aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci/probe.c
AgeCommit message (Collapse)Author
2008-06-10PCI: Disable PME during PCI scanZhao Yakui
If a device supports #PME and can generate PME events from D0, we may see superfluous events before a driver is loaded (drivers should only enable PME as needed), preventing suspend from working if the corresponding GPE was enabled. Likewise, if the ACPI device has the _PRW object, the _PSW/_DSW object will be called in order to disable the wakeup functionality. But when it is allowed to wake up the sleeping state, OSPM will enable it again. So we should disable PME in the course of scanning PCI devices and enable it again only when PME events are actually required to be generated from the requested PCI state (for example, D3_hot or D3_cold). It is also safe to disable PME again when the PME is disabled for the PCI devices. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Li Shaohua <shaohua.li@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-04-29x86/pci: remove flag in pci_cfg_space_size_extYinghai Lu
so let pci_cfg_space_size call it directly without flag. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-04-26x86: multi pci root bus with different io resource range, on 64-bitYinghai Lu
scan AMD opteron io/mmio routing to make sure every pci root bus get correct resource range. Thus later pci scan could assign correct resource to device with unassigned resource. this can fix a system without _CRS for multi pci root bus. Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-26driver core: try parent numa_node at first before using defaultYinghai Lu
in the device_add, we try to use use parent numa_node. need to make sure pci root bus's bridge device numa_node is set. then we could use device->numa_node direclty for all device. and don't need to call pcibus_to_node(). Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26x86_64: set cfg_size for AMD Family 10h in case MMCONFIGYinghai Lu
reuse pci_cfg_space_size but skip check pci express and pci-x CAP ID. Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Cc: Andrew Morton <akpm@linux-foundation.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6: (42 commits) PCI: Change PCI subsystem MAINTAINER PCI: pci-iommu-iotlb-flushing-speedup PCI: pci_setup_bridge() mustn't be __devinit PCI: pci_bus_size_cardbus() mustn't be __devinit PCI: pci_scan_device() mustn't be __devinit PCI: pci_alloc_child_bus() mustn't be __devinit PCI: replace remaining __FUNCTION__ occurrences PCI: Hotplug: fakephp: Return success, not ENODEV, when bus rescan is triggered PCI: Hotplug: Fix leaks in IBM Hot Plug Controller Driver - ibmphp_init_devno() PCI: clean up resource alignment management PCI: aerdrv_acpi.c: remove unneeded NULL check PCI: Update VIA CX700 quirk PCI: Expose PCI VPD through sysfs PCI: iommu: iotlb flushing PCI: simplify quirk debug output PCI: iova RB tree setup tweak PCI: parisc: use generic pci_enable_resources() PCI: ppc: use generic pci_enable_resources() PCI: powerpc: use generic pci_enable_resources() PCI: ia64: use generic pci_enable_resources() ...
2008-04-20PCI: pci_scan_device() mustn't be __devinitAdrian Bunk
WARNING: drivers/pci/built-in.o(.text+0x150f): Section mismatch in reference from the function pci_scan_single_device() to the function .devinit.text:pci_scan_device() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: pci_alloc_child_bus() mustn't be __devinitAdrian Bunk
WARNING: drivers/pci/built-in.o(.text+0xc4c): Section mismatch in reference from the function pci_add_new_bus() to the function .devinit.text:pci_alloc_child_bus() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: clean up resource alignment managementIvan Kokshaysky
Done per Linus' request and suggestions. Linus has explained that better than I'll be able to explain: On Thu, Mar 27, 2008 at 10:12:10AM -0700, Linus Torvalds wrote: > Actually, before we go any further, there might be a less intrusive > alternative: add just a couple of flags to the resource flags field (we > still have something like 8 unused bits on 32-bit), and use those to > implement a generic "resource_alignment()" routine. > > Two flags would do it: > > - IORESOURCE_SIZEALIGN: size indicates alignment (regular PCI device > resources) > > - IORESOURCE_STARTALIGN: start field is alignment (PCI bus resources > during probing) > > and then the case of both flags zero (or both bits set) would actually be > "invalid", and we would also clear the IORESOURCE_STARTALIGN flag when we > actually allocate the resource (so that we don't use the "start" field as > alignment incorrectly when it no longer indicates alignment). > > That wouldn't be totally generic, but it would have the nice property of > automatically at least add sanity checking for that whole "res->start has > the odd meaning of 'alignment' during probing" and remove the need for a > new field, and it would allow us to have a generic "resource_alignment()" > routine that just gets a resource pointer. Besides, I removed IORESOURCE_BUS_HAS_VGA flag which was unused for ages. