aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci/quirks.c
AgeCommit message (Collapse)Author
2008-07-04pci: VT3336 can't do MSI eitherTejun Heo
It seems VT3336 can't do msi either as with its bro 3351. Disable it. Reported in the following SUSE bug. https://bugzilla.novell.com/show_bug.cgi?id=300001 Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-02PCI: Limit VPD read/write lengths for Broadcom 5706, 5708, 5709 rev.Benjamin Li
For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the VPD end tag will hang the device. This problem was initially observed when a vpd entry was created in sysfs ('/sys/bus/pci/devices/<id>/vpd'). A read to this sysfs entry will dump 32k of data. Reading a full 32k will cause an access beyond the VPD end tag causing the device to hang. Once the device is hung, the bnx2 driver will not be able to reset the device. We believe that it is legal to read beyond the end tag and therefore the solution is to limit the read/write length. A majority of this patch is from Matthew Wilcox who gave code for reworking the PCI vpd size information. A PCI quirk added for the Broadcom NIC's to limit the read/write's. Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-05-15Clean up 'print_fn_descriptor_symbol()' typesLinus Torvalds
Everybody wants to pass it a function pointer, and in fact, that is what you _must_ pass it for it to make sense (since it knows that ia64 and ppc64 use descriptors for function pointers and fetches the actual address from there). So don't make the argument be a 'unsigned long' and force everybody to add a cast. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-13PCI: enable nv_msi_ht_cap_quirk for ALi bridgesBjörn Krombholz
This applies the NVidia MSI enabled flag for HT capable devices quirk to ALi bridges as well. As described in more detail in http://bugzilla.kernel.org/show_bug.cgi?id=10667 this is required for my board which is using an nForce 3 250Gb chipset with an ALi M1695 northbridge. It fixes a regression introduced in 2.6.24 that made the internal NIC of the board unusable (MSI initialisation of the NIC but disabled MSI on the northbridge devices. Signed-off-by: Björn Krombholz <fox.box@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-04-20PCI: Update VIA CX700 quirkTim Yamin
This follows up 53a9bf4267b8b1f958dbeb7c8c1ef21c82229b71. Some newer CX700 BIOSes from our vendor have PCI Bus Parking disabled but PCI Master read caching enabled. This creates problems such as system freezing when both the network controller and the USB controller are active and one of them is pretty busy (e.g. heavy network traffic). This patch separates the checks and both the bus parking and the read caching are disabled independently if either is enabled by the BIOS. Signed-off-by: Tim Yamin <tim.yamin@zonbu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: simplify quirk debug outputBjorn Helgaas
print_fn_descriptor_symbol() prints the address if we don't have a symbol, so no need to print both. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-28pci: revert SMBus unhide on HP Compaq nx6110Jean Delvare
This reverts commit 3c0a654e390d00fef9d8faed758f5e1e8078adb5 and fixes kernel bug #10245: http://bugzilla.kernel.org/show_bug.cgi?id=10245 The HP Compaq nc6120 has the same PCI sub-device ID as the nx6110, and the SMBus is used by ACPI for thermal management on the nc6120, so Linux should not attach a native driver to it. This means that this quirk is unsafe and has to be removed. I also added a comment to help developers realize that adding new IDs to this SMBus unhiding quirk table should be done only with great care, and in particular only after checking that ACPI is not making use of the SMBus. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Tomasz Koprowski <tomek@koprowski.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04PCI: consolidate duplicated MSI enable functionsBjorn Helgaas
Two recent patches added basically the same code to turn on HT MSI mapping: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=6bae1d96c6d7dde078994f6cb98235fd46f8736b http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=9dc625e72309e1c919ea3e7f51d0ffca96123787 There's no need to have both, so this patch removes one copy. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04PCI: use dev_printk in quirk messagesBjorn Helgaas
Convert quirk printks to dev_printk(). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21PCI: quirks: set 'En' bit of MSI Mapping for devices onHT-based nvidia platformPeer Chen
