aboutsummaryrefslogtreecommitdiff
path: root/drivers/pcmcia
AgeCommit message (Collapse)Author
2005-09-29[ARM] Don't include mach-types.h unnecessarilyRussell King
It's pointless to include mach-types.h if you're not going to use anything from it. These references were removed as a result of: grep -lr 'asm/mach-types\.h' . | xargs grep -L 'machine_is_\|MACH_TYPE_\|MACHINE_START\|machine_type' Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-28[PATCH] pcmcia: only start up nonstatic sockets if both mem and io are availableDominik Brodowski
Only start up nonstatic sockets if both IO and MEM resources are available. Thanks to Russell King and Matthew Wilcox for tracking this down. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-28[PATCH] pcmcia: allow one port excludesDominik Brodowski
Allow for excluding only one port in /etc/pcmcia/config.otps Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26[PATCH] yenta: more ENE bridgesDaniel Ritz
Adds better support for the CB-710, CB-712, CB-720 and CB-722 bridges from EnE Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26[PATCH] yenta: add support for more TI bridgesDaniel Ritz
Support some more TI cardbus bridges. most of them are multifunction devices which adds 1394 controllers, smartcard readers etc. this could also help with the various problems with the XX21 controllers seen on the linux-pcmcia list. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26[PATCH] pcmcia: fix Kconfig dependencyKomuro
TCIC depends on ISA. It is used with ISA-bus system only. Signed-off-by: komurojun-mbn@nifty.com Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26[PATCH] yenta: tiny cleanupDominik Brodowski
pci_set_power_state is not needed, as we call pci_enable_device() somewhere else. Also, the resource we write to PCI_BASE_ADDRESS_0 needs to be converted to bus-centric view first. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26[PATCH] yenta: don't mess with bridge control registerDaniel Ritz
In interrupt probing (both ISA and PCI) the bridge control register is used to change interrupt routing to ISA or PCI by changing bit 7. But this bit only controls the routing of card functional interrupts, not the CSC interrupts which are used for interrupt probing. A bad side effect of messing with this register in yenta_probe_irq() is that it can lead to irq storms if a card is inserted and already powered by the BIOS. Usage in yenta_sock_init() and yenta_config_init() seem to be fishy as well. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26[PATCH] yenta: auto-tune EnE bridges for CardBus cardsDaniel Ritz
Echo Audio cardbus products are known to be incompatible with EnE bridges. in order to maybe solve the problem a EnE specific test bit has to be set, another cleared...but other setups have a good chance to break when just forcing the bits. so do the whole thingy automatically. The patch adds a hook in cb_alloc() that allows special tuning for the different chipsets. for ene just match the Echo products and set/clear the test bits, defaults to do the same thing as w/o the patch to not break working setups. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Cc: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-14Fix yenta error message when unable to find a bus assignmentLinus Torvalds
And mention 'pci=assign-busses' as a possible fix. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-14[PATCH] yenta oops fixIvan Kokshaysky
In some cases, especially on modern laptops with a lot of PCI and cardbus bridges, we're unable to assign correct secondary/subordinate bus numbers to all cardbus bridges due to BIOS limitations unless we are using "pci=assign-busses" boot option. So some cardbus controllers may not have attached subordinate pci_bus structure, and yenta driver must cope with it - just ignore such cardbus bridges. For example, see https://bugzilla.novell.com/show_bug.cgi?id=113778 Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13[PATCH] pcmcia: warn on IOCTL usageDominik Brodowski
More visible user information of scheduled feature removal. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] pcmcia: add pcmcia to IRQ informationBrice Goglin
Add a devname parameter to the pcmcia_device structure, fills it with "pcmcia<bus_id>" in pcmcia_device_add, and passes it to request_irq in pcmcia_request_irq. Signed-off-by: Brice Goglin <Brice.Goglin@ens-lyon.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] pcmcia: OMAP CF controllerDavid Brownell
