aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)Author
2009-06-10Merge branch 'irq-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (76 commits) x86, apic: Fix dummy apic read operation together with broken MP handling x86, apic: Restore irqs on fail paths x86: Print real IOAPIC version for x86-64 x86: enable_update_mptable should be a macro sparseirq: Allow early irq_desc allocation x86, io-apic: Don't mark pin_programmed early x86, irq: don't call mp_config_acpi_gsi() if update_mptable is not enabled x86, irq: update_mptable needs pci_routeirq x86: don't call read_apic_id if !cpu_has_apic x86, apic: introduce io_apic_irq_attr x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector(), fix x86: read apic ID in the !acpi_lapic case x86: apic: Fixmap apic address even if apic disabled x86: display extended apic registers with print_local_APIC and cpu_debug code x86: read apic ID in the !acpi_lapic case x86: clean up and fix setup_clear/force_cpu_cap handling x86: apic: Check rev 3 fadt correctly for physical_apic bit x86/pci: update pirq_enable_irq() to setup io apic routing x86/acpi: move setup io apic routing out of CONFIG_ACPI scope x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector() ...
2009-06-04PCI: use fixed-up device class when configuring deviceYu Zhao
The device class may be changed after the fixup, so re-read the class value from pci_dev when configuring the device. Otherwise some devices such as JMicron SATA controller won't work. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Reviewed-by: Grant Grundler <grundler@parisc-linux.org> Tested-by: Marc Dionne <marc.c.dionne@gmail.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-01Merge branch 'linus' into irq/numaIngo Molnar
Conflicts: arch/mips/sibyte/bcm1480/irq.c arch/mips/sibyte/sb1250/irq.c Merge reason: we gathered a few conflicts plus update to latest upstream fixes. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-27PCI Hotplug: acpiphp: don't store a pci_dev in acpiphp_funcAlex Chiang
An oops can occur if a user attempts to use both PCI logical hotplug and the ACPI physical hotplug driver (acpiphp) in this sequence, where $slot/address == $device. In other words, if acpiphp has claimed a PCI device, and that device is logically removed, then acpiphp may oops when it attempts to access it again. # echo 1 > /sys/bus/pci/devices/$device/remove # echo 0 > /sys/bus/pci/slots/$slot/power Unable to handle kernel NULL pointer dereference (address 0000000000000000) Call Trace: [<a000000100016390>] show_stack+0x50/0xa0 [<a000000100016c60>] show_regs+0x820/0x860 [<a00000010003b390>] die+0x190/0x2a0 [<a000000100066a40>] ia64_do_page_fault+0x8e0/0xa40 [<a00000010000c7a0>] ia64_native_leave_kernel+0x0/0x270 [<a0000001003b2660>] pci_remove_bus_device+0x120/0x260 [<a0000002060549f0>] acpiphp_disable_slot+0x410/0x540 [acpiphp] [<a0000002060505c0>] disable_slot+0xc0/0x120 [acpiphp] [<a0000002040d21c0>] power_write_file+0x1e0/0x2a0 [pci_hotplug] [<a0000001003bb820>] pci_slot_attr_store+0x60/0xa0 [<a000000100240f70>] sysfs_write_file+0x230/0x2c0 [<a000000100195750>] vfs_write+0x190/0x2e0 [<a0000001001961a0>] sys_write+0x80/0x100 [<a00000010000c600>] ia64_ret_from_syscall+0x0/0x20 [<a000000000010720>] __kernel_syscall_via_break+0x0/0x20 The root cause of this oops is that the logical remove ("echo 1 > /sys/bus/pci/devices/$device/remove") destroyed the pci_dev. The pci_dev struct itself wasn't deallocated because acpiphp kept a reference, but some of its fields became invalid. acpiphp doesn't have any real reason to keep a pointer to a pci_dev around. It can always derive it using pci_get_slot(). If a logical remove destroys the pci_dev, acpiphp won't find it and is thus prevented from causing mischief. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Tested-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Reported-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-05-19PCI PM: Fix initialization and kexec breakage for some devicesRafael J. Wysocki
