aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)Author
2008-04-22Fix cardbus resource allocationLinus Torvalds
Commit 884525655d07fdee9245716b998ecdc45cdd8007 ("PCI: clean up resource alignment management") didn't set the alignment information for the cardbus window resources, causing their subsequent allocations to fail miserably with a message like yenta_cardbus 0000:15:00.0: device not available because of BAR 7 [100:1ff] collisions yenta_cardbus: probe of 0000:15:00.0 failed with error -16 or similar. This fixes it and clarifies the code a bit too (we used to have to use the insane PCI bridge alignment logic that put the alignment in the "start" field, this makes it use the slightly easier-to-understand size-based alignment, and allows us to set the resource start to zero until it gets allocated). Reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6: (42 commits) PCI: Change PCI subsystem MAINTAINER PCI: pci-iommu-iotlb-flushing-speedup PCI: pci_setup_bridge() mustn't be __devinit PCI: pci_bus_size_cardbus() mustn't be __devinit PCI: pci_scan_device() mustn't be __devinit PCI: pci_alloc_child_bus() mustn't be __devinit PCI: replace remaining __FUNCTION__ occurrences PCI: Hotplug: fakephp: Return success, not ENODEV, when bus rescan is triggered PCI: Hotplug: Fix leaks in IBM Hot Plug Controller Driver - ibmphp_init_devno() PCI: clean up resource alignment management PCI: aerdrv_acpi.c: remove unneeded NULL check PCI: Update VIA CX700 quirk PCI: Expose PCI VPD through sysfs PCI: iommu: iotlb flushing PCI: simplify quirk debug output PCI: iova RB tree setup tweak PCI: parisc: use generic pci_enable_resources() PCI: ppc: use generic pci_enable_resources() PCI: powerpc: use generic pci_enable_resources() PCI: ia64: use generic pci_enable_resources() ...
2008-04-20PCI: pci-iommu-iotlb-flushing-speedupmark gross
The following patch is an update to use an array instead of a list of IOVA's in the implementation of defered iotlb flushes. It takes inspiration from sba_iommu.c I like this implementation better as it encapsulates the batch process within intel-iommu.c, and no longer touches iova.h (which is shared) Performance data: Netperf 32byte UDP streaming 2.6.25-rc3-mm1: IOMMU-strict : 58Mps @ 62% cpu NO-IOMMU : 71Mbs @ 41% cpu List-based IOMMU-default-batched-IOTLB flush: 66Mbps @ 57% cpu with this patch: IOMMU-strict : 73Mps @ 75% cpu NO-IOMMU : 74Mbs @ 42% cpu Array-based IOMMU-default-batched-IOTLB flush: 72Mbps @ 62% cpu Signed-off-by: <mgross@linux.intel.com> Cc: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: pci_setup_bridge() mustn't be __devinitAdrian Bunk
WARNING: drivers/pci/built-in.o(.text+0x28ee9): Section mismatch in reference from the function pci_bus_assign_resources() to the function .devinit.text:pci_setup_bridge() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: pci_bus_size_cardbus() mustn't be __devinitAdrian Bunk
WARNING: drivers/pci/built-in.o(.text+0x28e1f): Section mismatch in reference from the function pci_bus_size_bridges() to the function .devinit.text:pci_bus_size_cardbus() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: pci_scan_device() mustn't be __devinitAdrian Bunk
WARNING: drivers/pci/built-in.o(.text+0x150f): Section mismatch in reference from the function pci_scan_single_device() to the function .devinit.text:pci_scan_device() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: pci_alloc_child_bus() mustn't be __devinitAdrian Bunk
WARNING: drivers/pci/built-in.o(.text+0xc4c): Section mismatch in reference from the function pci_add_new_bus() to the function .devinit.text:pci_alloc_child_bus() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: Hotplug: fakephp: Return success, not ENODEV, when bus rescan is triggeredTrent Piepho
The 'power' attribute of the fakephp driver originally only let one turn a slot off. If one tried to turn a slot on (echo 1 > .../power), it would return ENODEV, as fakephp did not support this function. An old (pre-git) patch changed this: 2004/11/11 16:33:31-08:00 jdittmer [PATCH] fakephp: add pci bus rescan ability http://article.gmane.org/gmane.linux.kernel/251183 Now writing "1" to the power attribute has the effect of triggering a bus rescan, but it still returns ENODEV, probably an oversight in the above patch. Using the BusyBox echo will not produce an error message, but will trigger *two* bus rescans (and return an exit code of 1): ~ # strace echo -n 1 > /sys/bus/pci/slots/0000:00:00.0/power ... write(1, "1", 