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Gary Hade <garyhade@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: Expose PCI VPD through sysfsBen Hutchings
Vital Product Data (VPD) may be exposed by PCI devices in several ways. It is generally unsafe to read this information through the existing interfaces to user-land because of stateful interfaces. This adds: - abstract operations for VPD access (struct pci_vpd_ops) - VPD state information in struct pci_dev (struct pci_vpd) - an implementation of the VPD access method specified in PCI 2.2 (in access.c) - a 'vpd' binary file in sysfs directories for PCI devices with VPD operations defined It adds a probe for PCI 2.2 VPD in pci_scan_device() and release of VPD state in pci_release_dev(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: add PCI Express ASPM supportShaohua Li
PCI Express ASPM defines a protocol for PCI Express components in the D0 state to reduce Link power by placing their Links into a low power state and instructing the other end of the Link to do likewise. This capability allows hardware-autonomous, dynamic Link power reduction beyond what is achievable by software-only controlled power management. However, The device should be configured by software appropriately. Enabling ASPM will save power, but will introduce device latency. This patch adds ASPM support in Linux. It introduces a global policy for ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control it. The interface can be used as a boot option too. Currently we have below setting: -default, BIOS default setting -powersave, highest power saving mode, enable all available ASPM state and clock power management -performance, highest performance, disable ASPM and clock power management By default, the 'default' policy is used currently. In my test, power difference between powersave mode and performance mode is about 1.3w in a system with 3 PCIE links. Note: some devices might not work well with aspm, either because chipset issue or device issue. The patch provide API (pci_disable_link_state), driver can disable ASPM for specific device. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: Include PCI domain in PCI bus names on x86/x86_64Gary Hade
The PCI bus names included in /proc/iomem and /proc/ioports are of the form 'PCI Bus #XX' where XX is the bus number. This patch changes the naming to 'PCI Bus XXXX:YY' where XXXX is the domain number and YY is the bus number. For example, PCI bus 14 in domain 0 will show as 'PCI Bus 0000:14' instead of 'PCI Bus #14'. This change makes the naming consistent with other architectures such as ia64 where multiple PCI domain support has been around longer. Signed-off-by: Gary Hade <garyhade@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: remove global list of PCI devicesGreg Kroah-Hartman
This patch finally removes the global list of PCI devices. We are relying entirely on the list held in the driver core now, and do not need a separate "shadow" list as no one uses it. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: add is_added flag to struct pci_devGreg Kroah-Hartman
This lets us check if the device is really added to the driver core or not, which is what we need when walking some of the bus lists. The flag is there in anticipation of getting rid of the other PCI device list, which is what we used to check in this situation. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: make no_pci_devices() use the pci_bus_type listGreg Kroah-Hartman
no_pci_devices() should use the driver core list of PCI devices, not our "separate" one. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19cpumask: use new cpus_scnprintf functionMike Travis
* Cleaned up references to cpumask_scnprintf() and added new cpulist_scnprintf() interfaces where appropriate. * Fix some small bugs (or code efficiency improvments) for various uses of cpumask_scnprintf. * Clean up some checkpatch errors. Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-04PCI: fix section mismatch warning in pci_scan_child_busSam Ravnborg