This adds a socket driver for the OMAP CF controller; it's currently in use on OSK boards. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] pcmcia: remove unused Vpp1, Vpp2 and VccDominik Brodowski
config_t->Vpp1, Vpp2 and Vcc are never read, so remove them. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] pcmcia: remove unused client_tDominik Brodowski
client_t and CLIENT_MAGIC are unused, so remove them Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] pcmcia/yenta: avoid PCI write posting problemDaniel Ritz
extend cb_writel(), exca_writeb(), exca_writel() to do a read[lb]() after the write[lb]() to avoid possible problem with PCI write posting. Seems to fix Bug #5061. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] fix pcmcia_request_irq() for multifunction cardDaniel Ritz
multifunction cards need to have the same irq assigned to both functions. the code tries that but fails because ret is still set to CS_IN_USE which results in the function having the CB irq assigned. yenta_set_socket then just changes the irq routing to use the PCI interrupt but the first functions irq handler is registered on an ISA interrupt. boom. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] pcmcia/cs: fix possible missed wakeupDaniel Ritz
- thread_done should only be completed when the wait_queue is installed. - all wake up conditions should be checked before schedule() this fixes a hang of rmmod in the sequence modprobe yenta_socket; rmmod yenta_socket as reported by Andreas Steinmetz. w/o this rmmod yenta_socket can hang on wait_for_completion() in pcmcia_unregister_socket() Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Cc: Dominik Brodowski <linux@brodo.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] yenta: share code with PCI coreDominik Brodowski
Share code between setup-bus.c and yenta_socket.c: use the write-out code of resources to the bridge also in yenta_socket.c, as it provides useful debug output. In addition, it fixes the bug that the CPU-centric resource view might need to be transferred to the PCI-centric view: setup-bus.c does that, while yenta-socket.c did not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] pcmcia: reduce ds.c stack footprintIngo Molnar
This patch reduces the stack footprint of pcmcia_device_query() from 416 bytes to 36 bytes. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07[PATCH] yenta: make ToPIC95 bridges work with 16bit cardsDaniel Ritz
ToPIC95 brides (and maybe some other too) require to use the ExCA registers to power up the socket if a 16bit card is pluged. allow socket drivers to set a flag so that yenta does just that. also clean up yenta_get_status() a bit to use the new yenta_get_power() function. Side note: ToPIC97 bridges (at least in Rev.5 i have) don't require this. Ryan Underwood <nemesis-lists@icequake.net> said: According to the mail that David Hinds received from a Toshiba engineer, ToPIC95 and 97 do require this, and ToPIC100 does not. Maybe you have a later revision. For all chips, 16-bit cards can be enabled through ExCA. So doesn't it make sense just to make this the default behavior for all Toshiba chips, to avoid corner cases showing up later? Daniel responded: I disagree with ryan to change anything for topic97 bridges. they work. and I couldn't find (read google) any report of a topic97 breaking on applying power with the CB registers. I'm having several toshba notebooks at work (and home) with topic95,97,100 bridges. Only the ones with a topic95 didn't work. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[ARM] 2882/1: pxa2xx_sharpsl: Update PCMCIA driver to support variety of new ↵Richard Purdie
hardware Patch from Richard Purdie This patch updates the PCMCIA pxa2xx_sharpsl driver to support multiple scoop devices by adding a scoop to pcmcia slot mapping structure. It adds platform support for poodle, is known to work on spitz (which is dual slot) and should also support collie with a minor amount of further work. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-03[ARM] 2873/1: PCMCIA soc: Allow access to filesystems on CF at boot timeRichard Purdie
Patch from Richard Purdie This change makes the soc pcmcia interfaces available earlier in the boot process meaning devices like CF microdrives can be used for the root filesystem. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-23[PATCH] missing include in pcmcia_resource.cAl Viro
missing include of asm/irq.h Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-04[PATCH] pci and yenta: pcibios_bus_to_resourceDominik Brodowski