1) = -1 ENODEV (No such device) write(1, "1", 1) = -1 ENODEV (No such device) exit(1) = ? Using cp gives a write error, even though the write did happen and a rescan was triggered: ~ # echo -n 1 > tmp ; cp tmp /sys/bus/pci/slots/0000:00:00.0/power cp: Write Error: No such device It seems much better to return success instead of failure. The actual status of the bus rescan is hard to return. It happens asynchronously in a work thread, so the sysfs store functions returns before any status is ready (the whole point of the work queue). And even if it didn't do this, the rescan doesn't have any clear status to return. Signed-off-by: Trent Piepho <tpiepho@freescale.com> CC: Jan Dittmer <jdittmer@ppp0.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: Hotplug: Fix leaks in IBM Hot Plug Controller Driver - ibmphp_init_devno()Jesper Juhl
In drivers/pci/hotplug/ibmphp_core.c::ibmphp_init_devno() we allocate space dynamically for a PCI irq routing table by calling pcibios_get_irq_routing_table(), but we never free the allocated space. This patch frees the allocated space at the function exit points. Spotted by the Coverity checker. Compile tested only. Please consider applying. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: clean up resource alignment managementIvan Kokshaysky
Done per Linus' request and suggestions. Linus has explained that better than I'll be able to explain: On Thu, Mar 27, 2008 at 10:12:10AM -0700, Linus Torvalds wrote: > Actually, before we go any further, there might be a less intrusive > alternative: add just a couple of flags to the resource flags field (we > still have something like 8 unused bits on 32-bit), and use those to > implement a generic "resource_alignment()" routine. > > Two flags would do it: > > - IORESOURCE_SIZEALIGN: size indicates alignment (regular PCI device > resources) > > - IORESOURCE_STARTALIGN: start field is alignment (PCI bus resources > during probing) > > and then the case of both flags zero (or both bits set) would actually be > "invalid", and we would also clear the IORESOURCE_STARTALIGN flag when we > actually allocate the resource (so that we don't use the "start" field as > alignment incorrectly when it no longer indicates alignment). > > That wouldn't be totally generic, but it would have the nice property of > automatically at least add sanity checking for that whole "res->start has > the odd meaning of 'alignment' during probing" and remove the need for a > new field, and it would allow us to have a generic "resource_alignment()" > routine that just gets a resource pointer. Besides, I removed IORESOURCE_BUS_HAS_VGA flag which was unused for ages. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Gary Hade <garyhade@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: aerdrv_acpi.c: remove unneeded NULL checkAdrian Bunk
There's no reason for checking pdev->bus for being NULL here (and we'd anyway Oops 3 lines below if it was). Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: Update VIA CX700 quirkTim Yamin
This follows up 53a9bf4267b8b1f958dbeb7c8c1ef21c82229b71. Some newer CX700 BIOSes from our vendor have PCI Bus Parking disabled but PCI Master read caching enabled. This creates problems such as system freezing when both the network controller and the USB controller are active and one of them is pretty busy (e.g. heavy network traffic). This patch separates the checks and both the bus parking and the read caching are disabled independently if either is enabled by the BIOS. Signed-off-by: Tim Yamin <tim.yamin@zonbu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: Expose PCI VPD through sysfsBen Hutchings
Vital Product Data (VPD) may be exposed by PCI devices in several ways. It is generally unsafe to read this information through the existing interfaces to user-land because of stateful interfaces. This adds: - abstract operations for VPD access (struct pci_vpd_ops) - VPD state information in struct pci_dev (struct pci_vpd) - an implementation of the VPD access method specified in PCI 2.2 (in access.c) - a 'vpd' binary file in sysfs directories for PCI devices with VPD operations defined It adds a probe for PCI 2.2 VPD in pci_scan_device() and release of VPD state in pci_release_dev(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: iommu: iotlb flushingmark gross