According to HT spec, to get message interrupt from devices mapped to HT interrupt message, the 'En' bit of MSI Mapping capability need to be set. The patch do this setting in quirks code for the devices on HT-based nvidia platform. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Andy Currid <acurrid@nvidia.com> Signed-off-by: Peer Chen <pchen@nvidia.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21PCI: AMD SATA IDE mode quirkCrane Cai
PCI: modify SATA IDE mode quirk When initialize and resume, SB600/700/800 need to set SATA mode correctly. Signed-off-by: Crane Cai <crane.cai@amd.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01PCI: modify SB700 SATA MSI quirkShane Huang
SB700 SATA MSI bug will be fixed in SB700 revision A21 at hardware level, but the SB700 revision older than A21 will also be found in the market. This patch modify the original quirk commit bc38b411fe696fad32b261f492cb4afbf1835256 instead of withdrawing it. The patch also removes quirk to 0x4395 because 0x4395 is SB800 device ID. Signed-off-by: Shane Huang <shane.huang@amd.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01PCI: use dev_printk in quirk messagesbjorn.helgaas@hp.com
Convert quirk printks to dev_printk(). I made the MSI disable messages a little more consistent: - always use "disabled", not "deactivated" - specify "device MSI disabled" or "subordinate MSI disabled" when disabling MSI for only a specific device or subordinate bus Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01PCI: print quirk name in debug messagesbjorn.helgaas@hp.com
Instead of printing this: PCI: Calling quirk c023b250 for 0000:00:00.0 we can print this: pci 0000:00:00.0: calling quirk 0xc023b270: quirk_cardbus_legacy+0x0/0x30() The address is superfluous because sprint_symbol() includes the address if the symbol lookup fails, but this is the same style used in do_initcalls() and pnp_fixup_device(). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01PCI: fix for quirk_e100_interrupt()Ivan Kokshaysky
Check that the e100 is in the D0 power state. If it's not, it won't respond to MMIO accesses and we end up with master-abort machine checks on some platforms. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01PCI: quirk: enable MSI Mapping on HT1000Sebastien Dugue
Add a quirk to enable the MSI mapping capability on HyperTransport bridges. Wire Broadcom's HT1000 to use the quirk. Signed-off-by: Sebastien Dugue <sebastien.dugue@bull.net> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andy Currid <acurrid@nvidia.com> Cc: Peer Chen <pchen@nvidia.com> Cc: Prakash Punnoor <prakash@punnoor.de> Cc: Andrew Morton <akpm@linux-foundation.org> Acked-by: Michael Chan <mchan@broadcom.com> Cc: Greg KH <greg@kroah.com> Cc: Andy Currid <acurrid@nvidia.com> Cc: Peer Chen <pchen@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01PCI: Unhide the SMBus on the HP xw4100Jean Delvare
Unhide the SMBus on the HP xw4100. This gives access to a hardware monitoring chip (ADT7463) and to the memory module SPD EEPROMs. I checked that ACPI wasn't accessing the SMBus, so it should be safe. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01PCI: drivers/pci/quirks.c: coding-style cleanupAndrew Morton
Remove lots of space-before-) instances. Perhaps these were a workaround for problems in some long-dead cpp version. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01PCI: VIA CX700 quirk to disable PCI Bus ParkingTim Yamin
PCI Bus Parking and PCI Master read caching on the VIA CX700 is buggy and can lead to problems such as USB2.0 packet loss if a VT6212L controller is on the PCI bus. It's disabled by default, but some BIOSes turn these features on and this patch reverts the configuration to the safe defaults. Signed-off-by: Tim Yamin <tim.yamin@zonbu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01PCI: quirk_vialatency: Omit reading pci revision IDAuke Kok
Don't read the revision ID unnecessary since the PCI subsystem fills this field in already. Updated to fix a thinko bug in a previously sent patch. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-11ACPI: apply quirk_ich6_lpc_acpi to more ICH8 and ICH9Zhao Yakui
It is important that these resources be reserved to avoid conflicts with well known ACPI registers. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-05PCI: Remove 3 incorrect MSI quirks.David Miller