In yenta_socket, we default to using the resource setting of the CardBus bridge. However, this is a PCI-bus-centric view of resources and thus needs to be converted to generic resources first. Therefore, add a call to pcibios_bus_to_resource() call in between. This function is a mere wrapper on x86 and friends, however on some others it already exists, is added in this patch (alpha, arm, ppc, ppc64) or still needs to be provided (parisc -- where is its pcibios_resource_to_bus() ?). Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-02[PATCH] Obvious bugfix for yenta resource allocationPaul Mackerras
Recent changes (well, dating from 12 July) have broken cardbus on my powerbook: I get 3 messages saying "no resource of type xxx available, trying to continue", and if I plug in my wireless card, it complains that there are no resources allocated to the card. This all worked in 2.6.12. Looking at the code in yenta_socket.c, function yenta_allocate_res, it's obvious what is wrong: if we get to line 639 (i.e. there wasn't a usable preassigned resource), we will always flow through to line 668, which is the printk that I was seeing, even if a resource was successfully allocated. It looks to me as though there should be a return statement after the two config_writel's in each of the 3 branches of the if statements, so that the function returns after successfully setting up the resource. The patch below adds these return statements, and with this patch, cardbus works on my powerbook once again. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-01[PATCH] pcmcia: fix multiple insertion of multifunction cardsDominik Brodowski
The ordering of setting and clearing device_add_pending went wrong on some occasions, causing multifunction cards only to be handled correctly on the first insertion, not on subsequent ones. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-30Revert "yenta free_irq on suspend"Linus Torvalds
ACPI is wrong. Devices should not release their IRQ's on suspend and re-aquire them on resume. ACPI should just re-init the IRQ controller instead of breaking most drivers very subtly. Breakage reported by Hugh Dickins <hugh@veritas.com> Undo: d8c4b4195c7d664baf296818bf756775149232d3 Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28[PATCH] pcmcia: disable read prefetch/write burst on old O2Micro bridgesDaniel Ritz
Older O2Micro bridges have problems with both read prefetch and write burst depending on the combination of the chipset, bridge, cardbus card. safest is to disable read prefetch and write burst on those old bridges. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28[PATCH] yenta: free_irq() on suspend.Daniel Ritz
Resume doesn't seem to work without. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28[PATCH] pcmcia: fix sharing IRQs and request_irq without IRQ_HANDLE_PRESENTDominik Brodowski
Debugging and description from: Noah Misch <noah@cs.caltech.edu> When a driver calls pcmcia_request_irq with IRQ_HANDLE_PRESENT unset, it looks for an open IRQ by request_irq()ing with a dummy handler and NULL dev_info. free_irq uses dev_info as a key for identifying the handler to free among those sharing an IRQ, so request_irq returns -EINVAL if dev_info is NULL and the IRQ may be shared. That unknown error code is the -EINVAL. It looks like only pcnet_cs and axnet_cs are affected. Most other drivers let pcmcia_request_irq install their interrupt handlers. sym53c500_cs requests its IRQ manually, but it cannot share an IRQ. The appended patch changes pcmcia_request_irq to pass an arbitrary, unique, non-NULL dev_info with the dummy handler. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28[PATCH] pcmcia: avoid duble iounmap of one addressDominik Brodowski
Avoid double iounmap of one address, and disable cis_virt if set_mem_map failed. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28[PATCH] pcmcia: update au1000 to work with recent changesDominik Brodowski
Get the au1000 PCMCIA socket drivers to work. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28[PATCH] pcmcia: fix commentPavel Roskin
There are two problems with the message about missing callback functions: it's not written in correct English and it lacks newline at the end. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26[PATCH] ARM: 2830/1: Fix Jornada 720 PCMCIA-supportMichael Gernoth