This patch is for batching up the flushing of the IOTLB for the DMAR implementation found in the Intel VT-d hardware. It works by building a list of to be flushed IOTLB entries and a bitmap list of which DMAR engine they are from. After either a high water mark (250 accessible via debugfs) or 10ms the list of iova's will be reclaimed and the DMAR engines associated are IOTLB-flushed. This approach recovers 15 to 20% of the performance lost when using the IOMMU for my netperf udp stream benchmark with small packets. It can be disabled with a kernel boot parameter "intel_iommu=strict". Its use does weaken the IOMMU protections a bit. Signed-off-by: Mark Gross <mgross@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: simplify quirk debug outputBjorn Helgaas
print_fn_descriptor_symbol() prints the address if we don't have a symbol, so no need to print both. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: iova RB tree setup tweakmark gross
The following patch merges two functions into one allowing for a 3% reduction in overhead in locating, allocating and inserting pages for use in IOMMU operations. Its a bit of a eye-crosser so I welcome any RB-tree / MM experts to take a look. It works by re-using some of the information gathered in the search for the pages to use in setting up the IOTLB's in the insertion of the iova structure into the RB tree. Signed-off-by: <mgross@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: add generic pci_enable_resources()Bjorn Helgaas
Each architecture has its own pcibios_enable_resources() implementation. These differ in many minor ways that have nothing to do with actual architectural differences. Follow-on patches will make most arches use this generic version instead. This version is based on powerpc, which seemed most up-to-date. The only functional difference from the x86 version is that this uses "!r->parent" to check for resource collisions instead of "!r->start && r->end". Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: add PCI Express ASPM supportShaohua Li
PCI Express ASPM defines a protocol for PCI Express components in the D0 state to reduce Link power by placing their Links into a low power state and instructing the other end of the Link to do likewise. This capability allows hardware-autonomous, dynamic Link power reduction beyond what is achievable by software-only controlled power management. However, The device should be configured by software appropriately. Enabling ASPM will save power, but will introduce device latency. This patch adds ASPM support in Linux. It introduces a global policy for ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control it. The interface can be used as a boot option too. Currently we have below setting: -default, BIOS default setting -powersave, highest power saving mode, enable all available ASPM state and clock power management -performance, highest performance, disable ASPM and clock power management By default, the 'default' policy is used currently. In my test, power difference between powersave mode and performance mode is about 1.3w in a system with 3 PCIE links. Note: some devices might not work well with aspm, either because chipset issue or device issue. The patch provide API (pci_disable_link_state), driver can disable ASPM for specific device. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: Include PCI domain in PCI bus names on x86/x86_64Gary Hade
The PCI bus names included in /proc/iomem and /proc/ioports are of the form 'PCI Bus #XX' where XX is the bus number. This patch changes the naming to 'PCI Bus XXXX:YY' where XXXX is the domain number and YY is the bus number. For example, PCI bus 14 in domain 0 will show as 'PCI Bus 0000:14' instead of 'PCI Bus #14'. This change makes the naming consistent with other architectures such as ia64 where multiple PCI domain support has been around longer. Signed-off-by: Gary Hade <garyhade@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: #if 0 pci_cleanup_aer_correct_error_status()Adrian Bunk
#if 0 the no longer used pci_cleanup_aer_correct_error_status(). Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: pcie AER: don't check _OSC when acpi is disabledYinghai Lu
[PATCH] pcie AER: don't check _OSC when acpi is disabled when acpi=off or pci=noacpi, get warning AER service couldn't init device 0000:00:0a.0:pcie01 - no _OSC support AER service couldn't init device 0000:00:0e.0:pcie01 - no _OSC support AER service couldn't init device 0000:00:0f.0:pcie01 - no _OSC support AER service couldn't init device 0000:80:0b.0:pcie01 - no _OSC support AER service couldn't init device 0000:80:0e.0:pcie01 - no _OSC support AER service couldn't init device 0000:80:0f.0:pcie01 - no _OSC support so don't check _OSC in aer_osc_setup Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: remove global list of PCI devicesGreg Kroah-Hartman