Recent PCI PM changes introduced a bug that causes some devices to be mishandled after kexec and during early initialization. The failure scenario in the kexec case is the following: * Assume a PCI device is not power-manageable by the platform and has PCI_PM_CTRL_NO_SOFT_RESET set in PMCSR. * The device is put into D3 before kexec (using the native PCI PM). * After kexec, pci_setup_device() sets the device's power state to PCI_UNKNOWN. * pci_set_power_state(dev, PCI_D0) is called by the device's driver. * __pci_start_power_transition(dev, PCI_D0) is called and since the device is not power-manageable by the platform, it causes pci_update_current_state(dev, PCI_D0) to be called. As a result the device's current_state field is updated to PCI_D3, in accordance with the contents of its PCI PM registers. * pci_raw_set_power_state() is called and it changes the device power state to D0. *However*, it should also call pci_restore_bars() to reinitialize the device, but it doesn't, because the device's current_state field has been modified earlier. To prevent this from happening, modify pci_platform_power_transition() so that it doesn't use pci_update_current_state() to update the current_state field for devices that aren't power-manageable by the platform. Instead, this field should be updated directly for devices that don't support the native PCI PM. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-05-18x86, apic: introduce io_apic_irq_attrYinghai Lu
according to Ingo, io_apic irq-setup related functions have too many parameters with a repetitive signature. So reduce related funcs to get less params by passing a pointer to a newly defined io_apic_irq_attr structure. v2: io_apic_irq ==> irq_attr triggering ==> trigger v3: add set_io_apic_irq_attr [ Impact: cleanup ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Len Brown <lenb@kernel.org> LKML-Reference: <4A08ACD3.2070401@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI MSI: Fix MSI-X with NIU cards PCI: Fix pci-e port driver slot_reset bad default return value
2009-05-12x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector(), fixCyrill Gorcunov
Fix trivial typo in the drivers/pci/hotplug/ibmphp_core.c changes. [ Impact: build fix ] Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> CC: Yinghai Lu <yinghai@kernel.org> Cc: eswierk@aristanetworks.com LKML-Reference: <20090512145128.GA10220@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-12Merge branch 'x86/apic' into irq/numaIngo Molnar
Merge reason: both topics modify the APIC code but were able to do it in parallel so far. An upcoming patch generates a conflict so merge them to avoid the conflict. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11PCI MSI: Fix MSI-X with NIU cardsMatthew Wilcox
The NIU device refuses to allow accesses to MSI-X registers before MSI-X is enabled. This patch fixes the problem by moving the read of the mask register to after MSI-X is enabled. Reported-by: David S. Miller <davem@davemloft.net> Tested-by: David S. Miller <davem@davemloft.net> Reviewed-by: David S. Miller <davem@davemloft.net> Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-05-11intel-iommu: PAE memory corruption fixDavid Woodhouse
PAGE_MASK is 0xFFFFF000 on i386 -- even with PAE. So it's not sufficient to ensure that you use phys_addr_t or uint64_t everywhere you handle physical addresses -- you also have to avoid using the construct 'addr & PAGE_MASK', because that will strip the high 32 bits of the address. This patch avoids that problem by using PHYSICAL_PAGE_MASK instead of PAGE_MASK where appropriate. It leaves '& PAGE_MASK' in a few instances that don't matter -- where it's being used on the virtual bus addresses we're dishing out, which are 32-bit anyway. Since PHYSICAL_PAGE_MASK is not present on other architectures, we have to define it (to PAGE_MASK) if it's not already defined. Maybe it would be better just to fix PAGE_MASK for i386/PAE? Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-11x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector()Yinghai Lu
