aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)Author
2007-05-02pciehp: Adapt to device driver modelKenji Kaneshige
This patch adapts PCIEHP driver to PCI device driver model. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02pciehp: Event handling reworkKenji Kaneshige
The event handler of PCIEHP driver is unnecessarily very complex. In addition, current event handler can only a fixed number of events at the same time, and some of events would be lost if several number of events happened at the same time. This patch simplify the event handler using 'work queue', and it also fix the above-mentioned issue. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02pci: New PCI-E reset APIBrian King
Adds a new API which can be used to issue various types of PCI-E reset, including PCI-E warm reset and PCI-E hot reset. This is needed for an ipr PCI-E adapter which does not properly implement BIST. Running BIST on this adapter results in PCI-E errors. The only reliable reset mechanism that exists on this hardware is PCI Fundamental reset (warm reset). Since driving this type of reset is architecture unique, this provides the necessary hooks for architectures to add this support. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Acked-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02PCI: Flush MSI-X table writesMitch Williams
This patch fixes a kernel bug which is triggered when using the irqbalance daemon with MSI-X hardware. Because both MSI-X interrupt messages and MSI-X table writes are posted, it's possible for them to cross while in-flight. This results in interrupts being received long after the kernel thinks they're disabled, and in interrupts being sent to stale vectors after rebalancing. This patch performs a read flush after writes to the MSI-X table for mask and unmask operations. Since the SMP affinity is set while the interrupt is masked, and since it's unmasked immediately after, no additional flushes are required in the various affinity setting routines. This patch has been validated with (unreleased) network hardware which uses MSI-X. Revised with input from Eric Biederman. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02remove "struct subsystem" as it is no longer neededGreg Kroah-Hartman
We need to work on cleaning up the relationship between kobjects, ksets and ktypes. The removal of 'struct subsystem' is the first step of this, especially as it is not really needed at all. Thanks to Kay for fixing the bugs in this patch. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-29Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (86 commits) SPIN_LOCK_UNLOCKED cleanup in drivers/ata/pata_winbond.c drivers/ata/pata_cmd640.c: fix build with CONFIG_PM=n pata_hpt37x: Further small fixes pata_hpt3x2n: Add HPT371N support and other bits ata: printk warning fixes libata: separate ATA_EHI_DID_RESET into DID_SOFTRESET and DID_HARDRESET ahci: consolidate common port flags ata_timing: ensure t->cycle is always correct libata: add missing call to ->cable_detect() in new EH path pata_amd: remove contamination added during cable_detect conversion libata: Handle drives that require a spin-up command before first access libata: HPA support libata: kill probe_ent and related helpers libata: convert the remaining PATA drivers to new init model libata: convert the remaining SATA drivers to new init model libata: convert ata_pci_init_native_mode() users to new init model libata: convert drivers with combined SATA/PATA ports to new init model libata: add init helpers including ata_pci_prepare_native_host() libata: convert native PCI host handling to new init model libata: convert legacy PCI host handling to new init model ...
2007-04-29Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (105 commits) sonypi: use mutex instead of semaphore sony-laptop: remove user visible camera controls as platform attributes meye: make meye use sony-laptop instead of sonypi sony-laptop: add a meye-usable include file for camera ops sony-laptop: complete the motion eye camera support in sony-laptop sonypi: try to detect if sony-laptop has already taken one of the known ioports sonypi: suggest sonypi users to try sony-laptop instead sony-laptop: add edge modem support (also called WWAN) sony-laptop: add locking on accesses to the ioport and global vars sony-laptop: add camera enable/disable parameter, better handle possible infinite loop thinkpad-acpi: make drivers/misc/thinkpad_acpi:fan_mutex static ACPI: thinkpad-acpi: add sysfs support to wan and bluetooth subdrivers ACPI: thinkpad-acpi: add sysfs support to hotkey subdriver ACPI: thinkpad-acpi: improve dock subdriver initialization ACPI: thinkpad-acpi: improve debugging for acpi helpers ACPI: thinkpad-acpi: improve fan control documentation ACPI: thinkpad-acpi: map ENXIO to EINVAL for fan sysfs ACPI: thinkpad-acpi: fix a fan watchdog invocation ACPI: thinkpad-acpi: do not arm fan watchdog if it would not work ACPI: thinkpad-acpi: add a fan-control feature master toggle ...