Fix following warning: WARNING: vmlinux.o(.text+0x47bdb1): Section mismatch in reference from the function pci_scan_child_bus() to the function .devinit.text:pcibios_fixup_bus() We had plenty of functions that could be annotated __devinit but due to the former restriction that exported symbols could not be annotated they were not so. So annotate these function and fix the references from the pci/hotplug/* code to silence the resuting warnings. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-05iommu sg merging: PCI: add dma segment boundary supportFUJITA Tomonori
This adds PCI's accessor for segment_boundary_mask in device_dma_parameters. The default segment_boundary is set to 0xffffffff, same to the block layer's default value (and the scsi mid layer uses the same value). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Greg KH <greg@kroah.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05iommu sg merging: PCI: add device_dma_parameters supportFUJITA Tomonori
This adds struct device_dma_parameters in struct pci_dev and properly sets up a pointer in struct device. The default max_segment_size is set to 64K, same to the block layer's default value. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Mostly-acked-by: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Acked-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-02PCI: fix 4x section mismatch warningsSam Ravnborg
The following warnings were issued during build of drivers/pci with an allyesconfig build: WARNING: o-x86_64/drivers/pci/built-in.o(.text+0xdaf): Section mismatch in reference from the function pci_add_new_bus() to the function .devinit.text:pci_alloc_child_bus() WARNING: o-x86_64/drivers/pci/built-in.o(.text+0x15e2): Section mismatch in reference from the function pci_scan_single_device() to the function .devinit.text:pci_scan_device() WARNING: o-x86_64/drivers/pci/built-in.o(.text+0x1b0c5): Section mismatch in reference from the function pci_bus_assign_resources() to the function .devinit.text:pci_setup_bridge() WARNING: o-x86_64/drivers/pci/built-in.o(.text+0x1b32d): Section mismatch in reference from the function pci_bus_size_bridges() to the function .devinit.text:pci_bus_size_cardbus() Investigating each case closer it looked like all referred functions are only used in the init phase or during hotplug. So to avoid wasting too much memory in the non-hotplug case the simpler fix was to allow the fuctions to use code/data from the __devinit sections. This was done in all four case by adding the __ref annotation. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-02PCI: fix section mismatch warnings referring to pci_do_scan_busSam Ravnborg
Fix following warnings: WARNING: o-x86_64/drivers/pci/built-in.o(.text+0xb054): Section mismatch in reference from the function cpci_configure_slot() to the function .devinit.text:pci_do_scan_bus() WARNING: o-x86_64/drivers/pci/built-in.o(.text+0x153ab): Section mismatch in reference from the function shpchp_configure_device() to the function .devinit.text:pci_do_scan_bus() WARNING: o-x86_64/drivers/pci/built-in.o(__ksymtab+0xc0): Section mismatch in reference from the variable __ksymtab_pci_do_scan_bus to the function .devinit.text:pci_do_scan_bus() PCI hotplug were the only user of pci_do_scan_bus() so moving this function to a separate file that is build only when we enable CONFIG_HOTPLUG_PCI. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-02Revert "PCI: PCIE ASPM support"Greg Kroah-Hartman
This reverts commit 6c723d5bd89f03fc3ef627d50f89ade054d2ee3b. It caused build errors on non-x86 platforms, config file confusion, and even some boot errors on some x86-64 boxes. All around, not quite ready for prime-time :( Cc: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01PCI: make pci_bus a struct deviceGreg Kroah-Hartman
This moves the pci_bus class device to be a real struct device and at the same time, place it in the device tree in the correct location. Note, the old "bridge" symlink is now gone, but this was a non-standard link and no userspace program used it. If you need to determine the device that the bus is on, follow the standard device symlink, or walk up the device tree. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01PCI: PCIE ASPM supportShaohua Li
