aboutsummaryrefslogtreecommitdiff
path: root/drivers/pcmcia
AgeCommit message (Collapse)Author
2009-12-08Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (149 commits) arm: omap: Add omap3_defconfig AM35xx: Defconfig for AM3517 EVM board AM35xx: Add support for AM3517 EVM board omap: 3630sdp: defconfig creation omap: 3630sdp: introduce 3630 sdp board support omap3: Add defconfig for IGEP v2 board omap3: Add minimal IGEP v2 support omap3: Add CompuLab CM-T35 defconfig omap3: Add CompuLab CM-T35 board support omap3: rx51: Add wl1251 wlan driver support omap3: rx51: Add SDRAM init omap1: Add default kernel configuration for Herald omap1: Add board support and LCD for HTC Herald omap: zoom2: update defconfig for LL_DEBUG_NONE omap: zoom3: defconfig creation omap3: zoom: Introduce zoom3 board support omap3: zoom: Drop i2c-1 speed to 2400 omap3: zoom: rename zoom2 name to generic zoom omap3: zoom: split board file for software reuse omap3evm: MIgrate to smsc911x ethernet driver ... Fix trivial conflict (two unrelated config options added next to each other) in arch/arm/mach-omap2/Makefile
2009-12-06Fix soc_common PCMCIA configurationRussell King
Jonathan Cameron reports that building PCMCIA as modules doesn't work: As module get a load of undefined symbols: ERROR: "soc_pcmcia_request_irqs" [drivers/pcmcia/pxa2xx_stargate2.ko] undefined! ERROR: "soc_pcmcia_free_irqs" [drivers/pcmcia/pxa2xx_stargate2.ko] undefined! ERROR: "soc_pcmcia_enable_irqs" [drivers/pcmcia/pxa2xx_stargate2.ko] undefined! ERROR: "soc_pcmcia_disable_irqs" [drivers/pcmcia/pxa2xx_stargate2.ko] undefined! ERROR: "soc_pcmcia_add_one" [drivers/pcmcia/pxa2xx_base.ko] undefined! ERROR: "soc_common_pcmcia_get_timing" [drivers/pcmcia/pxa2xx_base.ko] undefined! ERROR: "soc_pcmcia_remove_one" [drivers/pcmcia/pxa2xx_base.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 This is because soc_common tries to be built-in, but it should be a module. Allow soc_common to be a module. Reported-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5824/1: SA1100: reuse h3600 PCMCIA driver on h3100Dmitry Artamonow
Both iPAQs h3600 and h3100 share the same control GPIOs for PCMCIA, so driver can be reused. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5819/1: SA1100: h3100/h3600: merge h3600.h and h3600_gpio.h into h3xxx.hDmitry Artamonow
Combine both headers into one, rename to h3xxx.h and change all users accordingly. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5814/1: SA1100: h3100/h3600: convert all users of assign_h3600_egpio to ↵Dmitry Artamonow
gpiolib Use of gpio_request/gpio_free in some callbacks may look ugly, but corresponding drivers (sa1100_serial and sa1100_fb) don't provide (yet) init/exit hooks and registering these gpios in *_mach_init is also not possible, because htc-gpio driver starts a bit later... Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5811/2: pcmcia: convert sa1100_h3600 driver to gpiolibDmitry Artamonow
Convert all operations with GPLR/GPCR/GPSR to gpiolibs calls. Also change all IRQ_GPIO* to gpio_to_irq(*GPIO*) Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (50 commits) pcmcia: rework the irq_req_t typedef pcmcia: remove deprecated handle_to_dev() macro pcmcia: pcmcia_request_window() doesn't need a pointer to a pointer pcmcia: remove unused "window_t" typedef pcmcia: move some window-related code to pcmcia_ioctl.c pcmcia: Change window_handle_t logic to unsigned long pcmcia: Pass struct pcmcia_socket to pcmcia_get_mem_page() pcmcia: Pass struct pcmcia_device to pcmcia_map_mem_page() pcmcia: Pass struct pcmcia_device to pcmcia_release_window() drivers/pcmcia: remove unnecessary kzalloc pcmcia: correct handling for Zoomed Video registers in topic.h pcmcia: fix printk formats pcmcia: autoload module pcmcia pcmcia/staging: update comedi drivers PCMCIA: stop duplicating pci_irq in soc_pcmcia_socket PCMCIA: ss: allow PCI IRQs > 255 PCMCIA: soc_common: remove 'dev' member from soc_pcmcia_socket PCMCIA: soc_common: constify soc_pcmcia_socket ops member PCMCIA: sa1111: remove duplicated initializers PCMCIA: sa1111: wrap soc_pcmcia_socket to contain sa1111 specific data ...