2007-04-28libata/IDE: remove combined mode quirkJeff Garzik
Both old-IDE and libata should be able handle all controllers and devices found using normal resource reservation methods. This eliminates the awful, low-performing split-driver configuration where old-IDE drove the PATA portion of a PCI device, in PIO-only mode, and libata drove the SATA portion of the /same/ PCI device, in DMA mode. Typically vendors would ship SATA hard drive / PATA optical configuration, which would lend itself to slow (PIO-only) CD-ROM performance. For Intel users running in combined mode, it is now wholly dependent on your driver choice (potentially link order, if you compile both drivers in) whether old-IDE or libata will drive your hardware. In either case, you will get full performance from both SATA and PATA ports now, without having to pass a kernel command line parameter. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-27define platform wakeup hook, use in pci_enable_wake()David Brownell
This defines a platform hook to enable/disable a device as a wakeup event source. It's initially for use with ACPI, but more generally it could be used whenever enable_irq_wake()/disable_irq_wake() don't suffice. The hook is called -- if available -- inside pci_enable_wake(); and the semantics of that call are enhanced so that support for PCI PME# is no longer needed. It can now work for devices with "legacy PCI PM", when platform support allows it. (That support would use some board-specific signal for for the same purpose as PME#.) [akpm@linux-foundation.org: Make it compile with CONFIG_PM=n] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27driver core: per-subsystem multithreaded probingCornelia Huck
Make multithreaded probing work per subsystem instead of per driver. It doesn't make much sense to probe the same device for multiple drivers in parallel (after all, only one driver can bind to the device). Instead, create a probing thread for each device that probes the drivers one after another. Also make the decision to use multi-threaded probe per bus instead of per device and adapt the pci code. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-25ACPI: Disable MSI on request of FADTShaohua Li
The ACPI spec defines the bit and Microsoft uses it, so Linux must use it too. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-23Revert "adjust legacy IDE resource setting (v2)"Bartlomiej Zolnierkiewicz
This reverts commit ed8ccee0918ad063a4741c0656fda783e02df627. It causes hang on boot for some users and we don't yet know why: http://bugzilla.kernel.org/show_bug.cgi?id=7562 http://lkml.org/lkml/2007/4/20/404 http://lkml.org/lkml/2007/3/25/113 Just reverse it for 2.6.21-final, having broken X server is somehow better than unbootable system. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-04-03[PATCH] msi: synchronously mask and unmask msi-x irqs.Eric W. Biederman
This is a simplified and actually more comprehensive form of a bug fix from Mitch Williams <mitch.a.williams@intel.com>. When we mask or unmask a msi-x irqs the writes may be posted because we are writing to memory mapped region. This means the mask and unmask don't happen immediately but at some unspecified time in the future. Which is out of sync with how the mask/unmask logic work for ioapic irqs. The practical result is that we get very subtle and hard to track down irq migration bugs. This patch performs a read flush after writes to the MSI-X table for mask and unmask operations. Since the SMP affinity is set while the interrupt is masked, and since it's unmasked immediately after, no additional flushes are required in the various affinity setting routines. The testing by Mitch Williams on his especially problematic system should still be valid as I have only simplified the code, not changed the functionality. We currently have 7 drivers: cciss, mthca, cxgb3, forceth, s2io, pcie/portdrv_core, and qla2xxx in 2.6.21 that are affected by this problem when the hardware they driver is plugged into the right slot. Given the difficulty of reproducing this bug and tracing it down to anything that even remotely resembles a cause, even if people are being affected we aren't likely to see many meaningful bug reports, and the people who see this bug aren't likely to be able to reproduce this bug in a timely fashion. So it is best to get this problem fixed as soon as we can so people don't have problems. Then if people do have a kernel message stating "No irq for vector" we will know it is yet another novel cause that needs a complete new investigation. Cc: Greg KH <greg@kroah.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-26PCI: Fix warning message in PCIE port driverPrarit Bhargava
PCIE error output should conform to vendor_id:device_id. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-26PCI: Stop unhiding the SMBus on Toshiba laptopsJean Delvare
It was found that the Toshiba laptops with hidden Intel SMBus have SMM code handling the thermal management which accesses the SMBus. Thus it is not safe to unhide it and let Linux access it. We have to leave the SMBus hidden. SMM is a pain, really. This fixes bugs #6315 and #6395, for good this time. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-12[PATCH] pci: Repair pci_save/restore_state so we can restore one save many ↵Eric W. Biederman