To prepare those params for pcibios_irq_enable() to call setup_io_apic_routing(). [ Impact: extend function call API to prepare for new functionality ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Len Brown <lenb@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> LKML-Reference: <4A01C406.2040303@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11Merge commit 'v2.6.30-rc5' into x86/apicIngo Molnar
Merge reason: this branch was on a .30-rc2 base - sync it up with all the latest fixes. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-05PCI: Fix pci-e port driver slot_reset bad default return valueZhang, Yanmin
When an upstream port reports an AER error to root port, kernel starts error recovery procedures. The default return value of function pcie_portdrv_slot_reset is PCI_ERS_RESULT_NONE. If all port service drivers of the downstream port under the upstream port have no slot_reset method in pci_error_handlers, AER recovery would stop without resume. Below patch against 2.6.30-rc3 fixes it. Signed-off-by: Zhang Yanmin <yanmin.zhang@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-05-01Merge branch 'x86/apic' into irq/numaIngo Molnar
Conflicts: arch/x86/kernel/apic/io_apic.c Merge reason: non-trivial interaction between ongoing work in io_apic.c and the NUMA migration feature in the irq tree. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28irq: make ht irq_desc more numa awareYinghai Lu
Try to get irq_desc on the same node as create_irq_nr(). [ Impact: optimization, make HT IRQs more NUMA-aware ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Rusty Russell <rusty@rustcorp.com.au> LKML-Reference: <49F655B6.8020109@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28x86/irq: change irq_desc_alloc() to take node instead of cpuYinghai Lu
This simplifies the node awareness of the code. All our allocators only deal with a NUMA node ID locality not with CPU ids anyway - so there's no need to maintain (and transform) a CPU id all across the IRq layer. v2: keep move_irq_desc related [ Impact: cleanup, prepare IRQ code to be NUMA-aware ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jeremy Fitzhardinge <jeremy@goop.org> LKML-Reference: <49F65536.2020300@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-22PCI: only save/restore existent registers in the PCIe capabilityYu Zhao
PCIe 1.1 base neither requires the endpoint to implement the entire PCIe capability structure nor specifies default values of registers that are not implemented by the device. So we only save and restore registers that must be implemented by different device types if the device PCIe capability version is 1. PCIe 1.1 Capability Structure Expansion ECN and PCIe 2.0 requires all registers in the PCIe capability to be either implemented or hardwired to 0. Their PCIe capability version is 2. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-22docbooks: add/fix PCI kernel-docRandy Dunlap
Add drivers/pci/*.c source files to DocBook/kernel-api.tmpl and update those pci/*.c source files that need kernel-doc fixes. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-22PCI: cleanup debug output resourcesYinghai Lu
Remove outputs for 0 sized resources and indicate prefetchability. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-22x86/PCI: Move set_pci_bus_resources_arch_default into arch/x86Matthew Wilcox
Commit 30a18d6c3f1e774de656ebd8ff219d53e2ba4029 introduced a new function to set the PCI bus resources. Unfortunately, neither the author, nor the committers seemed to know that we already have somewhere to do that -- pcibios_fixup_bus(). This patch moves the hook (used only by the K8 code) into x86-specific code where it should have been in the first place. Cc: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-22PCI quirk: disable MSI on VIA VT3364 chipsetsThomas Renninger
Without this patch, Broadcom BCM5906 Ethernet controllers set up via MSI cause the machine to hang. Tejun agreed that the best is to blacklist the whole chipset and after adding it, seeing the other VIA quirks disabling MSI, this very much looks like the right way. Cc: <stable@kernel.org> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-19x86, intr-remap: add option to disable interrupt remappingWeidong Han