Patch from Michael Gernoth This patch lets the Jornada 720 PCMCIA-driver compile again. The resulting driver has been tested on a Jornada with a CF-card, which was mounted and accessed successfully. Signed-off-by: Michael Gernoth <michael@gernoth.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-12Merge master.kernel.org:/pub/scm/linux/kernel/git/lenb/linux-2.6Linus Torvalds
2005-07-12[PATCH] yenta: allocate resource fixesDominik Brodowski
The current CardBus window allocation code in yenta_socket is unable to handle the transparent PCI-bridge handling update in 2.6.13. We need to check _all_ resources of a given type to find the best one suitable for CardBus windows, not just the first one. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-12[PATCH] yenta: same resources in same structsDominik Brodowski
drivers/pci/setup-bus.c enumerates the CardBus windows (bus->resources[]) Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-12[PATCH] yenta: fix parent resource determinationDominik Brodowski
If the CardBus windows were pre-configured and the CardBus bridge is behind a transparent PCI-PCI bridge, pci_find_parent_resource() might return a different resource than the real parent if it is called before the window is determined. Therefore, move that call around. Also fix return of value in void function. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-12[ACPI] merge acpi-2.6.12 branch into latest Linux 2.6.13-rc...Len Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-11[ACPI] S3 Suspend to RAM: fix driver suspend/resume methodsDavid Shaohua Li
Drivers should do this: .suspend() pci_disable_device() .resume() pci_enable_device() http://bugzilla.kernel.org/show_bug.cgi?id=3469 Signed-off-by: David Shaohua Li <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-07[PATCH] yenta: don't depend on CardBusDominik Brodowski
As a follow-up, we can allow the yenta-driver to be limited to PCMCIA operation. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07[PATCH] yenta: no CardBus if IRQ failsRussell King
If probing for the correct interrupt fails on yenta bridges, the driver falls back to polling for interrupt actions. However, CardBus cards cannot be used then. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07[PATCH] pcmcia: remove references to pcmcia/version.hDominik Brodowski
As a follow-up, remove the inclusion of pcmcia/version.h in many files. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07[PATCH] pcmcia: remove client services versionPavel Roskin
The Linux PCMCIA code has some data that was apparently used (or meant to be used) to ensure that only proper client drivers are loaded. This is now ensured (to a certain degree) by the fact that the most client drivers are part of the kernel. Also, the version information has not been updated despite major changes in PCMCIA API. This has made it meaningless. This patch removes servinfo_t and pcmcia_get_card_services_info. They are not used in any userspace utilities such as pcmcia-cs and pcmciautils. drivers/pcmcia/pcmcia_ioctl.c is adjusted accordingly. CS_RELEASE and CS_RELEASE_CODE are removed. include/pcmcia/version.h is empty now. It will be removed later, but for now it's left in the tree to avoid touching all PCMCIA clients. The only driver that needs to be changed is drivers/scsi/pcmcia/nsp_cs.c, which uses CS_RELEASE_CODE. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07[PATCH] pcmcia: reduce client_handle_t usageDominik Brodowski
Reduce the occurences of "client_handle_t" which is nothing else than a pointer to struct pcmcia_device by now. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07[PATCH] pcmcia: remove client_t usageDominik Brodowski
Reduce the occurences of "client_handle_t" which is nothing else than a pointer to struct pcmcia_device by now. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07[PATCH] pcmcia: move event handlerDominik Brodowski
Move the "event handler" to struct pcmcia_driver -- the unified event handler will disappear really soon, but switching it to struct pcmcia_driver in the meantime allows for better "step-by-step" patches. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07[PATCH] pcmcia: deprecate ioctlDominik Brodowski
Schedule removal of the PCMCIA ioctl (and thus kernel support for the pcmcia-cs userspace package) for November 2005. A big "thank you" to Dave Hinds for his great work on supporting PCMCIA in Linux. Things are just done differently by now, so the ongoing work to make PCMCIA behave like any other hotpluggable bus should continue. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>