aboutsummaryrefslogtreecommitdiff
path: root/drivers/s390/block/dasd_int.h
AgeCommit message (Collapse)Author
2008-01-26[S390] dasd: add hyper PAV support to DASD device driver, part 1Stefan Weinhuber
Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-12[S390] is_power_of_2 in drivers/s390/block/dasd_int.hvignesh babu
Replacing n & (n - 1) for power of 2 check by is_power_of_2(n) Signed-off-by: vignesh babu <vignesh.babu@wipro.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-07-24[BLOCK] Get rid of request_queue_t typedefJens Axboe
Some of the code has been gradually transitioned to using the proper struct request_queue, but there's lots left. So do a full sweet of the kernel and get rid of this typedef and replace its uses with the proper type. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-05-04[S390] dasd: New read device characteristics and read configuration data.Cornelia Huck
Instead of the deprecated read_dev_chars() and read_conf_data_lpm(), implement dasd_generic_read_dev_chars() and dasd_eckd_read_conf_lpm(). These should even recover better from error than the original cio functions. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05[S390] Remove dasd_ccw_log function.Horst Hummel
Logging of relevant information is already done by disciplines dump_sense function. Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-12-08[S390] New DASD feature for ERP related loggingHorst Hummel
It is now possible to enable/disable ERP related logging without re-compile and re-ipl. A additional sysfs-attribute 'erplog' allows to switch the logging non-interruptive. Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-12-07[PATCH] slab: remove kmem_cache_tChristoph Lameter
Replace all uses of kmem_cache_t with struct kmem_cache. The patch was generated using the following script: #!/bin/sh # # Replace one string by another in all the kernel sources. # set -e for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do quilt add $file sed -e "1,\$s/$1/$2/g" $file >/tmp/$$ mv /tmp/$$ $file quilt refresh done The script was run like this sh replace kmem_cache_t "struct kmem_cache" Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-20[S390] dasd deadlock after state change pending interrupt.Martin Schwidefsky
The dasd_device_from_cdev function is called from interrupt context to get the struct dasd_device associated with a ccw device. The driver_data of the ccw device points to the dasd_devmap structure which contains the pointer to the dasd_device structure. The lock that protects the dasd_devmap structure is acquire with out irqsave. To prevent the deadlock in dasd_device_from_cdev if it is called from interrupt context the dependency to the dasd_devmap structure needs to be removed. Let the driver_data of the ccw device point to the dasd_device structure directly and use the ccw device lock to protect the access. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/devfs-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/devfs-2.6: (22 commits) [PATCH] devfs: Remove it from the feature_removal.txt file [PATCH] devfs: Last little devfs cleanups throughout the kernel tree. [PATCH] devfs: Rename TTY_DRIVER_NO_DEVFS to TTY_DRIVER_DYNAMIC_DEV [PATCH] devfs: Remove the tty_driver devfs_name field as it's no longer needed [PATCH] devfs: Remove the line_driver devfs_name field as it's no longer needed [PATCH] devfs: Remove the videodevice devfs_name field as it's no longer needed [PATCH] devfs: Remove the gendisk devfs_name field as it's no longer needed [PATCH] devfs: Remove the miscdevice devfs_name field as it's no longer needed [PATCH] devfs: Remove the devfs_fs_kernel.h file from the tree [PATCH] devfs: Remove devfs_remove() function from the kernel tree [PATCH] devfs: Remove devfs_mk_cdev() function from the kernel tree [PATCH] devfs: Remove devfs_mk_bdev() function from the kernel tree [PATCH] devfs: Remove devfs_mk_symlink() function from the kernel tree [PATCH] devfs: Remove devfs_mk_dir() function from the kernel tree [PATCH] devfs: Remove devfs_*_tape() functions from the kernel tree [PATCH] devfs: Remove devfs support from the sound subsystem [PATCH] devfs: Remove devfs support from the ide subsystem. [PATCH] devfs: Remove devfs support from the serial subsystem [PATCH] devfs: Remove devfs from the init code [PATCH] devfs: Remove devfs from the partition code ...