Add option "nointremap" to disable interrupt remapping. [ Impact: add new boot option ] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Weidong Han <weidong.han@intel.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Cc: iommu@lists.linux-foundation.org Cc: allen.m.kay@intel.com Cc: fenghua.yu@intel.com LKML-Reference: <1239957736-6161-5-git-send-email-weidong.han@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-19x86, intr-remap: enable interrupt remapping earlyWeidong Han
Currently, when x2apic is not enabled, interrupt remapping will be enabled in init_dmars(), where it is too late to remap ioapic interrupts, that is, ioapic interrupts are really in compatibility mode, not remappable mode. This patch always enables interrupt remapping before ioapic setup, it guarantees all interrupts will be remapped when interrupt remapping is enabled. Thus it doesn't need to set the compatibility interrupt bit. [ Impact: refactor intr-remap init sequence, enable fuller remap mode ] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Weidong Han <weidong.han@intel.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Cc: iommu@lists.linux-foundation.org Cc: allen.m.kay@intel.com Cc: fenghua.yu@intel.com LKML-Reference: <1239957736-6161-4-git-send-email-weidong.han@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-13Merge git://git.infradead.org/iommu-2.6Linus Torvalds
* git://git.infradead.org/iommu-2.6: intel-iommu: Avoid panic() for DRHD at address zero. Intel-IOMMU Alignment Issue in dma_pte_clear_range()
2009-04-10intel-iommu: Avoid panic() for DRHD at address zero.David Woodhouse
If the BIOS does something obviously stupid, like claiming that the registers for the IOMMU are at physical address zero, then print a nasty message and abort, rather than trying to set up the IOMMU and then later panicking. It's becoming more and more obvious that trusting this stuff to the BIOS was a mistake. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: pci_slot: grab refcount on slot's bus PCI Hotplug: acpiphp: grab refcount on p2p subordinate bus PCI: allow PCI core hotplug to remove PCI root bus PCI: Fix oops in pci_vpd_truncate PCI: don't corrupt enable_cnt when doing manual resource alignment PCI: annotate pci_rescan_bus as __ref, not __devinit PCI-IOV: fix missing kernel-doc PCI: Setup disabled bridges even if buses are added PCI: SR-IOV quirk for Intel 82576 NIC
2009-04-07dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)Yang Hongyang
Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07PCI: Fix oops in pci_vpd_truncateAnton Vorontsov
pci_vpd_truncate() should check for dev->vpd->attr, otherwise this might happen: sky2 driver version 1.22 Unable to handle kernel paging request for data at address 0x0000000c Faulting instruction address: 0xc01836fc Oops: Kernel access of bad area, sig: 11 [#1] [...] NIP [c01836fc] pci_vpd_truncate+0x38/0x40 LR [c029be18] sky2_probe+0x14c/0x518 Call Trace: [ef82bde0] [c029bda4] sky2_probe+0xd8/0x518 (unreliable) [ef82be20] [c018a11c] local_pci_probe+0x24/0x34 [ef82be30] [c018a14c] pci_call_probe+0x20/0x30 [ef82be50] [c018a330] __pci_device_probe+0x64/0x78 [ef82be60] [c018a44c] pci_device_probe+0x30/0x58 [ef82be80] [c01aa270] really_probe+0x78/0x1a0 [ef82bea0] [c01aa460] __driver_attach+0xa4/0xa8 [ef82bec0] [c01a96ac] bus_for_each_dev+0x60/0x9c [ef82bef0] [c01aa0b4] driver_attach+0x24/0x34 [ef82bf00] [c01a9e08] bus_add_driver+0x12c/0x1cc [ef82bf20] [c01aa87c] driver_register+0x6c/0x110 [ef82bf30] [c018a770] __pci_register_driver+0x4c/0x9c [ef82bf50] [c03782c8] sky2_init_module+0x30/0x40 [ef82bf60] [c0001dbc] do_one_initcall+0x34/0x1a0 [ef82bfd0] [c0362240] do_initcalls+0x38/0x58 This happens with CONFIG_SKY2=y, and "ip=on" kernel command line, so pci_vpd_truncate() is called before late_initcall(pci_sysfs_init), therefore ->attr isn't yet initialized. Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06Intel-IOMMU Alignment Issue in dma_pte_clear_range()Fenghua Yu