times. Because we do not reserve space for the pci-x and pci-e state in struct pci dev we need to dynamically allocate it. However because we need to support restore being called multiple times after a single save it is never safe to free the buffers we have allocated to hold the state. So this patch modifies the save routines to first check to see if we have already allocated a state buffer before allocating a new one. Then the restore routines are modified to not free the state after restoring it. Simple and it fixes some subtle error path handling bugs, that are hard to test for. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-12[PATCH] msi: Safer state caching.Eric W. Biederman
There are two ways pci_save_state and pci_restore_state are used. As helper functions during suspend/resume, and as helper functions around a hardware reset event. When used as helper functions around a hardware reset event there is no reason to believe the calls will be paired, nor is there a good reason to believe that if we restore the msi state from before the reset that it will match the current msi state. Since arch code may change the msi message without going through the driver, drivers currently do not have enough information to even know when to call pci_save_state to ensure they will have msi state in sync with the other kernel irq reception data structures. It turns out the solution is straight forward, cache the state in the existing msi data structures (not the magic pci saved things) and have the msi code update the cached state each time we write to the hardware. This means we never need to read the hardware to figure out what the hardware state should be. By modifying the caching in this manner we get to remove our save_state routines and only need to provide restore_state routines. The only fields that were at all tricky to regenerate were the msi and msi-x control registers and the way we regenerate them currently is a bit dependent upon assumptions on how we use the allow msi registers to be configured and used making the code a little bit brittle. If we ever change what cases we allow or how we configure the msi bits we can address the fragility then. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-09pci: fix section mismatch warningSam Ravnborg
drivers/pci/search.c caused following section mismatch warning (if compiled with CONFIG_HOTPLUG=n): WARNING: drivers/pci/built-in.o - Section mismatch: reference to .init.text: from .text.pci_find_bus after 'pci_find_bus' (at offset 0x24) This was due to pci_find_bus() calling a function marked __devinit. Fix was to remove the __devinit from the offending function. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09PCI: aer: fix section mismatch warningSam Ravnborg
Fix following section mismatch warning (when compiled with CONFIG_HOTPLUG=n): WARNING: drivers/pci/built-in.o - Section mismatch: reference to .init.text:aer_probe from .data between 'aerdrv' (at offset 0x1608) and 'aer_error_handlers' Warning was fixed by renaming aerdrv to aerdriver so we pass the whitelist. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09pcie: fix section mismatch warningSam Ravnborg
Fix following section mismatch warning (when compiled with CONFIG_HOTPLUG=n): WARNING: drivers/pci/built-in.o - Section mismatch: reference to .init.text:pcie_portdrv_probe from .data between 'pcie_portdrv' (at offset 0xe40) and 'pcie_portdrv_err_handler' This warning was fixed by renaming pcie_portdrv to pcie_portdriver so we pass the whitelist. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09PCI: allow multiple calls to pcim_pin_device()Tejun Heo
Sanity check in pcim_pin_device() was too restrictive in that it didn't allow multiple calls to the function, which is against the devres philosohpy of fire-and-forget. Track pinned status separately and allow pinning multiple times. Signed-off-by: Tejun Heo <htejun@gmail.com> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-05[PATCH] msi: support masking msi irqs without a mask bitEric W. Biederman
For devices that do not support msi-x we only support 1 interrupt. Therefore we can disable that one interrupt by disabling the msi capability itself. If we leave the intx interrupts disabled while we have the msi capability disabled no interrupts should be delivered from that device. Devices with just the minimal msi support (and thus hitting this code path) include things like the intel e1000 nic, so it looks like is going to be a fairly common case and thus important to get right. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-05[PATCH] msi: fix up the msi enable/disable logicEric W. Biederman
