reading a full 32k will cause an access beyond the VPD end tag causing the device to hang. Once the device is hung, the bnx2 driver will not be able to reset the device. We believe that it is legal to read beyond the end tag and therefore the solution is to limit the read/write length. A majority of this patch is from Matthew Wilcox who gave code for reworking the PCI vpd size information. A PCI quirk added for the Broadcom NIC's to limit the read/write's. Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-01PCI: Restrict VPD read permission to rootBen Hutchings
Some PCI devices will lock up if we attempt to read from VPD addresses beyond some device-dependent limit. Until we can identify these devices and adjust the file size accordingly, only let root read VPD through sysfs to prevent a DoS by normal users. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-12PCI: fixup write combine comment in pci_mmap_resourceJesse Barnes
Now that we can actually do write combining properly, there's no need to have the FIXME. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-12x86: PAT export resource_wc in pci sysfsvenkatesh.pallipadi@intel.com
For the ranges with IORESOURCE_PREFETCH, export a new resource_wc interface in pci /sysfs along with resource (which is uncached). Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6: (42 commits) PCI: Change PCI subsystem MAINTAINER PCI: pci-iommu-iotlb-flushing-speedup PCI: pci_setup_bridge() mustn't be __devinit PCI: pci_bus_size_cardbus() mustn't be __devinit PCI: pci_scan_device() mustn't be __devinit PCI: pci_alloc_child_bus() mustn't be __devinit PCI: replace remaining __FUNCTION__ occurrences PCI: Hotplug: fakephp: Return success, not ENODEV, when bus rescan is triggered PCI: Hotplug: Fix leaks in IBM Hot Plug Controller Driver - ibmphp_init_devno() PCI: clean up resource alignment management PCI: aerdrv_acpi.c: remove unneeded NULL check PCI: Update VIA CX700 quirk PCI: Expose PCI VPD through sysfs PCI: iommu: iotlb flushing PCI: simplify quirk debug output PCI: iova RB tree setup tweak PCI: parisc: use generic pci_enable_resources() PCI: ppc: use generic pci_enable_resources() PCI: powerpc: use generic pci_enable_resources() PCI: ia64: use generic pci_enable_resources() ...
2008-04-20PCI: Expose PCI VPD through sysfsBen Hutchings
Vital Product Data (VPD) may be exposed by PCI devices in several ways. It is generally unsafe to read this information through the existing interfaces to user-land because of stateful interfaces. This adds: - abstract operations for VPD access (struct pci_vpd_ops) - VPD state information in struct pci_dev (struct pci_vpd) - an implementation of the VPD access method specified in PCI 2.2 (in access.c) - a 'vpd' binary file in sysfs directories for PCI devices with VPD operations defined It adds a probe for PCI 2.2 VPD in pci_scan_device() and release of VPD state in pci_release_dev(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: add PCI Express ASPM supportShaohua Li
PCI Express ASPM defines a protocol for PCI Express components in the D0 state to reduce Link power by placing their Links into a low power state and instructing the other end of the Link to do likewise. This capability allows hardware-autonomous, dynamic Link power reduction beyond what is achievable by software-only controlled power management. However, The device should be configured by software appropriately. Enabling ASPM will save power, but will introduce device latency. This patch adds ASPM support in Linux. It introduces a global policy for ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control it. The interface can be used as a boot option too. Currently we have below setting: -default, BIOS default setting -powersave, highest power saving mode, enable all available ASPM state and clock power management -performance, highest performance, disable ASPM and clock power management By default, the 'default' policy is used currently. In my test, power difference between powersave mode and performance mode is about 1.3w in a system with 3 PCIE links. Note: some devices might not work well with aspm, either because chipset issue or device issue. The patch provide API (pci_disable_link_state), driver can disable ASPM for specific device. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19cpumask: use new cpus_scnprintf functionMike Travis