This patch finally removes the global list of PCI devices. We are relying entirely on the list held in the driver core now, and do not need a separate "shadow" list as no one uses it. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: add is_added flag to struct pci_devGreg Kroah-Hartman
This lets us check if the device is really added to the driver core or not, which is what we need when walking some of the bus lists. The flag is there in anticipation of getting rid of the other PCI device list, which is what we used to check in this situation. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: make no_pci_devices() use the pci_bus_type listGreg Kroah-Hartman
no_pci_devices() should use the driver core list of PCI devices, not our "separate" one. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI Hotplug: the ibm driver is not dependant on PCI_LEGACYGreg Kroah-Hartman
This was marked incorrectly for some reason. Allow the ibmphp driver to be built even if PCI_LEGACY is not enabled. Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI Hotplug: make cpcihp driver use modern apisGreg Kroah-Hartman
This removes the depandancy of the cpcihp driver from the PCI_LEGACY config option by removing its usage of the pci_find_bus() function. Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Scott Murray <scottm@somanetworks.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: clean up search.c a lotGreg Kroah-Hartman
This cleans up the search.c file, now using the pci list of devices that are created for the driver core, instead of relying on our separate list of devices. It's better to use the functions already created for this kind of thing, instead of rolling our own all the time. This work is done in anticipation of getting rid of that second list of pci devices all together. And it ends up saving code, always a nice benefit. This also removes one compiler warning for when CONFIG_PCI_LEGACY is enabled as we no longer internally use the deprecated functions anymore. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: remove pci_get_device_reverseGreg Kroah-Hartman
This removes the pci_get_device_reverse function as there should not be any need to walk pci devices backwards anymore. All users of this call are now gone from the tree, so it is safe to remove it. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: remove pci_find_presentGreg Kroah-Hartman
No one is using this function anymore for quite some time, so remove it. Everyone calls pci_dev_present() instead anyway... Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: #if 0 pci_assign_resource_fixed()Adrian Bunk
An unused function that bloated the kernel only when CONFIG_EMBEDDED was enabled... Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19cpumask: use new cpus_scnprintf functionMike Travis
* Cleaned up references to cpumask_scnprintf() and added new cpulist_scnprintf() interfaces where appropriate. * Fix some small bugs (or code efficiency improvments) for various uses of cpumask_scnprintf. * Clean up some checkpatch errors. Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-19generic: use new set_cpus_allowed_ptr functionMike Travis
* Use new set_cpus_allowed_ptr() function added by previous patch, which instead of passing the "newly allowed cpus" cpumask_t arg by value, pass it by pointer: -int set_cpus_allowed(struct task_struct *p, cpumask_t new_mask) +int set_cpus_allowed_ptr(struct task_struct *p, const cpumask_t *new_mask) * Modify CPU_MASK_ALL Depends on: [sched-devel]: sched: add new set_cpus_allowed_ptr function Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-28pci: revert SMBus unhide on HP Compaq nx6110Jean Delvare
This reverts commit 3c0a654e390d00fef9d8faed758f5e1e8078adb5 and fixes kernel bug #10245: http://bugzilla.kernel.org/show_bug.cgi?id=10245 The HP Compaq nc6120 has the same PCI sub-device ID as the nx6110, and the SMBus is used by ACPI for thermal management on the nc6120, so Linux should not attach a native driver to it. This means that this quirk is unsafe and has to be removed. I also added a comment to help developers realize that adding new IDs to this SMBus unhiding quirk table should be done only with great care, and in particular only after checking that ACPI is not making use of the SMBus. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Tomasz Koprowski <tomek@koprowski.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-26Revert "PCI: remove transparent bridge sizing"Linus Torvalds