This issue was pointed out by Linus. In dma_pte_clear_range() in intel-iommu.c start = PAGE_ALIGN(start); end &= PAGE_MASK; npages = (end - start) / VTD_PAGE_SIZE; In partial page case, start could be bigger than end and npages will be negative. Currently the issue doesn't show up as a real bug in because start and end have been aligned to page boundary already by all callers. So the issue has been hidden. But it is dangerous programming practice. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-06Merge git://git.infradead.org/iommu-2.6Linus Torvalds
* git://git.infradead.org/iommu-2.6: drivers/pci/intr_remapping.c: include acpi.h intel-iommu: Fix oops in device_to_iommu() when devices not found. intel-iommu: Handle PCI domains appropriately. intel-iommu: Fix device-to-iommu mapping for PCI-PCI bridges. x2apic/intr-remap: decouple interrupt remapping from x2apic x86, dmar: check if it's initialized before disable queue invalidation intel-iommu: set compatibility format interrupt Intel IOMMU Suspend/Resume Support - Interrupt Remapping Intel IOMMU Suspend/Resume Support - Queued Invalidation Intel IOMMU Suspend/Resume Support - DMAR intel-iommu: Add for_each_iommu() and for_each_active_iommu() macros
2009-04-06drivers/pci/intr_remapping.c: include acpi.hAlexander Beregalov
Fix this build error: drivers/pci/intr_remapping.c: In function 'ir_parse_ioapic_scope': drivers/pci/intr_remapping.c:617: error: invalid use of undefined type 'struct acpi_dmar_hardware_unit' Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-06intel-iommu: Fix oops in device_to_iommu() when devices not found.David Woodhouse
It's possible for a device in the drhd->devices[] array to be NULL if it wasn't found at boot time, which means we have to check for that case. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-06PCI Hotplug: acpiphp: grab refcount on p2p subordinate busAlex Chiang
If a logical hot unplug (remove) is performed on a bridge claimed by acpiphp and then acpiphp is unloaded, we will encounter an oops. This is because acpiphp will access the bridge's subordinate bus, which was released by the user's prior hot unplug. The solution is to grab a reference on the subordinate PCI bus. This will prevent the bus from release until acpiphp is unloaded. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Tested-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Reported-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-06PCI: allow PCI core hotplug to remove PCI root busAlex Chiang
There is no reason to prevent removal of root bus devices. A subsequent rescan will find them just fine. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-06PCI: Fix oops in pci_vpd_truncateAnton Vorontsov
pci_vpd_truncate() should check for dev->vpd->attr, otherwise this might happen: sky2 driver version 1.22 Unable to handle kernel paging request for data at address 0x0000000c Faulting instruction address: 0xc01836fc Oops: Kernel access of bad area, sig: 11 [#1] [...] NIP [c01836fc] pci_vpd_truncate+0x38/0x40 LR [c029be18] sky2_probe+0x14c/0x518 Call Trace: [ef82bde0] [c029bda4] sky2_probe+0xd8/0x518 (unreliable) [ef82be20] [c018a11c] local_pci_probe+0x24/0x34 [ef82be30] [c018a14c] pci_call_probe+0x20/0x30 [ef82be50] [c018a330] __pci_device_probe+0x64/0x78 [ef82be60] [c018a44c] pci_device_probe+0x30/0x58 [ef82be80] [c01aa270] really_probe+0x78/0x1a0 [ef82bea0] [c01aa460] __driver_attach+0xa4/0xa8 [ef82bec0] [c01a96ac] bus_for_each_dev+0x60/0x9c [ef82bef0] [c01aa0b4] driver_attach+0x24/0x34 [ef82bf00] [c01a9e08] bus_add_driver+0x12c/0x1cc [ef82bf20] [c01aa87c] driver_register+0x6c/0x110 [ef82bf30] [c018a770] __pci_register_driver+0x4c/0x9c [ef82bf50] [c03782c8] sky2_init_module+0x30/0x40 [ef82bf60] [c0001dbc] do_one_initcall+0x34/0x1a0 [ef82bfd0] [c0362240] do_initcalls+0x38/0x58 This happens with CONFIG_SKY2=y, and "ip=on" kernel command line, so pci_vpd_truncate() is called before late_initcall(pci_sysfs_init), therefore ->attr isn't yet initialized. Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-06PCI: don't corrupt enable_cnt when doing manual resource alignmentYuji Shimada