Now that we have dealt with the real issue, in that some ATI SATA and USB controllers needed the INTX_DISABLE quirk, we can remove these AMD chipset global MSI disabling quirks. This reverts three changesets: 4be8f906435a6af241821ab5b94b2b12cb7d57d8 (PCI: disable MSI on RS690) aea6a433f50cd89b9cbd10850fd0b32f961f9883 (PCI: disable MSI on RD580) f122392f679ebed39db08074f935d770504623eb (PCI: disable MSI on RX790) This is based upon testing and feedback from Shane Huang <Shane.Huang@amd.com>. Cc: Shane Huang <Shane.Huang@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-05PCI: Add MSI INTX_DISABLE quirks for ATI SB700/800 SATA and IXP SB400 USBDavid Miller
Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-05PCI: Add quirk for devices which disable MSI when INTX_DISABLE is set.David Miller
A reasonably common problem with some devices is that they will disable MSI generation when the INTX_DISABLE bit is set in the PCI_COMMAND register. Quirk this explicitly, guarding the pci_intx() calls in msi.c with this quirk indication. The first entries for this quirk are for 5714 and 5780 Tigon3 chips, and thus we can remove the workaround code from the tg3.c driver. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Michael Chan <mchan@broadcom.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-05PCI: Add MSI quirk for ServerWorks HT1000 PCIX bridge.David Miller
This is the fix for the following problem: https://bugzilla.redhat.com/show_bug.cgi?id=227657 The bnx2 device 5706 complains about MSI not working behind a ServerWorks HT1000 PCIX bridge. An earlier commit to fix the problem: e3008dedff4bdc96a5f67224cd3d8d12237082a0: "PCI: disable MSI by default on systems with Serverworks HT1000 chips" was not entirely correct, and has been reverted. MSI does not work on the PCIX bus because the BIOS did not set the HT_MSI_FLAGS_ENABLE bit in the HyperTransport MSI capability on the bridge. We use the existing quirk_msi_ht_cap() to detect the problem and disable MSI in all buses behind it. Signed-off-by: Michael Chan <mchan@broadcom.com> Cc: Anantha Subramanyam <ananth@broadcom.com> Cc: Naren Sankar <nsankar@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-05PCI: Revert "PCI: disable MSI by default on systems with Serverworks HT1000 ↵David Miller
chips" This reverts commit e3008dedff4bdc96a5f67224cd3d8d12237082a0. The real bug was an INTX issue in the tg3 ethernet chip, and cured by commit c129d962a66c76964954a98b38586ada82cf9381 Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-23jmicron: update quirk for JMB361/3/5/6Tejun Heo
Set bits 0, 4, 5 and 7 of PCI configuration register 0x40 in the quirk. This has the following effects and is recommended by the vendor. * Force enable of IDE channels (used to be left alone as BIOS configured) * Change initial phase behavior of PIO cycle such that the host pulls down the bus instead of tristating it. Vendor recommends this setting. The above settings are better for the current generation of controllers and needed for the upcoming next generation. Tested on JMB363. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Ethan Hsiao <ethanhsiao@jmicron.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12PCI: re-enable onboard sound on "MSI K8T Neo2-FIR"Johannes Goecke
On the "MSI K8T Neo2-FIR" board the BIOS disables the onboard soundcard, if a second PCI soundcard is present. This patch sets the korrect register bit to enable the onboard sound. Removed old code in /drivers/pci/quirks.c that only checks for the PCI-ID and fires on any Board with VIA 8237. New code in /arch/i386/pci/fixup.c checks the DMI-tables and only runs on the specific board. Signed-off-by: Johannes Goecke <goecke@upb.de> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12PCI: quirk_vt82c586_acpi: Omit reading PCI revision IDAuke Kok
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12PCI: quirk amd_8131_mmrbc: Omit reading pci revision IDAuke Kok
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Cc: Peter Oruba <peter.oruba@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-09-28Fix bogus PCI quirk for e100Benjamin Herrenschmidt
Linas reported me that some machines were crashing at boot in quirk_e100_interrupt. It appears that this quirk is doing an ioremap directly on a PCI BAR value, which isn't legal and will cause all sorts of bad things to happen on architectures where PCI BARs don't directly match processor bus addresses. This fixes it by using the proper PCI resources instead which is possible since the quirk has been moved by a previous commit to happen late enough for that. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-11PCI: unhide SMBus on Compaq Deskpro EP 401963-001 motherboardgw.kernel@tnode.com