enable/disable_msi_mode have several side effects which keeps them from being generally useful. So this patch replaces them with with two much more targeted functions: msi_set_enable and msix_set_enable. This patch makes pci_dev->msi_enabled and pci_dev->msix_enabled the definitive way to test if linux has enabled the msi capability, and has the appropriate msi data structures set up. This patch ensures that while writing the msi messages in save/restore and during device initialization we have the msi capability disabled so we don't get into races. The pci spec requires that we do not have the msi capability enabled and the msi messages unmasked while we write the messages. Completely disabling the capability is overkill but it is easy :) Care has been taken so we never have both a msi capability and intx enabled simultaneously. We haven't run into a problem yet but better safe then sorry. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-05[PATCH] msi: sanely support hardware level msi disablingEric W. Biederman
In some cases when we are not using msi we need a way to ensure that the hardware does not have an msi capability enabled. Currently the code has been calling disable_msi_mode to try and achieve that. However disable_msi_mode has several other side effects and is only available when msi support is compiled in so it isn't really appropriate. Instead this patch implements pci_msi_off which disables all msi and msix capabilities unconditionally with no additional side effects. pci_disable_device was redundantly clearing the bus master enable flag and clearing the msi enable bit. A device that is not allowed to perform bus mastering operations cannot generate intx or msi interrupt messages as those are essentially a special case of dma, and require bus mastering. So the call in pci_disable_device to disable msi capabilities was redundant. quirk_pcie_pxh also called disable_msi_mode and is updated to use pci_msi_off. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-03adjust legacy IDE resource setting (v2)Jan Beulich
The change to force legacy mode IDE channels' resources to fixed non-zero values confuses (at least some versions of) X, because the values reported by the kernel and those readable from PCI config space aren't consistent anymore. Therefore, this patch arranges for the respective BARs to also get updated if possible. Signed-off-by: Jan Beulich <jbeulich@novell.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-03-01ahci/pata_jmicron: match class not function numberTejun Heo
Make jmiron_ata quirk update pdev->class after programming the device and update ahci and pata_jmicron such that they match class code instead of checking function number manually. For ahci, it matches for vendor and class. For pata_jmicron, it matches vendor, device and class as IDE class isn't as well defined as AHCI class. This makes jmicron device matching more conventional and script friendly. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-01jmicron ATA: reimplement jmicron ATA quirkTejun Heo
Reimplement jmicron ATA quirk. * renamed to quirk_jmicron_ata() * quirk is invoked only for the affected controllers * programming is stricter. e.g. conf5 bit24 is cleared if unnecessary. * code factored for readability * JMB360 and JMB368 are programmed into proper mode Verified on JMB360, 363 and 368. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (25 commits) Documentation/kernel-docs.txt update. arch/cris: typo in KERN_INFO Storage class should be before const qualifier kernel/printk.c: comment fix update I/O sched Kconfig help texts - CFQ is now default, not AS. Remove duplicate listing of Cris arch from README kbuild: more doc. cleanups doc: make doc. for maxcpus= more visible drivers/net/eexpress.c: remove duplicate comment add a help text for BLK_DEV_GENERIC correct a dead URL in the IP_MULTICAST help text fix the BAYCOM_SER_HDX help text fix SCSI_SCAN_ASYNC help text trivial documentation patch for platform.txt Fix typos concerning hierarchy Fix comment typo "spin_lock_irqrestore". Fix misspellings of "agressive". drivers/scsi/a100u2w.c: trivial typo patch Correct trivial typo in log2.h. Remove useless FIND_FIRST_BIT() macro from cardbus.c. ...
2007-02-17Fix typos concerning hierarchyUwe Kleine-König
heirarchical, hierachical -> hierarchical heirarchy, hierachy -> hierarchy Signed-off-by: Uwe Kleine-König <zeisberg@informatik.uni-freiburg.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-16PCI: Make PCI device numa-node attribute visible in sysfsBrice Goglin
Export the numa-node attribute of PCI devices in sysfs so that user applications may choose where to be placed accordingly. Signed-off-by: Brice Goglin <Brice.Goglin@ens-lyon.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16PCI: PCI devices get assigned redundant IRQsAndreas Block
I'm currently working on a port to a CPCI board with a MPC5200. When testing the PCI interrupt routing, I discovered the following: Even devices which don't use interrupts (-> PCI Spec.: Interrupt Pin Register is zero), get an interrupt assigned (this is at least true for most of the PPC-targets I looked at). The cause is pretty obvious in drivers/pci/setup-irq.c. I guess at least in an ideal world with correctly designed hardware, the code should rather look as in the patch below. Of course it doesn't hurt anybody to have an unuseable IRQ assigned to a PCI-to-PCI-bridge (or something alike), but to me it seems a bit strange. Please correct me, if I'm mislead. The patch below is tested on the above mentioned CPCI-MPC5200 board and is compiler tested with the latest git-repository kernel on x86. Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16PCI: Make CARDBUS_MEM_SIZE and CARDBUS_IO_SIZE boot optionsAtsushi Nemoto