This patch fixes breakage of of enable_cnt in quirk_resource_alignment. Currently, quirk_resource_alignment calls pci_disable_device. pci_disable_device decrements enable_cnt, so that enable_cnt becomes -1. The patch disables memory decoding, writing command register directly. So enable_cnt is not broken. Signed-off-by: Yuji Shimada <shimada-yxb@necst.nec.co.jp> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-06PCI: annotate pci_rescan_bus as __ref, not __devinitAlex Chiang
pci_rescan_bus was annotated as __devinit, which is wrong, because it will never be part of device initialization. Howevever, we can't simply drop the annotation, because then we get section warnings about calling pci_scan_child_bus (which is correctly marked as __devinit). pci_rescan_bus will only get built when CONFIG_HOTPLUG is set, meaning that __devinit is a nop, so we know that pci_scan_child_bus has not been freed. Annotate as __ref to silence modpost. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-06PCI-IOV: fix missing kernel-docRandy Dunlap
Fix PCI iov kernel-doc warning: Warning(drivers/pci/iov.c:638): No description found for parameter 'nr_virtfn' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-06PCI: Setup disabled bridges even if buses are addedYuji Shimada
This patch sets up disabled bridges even if buses have already been added. pci_assign_unassigned_resources is called after buses are added. pci_assign_unassigned_resources calls pci_bus_assign_resources. pci_bus_assign_resources calls pci_setup_bridge to configure BARs of bridges. Currently pci_setup_bridge returns immediately if the bus have already been added. So pci_assign_unassigned_resources can't configure BARs of bridges that were added in a disabled state; this patch fixes the issue. On logical hot-add, we need to prevent the kernel from re-initializing bridges that have already been initialized. To achieve this, pci_setup_bridge returns immediately if the bridge have already been enabled. We don't need to check whether the specified bus is a root bus or not. pci_setup_bridge is not called on a root bus, because a root bus does not have a bridge. The patch adds a new helper function, pci_is_enabled. I made the function name similar to pci_is_managed. The codes which use enable_cnt directly are changed to use pci_is_enabled. Acked-by: Alex Chiang <achiang@hp.com> Signed-off-by: Yuji Shimada <shimada-yxb@necst.nec.co.jp> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-06PCI: SR-IOV quirk for Intel 82576 NICYu Zhao
If BIOS doesn't allocate resources for the SR-IOV BARs, zero the Flash BAR and program the SR-IOV BARs to use the old Flash Memory Space. Please refer to Intel 82576 Gigabit Ethernet Controller Datasheet section 7.9.2.14.2 for details. http://download.intel.com/design/network/datashts/82576_Datasheet.pdf Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-05Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (140 commits) ACPI: processor: use .notify method instead of installing handler directly ACPI: button: use .notify method instead of installing handler directly ACPI: support acpi_device_ops .notify methods toshiba-acpi: remove MAINTAINERS entry ACPI: battery: asynchronous init acer-wmi: Update copyright notice & documentation acer-wmi: Cleanup the failure cleanup handling acer-wmi: Blacklist Acer Aspire One video: build fix thinkpad-acpi: rework brightness support thinkpad-acpi: enhanced debugging messages for the fan subdriver thinkpad-acpi: enhanced debugging messages for the hotkey subdriver thinkpad-acpi: enhanced debugging messages for rfkill subdrivers thinkpad-acpi: restrict access to some firmware LEDs thinkpad-acpi: remove HKEY disable functionality thinkpad-acpi: add new debug helpers and warn of deprecated atts thinkpad-acpi: add missing log levels thinkpad-acpi: cleanup debug helpers thinkpad-acpi: documentation cleanup thinkpad-acpi: drop ibm-acpi alias ...