2009-11-28pcmcia: rework the irq_req_t typedefDominik Brodowski
Most of the irq_req_t typedef'd struct can be re-worked quite easily: (1) IRQInfo2 was unused in any case, so drop it. (2) IRQInfo1 was used write-only, so drop it. (3) Instance (private data to be passed to the IRQ handler): Most PCMCIA drivers using pcmcia_request_irq() to actually register an IRQ handler set the "dev_id" to the same pointer as the "priv" pointer in struct pcmcia_device. Modify the two exceptions (ipwireless, ibmtr_cs) to also work this waym and set the IRQ handler's "dev_id" to p_dev->priv unconditionally. (4) Handler is to be of type irq_handler_t. (5) Handler != NULL already tells whether an IRQ handler is present. Therefore, we do not need the IRQ_HANDLER_PRESENT flag in irq_req_t.Attributes. CC: netdev@vger.kernel.org CC: linux-bluetooth@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-scsi@vger.kernel.org CC: alsa-devel@alsa-project.org CC: Jaroslav Kysela <perex@perex.cz> CC: Jiri Kosina <jkosina@suse.cz> CC: Karsten Keil <isdn@linux-pingi.de> for the Bluetooth parts: Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-28pcmcia: pcmcia_request_window() doesn't need a pointer to a pointerDominik Brodowski
pcmcia_request_window() only needs a pointer to struct pcmcia_device, not a pointer to a pointer. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-scsi@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> Acked-by: Karsten Keil <keil@b1-systems.de> (for ISDN) Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-28pcmcia: remove unused "window_t" typedefDominik Brodowski
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-28pcmcia: move some window-related code to pcmcia_ioctl.cDominik Brodowski
pcmcia_get_window() and pcmcia_get_mem_page() were only called from pcmcia_ioctl.c. Therefore, move these functions to that file, and remove the useless EXPORTs. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-28pcmcia: Change window_handle_t logic to unsigned longMagnus Damm
Logic changes based on top of the other patches: This set of patches changed window_handle_t from being a pointer to an unsigned long. The unsigned long is now a simple index into socket->win[]. Going from a pointer to unsigned long should leave the user space interface unchanged unless I'm mistaken. This change results in code that is less error prone and a user space interface which is much cleaner and safer. A nice side effect is that we are also are able to remove all members except one from window_t. [ linux@dominikbrodowski.net: Update to 2.6.31. Also, a plain "index" to socket->win[] does not work, as several codepaths rely on "window_handle_t" being non-zero if used. Therefore, set the window_handle_t to the socket->win[] index + 1. ] CC: netdev@vger.kernel.org Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-28pcmcia: Pass struct pcmcia_socket to pcmcia_get_mem_page()Magnus Damm
No logic changes, just pass struct pcmcia_socket to pcmcia_get_mem_page() [linux@dominikbrodowski.net: update to 2.6.31] Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-28pcmcia: Pass struct pcmcia_device to pcmcia_map_mem_page()Magnus Damm
No logic changes, just pass struct pcmcia_device to pcmcia_map_mem_page() [linux@dominikbrodowski.net: update to 2.6.31] CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-scsi@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> Acked-by: Karsten Keil <keil@b1-systems.de> (for ISDN) Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-28pcmcia: Pass struct pcmcia_device to pcmcia_release_window()Magnus Damm
No logic changes, just pass struct pcmcia_device to pcmcia_release_window(). [linux@dominikbrodowski.net: update to 2.6.31] CC: netdev@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-22drivers/pcmcia: remove unnecessary kzallocJulia Lawall
The result of calling kzalloc is never used or freed. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-11pcmcia: correct handling for Zoomed Video registers in topic.hAvi Cohen Stuart
Fix handling of Zoomed Video Registers in the Topic pcmcia controller ( http://bugzilla.kernel.org/show_bug.cgi?id=14581 ). The information has been retrieved from the Topic manual which can be obtained from Toshiba. The Zoomed Video is used with PCMCIA Cards like the Margi DVD-to-Go. [linux@dominikbrodowski.net: whitespace & commit message fix] Signed-off-by: Avi Cohen Stuart <avi.cohenstuart@infor.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-10Merge branch '7xx-iosplit-plat' with omap-fixesTony Lindgren