* Cleaned up references to cpumask_scnprintf() and added new cpulist_scnprintf() interfaces where appropriate. * Fix some small bugs (or code efficiency improvments) for various uses of cpumask_scnprintf. * Clean up some checkpatch errors. Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-02Revert "PCI: PCIE ASPM support"Greg Kroah-Hartman
This reverts commit 6c723d5bd89f03fc3ef627d50f89ade054d2ee3b. It caused build errors on non-x86 platforms, config file confusion, and even some boot errors on some x86-64 boxes. All around, not quite ready for prime-time :( Cc: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01PCI: make pci_bus a struct deviceGreg Kroah-Hartman
This moves the pci_bus class device to be a real struct device and at the same time, place it in the device tree in the correct location. Note, the old "bridge" symlink is now gone, but this was a non-standard link and no userspace program used it. If you need to determine the device that the bus is on, follow the standard device symlink, or walk up the device tree. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01PCI: PCIE ASPM supportShaohua Li
PCI Express ASPM defines a protocol for PCI Express components in the D0 state to reduce Link power by placing their Links into a low power state and instructing the other end of the Link to do likewise. This capability allows hardware-autonomous, dynamic Link power reduction beyond what is achievable by software-only controlled power management. However, The device should be configured by software appropriately. Enabling ASPM will save power, but will introduce device latency. This patch adds ASPM support in Linux. It introduces a global policy for ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control it. The interface can be used as a boot option too. Currently we have below setting: -default, BIOS default setting -powersave, highest power saving mode, enable all available ASPM state and clock power management -performance, highest performance, disable ASPM and clock power management By default, the 'default' policy is used currently. In my test, power difference between powersave mode and performance mode is about 1.3w in a system with 3 PCIE links. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28PCI: drivers/pci/pci-sysfs.c: Add missing pci_dev_putJulia Lawall
There should be a pci_dev_put when breaking out of a loop that iterates over calls to pci_get_device and similar functions. This was fixed using the following semantic patch. // <smpl> @@ identifier d; type T; expression e; iterator for_each_pci_dev; @@ T *d; ... for_each_pci_dev(d) {... when != pci_dev_put(d) when != e = d ( return d; | + pci_dev_put(d); ? return ...; ) ...} // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-16Remove capability.h from mm.hAlexey Dobriyan
I forgot to remove capability.h from mm.h while removing sched.h! This patch remedies that, because the only inline function which was using CAP_something was made out of line. Cross-compile tested without regressions on: all powerpc defconfigs all mips defconfigs all m68k defconfigs all arm defconfigs all ia64 defconfigs alpha alpha-allnoconfig alpha-defconfig alpha-up arm i386 i386-allnoconfig i386-defconfig i386-up ia64 ia64-allnoconfig ia64-defconfig ia64-up m68k mips parisc parisc-allnoconfig parisc-defconfig parisc-up powerpc powerpc-up s390 s390-allnoconfig s390-defconfig s390-up sparc sparc-allnoconfig sparc-defconfig sparc-up sparc64 sparc64-allnoconfig sparc64-defconfig sparc64-up um-x86_64 x86_64 x86_64-allnoconfig x86_64-defconfig x86_64-up as well as my two usual configs. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (34 commits) PCI: Only build PCI syscalls on architectures that want them PCI: limit pci_get_bus_and_slot to domain 0 PCI: hotplug: acpiphp: avoid acpiphp "cannot get bridge info" PCI hotplug failure PCI: hotplug: acpiphp: remove hot plug parameter write to PCI host bridge PCI: hotplug: acpiphp: fix slot poweroff problem on systems without _PS3 PCI: hotplug: pciehp: wait for 1 second after power off slot PCI: pci_set_power_state(): check for PM capabilities earlier PCI: cpci_hotplug: Convert to use the kthread API PCI: add pci_try_set_mwi PCI: pcie: remove SPIN_LOCK_UNLOCKED PCI: ROUND_UP macro cleanup in drivers/pci PCI: remove pci_dac_dma_... APIs PCI: pci-x-pci-express-read-control-interfaces cleanups PCI: Fix typo in include/linux/pci.h PCI: pci_ids, remove double or more empty lines PCI: pci_ids, add atheros and 3com_2 vendors PCI: pci_ids, reorder some entries PCI: i386: traps, change VENDOR to DEVICE PCI: ATM: lanai, change VENDOR to DEVICE PCI: Change all drivers to use pci_device->revision ...