PCI quirk to unhide SMBus on Compaq Deskpro EP 401963-001 (PCA# 010174) motherboard. Signed-off-by: Greg White <gw.kernel@tnode.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22PCI: Run k8t_sound_hostbridge quirk only when neededJean Delvare
The k8t_sound_hostbridge PCI quick fires on my motherboard (Jetway K8M8MS) while it shouldn't: the on-board sound chip is not disabled and is working just fine. Looking at the code, I see that we are running the quirk for two distinct register values (0x88 and 0xc8) and then clear bit 6 (0x40). However value 0x88 already has bit 6 cleared so this is a no-op. This is what happens on my board. Thus I believe that the quirk should only be run for register value 0xc8. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22PCI: disable MSI on RX790Tejun Heo
RX790 can't do MSI like its predecessors. Disable MSI on RX790. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22PCI: disable MSI on RD580Tejun Heo
RD580 can't do MSI like its predecessors. Disable MSI on RD580. Signed-off-by: Tejun Heo <teheo@suse.de> CC: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22PCI: disable MSI on RS690Tejun Heo
RS690 can't do MSI like its predecessors. Disable MSI on RS690. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Henry Su <henry.su@amd.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22PCI: quirk_e100_interrupt() called too earlyMarian Balakowicz
quirk_e100_interrupts() is called after PCI controller is initialized and before PCI bus enumeration is performed. On some powerpc platforms which modify PCI controller configuration and set different MEM and IO windows than those set by firmware quirk_e100_interrupt() is causing kernel panic as it tries to read from device BAR0 offets which at this time points to a invalid PCI window (set by firmware). This patch delays the quirk_100_interrupt() to pci_fixup_final phase, which happens after bus enumeration and before PCI enable and device driver initialization. Signed-off-by: Marian Balakowicz <m8@semihalf.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PCI: pci-x-pci-express-read-control-interfaces cleanupsAndrew Morton
- remove unneeded local - 80-col fix Cc: Peter Oruba <peter.oruba@amd.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PCI: Change all drivers to use pci_device->revisionAuke Kok
Instead of all drivers reading pci config space to get the revision ID, they can now use the pci_device->revision member. This exposes some issues where drivers where reading a word or a dword for the revision number, and adding useless error-handling around the read. Some drivers even just read it for no purpose of all. In devices where the revision ID is being copied over and used in what appears to be the equivalent of hotpath, I have left the copy code and the cached copy as not to influence the driver's performance. Compile tested with make all{yes,mod}config on x86_64 and i386. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PCI: add PCI-X/PCI-Express read control interfacesPeter Oruba
This patch introduces an interface to read and write PCI-X / PCI-Express maximum read byte count values from PCI config space. There is a second function that returns the maximum _designed_ read byte count, which marks the maximum value for a device, since some drivers try to set MMRBC to the highest allowed value and rely on such a function. Based on patch set by Stephen Hemminger <shemminger@linux-foundation.org> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Peter Oruba <peter.oruba@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-31PCI: quirk disable MSI on via vt3351Jay Cliburn
The Via VT3351 APIC does not play well with MSI and unleashes a flood of APIC errors when MSI is used to deliver interrupts. The problem was recently exposed when the atl1 network device driver, which enables MSI by default, stimulated APIC errors on an Asus M2V mainboard, which employs the Via VT3351. See http://bugzilla.kernel.org/show_bug.cgi?id=8472 for additional details on this bug. Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-31PCI: disable MSI by default on systems with Serverworks HT1000 chipsAndy Gospodarek
I've been seeing lots of messages like these: eth0: No interrupt was generated using MSI, switching to INTx mode. Please report this failure to the PCI maintainer and include system chipset information. On several systems that use the following Severworks HT1000 (also sometimes labeled as a Broadcom chipset as well) bridge chips. It doesn't appear MSI works well (if at all) on these systems. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-31pci-quirks: fix MSI disabling on RS400-200 and RS480Tejun Heo