2009-11-09pcmcia: autoload module pcmciaDominik Brodowski
Attempt to load the "pcmcia" module for 16-bit PCMCIA cards, so that PCMCIA support becomes available without pcmciautils/udev userspace interaction. Based on a suggestion and a patch Signed-off-by: Komuro <komurojun-mbn@nifty.com> but converted it to request_module_nowait() and move it to a later stage. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-09PCMCIA: stop duplicating pci_irq in soc_pcmcia_socketRussell King - ARM Linux
skt->irq is a mere duplication of pcmcia_socket's pci_irq member. Get rid of it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-09PCMCIA: soc_common: remove 'dev' member from soc_pcmcia_socketRussell King - ARM Linux
The 'dev' member is now only ever written, so we can safely remove it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-09PCMCIA: soc_common: constify soc_pcmcia_socket ops memberRussell King - ARM Linux
No one should modify the ops structure supplied to soc_pcmcia_socket so make it const. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-09PCMCIA: sa1111: remove duplicated initializersRussell King - ARM Linux
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-09PCMCIA: sa1111: wrap soc_pcmcia_socket to contain sa1111 specific dataRussell King - ARM Linux
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-09PCMCIA: soc_common: push socket probe down into SoC specific supportRussell King - ARM Linux
Move the individual socket probing and initialization down into the SoC specific support files, thereby allowing soc_common_drv_pcmcia_probe to be eliminated. soc_common.c now no longer deals with distinct groups of sockets. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-09PCMCIA: soc_common: push socket removal down to SoC specific supportRussell King - ARM Linux
Mechanically transplant the removal code from soc_common into each SoC specific base support file, thereby allowing soc_common_drv_pcmcia_remove to be removed. No other changes. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-09PCMCIA: soc_common: provide single socket add/remove functionalityRussell King - ARM Linux
Factor out the functionality for adding and removing a single socket, thereby allowing SoCs to individually register each socket. The advantage of this approach is that SoCs can then extend soc_pcmcia_socket as they wish. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-09PCMCIA: soc_common: convert to a stand alone moduleRussell King - ARM Linux
Convert soc_common.c to be a stand alone module, rather than wrapping it up into the individual SoC specific base modules. In doing this, we need to add init/exit functions for soc_common to register/remove the cpufreq notifier. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-09pcmcia: use dev_dbg and dev_print in pd6729.cDominik Brodowski
As suggested by Wolfram Sang <w.sang@pengutronix.de>, use dev_dbg(), and dev_{err,warn,info}() in pd6729.c, and add some "\n" suggested by Komuro <komurojun-mbn@nifty.com>. In the ISR, use pr_devel() and dev_vdbg() as they are only compiled if DEBUG (or, for dev_vdbg(), VERBOSE_DEBUG) are set explicitly. CC: Komuro <komurojun-mbn@nifty.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-09pcmcia: remove now-defunct cs_error, pcmcia_error_{func,ret}Dominik Brodowski
As all in-tree drivers have been converted to not use cs_error() any more, drop these functions and definitions, and update the Documentation. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-08pcmcia: extend error reporting and debug messages in coreDominik Brodowski
Add a few more error and debug messages to the PCMCIA core. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-08pcmcia: use dynamic debug in PCMCIA socket driversDominik Brodowski
Make use of the dynamic debug infrastructure in various PCMCIA socket drivers. By doing so, only the drivers relying on soc_common make use of CONFIG_PCMCIA_DEBUG. Therefore, update the Kconfig entry accordingly. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-08pcmcia: use dynamic debug instead of custom infrastructureDominik Brodowski
Use the generic "dynamic debug" infrastructure instead of CONIG_PCMCIA_DEBUG in the PCMCIA core (pcmcia.ko and pcmcia_core.ko). To enable debugging, enable CONFIG_DYNAMIC_DEBUG, mount debugfs and $ echo -n 'module pcmcia_core +p' > /sys/kernel/debug/dynamic_debug/control for the complete module "pcmcia_core", for example. For more detailled instructions, please see Documentation/dynamic-debug-howto.txt Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-08pcmcia: remove pcmcia_get_{first,next}_tuple()Dominik Brodowski