PCI Express ASPM defines a protocol for PCI Express components in the D0 state to reduce Link power by placing their Links into a low power state and instructing the other end of the Link to do likewise. This capability allows hardware-autonomous, dynamic Link power reduction beyond what is achievable by software-only controlled power management. However, The device should be configured by software appropriately. Enabling ASPM will save power, but will introduce device latency. This patch adds ASPM support in Linux. It introduces a global policy for ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control it. The interface can be used as a boot option too. Currently we have below setting: -default, BIOS default setting -powersave, highest power saving mode, enable all available ASPM state and clock power management -performance, highest performance, disable ASPM and clock power management By default, the 'default' policy is used currently. In my test, power difference between powersave mode and performance mode is about 1.3w in a system with 3 PCIE links. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01PCI: Add missing "space" in printk messagesJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01PCI: remove additional pci_scan_child_bus() prototypeAdrian Bunk
There's already a prototype for pci_scan_child_bus() at the correct place in pci.h, so there's no reason for an additional one. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01PCI: always export pci_scan_single_deviceAdrian Bunk
This patch fixes the following build error with CONFIG_HOTPLUG=n: MODPOST 2137 modules ERROR: "pci_scan_single_device" [drivers/edac/i82875p_edac.ko] undefined! Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Doug Thompson <norsk5@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01PCI: drivers/pci/: remove unused exportsAdrian Bunk
This patch removes the following unused exports: - remove the following unused EXPORT_SYMBOL's: - pci-acpi.c: pci_osc_support_set - proc.c: pci_proc_detach_bus - remove the following unused EXPORT_SYMBOL_GPL's: - bus.c: pci_walk_bus - probe.c: pci_create_bus - setup-res.c: pci_claim_resource Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24driver core: add way to get to bus device klistGreg Kroah-Hartman
This allows an easier way to get to the device klist associated with a struct bus_type (you have three to choose from...) This will make it easier to move these fields to be dynamic in a future patch. The only user of this is the PCI core which horribly abuses this interface to rearrange the order of the pci devices. This should be done using the existing bus device walking functions, but that's left for future patches. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-27[PCI] Do not enable CRS Software Visibility by defaultLinus Torvalds
It appears that some PCI-E bridges do the wrong thing in the presense of CRS Software Visibility and MMCONFIG. In particular, it looks like an ATI bridge (device ID 7936) will return 0001 in the vendor ID field of any bridged devices indefinitely. Not enabling CRS SV avoids the problem, and as we currently do not really make good use of the feature anyway (we just time out rather than do any threaded discovery as suggested by the CRS specs), we're better off just not enabling it. This should fix a slew of problem reports with random devices (generally graphics adapters or fairly high-performance networking cards, since it only affected PCI-E) not getting properly recognized on these AMD systems. If we really want to use CRS-SV, we may end up eventually needing a whitelist of systems where this should be enabled, along with some kind of "pcibios_enable_crs()" query to call the system-specific code. Suggested-by: Loic Prylli <loic@myri.com> Tested-by: Kai Ruhnau <kai@tragetaschen.dyndns.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Greg Kroah-Hartman <greg@kroah.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-17PCI: Restore PCI expansion ROM P2P prefetch window creationGary Hade
Restore PCI expansion ROM P2P prefetch window creation. This patch reverts previous "Avoid creating P2P prefetch window for expansion ROMs" change due to regressions that were spotted on some systems. Signed-off-by: Gary Hade <garyhade@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-10Revert "PCI: fix IDE legacy mode resources"Linus Torvalds
This reverts commit fd6e732186ab522c812ab19c2c5e5befb8ec8115, which helped up things on MIPS, but was wrong for everything else. As Ralf Baechle puts it: "It seems the whole MIPS resource managment is complicated enough (out of necessity) that only a few people actually grok it. Ioports being actually memory mapped on MIPS only makes the confusion worse, sigh." Requested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Alan Cox <alan@redhat.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22Intel IOMMU: PCI generic helper functionKeshavamurthy, Anil S