2007-07-11sysfs: add parameter "struct bin_attribute *" in .read/.write methods for ↵Zhang Rui
sysfs binary attributes Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11sysfs: kill unnecessary attribute->ownerTejun Heo
sysfs is now completely out of driver/module lifetime game. After deletion, a sysfs node doesn't access anything outside sysfs proper, so there's no reason to hold onto the attribute owners. Note that often the wrong modules were accounted for as owners leading to accessing removed modules. This patch kills now unnecessary attribute->owner. Note that with this change, userland holding a sysfs node does not prevent the backing module from being unloaded. For more info regarding lifetime rule cleanup, please read the following message. http://article.gmane.org/gmane.linux.kernel/510293 (tweaked by Greg to not delete the field just yet, to make it easier to merge things properly.) Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PCI: Make pcibios_add_platform_entries() return errorsMichael Ellerman
Currently pcibios_add_platform_entries() returns void, but could fail, so instead have it return an int and propagate errors up to pci_create_sysfs_dev_files(). Fixes: arch/powerpc/kernel/pci_64.c: In function 'pcibios_add_platform_entries': arch/powerpc/kernel/pci_64.c:878: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result arch/powerpc/kernel/pci_32.c: In function 'pcibios_add_platform_entries': arch/powerpc/kernel/pci_32.c:1043: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PCI: Use a weak symbol for the empty version of pcibios_add_platform_entries()Michael Ellerman
I'm not sure if this is going to fly, weak symbols work on the compilers I'm using, but whether they work for all of the affected architectures I can't say. I've cc'ed as many arch maintainers/lists as I could find. But assuming they do, we can use a weak empty definition of pcibios_add_platform_entries() to avoid having an empty definition on every arch. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02PCI: Free resource files in error path of pci_create_sysfs_dev_files()Michael Ellerman
pci_create_sysfs_dev_files() should call pci_remove_resource_files() in its error path, to match the call it makes to pci_create_resource_files(). Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02PCI: fix sysfs rom file creation for BIOS ROM shadowsJesse Barnes
At one time, if a BIOS ROM shadow was detected for the boot video device (stored at offset 0xc0000), we'd set a special resource flag, IORESOURCE_ROM_SHADOW, so that the sysfs ROM file code could handle it properly. That broke along the way somewhere though, so current kernels will be missing 'rom' files in sysfs if the video device doesn't have an explicit ROM BAR. This patch fixes the regression by moving the video fixup quirk to a little later in the boot cycle (to avoid having its work undone by PCI resource allocation) and checking in the PCI sysfs code whether a rom file should be created due to a shadow resource, which is also moved to a little later in the boot cycle so it will occur after the video fixup. Tested and works on my i386 test box. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16PCI: Make PCI device numa-node attribute visible in sysfsBrice Goglin
Export the numa-node attribute of PCI devices in sysfs so that user applications may choose where to be placed accordingly. Signed-off-by: Brice Goglin <Brice.Goglin@ens-lyon.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01PCI: switch pci_{enable,disable}_device() to be nestableInaky Perez-Gonzalez
Changes the pci_{enable,disable}_device() functions to work in a nested basis, so that eg, three calls to enable_device() require three calls to disable_device(). The reason for this is to simplify PCI drivers for multi-interface/capability devices. These are devices that cram more than one interface in a single function. A relevant example of that is the Wireless [USB] Host Controller Interface (similar to EHCI) [see http://www.intel.com/technology/comms/wusb/whci.htm]. In these kind of devices, multiple interfaces are accessed through a single bar and IRQ line. For that, the drivers map only the smallest area of the bar to