Commit c0affe9db42bf85f4a606b3262c35ec59a5d3788 doesn't work because the host controller is being quirked not a PCI bridge. This patch reverts the commit, rename quirk_svw_msi() to quirk_disable_all_msi() and use it instead. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Matias Alejandro Torres <torresmat@gmail.com> Cc: Greg K-H <greg@kroah.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11Add the combined mode for ATI SB700Henry Su
Besides those modes in ATI SB600 SATA controller, ATI SB700 supports one more mode:the combined mode. The combined mode is a Legacy IDE mode used for compatibility with some old OS without AHCI driver, but now it is not necessary for Linux since the kernel has supported AHCI. Signed-off-by: Luugi Marsan <luugi.marsan@amd.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-02pci-quirks: disable MSI on RS400-200 and RS480Tejun Heo
MSI doesn't work on RS400-200 and RS480 requiring pci=nomsi kernel boot parameter for ahci to work. This patch disables MSI on those chips. http://thread.gmane.org/gmane.linux.ide/17820 http://thread.gmane.org/gmane.linux.ide/17516 https://bugzilla.novell.com/show_bug.cgi?id=263893 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-28libata/IDE: remove combined mode quirkJeff Garzik
Both old-IDE and libata should be able handle all controllers and devices found using normal resource reservation methods. This eliminates the awful, low-performing split-driver configuration where old-IDE drove the PATA portion of a PCI device, in PIO-only mode, and libata drove the SATA portion of the /same/ PCI device, in DMA mode. Typically vendors would ship SATA hard drive / PATA optical configuration, which would lend itself to slow (PIO-only) CD-ROM performance. For Intel users running in combined mode, it is now wholly dependent on your driver choice (potentially link order, if you compile both drivers in) whether old-IDE or libata will drive your hardware. In either case, you will get full performance from both SATA and PATA ports now, without having to pass a kernel command line parameter. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-26PCI: Stop unhiding the SMBus on Toshiba laptopsJean Delvare
It was found that the Toshiba laptops with hidden Intel SMBus have SMM code handling the thermal management which accesses the SMBus. Thus it is not safe to unhide it and let Linux access it. We have to leave the SMBus hidden. SMM is a pain, really. This fixes bugs #6315 and #6395, for good this time. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-05[PATCH] msi: sanely support hardware level msi disablingEric W. Biederman
In some cases when we are not using msi we need a way to ensure that the hardware does not have an msi capability enabled. Currently the code has been calling disable_msi_mode to try and achieve that. However disable_msi_mode has several other side effects and is only available when msi support is compiled in so it isn't really appropriate. Instead this patch implements pci_msi_off which disables all msi and msix capabilities unconditionally with no additional side effects. pci_disable_device was redundantly clearing the bus master enable flag and clearing the msi enable bit. A device that is not allowed to perform bus mastering operations cannot generate intx or msi interrupt messages as those are essentially a special case of dma, and require bus mastering. So the call in pci_disable_device to disable msi capabilities was redundant. quirk_pcie_pxh also called disable_msi_mode and is updated to use pci_msi_off. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01ahci/pata_jmicron: match class not function numberTejun Heo
Make jmiron_ata quirk update pdev->class after programming the device and update ahci and pata_jmicron such that they match class code instead of checking function number manually. For ahci, it matches for vendor and class. For pata_jmicron, it matches vendor, device and class as IDE class isn't as well defined as AHCI class. This makes jmicron device matching more conventional and script friendly. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-01jmicron ATA: reimplement jmicron ATA quirkTejun Heo
Reimplement jmicron ATA quirk. * renamed to quirk_jmicron_ata() * quirk is invoked only for the affected controllers * programming is stricter. e.g. conf5 bit24 is cleared if unnecessary. * code factored for readability * JMB360 and JMB368 are programmed into proper mode Verified on JMB360, 363 and 368. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 20:10:41 +0000