2006-06-29[S390] add PAV support to the dasd driver.Horst Hummel
Add support for parallel-access-volumes to the dasd driver. This allows concurrent access to dasd devices with multiple channel programs. Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29[S390] dasd whitespace and other cosmetics.Horst Hummel
Dasd code cleanup: 1) remove white space, 2) remove the emacs override sections, and 3) use kzalloc instead of kmalloc. Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-26[PATCH] devfs: Remove the devfs_fs_kernel.h file from the treeGreg Kroah-Hartman
Also fixes up all files that #include it. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-28[PATCH] s390: dasd device identifiersHorst Hummel
Generate new sysfs-attribute 'uid' that contains an device specific unique identifier. This can be used to identity multiple ALIASES of the same physical device (PAV). In addition the sysfs-attributes 'vendor' (containing the manufacturer of the device) and 'alias' (identify alias or base device) is added. This is first part of PAV support in LPAR (also valid on zVM). Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24[PATCH] s390: dasd extended error reportingStefan Weinhuber
The DASD extended error reporting is a facility that allows to get detailed information about certain problems in the DASD I/O. This information can be used to implement fail-over applications that can recover these problems. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24[PATCH] s390: remove dynamic dasd ioctlsChristoph Hellwig
Now that there are no more users of the awkward dynamic ioctl hack we can remove the code to support it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24[PATCH] s390: use normal switch statement for ioctls in dasd_ioctlcChristoph Hellwig
Add an ->ioctl method to the dasd_discipline structure. This allows to apply the same kind of cleanups the last patch applied to dasd_ioctl.c to dasd_eckd.c (the only dasd discipline with special ioctls) aswell. Again lots of code removed. During auditing the ioctls I found two fishy return value propagations from copy_{from,to}_user, maintainers please check those, I've marked them with XXX comments. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24[PATCH] s390: use normal switch statement for ioctls in dasd_ioctlcChristoph Hellwig
Handle ioctls implemented in dasd_ioctl through the normal switch statement that most drivers use instead of the awkward dasd_ioctl_no_register routine. This avoids searching a linear list on every call to dasd_ioctl(), and allows to give the various ioctl implementation functions sane prototypes, aswell as moving the check for bdev->bd_disk->private_data from the individual functions to dasd_ioctl. (I think it can't actually every be NULL, but let's keep that for later) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-08[PATCH] s390: dasd partition detectionHorst Hummel
DASD allows to open a device as soon as gendisk is registered, which means the device is a fake device (capacity=0) and we do know nothing about blocksize and partitions at that point of time. In case the device is opened by someone, the bdev and inode creation is done with the fake device info and the following partition detection code is just using the wrong data. To avoid this modify the DASD state machine to make sure that the open is rejected until the device analysis is either finished or an unformatted device was detected. Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-20[PATCH] s390: revert dasd eer moduleHeiko Carstens
Revert dasd eer module until we have a common understanding of how the interface should be. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-20[PATCH] s390: dasd reference countingPeter Oberparleiter
When using the dasd diag discipline, the base discipline module (eckd or fba) can be unloaded, even though the dasd driver requires both discipline modules (base and diag) to work correctly. Implement reference counting for both base and diag discipline modules in order to fix this. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] s390: dasd extended error reporting moduleStefan Weinhuber
The DASD extended error reporting is a facility that allows to get detailed information about certain problems in the DASD I/O. This information can be used to implement fail-over applications that can recover these problems. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01[PATCH] s390: Remove CVS generated informationHeiko Carstens
- Remove all CVS generated information like e.g. revision IDs from drivers/s390 and include/asm-s390 (none present in arch/s390). - Add newline at end of arch/s390/lib/Makefile to avoid diff message. Acked-by: Andreas Herrmann <aherrman@de.ibm.com> Acked-by: Frank Pavlic <pavlic@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] add ->compat_ioctl to dasdChristoph Hellwig
Add a compat_ioctl method to the dasd driver so the last entries in arch/s390/kernel/compat_ioctl.c can go away. Unlike the previous attempt this one does not replace the ioctl method with an unlocked_ioctl method so that the ioctl_by_bdev calls in s390 partition code continue to work. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] s390: dasd failfast supportHorst Hummel
To properly support multipath-failover handling, the linux block layer has introduced a special request flag, 'REQ_FAILFAST'. This flag is now used to return requests immediately in case the device is not operational. Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[PATCH] s390: deadlock in dasd_devmapHorst Hummel
Reintroduce a read-only copy of the devmap features in the device struct. This is necessary to solve a deadlock on the dasd_devmap_lock which is acquired by dasd_get_features called from the dasd tasklet. The current implementation of devmap doesn't allow to call any devmap function from interrupt or softirq context. Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01[PATCH] s390: dasd readonly attributeHorst Hummel
The independent read-only flags in devmap, dasd_device and gendisk are not kept in sync. Use one bit per feature in the dasd driver and keep that bit in sync with the gendisk bit. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!