2009-04-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumaskLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask: (36 commits) cpumask: remove cpumask allocation from idle_balance, fix numa, cpumask: move numa_node_id default implementation to topology.h, fix cpumask: remove cpumask allocation from idle_balance x86: cpumask: x86 mmio-mod.c use cpumask_var_t for downed_cpus x86: cpumask: update 32-bit APM not to mug current->cpus_allowed x86: microcode: cleanup x86: cpumask: use work_on_cpu in arch/x86/kernel/microcode_core.c cpumask: fix CONFIG_CPUMASK_OFFSTACK=y cpu hotunplug crash numa, cpumask: move numa_node_id default implementation to topology.h cpumask: convert node_to_cpumask_map[] to cpumask_var_t cpumask: remove x86 cpumask_t uses. cpumask: use cpumask_var_t in uv_flush_tlb_others. cpumask: remove cpumask_t assignment from vector_allocation_domain() cpumask: make Xen use the new operators. cpumask: clean up summit's send_IPI functions cpumask: use new cpumask functions throughout x86 x86: unify cpu_callin_mask/cpu_callout_mask/cpu_initialized_mask/cpu_sibling_setup_mask cpumask: convert struct cpuinfo_x86's llc_shared_map to cpumask_var_t cpumask: convert node_to_cpumask_map[] to cpumask_var_t x86: unify 32 and 64-bit node_to_cpumask_map ...
2009-04-05Merge branch 'linus' into releaseLen Brown
Conflicts: arch/x86/kernel/cpu/cpufreq/longhaul.c Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-04intel-iommu: Handle PCI domains appropriately.David Woodhouse
We were comparing {bus,devfn} and assuming that a match meant it was the same device. It doesn't -- the same {bus,devfn} can exist in multiple PCI domains. Include domain number in device identification (and call it 'segment' in most places, because there's already a lot of references to 'domain' which means something else, and this code is infected with ACPI thinking already). Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-04intel-iommu: Fix device-to-iommu mapping for PCI-PCI bridges.David Woodhouse
When the DMAR table identifies that a PCI-PCI bridge belongs to a given IOMMU, that means that the bridge and all devices behind it should be associated with the IOMMU. Not just the bridge itself. This fixes the device_to_iommu() function accordingly. (It's broken if you have the same PCI bus numbers in multiple domains, but this function was always broken in that way; I'll be dealing with that later). Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-04x2apic/intr-remap: decouple interrupt remapping from x2apicHan, Weidong
interrupt remapping must be enabled before enabling x2apic, but interrupt remapping doesn't depend on x2apic, it can be used separately. Enable interrupt remapping in init_dmars even x2apic is not supported. [dwmw2: Update Kconfig accordingly, fix build with INTR_REMAP && !X2APIC] Signed-off-by: Weidong Han <weidong.han@intel.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-04x86, dmar: check if it's initialized before disable queue invalidationHan, Weidong
If queue invalidation is disabled after it's already initialized, dmar_enable_qi won't re-enable it due to iommu->qi is allocated. It may result in system hang when use queue invalidation. Add this check to avoid this case. Signed-off-by: Weidong Han <weidong.han@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits) trivial: Update my email address trivial: NULL noise: drivers/mtd/tests/mtd_*test.c trivial: NULL noise: drivers/media/dvb/frontends/drx397xD_fw.h trivial: Fix misspelling of "Celsius". trivial: remove unused variable 'path' in alloc_file() trivial: fix a pdlfush -> pdflush typo in comment trivial: jbd header comment typo fix for JBD_PARANOID_IOFAIL trivial: wusb: Storage class should be before const qualifier trivial: drivers/char/bsr.c: Storage class should be before const qualifier trivial: h8300: Storage class should be before const qualifier trivial: fix where cgroup documentation is not correctly referred to trivial: Give the right path in Documentation example trivial: MTD: remove EOL from MODULE_DESCRIPTION trivial: Fix typo in bio_split()'s documentation trivial: PWM: fix of #endif comment trivial: fix typos/grammar errors in Kconfig texts trivial: Fix misspelling of firmware trivial: cgroups: documentation typo and spelling corrections trivial: Update contact info for Jochen Hein trivial: fix typo "resgister" -> "register" ...