When devices are under a p2p bridge, upstream transactions get replaced by the device id of the bridge as it owns the PCIE transaction. Hence its necessary to setup translations on behalf of the bridge as well. Due to this limitation all devices under a p2p share the same domain in a DMAR. We just cache the type of device, if its a native PCIe device or not for later use. [akpm@linux-foundation.org: BUG_ON -> WARN_ON+recover] Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Ashok Raj <ashok.raj@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Christoph Lameter <clameter@sgi.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-12PCI: modify PCI bridge control ISA flag for clarityGary Hade
Modify PCI Bridge Control ISA flag for clarity This patch changes PCI_BRIDGE_CTL_NO_ISA to PCI_BRIDGE_CTL_ISA and modifies it's clarifying comment and locations where used. The change reduces the chance of future confusion since it makes the set/unset meaning of the bit the same in both the bridge control register and bridge_ctl field of the pci_bus struct. Signed-off-by: Gary Hade <garyhade@us.ibm.com> Acked-by: Linas Vepstas <linas@austin.ibm.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12PCI: avoid P2P prefetch window for expansion ROMsGary Hade
Avoid creating P2P prefetch window for expansion ROMs Because of the future possibility that P2P prefetch windows will contain address ranges above 4GB some BIOSes are providing space in the P2P non-prefetch windows for expansion ROMs. This is due to expansion ROM BAR 32-bit limitation. When expansion ROM BARs without BIOS assigned address(es) are currently found behind a P2P bridge, the kernel attempts to create a P2P prefetch window for them even though space for them has already been provided in the non-prefetch window. _CRS on some systems with certain resource conservation conscious BIOSes may not provide the extra 1MB or more memory resource needed for the expansion ROM motivated prefetch window causing resource allocation errors. This change corrects the problem by removing IORESOURCE_PREFETCH from the expansion ROM flags initialization. It also removes IORESOURCE_CACHEABLE which seems inappropriate if only non-cacheable memory is available. Signed-off-by: Gary Hade <gary.hade@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12PCI: skip ISA ioresource alignment on some systemsGary Hade
Skip ISA ioresource alignment on some systems To conserve limited PCI i/o resource on some IBM multi-node systems, the BIOS allocates (via _CRS) and expects the kernel to use addresses in ranges currently excluded by pcibios_align_resource() [i386/pci/i386.c]. This change allows the kernel to use the currently excluded address ranges on the IBM x3800, x3850, and x3950. Signed-off-by: Gary Hade <gary.hade@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12PCI: fix IDE legacy mode resourcesYoichi Yuasa
I got the following error on MIPS Cobalt. PCI: Unable to reserve I/O region #1:8@f00001f0 for device 0000:00:09.1 pata_via 0000:00:09.1: failed to request/iomap BARs for port 0 (errno=-16) PCI: Unable to reserve I/O region #3:8@f0000170 for device 0000:00:09.1 pata_via 0000:00:09.1: failed to request/iomap BARs for port 1 (errno=-16) pata_via 0000:00:09.1: no available native port The legacy mode IDE resources set the following order. pci_setup_device() Legacy mode ATA controllers have fixed addresses. IDE resources: 0x1F0-0x1F7, 0x3F6, 0x170-0x177, 0x376 | V pcibios_fixup_bus() MIPS Cobalt PCI bus regions have the -0x10000000 offset from PCI resources. pcibios_fixup_bus() fix PCI bus regions. 0x1F0 - 0x10000000 = 0xF00001F0 | V ata_pci_init_one() PCI: Unable to reserve I/O region #1:8@f00001f0 for device 0000:00:09.1 In some architectures, PCI bus regions have the offset from PCI resources. For this reason, pci_setup_device() should set PCI bus regions to dev->resource[]. [akpm@linux-foundation.org: use struct initialiser] Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Greg KH <greg@kroah.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-09-11PCI: remove devinit from pci_read_bridge_basesRalf Baechle