CARDBUS_MEM_SIZE was increased to 64MB on 2.6.20-rc2, but larger size might result in allocation failure for the reserving itself on some platforms (for example typical 32bit MIPS). Make it (and CARDBUS_IO_SIZE too) customizable by "pci=" option for such platforms. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Daniel Ritz <daniel.ritz@gmx.ch> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16PCI/sysfs/kobject kernel-doc fixesRandy Dunlap
Fix kernel-doc warnings in PCI, sysfs, and kobject files. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-14[PATCH] Scheduled removal of SA_xxx interrupt flags fixupsThomas Gleixner
The obsolete SA_xxx interrupt flags have been used despite the scheduled removal. Fixup the remaining users. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Roland Dreier <rolandd@cisco.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Cc: Dave Airlie <airlied@linux.ie> Cc: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] remove many unneeded #includes of sched.hTim Schmielau
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] mark struct file_operations const 5Arjan van de Ven
Many struct file_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10[SPARC64]: Add PCI MSI support on Niagara.David S. Miller
This is kind of hokey, we could use the hardware provided facilities much better. MSIs are assosciated with MSI Queues. MSI Queues generate interrupts when any MSI assosciated with it is signalled. This suggests a two-tiered IRQ dispatch scheme: MSI Queue interrupt --> queue interrupt handler MSI dispatch --> driver interrupt handler But we just get one-level under Linux currently. What I'd like to do is possibly stick the IRQ actions into a per-MSI-Queue data structure, and dispatch them form there, but the generic IRQ layer doesn't provide a way to do that right now. So, the current kludge is to "ACK" the interrupt by processing the MSI Queue data structures and ACK'ing them, then we run the actual handler like normal. We are wasting a lot of useful information, for example the MSI data and address are provided with ever MSI, as well as a system tick if available. If we could pass this into the IRQ handler it could help with certain things, in particular for PCI-Express error messages. The MSI entries on sparc64 also tell you exactly which bus/device/fn sent the MSI, which would be great for error handling when no registered IRQ handler can service the interrupt. We override the disable/enable IRQ chip methods in sun4v_msi, so we have to call {mask,unmask}_msi_irq() directly from there. This is another ugly wart. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09devres: device resource managementTejun Heo
Implement device resource management, in short, devres. A device driver can allocate arbirary size of devres data which is associated with a release function. On driver detach, release function is invoked on the devres data, then, devres data is freed. devreses are typed by associated release functions. Some devreses are better represented by single instance of the type while others need multiple instances sharing the same release function. Both usages are supported. devreses can be grouped using devres group such that a device driver can easily release acquired resources halfway through initialization or selectively release resources (e.g. resources for port 1 out of 4 ports). This patch adds devres core including documentation and the following managed interfaces. * alloc/free : devm_kzalloc(), devm_kzfree() * IO region : devm_request_region(), devm_release_region() * IRQ : devm_request_irq(), devm_free_irq() * DMA : dmam_alloc_coherent(), dmam_free_coherent(), dmam_declare_coherent_memory(), dmam_pool_create(), dmam_pool_destroy() * PCI : pcim_enable_device(), pcim_pin_device(), pci_is_managed() * iomap : devm_ioport_map(), devm_ioport_unmap(), devm_ioremap(), devm_ioremap_nocache(), devm_iounmap(), pcim_iomap_table(), pcim_iomap(), pcim_iounmap() Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-09Add pci class code for SATA & AHCI, and replace some magic numbers.Conke Hu
Signed-off-by: Conke Hu <conke.hu@amd.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-07Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: (23 commits) ide-acpi support warning fix ACPI support for IDE devices IDE Driver for Delkin/Lexar/etc.. cardbus CF adapter ide: it8213 IDE driver update (version 2) ide: add it8213 IDE driver tc86c001: add missing __init tag for tc86c001_ide_init() tc86c001: mark init_chipset_tc86c001() with __devinit tag tc86c001: init_hwif_tc86c001() can be static ide: add Toshiba TC86C001 IDE driver (take 2) pdc202xx_new: remove check_in_drive_lists abomination pdc202xx_new: remove useless code slc90e66: carry over fixes from piix driver piix: tuneproc() fixes/cleanups piix: fix 82371MX enablebits hpt366: HPT36x PCI clock detection fix hpt366: init code rewrite hpt366: clean up DMA timeout handling for HPT370 hpt366: merge HPT37x speedproc handlers hpt366: cache channel's MCR address hpt366: switch to using pci_get_slot ...