This reverts commit 8fa5913d54f3b1e09948e6a0db34da887e05ff1f, which caused various interesting problems for people, including wrong resource allocations. See for example bugzilla entry "2.6.25-rc2: ohci1394 problem (MMIO broken)" at http://bugzilla.kernel.org/show_bug.cgi?id=10080 And Gary Hade says: "The same change had also exposed an issue reported by Paul Martin that has been causing an Oops while hotplugging ThinkPads to a ThinkPad Dock II. See http://lkml.org/lkml/2008/2/19/405 http://bugzilla.kernel.org/show_bug.cgi?id=9961 I have a fix for the ThinkPad docking Oops but if the issue being discussed here is caused by the transparent bridge sizing removal change I totally agree that it should be reverted." The transparent bridge sizing removal change was motivated by insufficient PCI memory resource for a transparent bridge window that was being created as a result of expansion ROM(s) being included in the transparent bridge sizing calculations. A later "PCI: Remove default PCI expansion ROM memory allocation" change ( re: http://lkml.org/lkml/2007/12/11/361 ) removes the expansion ROM(s) from the transparent bridge sizing calculations which actually resolves the original issue in a different manner. So, even if the "PCI: remove transparent bridge sizing" is not problematic it is no longer needed anyway." Identified-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Tested-by: Thomas Meyer <thomas@m3y3r.de> Acked-by: Gary Hade <garyhade@us.ibm.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-24PCI: revert "pcie: utilize pcie transaction pending bit"Andrew Morton
Revert as it is reported to cause problems for people. commit 4348a2dc49f9baecd34a9b0904245488c6189398 Author: Shaohua Li <shaohua.li@intel.com> Date: Wed Oct 24 10:45:08 2007 +0800 pcie: utilize pcie transaction pending bit PCIE has a mechanism to wait for Non-Posted request to complete. I think pci_disable_device is a good place to do this. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Due to the regression reported at http://bugzilla.kernel.org/show_bug.cgi?id=10065 Cc: Shaohua Li <shaohua.li@intel.com> Cc: Soeren Sonnenburg <kernel@nn7.de> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24PCI: iova: lockdep false alarm fixMark Gross
lockdep goes off on the iova copy_reserved_iova() because it and a function it calls grabs locks in the from, and the to of the copy operation. The function grab locks of the same lock classes triggering the warning. The first lock grabbed is for the constant reserved areas that is never accessed after early boot. Technically you could do without grabbing the locks for the "from" structure its copying reserved areas from. But dropping the from locks to me looks wrong, even though it would be ok. The affected code only runs in early boot as its setting up the DMAR engines. This patch gives the reserved_ioval_list locks special lockdep classes. Signed-off-by: Mark Gross <mgross@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-17pciehp: don't enable slot unless forcedMark Lord
This fixes a 2.6.25 regression reported by Alex Chiang. Invoke pciehp_enable_slot() at startup only when pciehp_force=1. Some HP equipment apparently cannot cope with it otherwise. This restores the (previously working) 2.6.24 behaviour here, while allowing machines that need a kick to use pciehp_force=1. This was the original design back in October 2007, but Kristen suggested we try without it first: Kristen Carlson Accardi wrote: >I think it would be ok to try allowing the slot to be enabled when not >using pciehp_force mode. We can wrap it later if it proves to break things This ended up breaking one of Alex's setups, so it's time to put the wrapper back in now. Signed-off-by: Mark Lord <mlord@pobox.com> Acked-by: Alex Chiang <achiang@hp.com> Acked-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6: PCI: fix issue with busses registering multiple times in sysfs
2008-03-13PCI: fix issue with busses registering multiple times in sysfsGreg Kroah-Hartman
PCI busses can be registered multiple times, so we need to detect if we have registered our bus structure in sysfs already. If so, don't do it again. Thanks to Guennadi Liakhovetski <g.liakhovetski@gmx.de> for reporting the problem, and to Linus for poking me to get me to believe that it was a real problem. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-13Merge branches 'release', 'button-sysfs', 'misc', 'mismatch', 'randconfig' ↵Len Brown