On MIPS with PCI && !HOTPLUG, I'm currently getting the following modpost warning: MODPOST vmlinux.o WARNING: vmlinux.o(.text+0x1ce128): Section mismatch: reference to .init.text:pci_read_bridge_bases (between 'pcibios_fixup_bus' and 'pcibios_enable_device') On MIPS I have the call chains pci_scan_child_bus -> pcibios_fixup_bus -> pci_read_bridge_bases. pci_scan_child_bus can't be __devinit because it it is an exported symbol, thus pcibios_fixup_bus and pci_read_bridge_bases can't be either. For some reason I don't see this issue on x86; I blame compiler differences. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22PCI: lets kill the 'PCI hidden behind bridge' messageBernhard Kaindl
Adrian Bunk wrote: > Alois Nešpor wrote >> PCI: Bus #0b (-#0e) is hidden behind transparent bridge #0a (-#0b) (try 'pci=assign-busses') >> Please report the result to linux-kernel to fix this permanently" >> >> dmesg: >> "Yenta: Raising subordinate bus# of parent bus (#0a) from #0b to #0e" >> without pci=assign-busses and nothing with pci=assign-busses. > > Bernhard? Ok, lets kill the message. As Alois Nešpor also saw, that's fixed up by Yenta, so PCI does not have to warn about it. PCI could still warn about it if is_cardbus is 0 in that instance of pci_scan_bridge(), but so far I have not seen a report where this would have been the case so I think we can spare the kernel of that check (removes ~300 lines of asm) unless debugging is done. History: The whole check was added in the days before we had the fixup for this in Yenta and pci=assign-busses was the only way to get CardBus cards detected on many (not all) of the machines which give this warning. In theory, there could be cases when this warning would be triggered and it's not cardbus, then the warning should still apply, but I think this should only be the case when working on a completely broken PCI setup, but one may have already enabled the debug code in drivers/pci and the patched check would then trigger. I do not sign this off yet because it's completely untested so far, but everyone is free to test it (with the #ifdef DEBUG replaced by #if 1 and pr_debug( changed to printk(. We may also dump the whole check (remove everything within the #ifdef from the source) if that's perferred. On Alois Nešpor's machine this would then (only when debugging) this message: "PCI: Bus #0b (-#0e) is partially hidden behind transparent bridge #0a (-#0b)" "partially" should be in the message on his machine because #0b of #0b-#0e is reachable behind #0a-#0b, but not #0c-#0e. But that differentiation is now moot anyway because the fixup in Yenta takes care of it as far as I could see so far, which means that unless somebody is debugging a totally broken PCI setup, this message is not needed anymore, not even for debugging PCI. Ok, here the patch with the following changes: * Refined to say that the bus is only partially hidden when the parent bus numbers are not totally way off (outside of) the child bus range * remove the reference to pci=assign-busses and the plea to report it We could add a pure source code-only comment to keep a reference to pci=assign-busses the in case when this is triggered by someone who is debugging the cause of this message and looking the way to solve it. From: Bernhard Kaindl <bk@suse.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-16fix jvc cdrom drive lockupZhang, Yanmin
Before calling init_hwif_default, ide_unregister gets lock ide_lock and disables irq. init_hwif_default calls ide_default_io_base which calls pci_get_device and later pci_get_subsys tries to apply for semaphore pci_bus_sem and goes to sleep. Mostly, pci_get_device should be called when irq is turned on. ide_default_io_base just needs find if list pci_devices is empty. Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com> Cc: Greg KH <greg@kroah.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (34 commits) PCI: Only build PCI syscalls on architectures that want them PCI: limit pci_get_bus_and_slot to domain 0 PCI: hotplug: acpiphp: avoid acpiphp "cannot get bridge info" PCI hotplug failure PCI: hotplug: acpiphp: remove hot plug parameter write to PCI host bridge PCI: hotplug: acpiphp: fix slot poweroff problem on systems without _PS3 PCI: hotplug: pciehp: wait for 1 second after power off slot PCI: pci_set_power_state(): check for PM capabilities earlier PCI: cpci_hotplug: Convert to use the kthread API PCI: add pci_try_set_mwi PCI: pcie: remove SPIN_LOCK_UNLOCKED PCI: ROUND_UP macro cleanup in drivers/pci PCI: remove pci_dac_dma_... APIs PCI: pci-x-pci-express-read-control-interfaces cleanups PCI: Fix typo in include/linux/pci.h PCI: pci_ids, remove double or more empty lines PCI: pci_ids, add atheros and 3com_2 vendors PCI: pci_ids, reorder some entries PCI: i386: traps, change VENDOR to DEVICE PCI: ATM: lanai, change VENDOR to DEVICE PCI: Change all drivers to use pci_device->revision ...