access their register banks and use shared IRQ handlers. However, because the order at which those drivers load cannot be known ahead of time, the sequence in which the calls to pci_enable_device() and pci_disable_device() cannot be predicted. Thus: 1. driverA starts pci_enable_device() 2. driverB starts pci_enable_device() 3. driverA shutdown pci_disable_device() 4. driverB shutdown pci_disable_device() between steps 3 and 4, driver B would loose access to it's device, even if it didn't intend to. By using this modification, the device won't be disabled until all the callers to enable() have called disable(). This is implemented by replacing 'struct pci_dev->is_enabled' from a bitfield to an atomic use count. Each caller to enable increments it, each caller to disable decrements it. When the count increments from 0 to 1, __pci_enable_device() is called to actually enable the device. When it drops to zero, pci_disable_device() actually does the disabling. We keep the backend __pci_enable_device() for pci_default_resume() to use and also change the sysfs method implementation, so that userspace enabling/disabling the device doesn't disable it one time too much. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-13[PATCH] pci: don't try to remove sysfs files before they are setup.David Miller
The PCI sysfs attributes are created after the initial PCI bus scan. With the addition of more return value checking and assertions in the device and sysfs layers we now can get dumps like this on sparc64: [ 20.135032] Call Trace: [ 20.135042] [0000000000537f88] pci_remove_bus_device+0x30/0xc0 [ 20.135076] [000000000078f890] pci_fill_in_pbm_cookies+0x98/0x440 [ 20.135109] [000000000042e828] sabre_scan_bus+0x230/0x400 [ 20.135139] [000000000078c710] pcibios_init+0x58/0xa0 [ 20.135159] [0000000000416f14] init+0x9c/0x2e0 [ 20.135190] [0000000000417a50] kernel_thread+0x38/0x60 [ 20.135211] [0000000000417170] rest_init+0x18/0x40 [ 20.135514] PCI0(PBMB): Bus running at 33MHz It's triggering because removal of the "config" PCI sysfs file for the device fails. On sparc64, after probing the device, we'll delete the PCI device via pci_remove_bus_device() if we cannot find the firmware device tree node corresponding to it. This is fine, but at this point the sysfs files for the PCI device won't be setup yet. So we should not try to do anything in pci_remove_sysfs_dev_files() if pci_sysfs_init() has not run yet. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26PCI: fix __must_check warningsGreg Kroah-Hartman
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26MSI: Export the PCI_BUS_FLAGS_NO_MSI flag in sysfsBrice Goglin
Export the PCI_BUS_FLAGS_NO_MSI flag of a PCI bus in the sysfs files of its parent device and make it writable. Could be used to: * disable MSI on a device which has not been blacklisted yet * allow MSI when some setpci hacks enable MSI support (for instance on the ServerWorks HT2000 chipset where the MSI HT cap is disabled by default). Architecture where some bus have no parent chipset cannot use this strategy to change MSI support. If the chipset does not have a subordinate bus, its 'bus_msi' file is empty. Also document and warn about the possible danger of changing the flag. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-27[PATCH] 64bit resource: change pci core and arch code to use resource_size_tGreg Kroah-Hartman
Based on a patch series originally from Vivek Goyal <vgoyal@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] PCI: Bus Parity Status sysfs interfaceDoug Thompson
From: Doug Thompson <norsk5@yahoo.com> This patch adds the 'broken_parity_status' sysfs attribute file to a PCI device. Reading this attribute a userland program can determine if PCI device provides false positives (value of 1) in its generation of PCI Parity status, or not (value of 0). As PCI devices are found to be 'bad' in this regard, userland programs can also set the appropriate value (root access only) of a faulty device. This per device information will be used in the EDAC PCI Parity scanner code in a future patch once this interface becomes available. Signed-off-by: Doug Thompson <norsk5@yahoo.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>