Remove the pcmcia_get_{first,next}_tuple() calls no longer needed by (current) pcmcia device drivers. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-08pcmcia: add new CIS access helpersDominik Brodowski
As a replacement to pcmcia_get_{first,next}_tuple() and pcmcia_get_tuple_data(), three new -- and easier to use -- functions are added: - pcmcia_get_tuple() to get the very first CIS entry of one type. - pcmcia_loop_tuple() to loop over all CIS entries of one type. - pcmcia_get_mac_from_cis() to read out the hardware MAC address from CISTPL_FUNCE. Only a handful of drivers need these functions anyway, as most CIS access is already handled by pcmcia_loop_config(), which now shares the same backed (pccard_loop_tuple()) with pcmcia_loop_tuple(). A pcmcia_get_mac_from_cis() bug noted by Komuro <komurojun-mbn@nifty.com> has been fixed in this revision. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-03PM / yenta: Split resume into early and late parts (rev. 4)Rafael J. Wysocki
Commit 0c570cdeb8fdfcb354a3e9cd81bfc6a09c19de0c (PM / yenta: Fix cardbus suspend/resume regression) caused resume to fail on systems with two CardBus bridges. While the exact nature of the failure is not known at the moment, it can be worked around by splitting the yenta resume into an early part, executed during the early phase of resume, that will only resume the socket and power it up if there was a card in it during suspend, and a late part, executed during "regular" resume, that will carry out all of the remaining yenta resume operations. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=14334, which is a listed regression from 2.6.31. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Reported-by: Stephen J. Gowdy <gowdy@cern.ch> Tested-by: Jose Marino <braket@hotmail.com>
2009-10-24pcmcia: drop already defined PCI_IDsWolfram Sang
Out of 10 PCI_IDs found in the PCMCIA subsystem, only two were not defined in pci_ids.h. Move them and drop the duplicates. Successfully build-tested. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-10-24pcmcia: do not load the pd6729 driver if io_base is NULLKomuro
The CL-PD6729 chip in some docking station is not initialized properly under Linux. In that case, do not load the pd6729 driver. [Dominik Brodowski <linux@dominikbrodowski.net>: spelling fixes, check for NULL not 0] Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-10-20pcmcia: Fix possible printk format warningsWolfram Sang
Fix more possible warnings introduced by my commit 1d80766554322236aee50d6023693b3210b9cf38 as fixed by the previous patch from Randy Dunlap. Not tested due to no hardware. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-10-20omap: headers: Move remaining headers from include/mach to include/platTony Lindgren
Move the remaining headers under plat-omap/include/mach to plat-omap/include/plat. Also search and replace the files using these headers to include using the right path. This was done with: #!/bin/bash mach_dir_old="arch/arm/plat-omap/include/mach" plat_dir_new="arch/arm/plat-omap/include/plat" headers=$(cd $mach_dir_old && ls *.h) omap_dirs="arch/arm/*omap*/ \ drivers/video/omap \ sound/soc/omap" other_files="drivers/leds/leds-ams-delta.c \ drivers/mfd/menelaus.c \ drivers/mfd/twl4030-core.c \ drivers/mtd/nand/ams-delta.c" for header in $headers; do old="#include <mach\/$header" new="#include <plat\/$header" for dir in $omap_dirs; do find $dir -type f -name \*.[chS] | \ xargs sed -i "s/$old/$new/" done find drivers/ -type f -name \*omap*.[chS] | \ xargs sed -i "s/$old/$new/" for file in $other_files; do sed -i "s/$old/$new/" $file done done for header in $(ls $mach_dir_old/*.h); do git mv $header $plat_dir_new/ done Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-19pcmcia: do not try to store more than 4 version stringsDominik Brodowski
... for struct pcmcia_device only provides for 4 anyway. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-10-19pcmcia: pccard_read_tuple and TUPLE_RETURN_COMMON cleanupDominik Brodowski
pccard_read_tuple(), which is only used by the PCMCIA core, should handle TUPLE_RETURN_COMMON more sensibly: If a specific function (which may be 0) is requested, set tuple.Attributes = 0 as was done in all PCMCIA drivers. If, however, BIND_FN_ALL is requested, return the "common" tuple. As to the callers of pccard_read_tuple(): - All calls to pcmcia_validate_cis() had set the "function" parameter to BIND_FN_ALL. Therefore, remove the "function" parameter and make the parameter to pccard_read_tuple explicit. - Calls to CISTPL_VERS_1 and CISTPL_MANFID now set BIND_FN_ALL. This was already the case for calls to CISTPL_LONGLINK_MFC. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-10-17pcmcia: properly close previous dev_printk if kzalloc fails in do_io_probeFrans Pop