2007-07-11sysfs: kill unnecessary attribute->ownerTejun Heo
sysfs is now completely out of driver/module lifetime game. After deletion, a sysfs node doesn't access anything outside sysfs proper, so there's no reason to hold onto the attribute owners. Note that often the wrong modules were accounted for as owners leading to accessing removed modules. This patch kills now unnecessary attribute->owner. Note that with this change, userland holding a sysfs node does not prevent the backing module from being unloaded. For more info regarding lifetime rule cleanup, please read the following message. http://article.gmane.org/gmane.linux.kernel/510293 (tweaked by Greg to not delete the field just yet, to make it easier to merge things properly.) Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PCI: read revision ID by defaultAuke Kok
Currently there are 97 occurrences where drivers need the pci revision ID. We can do this once for all devices. Even the pci subsystem needs the revision several times for quirks. The extra u8 member pads out nicely in the pci_dev struct. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PCI: point people to Bernhard instead of the linux-kernel listGreg Kroah-Hartman
Back in commit 8c4b2cf9af9b4ecc29d4f0ec4ecc8e94dc4432d7, Bernhard said that he would fix up all instances of when this message happens. So point people at him instead of the linux-kernel list which can not fix things up. Cc: Bernhard Kaindl <bk@suse.de> Cc: Dave Jones <davej@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Miles Lane <miles.lane@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02MSI: Use a list instead of the custom link structureMichael Ellerman
The msi descriptors are linked together with what looks a lot like a linked list, but isn't a struct list_head list. Make it one. The only complication is that previously we walked a list of irqs, and got the descriptor for each with get_irq_msi(). Now we have a list of descriptors and need to get the irq out of it, so it needs to be in the actual struct msi_desc. We use 0 to indicate no irq is setup. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02PCI: Convert to alloc_pci_dev()Michael Ellerman
Convert code that allocs a struct pci_dev to use alloc_pci_dev(). Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02PCI: Create alloc_pci_dev(), the one true way to create a struct pci_devMichael Ellerman
There are currently several places in the kernel where we kmalloc() a struct pci_dev and start initialising it. It'd be preferable to have an allocator so we can ensure the pci_dev is correctly initialised in one place. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02pci: do not mark exported functions as __devinitSam Ravnborg
Functions marked __devinit will be removed after kernel init. But being exported they are potentially called by a module much later. So the safer choice seems to be to keep the function even in the non CONFIG_HOTPLUG case. This silence the follwoing section mismatch warnings: WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_add_device from __ksymtab_gpl between '__ksymtab_pci_bus_add_device' (at offset 0x20) and '__ksymtab_pci_walk_bus' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_create_bus from __ksymtab_gpl between '__ksymtab_pci_create_bus' (at offset 0x40) and '__ksymtab_pci_stop_bus_device' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_max_busnr from __ksymtab_gpl between '__ksymtab_pci_bus_max_busnr' (at offset 0xc0) and '__ksymtab_pci_assign_resource_fixed' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_claim_resource from __ksymtab_gpl between '__ksymtab_pci_claim_resource' (at offset 0xe0) and '__ksymtab_pcie_port_bus_type' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_add_devices from __ksymtab between '__ksymtab_pci_bus_add_devices' (at offset 0x70) and '__ksymtab_pci_bus_alloc_resource' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_scan_bus_parented from __ksymtab between '__ksymtab_pci_scan_bus_parented' (at offset 0x90) and '__ksymtab_pci_root_buses' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_assign_resources from __ksymtab between '__ksymtab_pci_bus_assign_resources' (at offset 0x4d0) and '__ksymtab_pci_bus_size_bridges' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_size_bridges from __ksymtab between '__ksymtab_pci_bus_size_bridges' (at offset 0x4e0) and '__ksymtab_pci_setup_cardbus' Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-23Revert "adjust legacy IDE resource setting (v2)"Bartlomiej Zolnierkiewicz
This reverts commit ed8ccee0918ad063a4741c0656fda783e02df627. It causes hang on boot for some users and we don't yet know why: http://bugzilla.kernel.org/show_bug.cgi?id=7562 http://lkml.org/lkml/2007/4/20/404 http://lkml.org/lkml/2007/3/25/113 Just reverse it for 2.6.21-final, having broken X server is somehow better than unbootable system. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-03-03adjust legacy IDE resource setting (v2)Jan Beulich
The change to force legacy mode IDE channels' resources to fixed non-zero values confuses (at least some versions of) X, because the values reported by the kernel and those readable from PCI config space aren't consistent anymore. Therefore, this patch arranges for the respective BARs to also get updated if possible. Signed-off-by: Jan Beulich <jbeulich@novell.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>