2007-02-07Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (41 commits) Revert "PCI: remove duplicate device id from ata_piix" msi: Make MSI useable more architectures msi: Kill the msi_desc array. msi: Remove attach_msi_entry. msi: Fix msi_remove_pci_irq_vectors. msi: Remove msi_lock. msi: Kill msi_lookup_irq MSI: Combine pci_(save|restore)_msi/msix_state MSI: Remove pci_scan_msi_device() MSI: Replace pci_msi_quirk with calls to pci_no_msi() PCI: remove duplicate device id from ipr PCI: remove duplicate device id from ata_piix PCI: power management: remove noise on non-manageable hw PCI: cleanup MSI code PCI: make isa_bridge Alpha-only PCI: remove quirk_sis_96x_compatible() PCI: Speed up the Intel SMBus unhiding quirk PCI Quirk: 1k I/O space IOBL_ADR fix on P64H2 shpchp: delete trailing whitespace shpchp: remove DBG_XXX_ROUTINE ...
2007-02-07Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (28 commits) sysfs: Shadow directory support Driver Core: Increase the default timeout value of the firmware subsystem Driver core: allow to delay the uevent at device creation time Driver core: add device_type to struct device Driver core: add uevent vars for devices of a class SYSFS: Fix missing include of list.h in sysfs.h HOWTO: Add a reference to Harbison and Steele sysfs: error handling in sysfs, fill_read_buffer() kobject: kobject_put cleanup sysfs: kobject_put cleanup sysfs: suppress lockdep warnings Driver core: fix race in sysfs between sysfs_remove_file() and read()/write() driver core: Change function call order in device_bind_driver(). driver core: Don't stop probing on ->probe errors. driver core fixes: device_register() retval check in platform.c driver core fixes: make_class_name() retval checks /sys/modules/*/holders USB: add the sysfs driver name to all modules SERIO: add the sysfs driver name to all modules PCI: add the sysfs driver name to all modules ...
2007-02-07msi: Make MSI useable more architecturesEric W. Biederman
The arch hooks arch_setup_msi_irq and arch_teardown_msi_irq are now responsible for allocating and freeing the linux irq in addition to setting up the the linux irq to work with the interrupt. arch_setup_msi_irq now takes a pci_device and a msi_desc and returns an irq. With this change in place this code should be useable by all platforms except those that won't let the OS touch the hardware like ppc RTAS. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07msi: Kill the msi_desc array.Eric W. Biederman
We need to be able to get from an irq number to a struct msi_desc. The msi_desc array in msi.c had several short comings the big one was that it could not be used outside of msi.c. Using irq_data in struct irq_desc almost worked except on some architectures irq_data needs to be used for something else. So this patch adds a msi_desc pointer to irq_desc, adds the appropriate wrappers and changes all of the msi code to use them. The dynamic_irq_init/cleanup code was tweaked to ensure the new field is left in a well defined state. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07msi: Remove attach_msi_entry.Eric W. Biederman
The attach_msi_entry has been reduced to a single simple assignment, so for simplicity remove the abstraction and directory perform the assignment. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07msi: Fix msi_remove_pci_irq_vectors.Eric W. Biederman
Since msi_remove_pci_irq_vectors is designed to be called during hotplug remove it is actively wrong to query the hardware and expect meaningful results back. To that end remove the pci_find_capability calls. Testing dev->msi_enabled and dev->msix_enabled gives us all of the information we need. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07msi: Remove msi_lock.Eric W. Biederman
With the removal of msi_lookup_irq all of the functions using msi_lock operated on a single device and none of them could reasonably be called on that device at the same time. Since what little synchronization that needs to happen needs to happen outside of the msi functions, msi_lock could never be contended and as such is useless and just complicates the code. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07msi: Kill msi_lookup_irqEric W. Biederman
The function msi_lookup_irq was horrible. As a side effect of running it changed dev->irq, and then the callers would need to change it back. In addition it does a global scan through all of the irqs, which seems to be the sole justification of the msi_lock. To remove the neede for msi_lookup_irq I added first_msi_irq to struct pci_dev. Then depending on the context I replaced msi_lookup_irq with dev->first_msi_irq, dev->msi_enabled, or dev->msix_enabled. msi_enabled and msix_enabled were already present in pci_dev for other reasons. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07MSI: Combine pci_(save|restore)_msi/msix_stateMichael Ellerman
The PCI save/restore code doesn't need to care about MSI vs MSI-X, all it really wants is to say "save/restore all MSI(-X) info for this device". This is borne out in the code, we call the MSI and MSI-X save routines side by side, and similarly with the restore routines. So combine the MSI/MSI-X routines into pci_save_msi_state() and pci_restore_msi_state(). It is up to those routines to decide what state needs to be saved. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07MSI: Remove pci_scan_msi_device()Michael Ellerman
pci_scan_msi_device() doesn't do anything anymore, so remove it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>