Signed-off-by: Frans Pop <elendil@planet.nl> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-10-17pcmcia: fix controller printk format warningsRandy Dunlap
Fix new pcmcia printk format warnings: [This has now moved from linux-next to mainline. Originally sent 2009-SEP-17.] drivers/pcmcia/i82365.c:1055: warning: format '%#x' expects type 'unsigned int', but argument 6 has type 'phys_addr_t' drivers/pcmcia/i82365.c:1055: warning: format '%#x' expects type 'unsigned int', but argument 7 has type 'phys_addr_t' drivers/pcmcia/tcic.c:734: warning: format '%#x' expects type 'unsigned int', but argument 6 has type 'phys_addr_t' drivers/pcmcia/tcic.c:734: warning: format '%#x' expects type 'unsigned int', but argument 7 has type 'phys_addr_t' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-10-02Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (25 commits) ARM: 5728/1: Proper prefetch abort handling on ARMv6 and ARMv7 ARM: 5727/1: Pass IFSR register to do_PrefetchAbort() ARM: 5740/1: fix valid_phys_addr_range() range check ARM: 5739/1: ARM: allow empty ATAG_CORE ARM: 5735/1: sa1111: CodingStyle cleanups ARM: 5738/1: Correct TCM documentation ARM: 5734/1: arm: fix compilation of entry-common.S for older CPUs ARM: 5733/1: fix bcmring compile error ARM: 5732/1: remove redundant include file ARM: 5731/2: Fix U300 generic GPIO, remove ifdefs from MMCI v3 ARM: Ensure do_cache_op takes mmap_sem ARM: Fix __cpuexit section mismatch warnings ARM: Don't allow highmem on SMP platforms without h/w TLB ops broadcast ARM: includecheck fix: mach-davinci, board-dm365-evm.c ARM: Remove unused CONFIG SA1100_H3XXX ARM: Fix warning: unused variable 'highmem' ARM: Fix warning: #warning syscall migrate_pages not implemented ARM: Fix SA11x0 clocksource warning ARM: Fix SA1100 Neponset serial section mismatch ARM: Fix SA1100 Assabet/Neponset PCMCIA section mismatch warnings ...
2009-09-30MIPS: BCM63xx: Add PCMCIA & Cardbus support.Maxime Bizon
Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-29PM / yenta: Fix cardbus suspend/resume regressionRafael J. Wysocki
Since 2.6.29 the PCI PM core have been restoring the standard configuration registers of PCI devices in the early phase of resume. In particular, PCI devices without drivers have been handled this way since commit 355a72d75b3b4f4877db4c9070c798238028ecb5 (PCI: Rework default handling of suspend and resume). Unfortunately, this leads to post-resume problems with CardBus devices which cannot be accessed in the early phase of resume, because the sockets they are on have not been woken up yet at that point. To solve this problem, move the yenta socket resume to the early phase of resume and, analogously, move the suspend of it to the late phase of suspend. Additionally, remove some unnecessary PCI code from the yenta socket's resume routine. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=13092, which is a post-2.6.28 regression. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-by: Florian <fs-kernelbugzilla@spline.de> Cc: stable@kernel.org
2009-09-29PM / PCMCIA: Drop second argument of pcmcia_socket_dev_suspend()Rafael J. Wysocki
pcmcia_socket_dev_suspend() doesn't use its second argument, so it may be dropped safely. This change is necessary for the subsequent yenta suspend/resume fix. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: stable@kernel.org
2009-09-28ARM: Fix SA1100 Assabet/Neponset PCMCIA section mismatch warningsRussell King
WARNING: drivers/pcmcia/sa1100_cs.o(.data+0x48): Section mismatch in reference from the variable sa11x0_pcmcia_hw_init to the function .init.text:pcmcia_assabet_init() The variable sa11x0_pcmcia_hw_init references the function __init pcmcia_assabet_init() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, WARNING: drivers/pcmcia/sa1111_cs.o(.text+0x298): Section mismatch in reference from the function pcmcia_probe() to the function .init.text:pcmcia_neponset_init() The function pcmcia_probe() references the function __init pcmcia_neponset_init(). This is often because pcmcia_probe lacks a __init annotation or the annotation of pcmcia_neponset_init is wrong. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-24Merge branch 'origin' into for-linusRussell King
Conflicts: MAINTAINERS