and 'toshiba' into release
2008-03-10PCI Hotplug: Fix small mem leak in IBM Hot Plug Controller DriverJesper Juhl
In drivers/pci/hotplug/ibmphp_ebda.c::ebda_rsrc_controller(), storage is allocated with kzalloc() and assigned to 'tmp_slot'. Then lots of stuff, like ->flag, ->supported_speed etc is set in tmp_slot. A bit further down there's then this test : if (!bus_info_ptr1) { rc = -ENODEV; goto error; } At this point, tmp_slot has not been assigned to anything, so when erroring-out we want to free it, but nothing at the 'error:' label free's 'tmp_slot' - and we can't really free 'tmp_slot' at 'error:' since we may jump to that label later when 'tmp_slot' *has* been used and we do not want it freed. So, the only sane option left seems to be to kfree(tmp_slot) just before jumping to the 'error:' label in the one place where this is what actually makes sense. The following patch does just that and thus kills off a tiny potential memory leak. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04pci: hotplug: pciehp: fix error code path in hpc_power_off_slotKenji Kaneshige
Fix the error code path in hpc_power_off_slot(). The Bad DLLP Mask bit must be restored before return. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04PCI: fix up error messages for pci_bus registeringGreg Kroah-Hartman
Due to the class_device cleanup of pci_bus, the error messages when things go wrong are incorrect. So fix this up to properly report what is really happening, if things go wrong. Thanks to Kay for pointing out the issue. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04PCI: fix section mismatch warning in pci_scan_child_busSam Ravnborg
Fix following warning: WARNING: vmlinux.o(.text+0x47bdb1): Section mismatch in reference from the function pci_scan_child_bus() to the function .devinit.text:pcibios_fixup_bus() We had plenty of functions that could be annotated __devinit but due to the former restriction that exported symbols could not be annotated they were not so. So annotate these function and fix the references from the pci/hotplug/* code to silence the resuting warnings. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04PCI: consolidate duplicated MSI enable functionsBjorn Helgaas
Two recent patches added basically the same code to turn on HT MSI mapping: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=6bae1d96c6d7dde078994f6cb98235fd46f8736b http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=9dc625e72309e1c919ea3e7f51d0ffca96123787 There's no need to have both, so this patch removes one copy. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04PCI: use dev_printk in quirk messagesBjorn Helgaas
Convert quirk printks to dev_printk(). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-03docbook: fix kernel-api source filesRandy Dunlap
Fix docbook problems in kernel-api.tmpl. These cause the generated docbook to be incorrect. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23copyright owner and author clean up for intel iommu and related filesmark gross
The following is a clean up and correction of the copyright holding entities for the files associated with the intel iommu code. Signed-off-by: <mgross@linux.intel.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23PM: Introduce PM_EVENT_HIBERNATE callback stateRafael J. Wysocki
During the last step of hibernation in the "platform" mode (with the help of ACPI) we use the suspend code, including the devices' ->suspend() methods, to prepare the system for entering the ACPI S4 system sleep state. But at least for some devices the operations performed by the ->suspend() callback in that case must be different from its operations during regular suspend. For this reason, introduce the new PM event type PM_EVENT_HIBERNATE and pass it to the device drivers' ->suspend() methods during the last phase of hibernation, so that they can distinguish this case and handle it as appropriate. Modify the drivers that handle PM_EVENT_SUSPEND in a special way and need to handle PM_EVENT_HIBERNATE in the same way. These changes are necessary to fix a hibernation regression related to the i915 driver (ref. http://lkml.org/lkml/2008/2/22/488). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Tested-by: Jeff Chua <jeff.chua.linux@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>